Skip to contentSkip to conversation

ice: fix DFLT Rx rule handling for promisc and switchdev

PATCH In review Petr Oros 4 participants 6 messages Jul 8 – Sep 10

Subsystems (3)
lore
Share & tools
lore

Petr Oros

author
#0 lore raw

v4 cover ice: fix DFLT Rx rule handling for promisc and switchdev

Two fixes for the uplink default VSI Rx rule (DFLT) on E810 when the netdev is in IFF_PROMISC.

Patch 1 drops the redundant per-VLAN promisc expansion that exhausts the FLU pool on a wide VLAN trunk across several PFs.

Patch 2 keeps the DFLT Rx rule across a switchdev teardown instead of clobbering the promisc state the operator asked for.

Changes since v3 (review comments from Marcin Szycik):
- Patch 1: reworded the ice_clear_promisc() and the per-VID cleanup comments, and flipped the ice_vsi_clear_vlan_mc_promisc() guard to an early return (noting the clear is best-effort). No functional change.
- Patch 2: no change, added Marcin's and Aleksandr's Reviewed-by.

Link to v3:
https://lore.kernel.org/all/[email protected]/

Link to v2:
https://lore.kernel.org/all/[email protected]/

Link to v1:
https://lore.kernel.org/all/[email protected]/

Petr Oros (2):
ice: skip per-VLAN promisc rules when default VSI Rx rule is set
ice: preserve uplink DFLT Rx rule on switchdev release

 drivers/net/ethernet/intel/ice/ice_eswitch.c |  18 ++-
 drivers/net/ethernet/intel/ice/ice_main.c    | 109 +++++++++++++++----
 2 files changed, 102 insertions(+), 25 deletions(-)
Signature · 1 line
2.54.0
author
#1 lore raw

PATCH v4 1/2 ice: skip per-VLAN promisc rules when default VSI Rx rule is set

When an ice port in a vlan-filtering bridge goes promiscuous (typical for bond slaves), the driver installs a per-VLAN ICE_SW_LKUP_PROMISC_VLAN rule for every VID on top of the broad ICE_SW_LKUP_DFLT VSI Rx rule. Each rule consumes one of the ~32K Flow Lookup Unit (FLU) entries the device shares across PFs, so a wide trunk (vid 2-4094) over several PFs overruns the
pool: firmware rejects further Add Switch Rules with ENOSPC (AQ 0x10) and the DFLT Rx rule itself fails to install:

ice 0000:5c:00.1: Failed to set VSI 14 as the default forwarding
VSI, error -5
ice 0000:5c:00.1 ens1f1: Error -5 setting default VSI 14 Rx rule

Once a switch context is overrun the retries can also come back as ENOENT (AQ 0x2), which has misled triage toward a perceived recipe binding defect rather than a capacity issue.

The DFLT rule already catches every packet on the port regardless of VLAN tag, so the per-VLAN promisc expansion is redundant while it is installed. Skip it at the two sites that drive it, ice_set_promisc() and ice_vlan_rx_add_vid(), keyed on ice_is_vsi_dflt_vsi() rather than the netdev IFF_PROMISC flag so a failed or LAG-suppressed DFLT install still falls back to the per-VLAN rules.

IFF_ALLMULTI and IFF_PROMISC can reach ice_vsi_sync_fltr() in separate passes (a bridge join sets them through separate calls), so the allmulti pass may expand the per-VID rules before the DFLT rule exists. Drop those now-redundant rules right after ice_set_dflt_vsi() installs the DFLT rule; ice_vsi_exit_dflt_promisc() reinstates them when promisc is cleared.

ice_vsi_sync_fltr() subscribed multicast promiscuity only inside the "default VSI not yet in use" branch, so a promiscuous VSI that finds the default VSI rule already present (owned by another VSI, or preserved across a switchdev session) ended up in unicast promisc with no multicast subscription. Issue ice_set_promisc(ICE_MCAST_PROMISC_BITS) whenever the netdev is promiscuous; it is idempotent and returns 0 if the rule is already present.

