Fix static analyser and compiler warnings in int3472
Sakari Ailus
maintainerv3 cover Fix static analyser and compiler warnings in int3472
Hi folks,
The two first patches address smatch and compiler warnings in int3472. The third patch clean up GPIO parsing in the int3472 driver.
since v2:
- Drop the __free(ACPI_FREE) change.
- Move ACPI_FREE() earlier in the function and save the object's integer value into a local variable.
- Fix return values -- 0 was returned by v2 in some cases where 1 was the right value.
Sakari Ailus (3):
platform/x86: int3472: Address Coccinelle warning on an error print platform/x86: int3472: Fix uninitialised variable warning platform/x86: int3472: Clean up GPIO parsing
drivers/platform/x86/intel/int3472/discrete.c | 51 +++++++++---------- drivers/platform/x86/intel/int3472/tps68470.c | 2 +- 2 files changed, 25 insertions(+), 28 deletions(-)
base-commit: 56c29fa3ee666197516a231e75aed789ae9c530d
Signature · 1 line
2.47.3
Sakari Ailus
maintainerPATCH v3 1/3 platform/x86: int3472: Address Coccinelle warning on an error print
Fix the following Coccinelle warning:
./tps68470.c:164:58-65: WARNING: Consider using %pe to print PTR_ERR()
by using %pe specifier for printing an error code.
--- drivers/platform/x86/intel/int3472/tps68470.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/platform/x86/intel/int3472/tps68470.c +1 -1
@@ -161,7 +161,7 @@ static int skl_int3472_tps68470_probe(struct i2c_client *client) regmap =devm_regmap_init_i2c (client, &tps68470_regmap_config);if (IS_ERR (regmap)) { -dev_err (&client->dev,"Failed to create regmap: %ld\n" ,PTR_ERR (regmap)); +dev_err (&client->dev,"Failed to create regmap: %pe\n" , regmap);return PTR_ERR (regmap); }
Signature · 1 line
2.47.3
Re: [PATCH v3 1/3] platform/x86: int3472: Address Coccinelle warning on an error print
Quoted 9 lines · Sakari Ailus
Fix the following Coccinelle warning:
./tps68470.c:164:58-65: WARNING: Consider using %pe to print
PTR_ERR()by using %pe specifier for printing an error code.
Signed-off-by Sakari Ailus <[email protected]>Reviewed-by Ilpo Järvinen <[email protected]>
Quoted 21 lines
--- drivers/platform/x86/intel/int3472/tps68470.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)drivers/platform/x86/intel/int3472/tps68470.c +1
-2@@ -161,7 +161,7 @@ static int skl_int3472_tps68470_probe(struct i2c_client *client) regmap =devm_regmap_init_i2c (client, &tps68470_regmap_config);if (IS_ERR (regmap)) { -dev_err (&client->dev,"Failed to create regmap: %ld\n" ,PTR_ERR (regmap)); +dev_err (&client->dev,"Failed to create regmap: %pe\n" , regmap);return PTR_ERR (regmap); } --2.47.3
Signature · 1 line
Ricardo Ribalda
Re: [PATCH v3 1/3] platform/x86: int3472: Address Coccinelle warning on an error print
In reply to Sakari AilusHi Sakari - thanks for the patches
Quoted 9 lines · Sakari Ailus
Fix the following Coccinelle warning:
./tps68470.c:164:58-65: WARNING: Consider using %pe to print
PTR_ERR()by using %pe specifier for printing an error code.
Signed-off-by Sakari Ailus <[email protected]>Reviewed-by Ilpo Järvinen <[email protected]>---
Quoted 16 lines
drivers/platform/x86/intel/int3472/tps68470.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)drivers/platform/x86/intel/int3472/tps68470.c +1
-1@@ -161,7 +161,7 @@ static int skl_int3472_tps68470_probe(struct i2c_client *client) regmap =devm_regmap_init_i2c (client, &tps68470_regmap_config);if (IS_ERR (regmap)) { -dev_err (&client->dev,"Failed to create regmap: %ld\n" ,PTR_ERR (regmap)); +dev_err (&client->dev,"Failed to create regmap: %pe\n" , regmap);return PTR_ERR (regmap); }
Sakari Ailus
maintainerPATCH v3 2/3 platform/x86: int3472: Fix uninitialised variable warning
In reply to Sakari AilusFix a smatch warning about uninitialised err_msg variable, by printing the error where it is handled.
