drm/panel: ilitek-ili9805: convert to *_multi API
v4 cover drm/panel: ilitek-ili9805: convert to *_multi API
This series converts panel-ilitek-ili9805 to the mipi_dsi_*_multi helpers and cleans up the resulting code.
Patch 1: Convert the individual DSI calls to their *_multi variants
Patch 2: Replace the ILI9805_INSTR table with per panel init functions using the *_multi API, dropping struct ili9805_instr
Patch 3: makes ili9805_power_off() and ili9805_deactivate() return void, since no one checks their return values.
Michail Tatas (3):
drm/panel: ilitek-ili9805: Use _multi variants drm/panel: ilitek-ili9805: Use dsi_multi in init drm/panel: ilitek-ili9805: make cleanup funcs void
drivers/gpu/drm/panel/panel-ilitek-ili9805.c | 212 ++++++++----------- 1 file changed, 87 insertions(+), 125 deletions(-)
Signature · 28 lines
Changes in v4: Addresses review feedback from Doug on v3 - Delete unused field name in struct ili9805_desc - convert MIPI_DCS_SET_PIXEL_FORMAT from mipi_dsi_dcs_write_seq_multi() to mipi_dsi_dcs_set_pixel_format_multi() Changes in v3: Addresses review feedback from Doug on v2 - Convert hex to lowercase - Align to match open parenthesis - Change lines to not cross 100 chars Changes in v2: Addresses review feedback from Doug on v1 - Patch 1 remains the same as v1 - Added patch 2 dropping struct ili9805_instr and used per-panel init functions - Added patch 3 making the cleanup functions return void Revisions - v1: https://lore.kernel.org/all/allWpYxgHfpKughy@michalis-linux/ - v2: https://lore.kernel.org/all/[email protected]/ - v3: https://lore.kernel.org/all/[email protected]/ The changes are compile tested only. Also I run checkpatch.pl --strict, sparse, smatch, gcc W=1, clang W=1 and coccinelle. 2.43.0
PATCH v4 1/3 drm/panel: ilitek-ili9805: Use _multi variants
Convert functions mipi_dsi_* to mipi_dsi_*_multi as per the gpu/todo file.
The multi variant of these functions include improved error handling.
--- drivers/gpu/drm/panel/panel-ilitek-ili9805.c | 51 +++++--------------- 1 file changed, 13 insertions(+), 38 deletions(-)
drivers/gpu/drm/panel/panel-ilitek-ili9805.c +13 -38
@@ -159,36 +159,23 @@ static int ili9805_power_off(struct ili9805 *ctx)static int ili9805_activate (struct ili9805 *ctx) { -struct mipi_dsi_device *dsi = ctx->dsi; -struct device *dev = &dsi->dev; -int i, ret; +struct mipi_dsi_multi_context dsi_ctx = { .dsi = ctx->dsi }; +int i;for (i =0 ; i < ctx->desc->init_length; i++) {const struct ili9805_instr *instr = &ctx->desc->init[i]; - ret =mipi_dsi_dcs_write_buffer (ctx->dsi, instr->data, instr->len); -if (ret <0 ) -return ret; +mipi_dsi_dcs_write_buffer_multi (&dsi_ctx, instr->data, instr->len);if (instr->delay >0 ) -msleep (instr->delay); - } - - ret =mipi_dsi_dcs_exit_sleep_mode (ctx->dsi); -if (ret) { -dev_err (dev,"Failed to exit sleep mode (%d)\n" , ret); -return ret; +mipi_dsi_msleep (&dsi_ctx, instr->delay); } -usleep_range (5000 ,6000 ); +mipi_dsi_dcs_exit_sleep_mode_multi (&dsi_ctx); +mipi_dsi_usleep_range (&dsi_ctx,5000 ,6000 ); +mipi_dsi_dcs_set_display_on_multi (&dsi_ctx); - ret =mipi_dsi_dcs_set_display_on (ctx->dsi); -if (ret) { -dev_err (dev,"Failed to set display ON (%d)\n" , ret); -return ret; - } - -return 0 ; +return dsi_ctx.accum_err; }static int ili9805_prepare (struct drm_panel *panel)
@@ -211,25 +198,13 @@ static int ili9805_prepare(struct drm_panel *panel)static int ili9805_deactivate (struct ili9805 *ctx) { -struct mipi_dsi_device *dsi = ctx->dsi; -struct device *dev = &dsi->dev; -int ret; - - ret =mipi_dsi_dcs_set_display_off (ctx->dsi); -if (ret <0 ) { -dev_err (dev,"Failed to set display OFF (%d)\n" , ret); -return ret; - } +struct mipi_dsi_multi_context dsi_ctx = { .dsi = ctx->dsi }; -usleep_range (5000 ,10000 ); - - ret =mipi_dsi_dcs_enter_sleep_mode (ctx->dsi); -if (ret <0 ) { -dev_err (dev,"Failed to enter sleep mode (%d)\n" , ret); -return ret; - } +mipi_dsi_dcs_set_display_off_multi (&dsi_ctx); +mipi_dsi_usleep_range (&dsi_ctx,5000 ,10000 ); +mipi_dsi_dcs_enter_sleep_mode_multi (&dsi_ctx); -return 0 ; +return dsi_ctx.accum_err; }static int ili9805_unprepare (struct drm_panel *panel)
Signature · 1 line
2.43.0
PATCH v4 2/3 drm/panel: ilitek-ili9805: Use dsi_multi in init
In reply to Michail TatasDrop the struct ili9805_instr and the init table and use init functions.