Fixes 1273f89578f2 ("ice: Fix broken IFF_ALLMULTI handling")

---
v4 (review comments from Marcin Szycik):
- Reworded the ice_clear_promisc() and the per-VID cleanup comments.
- Flipped the ice_vsi_clear_vlan_mc_promisc() guard to an early return to reduce indentation, and noted that the clear is best-effort.
No functional change.

v3: https://lore.kernel.org/all/[email protected]/
v2: https://lore.kernel.org/all/[email protected]/
v1: https://lore.kernel.org/all/89efbea9831175e6f57e9fe8557f7a0e48e050b7.1781786935.git.poros@redhat.com/

---
 drivers/net/ethernet/intel/ice/ice_main.c | 109 +++++++++++++++++-----
 1 file changed, 88 insertions(+), 21 deletions(-)
drivers/net/ethernet/intel/ice/ice_main.c +88 -21
index b43d420ece99ca..f1fef26eeadac9 100644
@@ -274,7 +274,8 @@ static int ice_set_promisc(struct ice_vsi *vsi, u8 promisc_m)
 	if (vsi->type != ICE_VSI_PF)
 		return 0;
 
-	if (ice_vsi_has_non_zero_vlans(vsi)) {
+	/* skip per-VID expansion; the DFLT Rx rule already covers every VID */
+	if (ice_vsi_has_non_zero_vlans(vsi) && !ice_is_vsi_dflt_vsi(vsi)) {
 		promisc_m |= (ICE_PROMISC_VLAN_RX | ICE_PROMISC_VLAN_TX);
 		status = ice_fltr_set_vlan_vsi_promisc(&vsi->back->hw, vsi,
 						       promisc_m);
@@ -304,9 +305,20 @@ static int ice_clear_promisc(struct ice_vsi *vsi, u8 promisc_m)
 		return 0;
 
 	if (ice_vsi_has_non_zero_vlans(vsi)) {
-		promisc_m |= (ICE_PROMISC_VLAN_RX | ICE_PROMISC_VLAN_TX);
+		u8 vlan_promisc_m = promisc_m | ICE_PROMISC_VLAN_RX |
+				    ICE_PROMISC_VLAN_TX;
+		int vid0_status;
+
+		/* the vid=0 rule may be in either recipe (the recipe used to
+		 * set it is not recorded), so clear both; clearing an absent
+		 * rule returns 0
+		 */
 		status = ice_fltr_clear_vlan_vsi_promisc(&vsi->back->hw, vsi,
-							 promisc_m);
+							 vlan_promisc_m);
+		vid0_status = ice_fltr_clear_vsi_promisc(&vsi->back->hw,
+							 vsi->idx, promisc_m, 0);
+		if (!status)
+			status = vid0_status;
 	} else {
 		status = ice_fltr_clear_vsi_promisc(&vsi->back->hw, vsi->idx,
 						    promisc_m, 0);
@@ -317,6 +329,61 @@ static int ice_clear_promisc(struct ice_vsi *vsi, u8 promisc_m)
 	return status;
 }
 
+/**
+ * ice_vsi_exit_dflt_promisc - drop the default VSI Rx rule on promisc off
+ * @vsi: the VSI leaving promiscuous mode
+ *
+ * For an IFF_ALLMULTI VSI with VLANs the per-VID multicast rules are
+ * reinstated before the default rule is cleared so coverage never lapses;
+ * the then redundant vid=0 rule is dropped best-effort. The callees log
+ * their own failures, so error returns are not re-logged here.
+ *
+ * Return: 0 on success, negative on error with the default rule left in place.
+ */
+static int ice_vsi_exit_dflt_promisc(struct ice_vsi *vsi)
+{
+	struct ice_vsi_vlan_ops *vlan_ops = ice_get_compat_vsi_vlan_ops(vsi);
+	struct net_device *netdev = vsi->netdev;
+	struct ice_hw *hw = &vsi->back->hw;
+	bool restore_mc;
+	int err;
+
+	restore_mc = (vsi->current_netdev_flags & IFF_ALLMULTI) &&
+		     ice_vsi_has_non_zero_vlans(vsi);
+
+	if (restore_mc) {
+		err = ice_fltr_set_vlan_vsi_promisc(hw, vsi,
+						    ICE_MCAST_VLAN_PROMISC_BITS);
+		if (err && err != -EEXIST)
+			return err;
+	}
+
+	err = ice_clear_dflt_vsi(vsi);
+	if (err)
+		return err;
+
+	if (netdev->features & NETIF_F_HW_VLAN_CTAG_FILTER)
+		vlan_ops->ena_rx_filtering(vsi);
+
+	if (restore_mc)
+		ice_fltr_clear_vsi_promisc(hw, vsi->idx, ICE_MCAST_PROMISC_BITS,
+					   0);
+
+	return 0;
+}
+
+/* Drop the per-VID multicast promisc rules made redundant by the default
+ * VSI Rx rule; best-effort, a leftover is harmless while that rule stands.
+ */
+static void ice_vsi_clear_vlan_mc_promisc(struct ice_vsi *vsi)
+{
+	if (!ice_vsi_has_non_zero_vlans(vsi))
+		return;
+
+	ice_fltr_clear_vlan_vsi_promisc(&vsi->back->hw, vsi,
+					ICE_MCAST_VLAN_PROMISC_BITS);
+}
+
 /**
  * ice_vsi_sync_fltr - Update the VSI filter list to the HW
  * @vsi: ptr to the VSI
@@ -429,30 +496,31 @@ static int ice_vsi_sync_fltr(struct ice_vsi *vsi)
 				err = 0;
 				vlan_ops->dis_rx_filtering(vsi);
 
