ARM: dts: armada-395-gp: drop unsupported SDHCI clock-frequency
Subsystems (2)
PATCH 1/1 ARM: dts: armada-395-gp: drop unsupported SDHCI clock-frequency
The SDHCI node carries a "clock-frequency" property, but the marvell,armada-380-sdhci binding does not define it and dtbs_check rejects the node as a result. No driver consumes it either: only a few other sdhci-pltfm based drivers (imx, mcf, iproc, arasan, dwcmshc, xenon) read that property, while sdhci-pxav3 derives the maximum clock from the io clock rate.
Remove the property.
--- arch/arm/boot/dts/marvell/armada-395-gp.dts | 1 - 1 file changed, 1 deletion(-)
arch/arm/boot/dts/marvell/armada-395-gp.dts +0 -1
@@ -59,7 +59,6 @@ sata@a8000 { /* CON18 */ mmc@d8000 { - clock-frequency = <200000000>; broken-cd; wp-inverted; bus-width = <8>;
Signature · 1 line
2.55.0
Gregory CLEMENT
maintainerQuoted 7 lines · Rosen Penev
The SDHCI node carries a "clock-frequency" property, but the marvell,armada-380-sdhci binding does not define it and
dtbs_checkrejects the node as a result. No driver consumes it either: only a few other sdhci-pltfm based drivers (imx, mcf, iproc, arasan, dwcmshc, xenon) read that property, while sdhci-pxav3 derives the maximum clock from the io clock rate.
Quoted 5 lines
Remove the property.
Fixes 356645123581 ("ARM: dts: mvebu: armada-395-gp: add support for the Armada 395 GP Board")Assisted-by opencode:big-pickleSigned-off-by Rosen Penev <[email protected]>
Applied on mvebu/dt
Thanks,
Gregory
Quoted 19 lines
--- arch/arm/boot/dts/marvell/armada-395-gp.dts | 1 - 1 file changed, 1 deletion(-)arch/arm/boot/dts/marvell/armada-395-gp.dts +0
-1@@ -59,7 +59,6 @@ sata@a8000 { /* CON18 */ mmc@d8000 { - clock-frequency = <200000000>; broken-cd; wp-inverted; bus-width = <8>;Signature · 1 line
2.55.0
Signature · 3 lines
Grégory CLEMENT, Bootlin Embedded Linux and Kernel engineering https://bootlin.com