--- drivers/platform/x86/intel/int3472/discrete.c | 25 +++++++++++-------- 1 file changed, 14 insertions(+), 11 deletions(-)
drivers/platform/x86/intel/int3472/discrete.c +14 -11
@@ -329,7 +329,6 @@ static int skl_int3472_handle_gpio_resources(struct acpi_resource *ares,unsigned long gpio_flags;union acpi_object *obj;struct gpio_desc *gpio; -const char *err_msg;const char *con_id;int ret;
@@ -375,7 +374,8 @@ static int skl_int3472_handle_gpio_resources(struct acpi_resource *ares,case INT3472_GPIO_TYPE_HOTPLUG_DETECT : ret =skl_int3472_map_gpio_to_sensor (int3472, agpio, con_id, gpio_flags);if (ret) - err_msg ="Failed to map GPIO pin to sensor\n" ; +dev_err_probe (int3472->dev, ret, +"Failed to map GPIO pin to sensor\n" );break ;case INT3472_GPIO_TYPE_CLK_ENABLE :
@@ -387,7 +387,7 @@ static int skl_int3472_handle_gpio_resources(struct acpi_resource *ares, gpio =skl_int3472_gpiod_get_from_temp_lookup (int3472, agpio, con_id, gpio_flags);if (IS_ERR (gpio)) { ret =PTR_ERR (gpio); - err_msg ="Failed to get GPIO\n" ; +dev_err_probe (int3472->dev, ret,"Failed to get GPIO\n" );break ; }
@@ -395,14 +395,16 @@ static int skl_int3472_handle_gpio_resources(struct acpi_resource *ares,case INT3472_GPIO_TYPE_CLK_ENABLE : ret =skl_int3472_register_gpio_clock (int3472, gpio);if (ret) - err_msg ="Failed to register clock\n" ; +dev_err_probe (int3472->dev, ret, +"Failed to register clock\n" );break ;case INT3472_GPIO_TYPE_PRIVACY_LED :case INT3472_GPIO_TYPE_STROBE : ret =skl_int3472_register_led (int3472, gpio, con_id);if (ret) - err_msg ="Failed to register LED\n" ; +dev_err_probe (int3472->dev, ret, +"Failed to register LED\n" );break ;case INT3472_GPIO_TYPE_POWER_ENABLE :
@@ -413,7 +415,8 @@ static int skl_int3472_handle_gpio_resources(struct acpi_resource *ares, ret =skl_int3472_register_regulator (int3472, gpio, enable_time_us, con_id, second_sensor);if (ret) - err_msg ="Failed to register regulator\n" ; +dev_err_probe (int3472->dev, ret, +"Failed to register regulator\n" );break ;default :/* Never reached */
@@ -436,11 +439,11 @@ static int skl_int3472_handle_gpio_resources(struct acpi_resource *ares, int3472->ngpios++;ACPI_FREE (obj); -if (ret <0 ) -return dev_err_probe (int3472->dev, ret, err_msg); - -/* Tell acpi_dev_get_resources() to not make a copy of the resource */ -return 1 ; +/* +* Either return an error or tell acpi_dev_get_resources() to not make a +* copy of the resource. +*/ +return ret <0 ? ret :1 ; }int int3472_discrete_parse_crs (struct int3472_discrete_device *int3472)
Signature · 1 line
2.47.3
Re: [PATCH v3 2/3] platform/x86: int3472: Fix uninitialised variable warning
nits:
It would be nice to have the error message that it is fixed in the commit message (also for 1/3)
Would you consider adding a Fixes? This patch fixes a compilation error (with the right kernel config)
Quoted 4 lines · Sakari Ailus
Fix a smatch warning about uninitialised
err_msgvariable, by printing the error where it is handled.