-				/* promiscuous mode implies allmulticast so
-				 * that VSIs that are in promiscuous mode are
-				 * subscribed to multicast packets coming to
-				 * the port
+				/* a prior allmulti pass may have added per-VID
+				 * rules now covered by the DFLT rule
 				 */
-				err = ice_set_promisc(vsi,
-						      ICE_MCAST_PROMISC_BITS);
-				if (err)
-					goto out_promisc;
+				ice_vsi_clear_vlan_mc_promisc(vsi);
 			}
+
+			/* Promiscuous mode implies allmulticast. Subscribe
+			 * the VSI to all multicast even when the default VSI
+			 * rule is already in use and the block above is
+			 * skipped (it may be owned by another VSI, or
+			 * preserved across a switchdev session); the unicast
+			 * catch-all does not cover the multicast subscription.
+			 */
+			err = ice_set_promisc(vsi, ICE_MCAST_PROMISC_BITS);
+			if (err)
+				goto out_promisc;
 		} else {
 			/* Clear Rx filter to remove traffic from wire */
 			if (ice_is_vsi_dflt_vsi(vsi)) {
-				err = ice_clear_dflt_vsi(vsi);
+				err = ice_vsi_exit_dflt_promisc(vsi);
 				if (err) {
-					netdev_err(netdev, "Error %d clearing default VSI %i Rx rule\n",
-						   err, vsi->vsi_num);
 					vsi->current_netdev_flags |=
 						IFF_PROMISC;
 					goto out_promisc;
 				}
-				if (vsi->netdev->features &
-				    NETIF_F_HW_VLAN_CTAG_FILTER)
-					vlan_ops->ena_rx_filtering(vsi);
 			}
 
 			/* disable allmulti here, but only if allmulti is not
@@ -3676,10 +3744,9 @@ int ice_vlan_rx_add_vid(struct net_device *netdev, __be16 proto, u16 vid)
 	while (test_and_set_bit(ICE_CFG_BUSY, vsi->state))
 		usleep_range(1000, 2000);
 
-	/* Add multicast promisc rule for the VLAN ID to be added if
-	 * all-multicast is currently enabled.
-	 */
-	if (vsi->current_netdev_flags & IFF_ALLMULTI) {
+	/* skip the per-VID rule when the DFLT Rx rule already covers this VID */
+	if ((vsi->current_netdev_flags & IFF_ALLMULTI) &&
+	    !ice_is_vsi_dflt_vsi(vsi)) {
 		ret = ice_fltr_set_vsi_promisc(&vsi->back->hw, vsi->idx,
 					       ICE_MCAST_VLAN_PROMISC_BITS,
 					       vid);
Signature · 1 line
2.54.0
Reviewed-by on v4 1/2
#2 lore raw

Re: [Intel-wired-lan] [PATCH iwl-net v4 1/2] ice: skip per-VLAN promisc rules when default VSI Rx rule is set

Quoted 37 lines · Petr Oros

When an ice port in a vlan-filtering bridge goes promiscuous (typical for bond slaves), the driver installs a per-VLAN ICE_SW_LKUP_PROMISC_VLAN rule for every VID on top of the broad ICE_SW_LKUP_DFLT VSI Rx rule. Each rule consumes one of the ~32K Flow Lookup Unit (FLU) entries the device shares across PFs, so a wide trunk (vid 2-4094) over several PFs overruns the
pool: firmware rejects further Add Switch Rules with ENOSPC (AQ 0x10) and the DFLT Rx rule itself fails to install:

ice 0000:5c:00.1: Failed to set VSI 14 as the default forwarding
VSI, error -5
ice 0000:5c:00.1 ens1f1: Error -5 setting default VSI 14 Rx rule

Once a switch context is overrun the retries can also come back as ENOENT (AQ 0x2), which has misled triage toward a perceived recipe binding defect rather than a capacity issue.