--- drivers/gpu/drm/panel/panel-ilitek-ili9805.c | 161 +++++++++---------- 1 file changed, 76 insertions(+), 85 deletions(-)
drivers/gpu/drm/panel/panel-ilitek-ili9805.c +76 -85
@@ -25,22 +25,8 @@#define ILI9805_SETEXTC_PARAMETER2 (0x98)#define ILI9805_SETEXTC_PARAMETER3 (0x05) -#define ILI9805_INSTR (_delay, ...) { \ - .delay = (_delay), \ - .len = sizeof((u8[]) {__VA_ARGS__}), \ - .data = (u8[]){__VA_ARGS__} \ - } - -struct ili9805_instr { -size_t len; -const u8 *data; -u32 delay; -}; -struct ili9805_desc { -const char *name; -const struct ili9805_instr *init; -const size_t init_length; +void (*init)(struct mipi_dsi_multi_context *ctx);const struct drm_display_mode *mode;u32 width_mm;u32 height_mm;
@@ -56,65 +42,80 @@ struct ili9805 {struct gpio_desc *reset_gpio; }; -static const struct ili9805_instr gpm1780a0_init[] = { -ILI9805_INSTR (100 ,ILI9805_EXTCMD_CMD_SET_ENABLE_REG ,ILI9805_SETEXTC_PARAMETER1 , -ILI9805_SETEXTC_PARAMETER2 ,ILI9805_SETEXTC_PARAMETER3 ), -ILI9805_INSTR (100 ,0xFD ,0x0F ,0x10 ,0x44 ,0x00 ), -ILI9805_INSTR (0 ,0xf8 ,0x18 ,0x02 ,0x02 ,0x18 ,0x02 ,0x02 ,0x30 ,0x00 , -0x00 ,0x30 ,0x00 ,0x00 ,0x30 ,0x00 ,0x00 ), -ILI9805_INSTR (0 ,0xB8 ,0x62 ), -ILI9805_INSTR (0 ,0xF1 ,0x00 ), -ILI9805_INSTR (0 ,0xF2 ,0x00 ,0x58 ,0x40 ), -ILI9805_INSTR (0 ,0xF3 ,0x60 ,0x83 ,0x04 ), -ILI9805_INSTR (0 ,0xFC ,0x04 ,0x0F ,0x01 ), -ILI9805_INSTR (0 ,0xEB ,0x08 ,0x0F ), -ILI9805_INSTR (0 ,0xe0 ,0x00 ,0x08 ,0x0d ,0x0e ,0x0e ,0x0d ,0x0a ,0x08 ,0x04 , -0x08 ,0x0d ,0x0f ,0x0b ,0x1c ,0x14 ,0x0a ), -ILI9805_INSTR (0 ,0xe1 ,0x00 ,0x08 ,0x0d ,0x0e ,0x0e ,0x0d ,0x0a ,0x08 ,0x04 , -0x08 ,0x0d ,0x0f ,0x0b ,0x1c ,0x14 ,0x0a ), -ILI9805_INSTR (10 ,0xc1 ,0x13 ,0x39 ,0x19 ,0x06 ), -ILI9805_INSTR (10 ,0xc7 ,0xe5 ), -ILI9805_INSTR (10 ,0xB1 ,0x00 ,0x12 ,0x14 ), -ILI9805_INSTR (10 ,0xB4 ,0x02 ), -ILI9805_INSTR (0 ,0xBB ,0x14 ,0x55 ), -ILI9805_INSTR (0 ,MIPI_DCS_SET_ADDRESS_MODE ,0x08 ), -ILI9805_INSTR (0 ,MIPI_DCS_SET_PIXEL_FORMAT ,0x77 ), -ILI9805_INSTR (0 ,0x20 ), -ILI9805_INSTR (0 ,0xB0 ,0x01 ), -ILI9805_INSTR (0 ,0xB6 ,0x31 ,0x00 ,0xef ), -ILI9805_INSTR (0 ,0xDF ,0x23 ), -ILI9805_INSTR (0 ,0xB9 ,0x02 ,0x00 ), -}; +static void gpm1780a0_init (struct mipi_dsi_multi_context *ctx) +{ +mipi_dsi_dcs_write_seq_multi (ctx,ILI9805_EXTCMD_CMD_SET_ENABLE_REG , +ILI9805_SETEXTC_PARAMETER1 ,ILI9805_SETEXTC_PARAMETER2 , +ILI9805_SETEXTC_PARAMETER3 ); +mipi_dsi_msleep (ctx,100 ); +mipi_dsi_dcs_write_seq_multi (ctx,0xfd ,0x0f ,0x10 ,0x44 ,0x00 ); +mipi_dsi_msleep (ctx,100 ); +mipi_dsi_dcs_write_seq_multi (ctx,0xf8 ,0x18 ,0x02 ,0x02 ,0x18 ,0x02 ,0x02 ,0x30 ,0x00 , +0x00 ,0x30 ,0x00 ,0x00 ,0x30 ,0x00 ,0x00 ); +mipi_dsi_dcs_write_seq_multi (ctx,0xb8 ,0x62 ); +mipi_dsi_dcs_write_seq_multi (ctx,0xf1 ,0x00 ); +mipi_dsi_dcs_write_seq_multi (ctx,0xf2 ,0x00 ,0x58 ,0x40 ); +mipi_dsi_dcs_write_seq_multi (ctx,0xf3 ,0x60 ,0x83 ,0x04 ); +mipi_dsi_dcs_write_seq_multi (ctx,0xfc ,0x04 ,0x0f ,0x01 ); +mipi_dsi_dcs_write_seq_multi (ctx,0xeb ,0x08 ,0x0f ); +mipi_dsi_dcs_write_seq_multi (ctx,0xe0 ,0x00 ,0x08 ,0x0d ,0x0e ,0x0e ,0x0d ,0x0a ,0x08 , +0x04 ,0x08 ,0x0d ,0x0f ,0x0b ,0x1c ,0x14 ,0x0a ); +mipi_dsi_dcs_write_seq_multi (ctx,0xe1 ,0x00 ,0x08 ,0x0d ,0x0e ,0x0e ,0x0d ,0x0a ,0x08 , +0x04 ,0x08 ,0x0d ,0x0f ,0x0b ,0x1c ,0x14 ,0x0a ); +mipi_dsi_dcs_write_seq_multi (ctx,0xc1 ,0x13 ,0x39 ,0x19 ,0x06 ); +mipi_dsi_msleep (ctx,10 ); +mipi_dsi_dcs_write_seq_multi (ctx,0xc7 ,0xe5 ); +mipi_dsi_msleep (ctx,10 ); +mipi_dsi_dcs_write_seq_multi (ctx,0xb1 ,0x00 ,0x12 ,0x14 ); +mipi_dsi_msleep (ctx,10 ); +mipi_dsi_dcs_write_seq_multi (ctx,0xb4 ,0x02 ); +mipi_dsi_msleep (ctx,10 ); +mipi_dsi_dcs_write_seq_multi (ctx,0xbb ,0x14 ,0x55 ); +mipi_dsi_dcs_write_seq_multi (ctx,MIPI_DCS_SET_ADDRESS_MODE ,0x08 ); +mipi_dsi_dcs_set_pixel_format_multi (ctx,0x77 ); +mipi_dsi_dcs_write_seq_multi (ctx,0x20 ); +mipi_dsi_dcs_write_seq_multi (ctx,0xb0 ,0x01 ); +mipi_dsi_dcs_write_seq_multi (ctx,0xb6 ,0x31 ,0x00 ,0xef ); +mipi_dsi_dcs_write_seq_multi (ctx,0xdf ,0x23 ); +mipi_dsi_dcs_write_seq_multi (ctx,0xb9 ,0x02 ,0x00 ); +} -static const struct ili9805_instr tm041xdhg01_init[] = { -ILI9805_INSTR (100 ,ILI9805_EXTCMD_CMD_SET_ENABLE_REG ,ILI9805_SETEXTC_PARAMETER1 , -ILI9805_SETEXTC_PARAMETER2 ,ILI9805_SETEXTC_PARAMETER3 ), -ILI9805_INSTR (100 ,0xFD ,0x0F ,0x13 ,0x44 ,0x00 ), -ILI9805_INSTR (0 ,0xf8 ,0x18 ,0x02 ,0x02 ,0x18 ,0x02 ,0x02 ,0x30 ,0x01 , -0x01 ,0x30 ,0x01 ,0x01 ,0x30 ,0x01 ,0x01 ), -ILI9805_INSTR (0 ,0xB8 ,0x74 ), -ILI9805_INSTR (0 ,0xF1 ,0x00 ), -ILI9805_INSTR (0 ,0xF2 ,0x00 ,0x58 ,0x40 ), -ILI9805_INSTR (0 ,0xFC ,0x04 ,0x0F ,0x01 ), -ILI9805_INSTR (0 ,0xEB ,0x08 ,0x0F ), -ILI9805_INSTR (0 ,0xe0 ,0x01 ,0x0d ,0x15 ,0x0e ,0x0f ,0x0f ,0x0b ,0x08 ,0x04 , -0x07 ,0x0a ,0x0d ,0x0c ,0x15 ,0x0f ,0x08 ), -ILI9805_INSTR (0 ,0xe1 ,0x01 ,0x0d ,0x15 ,0x0e ,0x0f ,0x0f ,0x0b ,0x08 ,0x04 , -0x07 ,0x0a ,0x0d ,0x0c ,0x15 ,0x0f ,0x08 ), -ILI9805_INSTR (10 ,0xc1 ,0x15 ,0x03 ,0x03 ,0x31 ), -ILI9805_INSTR (10 ,0xB1 ,0x00 ,0x12 ,0x14 ), -ILI9805_INSTR (10 ,0xB4 ,0x02 ), -ILI9805_INSTR (0 ,0xBB ,0x14 ,0x55 ), -ILI9805_INSTR (0 ,MIPI_DCS_SET_ADDRESS_MODE ,0x0a ), -ILI9805_INSTR (0 ,MIPI_DCS_SET_PIXEL_FORMAT ,0x77 ), -ILI9805_INSTR (0 ,0x20 ), -ILI9805_INSTR (0 ,0xB0 ,0x00 ), -ILI9805_INSTR (0 ,0xB6 ,0x01 ), -ILI9805_INSTR (0 ,0xc2 ,0x11 ), -ILI9805_INSTR (0 ,0x51 ,0xFF ), -ILI9805_INSTR (0 ,0x53 ,0x24 ), -ILI9805_INSTR (0 ,0x55 ,0x00 ), -}; +static void tm041xdhg01_init (struct mipi_dsi_multi_context *ctx) +{ +mipi_dsi_dcs_write_seq_multi (ctx,ILI9805_EXTCMD_CMD_SET_ENABLE_REG , +ILI9805_SETEXTC_PARAMETER1 ,ILI9805_SETEXTC_PARAMETER2 , +ILI9805_SETEXTC_PARAMETER3 ); +mipi_dsi_msleep (ctx,100 ); +mipi_dsi_dcs_write_seq_multi (ctx,0xfd ,0x0f ,0x13 ,0x44 ,0x00 ); +mipi_dsi_msleep (ctx,100 ); +mipi_dsi_dcs_write_seq_multi (ctx,0xf8 ,0x18 ,0x02 ,0x02 ,0x18 ,0x02 ,0x02 ,0x30 ,0x01 , +0x01 ,0x30 ,0x01 ,0x01 ,0x30 ,0x01 ,0x01 ); +mipi_dsi_dcs_write_seq_multi (ctx,0xb8 ,0x74 ); +mipi_dsi_dcs_write_seq_multi (ctx,0xf1 ,0x00 ); +mipi_dsi_dcs_write_seq_multi (ctx,0xf2 ,0x00 ,0x58 ,0x40 ); +mipi_dsi_dcs_write_seq_multi (ctx,0xfc ,0x04 ,0x0f ,0x01 ); +mipi_dsi_dcs_write_seq_multi (ctx,0xeb ,0x08 ,0x0f ); +mipi_dsi_dcs_write_seq_multi (ctx,0xe0 ,0x01 ,0x0d ,0x15 ,0x0e ,0x0f ,0x0f ,0x0b ,0x08 , +0x04 ,0x07 ,0x0a ,0x0d ,0x0c ,0x15 ,0x0f ,0x08 ); +mipi_dsi_dcs_write_seq_multi (ctx,0xe1 ,0x01 ,0x0d ,0x15 ,0x0e ,0x0f ,0x0f ,0x0b ,0x08 , +0x04 ,0x07 ,0x0a ,0x0d ,0x0c ,0x15 ,0x0f ,0x08 ); +mipi_dsi_dcs_write_seq_multi (ctx,0xc1 ,0x15 ,0x03 ,0x03 ,0x31 ); +mipi_dsi_msleep (ctx,10 ); +mipi_dsi_dcs_write_seq_multi (ctx,0xb1 ,0x00 ,0x12 ,0x14 ); +mipi_dsi_msleep (ctx,10 ); +mipi_dsi_dcs_write_seq_multi (ctx,0xb4 ,0x02 ); +mipi_dsi_msleep (ctx,10 ); +mipi_dsi_dcs_write_seq_multi (ctx,0xbb ,0x14 ,0x55 ); +mipi_dsi_dcs_write_seq_multi (ctx,MIPI_DCS_SET_ADDRESS_MODE ,0x0a ); +mipi_dsi_dcs_set_pixel_format_multi (ctx,0x77 ); +mipi_dsi_dcs_write_seq_multi (ctx,0x20 ); +mipi_dsi_dcs_write_seq_multi (ctx,0xb0 ,0x00 ); +mipi_dsi_dcs_write_seq_multi (ctx,0xb6 ,0x01 ); +mipi_dsi_dcs_write_seq_multi (ctx,0xc2 ,0x11 ); +mipi_dsi_dcs_write_seq_multi (ctx,0x51 ,0xff ); +mipi_dsi_dcs_write_seq_multi (ctx,0x53 ,0x24 ); +mipi_dsi_dcs_write_seq_multi (ctx,0x55 ,0x00 ); +}static inline struct ili9805 *panel_to_ili9805 (struct drm_panel *panel) {