Quoted 86 lines
Signed-off-by Sakari Ailus <[email protected]>--- drivers/platform/x86/intel/int3472/discrete.c | 25 +++++++++++-------- 1 file changed, 14 insertions(+), 11 deletions(-)drivers/platform/x86/intel/int3472/discrete.c +14
-12@@ -329,7 +329,6 @@ static int skl_int3472_handle_gpio_resources(struct acpi_resource *ares,unsigned long gpio_flags;union acpi_object *obj;struct gpio_desc *gpio; -const char *err_msg;const char *con_id;int ret;@@ -375,7 +374,8 @@ static int skl_int3472_handle_gpio_resources(struct acpi_resource *ares,case INT3472_GPIO_TYPE_HOTPLUG_DETECT : ret =skl_int3472_map_gpio_to_sensor (int3472, agpio, con_id, gpio_flags);if (ret) - err_msg ="Failed to map GPIO pin to sensor\n" ; +dev_err_probe (int3472->dev, ret, +"Failed to map GPIO pin to sensor\n" );break ;case INT3472_GPIO_TYPE_CLK_ENABLE :@@ -387,7 +387,7 @@ static int skl_int3472_handle_gpio_resources(struct acpi_resource *ares, gpio =skl_int3472_gpiod_get_from_temp_lookup (int3472, agpio, con_id, gpio_flags);if (IS_ERR (gpio)) { ret =PTR_ERR (gpio); - err_msg ="Failed to get GPIO\n" ; +dev_err_probe (int3472->dev, ret,"Failed to get GPIO\n" );break ; }@@ -395,14 +395,16 @@ static int skl_int3472_handle_gpio_resources(struct acpi_resource *ares,case INT3472_GPIO_TYPE_CLK_ENABLE : ret =skl_int3472_register_gpio_clock (int3472, gpio);if (ret) - err_msg ="Failed to register clock\n" ; +dev_err_probe (int3472->dev, ret, +"Failed to register clock\n" );break ;case INT3472_GPIO_TYPE_PRIVACY_LED :case INT3472_GPIO_TYPE_STROBE : ret =skl_int3472_register_led (int3472, gpio, con_id);if (ret) - err_msg ="Failed to register LED\n" ; +dev_err_probe (int3472->dev, ret, +"Failed to register LED\n" );break ;case INT3472_GPIO_TYPE_POWER_ENABLE :@@ -413,7 +415,8 @@ static int skl_int3472_handle_gpio_resources(struct acpi_resource *ares, ret =skl_int3472_register_regulator (int3472, gpio, enable_time_us, con_id, second_sensor);if (ret) - err_msg ="Failed to register regulator\n" ; +dev_err_probe (int3472->dev, ret, +"Failed to register regulator\n" );break ;default :/* Never reached */ @@ -436,11 +439,11 @@ static int skl_int3472_handle_gpio_resources(struct acpi_resource *ares, int3472->ngpios++;ACPI_FREE (obj); -if (ret <0 ) -return dev_err_probe (int3472->dev, ret, err_msg); - -/* Tell acpi_dev_get_resources() to not make a copy of the resource */ -return 1 ; +/* +* Either return an error or tell acpi_dev_get_resources() to not make a +* copy of the resource. +*/ +return ret <0 ? ret :1 ; }int int3472_discrete_parse_crs (struct int3472_discrete_device *int3472) --2.47.3
Signature · 1 line
Ricardo Ribalda
Sakari Ailus
maintainerRe: [PATCH v3 2/3] platform/x86: int3472: Fix uninitialised variable warning
Hi Ricardo,
Thanks for the review.