The DFLT rule already catches every packet on the port regardless of VLAN tag, so the per-VLAN promisc expansion is redundant while it is installed. Skip it at the two sites that drive it, ice_set_promisc() and ice_vlan_rx_add_vid(), keyed on ice_is_vsi_dflt_vsi() rather than the netdev IFF_PROMISC flag so a failed or LAG-suppressed DFLT install still falls back to the per-VLAN rules.

IFF_ALLMULTI and IFF_PROMISC can reach ice_vsi_sync_fltr() in separate passes (a bridge join sets them through separate calls), so the allmulti pass may expand the per-VID rules before the DFLT rule exists. Drop those now-redundant rules right after ice_set_dflt_vsi() installs the DFLT rule; ice_vsi_exit_dflt_promisc() reinstates them when promisc is cleared.

ice_vsi_sync_fltr() subscribed multicast promiscuity only inside the "default VSI not yet in use" branch, so a promiscuous VSI that finds the default VSI rule already present (owned by another VSI, or preserved across a switchdev session) ended up in unicast promisc with no multicast subscription. Issue ice_set_promisc(ICE_MCAST_PROMISC_BITS) whenever the netdev is promiscuous; it is idempotent and returns 0 if the rule is already present.

Quoted 2 lines
Fixes 1273f89578f2 ("ice: Fix broken IFF_ALLMULTI handling")

LGTM

Quoted 173 lines

---
v4 (review comments from Marcin Szycik):
- Reworded the ice_clear_promisc() and the per-VID cleanup comments.
- Flipped the ice_vsi_clear_vlan_mc_promisc() guard to an early return to reduce indentation, and noted that the clear is best-effort.
No functional change.

v3: https://lore.kernel.org/all/[email protected]/
v2: https://lore.kernel.org/all/[email protected]/
v1: https://lore.kernel.org/all/89efbea9831175e6f57e9fe8557f7a0e48e050b7.1781786935.git.poros@redhat.com/

---
 drivers/net/ethernet/intel/ice/ice_main.c | 109 +++++++++++++++++-----
 1 file changed, 88 insertions(+), 21 deletions(-)
drivers/net/ethernet/intel/ice/ice_main.c +88 -21
index b43d420ece99ca..f1fef26eeadac9 100644
@@ -274,7 +274,8 @@ static int ice_set_promisc(struct ice_vsi *vsi, u8 promisc_m)
 	if (vsi->type != ICE_VSI_PF)
 		return 0;
 
-	if (ice_vsi_has_non_zero_vlans(vsi)) {
+	/* skip per-VID expansion; the DFLT Rx rule already covers every VID */
+	if (ice_vsi_has_non_zero_vlans(vsi) && !ice_is_vsi_dflt_vsi(vsi)) {
 		promisc_m |= (ICE_PROMISC_VLAN_RX | ICE_PROMISC_VLAN_TX);
 		status = ice_fltr_set_vlan_vsi_promisc(&vsi->back->hw, vsi,
 						       promisc_m);
@@ -304,9 +305,20 @@ static int ice_clear_promisc(struct ice_vsi *vsi, u8 promisc_m)
 		return 0;
 
 	if (ice_vsi_has_non_zero_vlans(vsi)) {
-		promisc_m |= (ICE_PROMISC_VLAN_RX | ICE_PROMISC_VLAN_TX);
+		u8 vlan_promisc_m = promisc_m | ICE_PROMISC_VLAN_RX |
+				    ICE_PROMISC_VLAN_TX;
+		int vid0_status;
+
+		/* the vid=0 rule may be in either recipe (the recipe used to
+		 * set it is not recorded), so clear both; clearing an absent
+		 * rule returns 0
+		 */
 		status = ice_fltr_clear_vlan_vsi_promisc(&vsi->back->hw, vsi,
-							 promisc_m);
+							 vlan_promisc_m);
+		vid0_status = ice_fltr_clear_vsi_promisc(&vsi->back->hw,
+							 vsi->idx, promisc_m, 0);
+		if (!status)
+			status = vid0_status;
 	} else {
 		status = ice_fltr_clear_vsi_promisc(&vsi->back->hw, vsi->idx,
 						    promisc_m, 0);
@@ -317,6 +329,61 @@ static int ice_clear_promisc(struct ice_vsi *vsi, u8 promisc_m)
 	return status;
 }
 
+/**
+ * ice_vsi_exit_dflt_promisc - drop the default VSI Rx rule on promisc off
+ * @vsi: the VSI leaving promiscuous mode
+ *
+ * For an IFF_ALLMULTI VSI with VLANs the per-VID multicast rules are
+ * reinstated before the default rule is cleared so coverage never lapses;
+ * the then redundant vid=0 rule is dropped best-effort. The callees log
+ * their own failures, so error returns are not re-logged here.
+ *
+ * Return: 0 on success, negative on error with the default rule left in place.
+ */
+static int ice_vsi_exit_dflt_promisc(struct ice_vsi *vsi)
+{
+	struct ice_vsi_vlan_ops *vlan_ops = ice_get_compat_vsi_vlan_ops(vsi);
+	struct net_device *netdev = vsi->netdev;
+	struct ice_hw *hw = &vsi->back->hw;
+	bool restore_mc;
+	int err;
+
+	restore_mc = (vsi->current_netdev_flags & IFF_ALLMULTI) &&
+		     ice_vsi_has_non_zero_vlans(vsi);
+
+	if (restore_mc) {
+		err = ice_fltr_set_vlan_vsi_promisc(hw, vsi,
+						    ICE_MCAST_VLAN_PROMISC_BITS);
+		if (err && err != -EEXIST)
+			return err;
+	}
+
+	err = ice_clear_dflt_vsi(vsi);
+	if (err)
+		return err;
+
+	if (netdev->features & NETIF_F_HW_VLAN_CTAG_FILTER)
+		vlan_ops->ena_rx_filtering(vsi);
+
+	if (restore_mc)
+		ice_fltr_clear_vsi_promisc(hw, vsi->idx, ICE_MCAST_PROMISC_BITS,
+					   0);
+
+	return 0;
+}
+
+/* Drop the per-VID multicast promisc rules made redundant by the default
+ * VSI Rx rule; best-effort, a leftover is harmless while that rule stands.
+ */
+static void ice_vsi_clear_vlan_mc_promisc(struct ice_vsi *vsi)
+{
+	if (!ice_vsi_has_non_zero_vlans(vsi))
+		return;
+
+	ice_fltr_clear_vlan_vsi_promisc(&vsi->back->hw, vsi,
+					ICE_MCAST_VLAN_PROMISC_BITS);
+}
+
 /**
  * ice_vsi_sync_fltr - Update the VSI filter list to the HW
  * @vsi: ptr to the VSI
@@ -429,30 +496,31 @@ static int ice_vsi_sync_fltr(struct ice_vsi *vsi)
 				err = 0;
 				vlan_ops->dis_rx_filtering(vsi);
 
-				/* promiscuous mode implies allmulticast so
-				 * that VSIs that are in promiscuous mode are
-				 * subscribed to multicast packets coming to
-				 * the port
+				/* a prior allmulti pass may have added per-VID
+				 * rules now covered by the DFLT rule
 				 */
-				err = ice_set_promisc(vsi,
-						      ICE_MCAST_PROMISC_BITS);
-				if (err)
-					goto out_promisc;
+				ice_vsi_clear_vlan_mc_promisc(vsi);
 			}
+
+			/* Promiscuous mode implies allmulticast. Subscribe
+			 * the VSI to all multicast even when the default VSI
+			 * rule is already in use and the block above is
+			 * skipped (it may be owned by another VSI, or
+			 * preserved across a switchdev session); the unicast
+			 * catch-all does not cover the multicast subscription.
+			 */
+			err = ice_set_promisc(vsi, ICE_MCAST_PROMISC_BITS);
+			if (err)
+				goto out_promisc;
 		} else {
 			/* Clear Rx filter to remove traffic from wire */
 			if (ice_is_vsi_dflt_vsi(vsi)) {
-				err = ice_clear_dflt_vsi(vsi);
+				err = ice_vsi_exit_dflt_promisc(vsi);
 				if (err) {
-					netdev_err(netdev, "Error %d clearing default VSI %i Rx rule\n",
-						   err, vsi->vsi_num);
 					vsi->current_netdev_flags |=
 						IFF_PROMISC;
 					goto out_promisc;
 				}
-				if (vsi->netdev->features &
-				    NETIF_F_HW_VLAN_CTAG_FILTER)
-					vlan_ops->ena_rx_filtering(vsi);
 			}
 
 			/* disable allmulti here, but only if allmulti is not
@@ -3676,10 +3744,9 @@ int ice_vlan_rx_add_vid(struct net_device *netdev, __be16 proto, u16 vid)
 	while (test_and_set_bit(ICE_CFG_BUSY, vsi->state))
 		usleep_range(1000, 2000);
 