@@ -160,16 +161,8 @@ static int ili9805_power_off(struct ili9805 *ctx)static int ili9805_activate (struct ili9805 *ctx) {struct mipi_dsi_multi_context dsi_ctx = { .dsi = ctx->dsi }; -int i; -for (i =0 ; i < ctx->desc->init_length; i++) { -const struct ili9805_instr *instr = &ctx->desc->init[i]; - -mipi_dsi_dcs_write_buffer_multi (&dsi_ctx, instr->data, instr->len); - -if (instr->delay >0 ) -mipi_dsi_msleep (&dsi_ctx, instr->delay); - } + ctx->desc->init (&dsi_ctx);mipi_dsi_dcs_exit_sleep_mode_multi (&dsi_ctx);mipi_dsi_usleep_range (&dsi_ctx,5000 ,6000 );
@@ -246,7 +239,7 @@ static const struct drm_display_mode tm041xdhg01_timing = { };static int ili9805_get_modes (struct drm_panel *panel, -struct drm_connector *connector) +struct drm_connector *connector) {struct ili9805 *ctx =panel_to_ili9805 (panel);struct drm_display_mode *mode;
@@ -343,7 +336,6 @@ static void ili9805_dsi_remove(struct mipi_dsi_device *dsi)static const struct ili9805_desc gpm1780a0_desc = { .init = gpm1780a0_init, - .init_length =ARRAY_SIZE (gpm1780a0_init), .mode = &gpm1780a0_timing, .width_mm =65 , .height_mm =65 ,
@@ -351,7 +343,6 @@ static const struct ili9805_desc gpm1780a0_desc = {static const struct ili9805_desc tm041xdhg01_desc = { .init = tm041xdhg01_init, - .init_length =ARRAY_SIZE (tm041xdhg01_init), .mode = &tm041xdhg01_timing, .width_mm =42 , .height_mm =96 ,
Signature · 1 line
2.43.0
PATCH v4 3/3 drm/panel: ilitek-ili9805: make cleanup funcs void
In reply to Michail TatasMake cleanup functions return void since no one is checking their return values
--- drivers/gpu/drm/panel/panel-ilitek-ili9805.c | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-)
drivers/gpu/drm/panel/panel-ilitek-ili9805.c +2 -6
@@ -149,13 +149,11 @@ static int ili9805_power_on(struct ili9805 *ctx)return 0 ; } -static int ili9805_power_off (struct ili9805 *ctx) +static void ili9805_power_off (struct ili9805 *ctx) {gpiod_set_value (ctx->reset_gpio,0 );regulator_disable (ctx->dvdd);regulator_disable (ctx->avdd); - -return 0 ; }static int ili9805_activate (struct ili9805 *ctx)
@@ -189,15 +187,13 @@ static int ili9805_prepare(struct drm_panel *panel)return 0 ; } -static int ili9805_deactivate (struct ili9805 *ctx) +static void ili9805_deactivate (struct ili9805 *ctx) {struct mipi_dsi_multi_context dsi_ctx = { .dsi = ctx->dsi };mipi_dsi_dcs_set_display_off_multi (&dsi_ctx);mipi_dsi_usleep_range (&dsi_ctx,5000 ,10000 );mipi_dsi_dcs_enter_sleep_mode_multi (&dsi_ctx); - -return dsi_ctx.accum_err; }static int ili9805_unprepare (struct drm_panel *panel)
Signature · 1 line
2.43.0
Hi,
Quoted 14 lines · Michail Tatas
This series converts panel-ilitek-ili9805 to the mipi_dsi_*_multi helpers and cleans up the resulting code.
Patch 1: Convert the individual DSI calls to their
*_multivariantsPatch 2: Replace the
ILI9805_INSTRtable with per panel init functions using the*_multiAPI, dropping structili9805_instrPatch 3: makes
ili9805_power_off()andili9805_deactivate()return void, since no one checks their return values.
Quoted 7 lines
Michail Tatas (3):
drm/panel: ilitek-ili9805: Use_multivariants drm/panel: ilitek-ili9805: Usedsi_multiin init drm/panel: ilitek-ili9805: make cleanup funcs voiddrivers/gpu/drm/panel/panel-ilitek-ili9805.c | 212 ++++++++----------- 1 file changed, 87 insertions(+), 125 deletions(-)
Thanks for the extra small cleanups. Planning to apply v4 mid-next week unless something comes up.
-Doug
Hi,
Quoted 23 lines · Doug Anderson
Hi,
Quoted 19 lines · Michail Tatas
This series converts panel-ilitek-ili9805 to the mipi_dsi_*_multi helpers and cleans up the resulting code.
Patch 1: Convert the individual DSI calls to their
*_multivariantsPatch 2: Replace the
ILI9805_INSTRtable with per panel init functions using the*_multiAPI, dropping structili9805_instrPatch 3: makes
ili9805_power_off()andili9805_deactivate()return void, since no one checks their return values.Michail Tatas (3):
drm/panel: ilitek-ili9805: Use_multivariants drm/panel: ilitek-ili9805: Usedsi_multiin init drm/panel: ilitek-ili9805: make cleanup funcs void
Quoted 5 lines
Quoted 2 lines
drivers/gpu/drm/panel/panel-ilitek-ili9805.c | 212 ++++++++----------- 1 file changed, 87 insertions(+), 125 deletions(-)Thanks for the extra small cleanups. Planning to apply v4 mid-next week unless something comes up.
Pushed v4 to drm-misc-next:
[1/3] drm/panel: ilitek-ili9805: Use _multi variants
commit: fdde70f52306f74c7f2466706626f3f1ef973e61
[2/3] drm/panel: ilitek-ili9805: Use dsi_multi in init
commit: 438caed529a6b6dd985afc85ee52a29bc20ab3f6
[3/3] drm/panel: ilitek-ili9805: make cleanup funcs void
commit: eb7979f6014a18f7086ecbb70da3e442056b5673