arm64: dts: qcom: Refine device support for Xiaomi Redmi 5A
v4 cover arm64: dts: qcom: Refine device support for Xiaomi Redmi 5A
Changes in v4:
- Simplify commit title
- Add commit description
- Drop redundant status propery in LED node
Changes in v3:
- Add vcc-supply for vibrator
Changes in v2:
- Split the patch into multiple patches.
- Change name in Signed-off-by field.
v3: https://lore.kernel.org/r/[email protected]
v2: https://lore.kernel.org/r/[email protected]
v1: https://lore.kernel.org/r/[email protected]
Reza Kurniawan (3):
arm64: dts: qcom: msm8917-xiaomi-riva: Enable debug UART console
arm64: dts: qcom: msm8917-xiaomi-riva: Add GPIO haptic vibrator
arm64: dts: qcom: msm8917-xiaomi-riva: Add notification LED support
.../boot/dts/qcom/msm8917-xiaomi-riva.dts | 35 +++++++++++++++++++ 1 file changed, 35 insertions(+)
base-commit: 6a746cd265aed59107ebdaa9ce039bb832922969
Signature · 1 line
2.55.0
PATCH v4 1/3 arm64: dts: qcom: msm8917-xiaomi-riva: Enable debug UART console
Xiaomi Redmi 5A has accessible UART test points on its PCB, they are routed to the BLSP1 UART2 port.
Enable the blsp1_uart2 node and configure stdout-path under the chosen node to allow outputting kernel logs and facilitate early debugging.
---
v4:
- Simplify commit title
- Add commit description
arch/arm64/boot/dts/qcom/msm8917-xiaomi-riva.dts | 8 ++++++++ 1 file changed, 8 insertions(+)
arch/arm64/boot/dts/qcom/msm8917-xiaomi-riva.dts +8 -0
@@ -13,6 +13,10 @@ / { qcom,board-id = <0x1000b 1>, <0x1000b 2>; + chosen { + stdout-path = &blsp1_uart2; + }; + battery: battery { compatible = "simple-battery"; charge-full-design-microamp-hours = <3000000>;
@@ -25,6 +29,10 @@ battery: battery { }; }; +&blsp1_uart2 { + status = "okay"; +}; + &blsp2_i2c1 { status = "okay";
Signature · 1 line
2.55.0
Re: [PATCH v4 1/3] arm64: dts: qcom: msm8917-xiaomi-riva: Enable debug UART console
Quoted 8 lines · Reza Kurniawan
Xiaomi Redmi 5A has accessible UART test points on its PCB, they are routed to the BLSP1 UART2 port.
Enable the
blsp1_uart2node and configure stdout-path under the chosen node to allow outputting kernel logs and facilitate early debugging.Signed-off-by Reza Kurniawan <[email protected]>---
Konrad
PATCH v4 2/3 arm64: dts: qcom: msm8917-xiaomi-riva: Add GPIO haptic vibrator
In reply to Reza KurniawanThe haptic vibrator in Xiaomi Redmi 5A is controlled through TLMM GPIO 97 and is directly powered vph_pwr.
Define the vibrator node using the "gpio-vibrator" driver.
---
v4:
- Simplify commit title
- Add commit description
v3:
- Add vcc-supply for vibrator
arch/arm64/boot/dts/qcom/msm8917-xiaomi-riva.dts | 6 ++++++ 1 file changed, 6 insertions(+)
arch/arm64/boot/dts/qcom/msm8917-xiaomi-riva.dts +6 -0
@@ -27,6 +27,12 @@ battery: battery { charge-term-current-microamp = <60000>; voltage-min-design-microvolt = <3400000>; }; + + vibrator { + compatible = "gpio-vibrator"; + enable-gpios = <&tlmm 97 GPIO_ACTIVE_HIGH>; + vcc-supply = <&vph_pwr>; + }; }; &blsp1_uart2 {
Signature · 1 line
2.55.0
Re: [PATCH v4 2/3] arm64: dts: qcom: msm8917-xiaomi-riva: Add GPIO haptic vibrator
Quoted 7 lines · Reza Kurniawan
The haptic vibrator in Xiaomi Redmi 5A is controlled through TLMM GPIO 97 and is directly powered
vph_pwr.Define the vibrator node using the "gpio-vibrator" driver.
Signed-off-by Reza Kurniawan <[email protected]>---
Konrad
PATCH v4 3/3 arm64: dts: qcom: msm8917-xiaomi-riva: Add notification LED support
In reply to Reza KurniawanAdd the aw2013 led-controller node for controlling the notification LED. Since it communicates through I2C, also enable the blsp1_i2c2 node.
---
v4:
- Simplify commit title
- Add commit description
- Drop redundant status propery in LED node
.../boot/dts/qcom/msm8917-xiaomi-riva.dts | 21 +++++++++++++++++++ 1 file changed, 21 insertions(+)
arch/arm64/boot/dts/qcom/msm8917-xiaomi-riva.dts +21 -0
@@ -5,6 +5,7 @@ /dts-v1/; +#include <dt-bindings/leds/common.h> #include "msm8917-xiaomi-wingtech.dtsi" / {
@@ -35,6 +36,26 @@ vibrator { }; }; +&blsp1_i2c2 { + status = "okay"; + + led-controller@45 { + compatible = "awinic,aw2013"; + reg = <0x45>; + vcc-supply = <&pm8937_l10>; + vio-supply = <&pm8937_l5>; + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + led-max-microamp = <5000>; + function = LED_FUNCTION_INDICATOR; + color = <LED_COLOR_ID_WHITE>; + }; + }; +}; + &blsp1_uart2 { status = "okay"; };
Signature · 1 line
2.55.0
Re: [PATCH v4 3/3] arm64: dts: qcom: msm8917-xiaomi-riva: Add notification LED support
Quoted 5 lines · Reza Kurniawan
Add the aw2013 led-controller node for controlling the notification LED. Since it communicates through I2C, also enable the
blsp1_i2c2node.Signed-off-by Reza Kurniawan <[email protected]>---
Konrad
Quoted 9 lines · Reza Kurniawan
Changes in v4:
- Simplify commit title
- Add commit description
- Drop redundant status propery in LED nodeChanges in v3:
- Add vcc-supply for vibrator[...]
Applied, thanks!
[1/3] arm64: dts: qcom: msm8917-xiaomi-riva: Enable debug UART console
commit: 205e698663f5ed1593fea5cef825adca8828b426
[2/3] arm64: dts: qcom: msm8917-xiaomi-riva: Add GPIO haptic vibrator
commit: 067e6289a46ec5dffe824f1f4331deec55f4c356
[3/3] arm64: dts: qcom: msm8917-xiaomi-riva: Add notification LED support
commit: e82b1285a11478ef00827b2249c31c2189fc6b99Best regards,
Signature · 1 line
Bjorn Andersson <[email protected]>