-	/* Add multicast promisc rule for the VLAN ID to be added if
-	 * all-multicast is currently enabled.
-	 */
-	if (vsi->current_netdev_flags & IFF_ALLMULTI) {
+	/* skip the per-VID rule when the DFLT Rx rule already covers this VID */
+	if ((vsi->current_netdev_flags & IFF_ALLMULTI) &&
+	    !ice_is_vsi_dflt_vsi(vsi)) {
 		ret = ice_fltr_set_vsi_promisc(&vsi->back->hw, vsi->idx,
 					       ICE_MCAST_VLAN_PROMISC_BITS,
 					       vid);
Tested-by on v4 1/2
#3 lore raw

RE: [Intel-wired-lan] [PATCH iwl-net v4 1/2] ice: skip per-VLAN promisc rules when default VSI Rx rule is set

In reply to Petr Oros
Quoted 33 lines

-----Original Message-----
From: Intel-wired-lan <[email protected]> On Behalf Of Petr Oros
Sent: 08 July 2026 18:28
To: [email protected]
Cc: Vecera, Ivan <[email protected]>; Alice Michael <[email protected]>; Kitszel, Przemyslaw <[email protected]>; Eric Dumazet <[email protected]>; [email protected]; Martyna Szapar-Mudlaw <[email protected]>; Andrew Lunn <[email protected]>; Marcin Szycik <[email protected]>; Nguyen, Anthony L <[email protected]>; Simon Horman <[email protected]>; [email protected]; Keller, Jacob E <[email protected]>; Jakub Kicinski <[email protected]>; Paolo Abeni <[email protected]>; David S. Miller <[email protected]>
Subject: [Intel-wired-lan] [PATCH iwl-net v4 1/2] ice: skip per-VLAN promisc rules when default VSI Rx rule is set

When an ice port in a vlan-filtering bridge goes promiscuous (typical for bond slaves), the driver installs a per-VLAN ICE_SW_LKUP_PROMISC_VLAN rule for every VID on top of the broad ICE_SW_LKUP_DFLT VSI Rx rule. Each rule consumes one of > the ~32K Flow Lookup Unit (FLU) entries the device shares across PFs, so a wide trunk (vid 2-4094) over several PFs overruns the
pool: firmware rejects further Add Switch Rules with ENOSPC (AQ 0x10) and the DFLT Rx rule itself fails to install:

ice 0000:5c:00.1: Failed to set VSI 14 as the default forwarding
VSI, error -5
ice 0000:5c:00.1 ens1f1: Error -5 setting default VSI 14 Rx rule

Once a switch context is overrun the retries can also come back as ENOENT (AQ 0x2), which has misled triage toward a perceived recipe binding defect rather than a capacity issue.

The DFLT rule already catches every packet on the port regardless of VLAN tag, so the per-VLAN promisc expansion is redundant while it is installed.
Skip it at the two sites that drive it, ice_set_promisc() and ice_vlan_rx_add_vid(), keyed on ice_is_vsi_dflt_vsi() rather than the netdev IFF_PROMISC flag so a failed or LAG-suppressed DFLT install still falls back to the per-VLAN rules.

IFF_ALLMULTI and IFF_PROMISC can reach ice_vsi_sync_fltr() in separate passes (a bridge join sets them through separate calls), so the allmulti pass may expand the per-VID rules before the DFLT rule exists. Drop those now-redundant rules right > after ice_set_dflt_vsi() installs the DFLT rule; ice_vsi_exit_dflt_promisc() reinstates them when promisc is cleared.

ice_vsi_sync_fltr() subscribed multicast promiscuity only inside the "default VSI not yet in use" branch, so a promiscuous VSI that finds the default VSI rule already present (owned by another VSI, or preserved across a switchdev session) ended up > in unicast promisc with no multicast subscription. Issue ice_set_promisc(ICE_MCAST_PROMISC_BITS) whenever the netdev is promiscuous; it is idempotent and returns 0 if the rule is already present.

Fixes 1273f89578f2 ("ice: Fix broken IFF_ALLMULTI handling")

---
v4 (review comments from Marcin Szycik):
- Reworded the ice_clear_promisc() and the per-VID cleanup comments.
- Flipped the ice_vsi_clear_vlan_mc_promisc() guard to an early return to reduce indentation, and noted that the clear is best-effort.
No functional change.