Quoted 4 lines · Ricardo Ribalda Delgado
nits:
It would be nice to have the error message that it is fixed in the commit message (also for 1/3)
There's actually a compiler warning on this, too. I'll reword this being:
Fix a compiler warning about an uninitialised err_msg variable by printing the error where it is handled:
drivers/platform/x86/intel/int3472/discrete.c:440:24: warning: ‘err_msg’ may be used uninitialized [-Wmaybe-uninitialized]
440 | return dev_err_probe(int3472->dev, ret, err_msg);
Quoted 3 lines
Would you consider adding a Fixes? This patch fixes a compilation error (with the right kernel config)
It seems it's always been there but I think it's a false positive: the compiler probably just can't figure out err_msg is unused if ret is non-zero.
Signature · 3 lines
Regards, Sakari Ailus
Re: [PATCH v3 2/3] platform/x86: int3472: Fix uninitialised variable warning
In reply to Sakari AilusHi Sakari - thanks for the patch
Quoted 5 lines · Sakari Ailus
Fix a smatch warning about uninitialised
err_msgvariable, by printing the error where it is handled.Signed-off-by Sakari Ailus <[email protected]>---
Oops, wonder why I didn't spot the compiler warning.
Quoted 80 lines
drivers/platform/x86/intel/int3472/discrete.c | 25 +++++++++++-------- 1 file changed, 14 insertions(+), 11 deletions(-)drivers/platform/x86/intel/int3472/discrete.c +14
-11@@ -329,7 +329,6 @@ static int skl_int3472_handle_gpio_resources(struct acpi_resource *ares,unsigned long gpio_flags;union acpi_object *obj;struct gpio_desc *gpio; -const char *err_msg;const char *con_id;int ret;@@ -375,7 +374,8 @@ static int skl_int3472_handle_gpio_resources(struct acpi_resource *ares,case INT3472_GPIO_TYPE_HOTPLUG_DETECT : ret =skl_int3472_map_gpio_to_sensor (int3472, agpio, con_id, gpio_flags);if (ret) - err_msg ="Failed to map GPIO pin to sensor\n" ; +dev_err_probe (int3472->dev, ret, +"Failed to map GPIO pin to sensor\n" );break ;case INT3472_GPIO_TYPE_CLK_ENABLE :@@ -387,7 +387,7 @@ static int skl_int3472_handle_gpio_resources(struct acpi_resource *ares, gpio =skl_int3472_gpiod_get_from_temp_lookup (int3472, agpio, con_id, gpio_flags);if (IS_ERR (gpio)) { ret =PTR_ERR (gpio); - err_msg ="Failed to get GPIO\n" ; +dev_err_probe (int3472->dev, ret,"Failed to get GPIO\n" );break ; }@@ -395,14 +395,16 @@ static int skl_int3472_handle_gpio_resources(struct acpi_resource *ares,case INT3472_GPIO_TYPE_CLK_ENABLE : ret =skl_int3472_register_gpio_clock (int3472, gpio);if (ret) - err_msg ="Failed to register clock\n" ; +dev_err_probe (int3472->dev, ret, +"Failed to register clock\n" );break ;case INT3472_GPIO_TYPE_PRIVACY_LED :case INT3472_GPIO_TYPE_STROBE : ret =skl_int3472_register_led (int3472, gpio, con_id);if (ret) - err_msg ="Failed to register LED\n" ; +dev_err_probe (int3472->dev, ret, +"Failed to register LED\n" );break ;case INT3472_GPIO_TYPE_POWER_ENABLE :@@ -413,7 +415,8 @@ static int skl_int3472_handle_gpio_resources(struct acpi_resource *ares, ret =skl_int3472_register_regulator (int3472, gpio, enable_time_us, con_id, second_sensor);if (ret) - err_msg ="Failed to register regulator\n" ; +dev_err_probe (int3472->dev, ret, +"Failed to register regulator\n" );break ;default :/* Never reached */ @@ -436,11 +439,11 @@ static int skl_int3472_handle_gpio_resources(struct acpi_resource *ares, int3472->ngpios++;ACPI_FREE (obj); -if (ret <0 ) -return dev_err_probe (int3472->dev, ret, err_msg); - -/* