media: qcom: iris: move OPP handling to VPU power transaction
Subsystems (4)
PATCH v6 1/1 media: qcom: iris: move OPP handling to VPU power transaction
The power-domain helpers currently update the OPP for core->dev while enabling or disabling one functional power domain. This makes a transaction-wide performance state depend on a low-level helper and can leave the maximum OPP selected when a later power-domain resume fails.
Move the maximum OPP request to iris_vpu_power_on(), after the ICC vote and before powering on the controller and hardware. Unwind the OPP vote together with the ICC vote on failures.
Keep the power-domain helpers limited to runtime PM and use pm_runtime_resume_and_get() so a failed resume does not leave the usage counter incremented.
---
Changes in v6:
- Move OPP handling from the power-domain helpers to iris_vpu_power_on().
- Request the maximum OPP before powering on the controller and hardware.
- Add OPP cleanup to the VPU power-on error path.
- Keep the power-domain helpers limited to runtime PM operations.
- Replace pm_runtime_get_sync() with pm_runtime_resume_and_get().
- Rename the patch to reflect the new approach.
Changes in v5:
- Add an error path to roll back the OPP vote when pm_runtime_resume_and_get() fails.
.../media/platform/qcom/iris/iris_resources.c | 16 +--------------- .../media/platform/qcom/iris/iris_vpu_common.c | 8 +++++++- 2 files changed, 8 insertions(+), 16 deletions(-)
drivers/media/platform/qcom/iris/iris_resources.c +1 -15
@@ -104,39 +104,25 @@ int iris_enable_power_domains(struct iris_core *core, enum platform_pm_domain_ty {int pd_index =iris_get_pd_index_by_type (core, pd_type);struct device *pd_dev; -int ret;if (pd_index <0 )return pd_index; pd_dev = core->pmdomain_tbl->pd_devs[pd_index]; - ret =iris_opp_set_rate (core->dev,ULONG_MAX ); -if (ret) -return ret; - - ret =pm_runtime_get_sync (pd_dev); -if (ret <0 ) -return ret; - -return ret; +return pm_runtime_resume_and_get (pd_dev); }int iris_disable_power_domains (struct iris_core *core,enum platform_pm_domain_type pd_type) {int pd_index =iris_get_pd_index_by_type (core, pd_type);struct device *pd_dev; -int ret;if (pd_index <0 )return pd_index; pd_dev = core->pmdomain_tbl->pd_devs[pd_index]; - ret =iris_opp_set_rate (core->dev,0 ); -if (ret) -return ret; -pm_runtime_put_sync (pd_dev);return 0 ;
drivers/media/platform/qcom/iris/iris_vpu_common.c +7 -1
@@ -472,10 +472,14 @@ int iris_vpu_power_on(struct iris_core *core)if (ret) goto err; - ret = core->iris_platform_data->vpu_ops->power_on_controller (core); + ret =iris_opp_set_rate (core->dev,ULONG_MAX );if (ret) goto err_unvote_icc; + ret = core->iris_platform_data->vpu_ops->power_on_controller (core); +if (ret) + goto err_opp; + ret = core->iris_platform_data->vpu_ops->power_on_hw (core);if (ret) goto err_power_off_ctrl;
@@ -495,6 +499,8 @@ int iris_vpu_power_on(struct iris_core *core) err_power_off_ctrl: core->iris_platform_data->vpu_ops->power_off_controller (core); +err_opp: +iris_opp_set_rate (core->dev,0 ); err_unvote_icc:iris_unset_icc_bw (core); err:
Signature · 1 line
2.43.0
Quoted 36 lines · Hungyu Lin
The power-domain helpers currently update the OPP for
core->devwhile enabling or disabling one functional power domain. This makes a transaction-wide performance state depend on a low-level helper and can leave the maximum OPP selected when a later power-domain resume fails.Move the maximum OPP request to
iris_vpu_power_on(), after the ICC vote and before powering on the controller and hardware. Unwind the OPP vote together with the ICC vote on failures.Keep the power-domain helpers limited to runtime PM and use
pm_runtime_resume_and_get()so a failed resume does not leave the usage counter incremented.Fixes bb8a95aa038e ("media: iris: implement power management")Signed-off-by Hungyu Lin <[email protected]>---
drivers/media/platform/qcom/iris/iris_vpu_common.c +5
-1@@ -472,10 +472,14 @@ int iris_vpu_power_on(struct iris_core *core)if (ret) goto err; - ret = core->iris_platform_data->vpu_ops->power_on_controller (core); + ret =iris_opp_set_rate (core->dev,ULONG_MAX );if (ret) goto err_unvote_icc; + ret = core->iris_platform_data->vpu_ops->power_on_controller (core); +if (ret) + goto err_opp; + ret = core->iris_platform_data->vpu_ops->power_on_hw (core);if (ret) goto err_power_off_ctrl;
drivers/media/platform/qcom/iris/iris_vpu_common.c int iris_vpu_power_on(struct iris_core *core) · line 503
Quoted 5 lines
drivers/media/platform/qcom/iris/iris_vpu_common.c +2
-0@@ -495,6 +499,8 @@ int iris_vpu_power_on(struct iris_core *core) err_power_off_ctrl: core->iris_platform_data->vpu_ops->power_off_controller (core); +err_opp: +iris_opp_set_rate (core->dev,0 );
iris_opp_set_rate(0) will almost never do what you want - it will set the rate to something lower, but not disable the clocks or drop the power vote. Dropping the vote will happen as the device (runtime) suspends.
This is an existing "issue" in the driver
Konrad
Quoted 1 line
This is an existing "issue" in the driver
Thanks for the review.
I understand that iris_opp_set_rate(0) only selects the lowest OPP and does not actually drop the performance-state vote, which is handled when the device runtime-suspends.
I will keep the OPP ownership change in iris_vpu_power_on() separate from this existing behavior. Would you prefer the actual OPP release to be addressed in a separate follow-up patch?
Thanks,
Hungyu Lin