Quoted 7 lines

v3: https://lore.kernel.org/all/[email protected]/
v2: https://lore.kernel.org/all/[email protected]/
v1: https://lore.kernel.org/all/89efbea9831175e6f57e9fe8557f7a0e48e050b7.1781786935.git.poros@redhat.com/
---
drivers/net/ethernet/intel/ice/ice_main.c | 109 +++++++++++++++++-----

1 file changed, 88 insertions(+), 21 deletions(-)
author
#4 lore raw

PATCH v4 2/2 ice: preserve uplink DFLT Rx rule on switchdev release

In reply to Petr Oros

When the uplink PF is promiscuous, ice_vsi_sync_fltr() installs an ICE_SW_LKUP_DFLT catch-all Rx rule on the uplink VSI. Entering switchdev re-affirms it through the idempotent ice_set_dflt_vsi(), but ice_eswitch_release_env() removed both the Rx and Tx DFLT rules unconditionally on teardown. That clobbered a promisc-owned Rx rule: it disappeared while IFF_PROMISC was still set and the sync path was not retriggered, leaving the uplink without the catch-all the netdev requested.

Skip the Rx DFLT removal when the uplink is promiscuous, both in ice_eswitch_release_env() and the err_def_tx unwind of ice_eswitch_setup_env(); the Tx leg, owned by switchdev, is still removed. Test the live netdev->flags, the same value ena_rx_filtering() -> ice_cfg_vlan_pruning() above already keys on, so the preserved rule and the pruning state stay consistent, including for a promisc change made while switchdev ran (which never reached the gated filter sync).

Fixes 5c07be96d8b3 ("ice: Avoid setting default Rx VSI twice in switchdev setup")

---
v4:
- No code change, added Marcin's and Aleksandr's Reviewed-by.

v3: https://lore.kernel.org/all/[email protected]/
v2: https://lore.kernel.org/all/[email protected]/
v1: https://lore.kernel.org/all/deef5756e534ef06c12d910c5305d3fd205d30a0.1781786935.git.poros@redhat.com/

---
 drivers/net/ethernet/intel/ice/ice_eswitch.c | 18 ++++++++++++++----
 1 file changed, 14 insertions(+), 4 deletions(-)
drivers/net/ethernet/intel/ice/ice_eswitch.c +14 -4
index c30e27bbfe6e25..07e2016fb9481f 100644
@@ -66,8 +66,10 @@ static int ice_eswitch_setup_env(struct ice_pf *pf)
 	ice_cfg_dflt_vsi(uplink_vsi->port_info, uplink_vsi->idx, false,
 			 ICE_FLTR_TX);
 err_def_tx:
-	ice_cfg_dflt_vsi(uplink_vsi->port_info, uplink_vsi->idx, false,
-			 ICE_FLTR_RX);
+	/* keep the Rx DFLT rule if the uplink is promiscuous (see release_env) */
+	if (!(uplink_vsi->netdev->flags & IFF_PROMISC))
+		ice_cfg_dflt_vsi(uplink_vsi->port_info, uplink_vsi->idx,
+				 false, ICE_FLTR_RX);
 err_def_rx:
 	ice_vsi_del_vlan_zero(uplink_vsi);
 err_vlan_zero:
@@ -276,8 +278,16 @@ static void ice_eswitch_release_env(struct ice_pf *pf)
 	vlan_ops->ena_rx_filtering(uplink_vsi);
 	ice_cfg_dflt_vsi(uplink_vsi->port_info, uplink_vsi->idx, false,
 			 ICE_FLTR_TX);
-	ice_cfg_dflt_vsi(uplink_vsi->port_info, uplink_vsi->idx, false,
-			 ICE_FLTR_RX);
+
+	/* Keep the Rx DFLT rule if the uplink is promiscuous; it must outlive
+	 * the session. Test the live netdev->flags, the same value
+	 * ena_rx_filtering() -> ice_cfg_vlan_pruning() above keys its decision
+	 * on, so the preserved DFLT rule and the pruning state stay consistent.
+	 */
+	if (!(uplink_vsi->netdev->flags & IFF_PROMISC))
+		ice_cfg_dflt_vsi(uplink_vsi->port_info, uplink_vsi->idx,
+				 false, ICE_FLTR_RX);
+
 	ice_fltr_add_mac_and_broadcast(uplink_vsi,
 				       uplink_vsi->port_info->mac.perm_addr,
 				       ICE_FWD_TO_VSI);
Signature · 1 line
2.54.0
Tested-by on v4 2/2
#5 lore raw

RE: [Intel-wired-lan] [PATCH iwl-net v4 2/2] ice: preserve uplink DFLT Rx rule on switchdev release

Quoted 95 lines

-----Original Message-----
From: Intel-wired-lan <[email protected]> On Behalf Of Petr Oros
Sent: Wednesday, July 8, 2026 2:58 PM
To: [email protected]
Cc: Vecera, Ivan <[email protected]>; Martyna Szapar-Mudlaw <[email protected]>; Alice Michael <[email protected]>; Kitszel, Przemyslaw <[email protected]>; Eric Dumazet <[email protected]>; [email protected]; Loktionov, Aleksandr <[email protected]>; Andrew Lunn <[email protected]>; Marcin Szycik <[email protected]>; Nguyen, Anthony L <[email protected]>; Simon Horman <[email protected]>; intel- [email protected]; Keller, Jacob E <[email protected]>; Jakub Kicinski <[email protected]>; Paolo Abeni <[email protected]>; David S. Miller <[email protected]>
Subject: [Intel-wired-lan] [PATCH iwl-net v4 2/2] ice: preserve uplink DFLT Rx rule on switchdev release
Importance: High

When the uplink PF is promiscuous, ice_vsi_sync_fltr() installs an ICE_SW_LKUP_DFLT catch-all Rx rule on the uplink VSI. Entering switchdev re- affirms it through the idempotent ice_set_dflt_vsi(), but ice_eswitch_release_env() removed both the Rx and Tx DFLT rules unconditionally on teardown. That clobbered a promisc-owned Rx rule: it disappeared while IFF_PROMISC was still set and the sync path was not retriggered, leaving the uplink without the catch-all the netdev requested.

Skip the Rx DFLT removal when the uplink is promiscuous, both in ice_eswitch_release_env() and the err_def_tx unwind of ice_eswitch_setup_env(); the Tx leg, owned by switchdev, is still removed. Test the live netdev->flags, the same value ena_rx_filtering() -> ice_cfg_vlan_pruning() above already keys on, so the preserved rule and the pruning state stay consistent, including for a promisc change made while switchdev ran (which never reached the gated filter sync).

Fixes 5c07be96d8b3 ("ice: Avoid setting default Rx VSI twice in switchdev

setup")

---
v4:
- No code change, added Marcin's and Aleksandr's Reviewed-by.

v3: https://lore.kernel.org/all/20260701133601.2118382-3-
[email protected]/
v2: https://lore.kernel.org/all/20260622113428.2565255-3-
[email protected]/
v1:
https://lore.kernel.org/all/deef5756e534ef06c12d910c5305d3fd205d30a0.
[email protected]/

---
 drivers/net/ethernet/intel/ice/ice_eswitch.c | 18 ++++++++++++++----
 1 file changed, 14 insertions(+), 4 deletions(-)
drivers/net/ethernet/intel/ice/ice_eswitch.c +4 -2
index c30e27bbfe6e25..07e2016fb9481f 100644
@@ -66,8 +66,10 @@ static int ice_eswitch_setup_env(struct ice_pf *pf)
 	ice_cfg_dflt_vsi(uplink_vsi->port_info, uplink_vsi->idx, false,
 			 ICE_FLTR_TX);
 err_def_tx:
-	ice_cfg_dflt_vsi(uplink_vsi->port_info, uplink_vsi->idx, false,
-			 ICE_FLTR_RX);
+	/* keep the Rx DFLT rule if the uplink is promiscuous (see release_env)
 */
+	if (!(uplink_vsi->netdev->flags & IFF_PROMISC))
+		ice_cfg_dflt_vsi(uplink_vsi->port_info, uplink_vsi->idx,
+				 false, ICE_FLTR_RX);
 err_def_rx:
 	ice_vsi_del_vlan_zero(uplink_vsi);

err_vlan_zero:

drivers/net/ethernet/intel/ice/ice_eswitch.c +10 -2
@@ -276,8 +278,16 @@ static void ice_eswitch_release_env(struct ice_pf
 *pf)
 	vlan_ops->ena_rx_filtering(uplink_vsi);
 	ice_cfg_dflt_vsi(uplink_vsi->port_info, uplink_vsi->idx, false,
 			 ICE_FLTR_TX);
-	ice_cfg_dflt_vsi(uplink_vsi->port_info, uplink_vsi->idx, false,
-			 ICE_FLTR_RX);
+
+	/* Keep the Rx DFLT rule if the uplink is promiscuous; it must outlive
+	 * the session. Test the live netdev->flags, the same value
+	 * ena_rx_filtering() -> ice_cfg_vlan_pruning() above keys its decision
+	 * on, so the preserved DFLT rule and the pruning state stay consistent.
+	 */
+	if (!(uplink_vsi->netdev->flags & IFF_PROMISC))
+		ice_cfg_dflt_vsi(uplink_vsi->port_info, uplink_vsi->idx,
+				 false, ICE_FLTR_RX);
+
 	ice_fltr_add_mac_and_broadcast(uplink_vsi,
 				       uplink_vsi->port_info->mac.perm_addr,
Quoted 3 lines

ICE_FWD_TO_VSI);
--
2.54.0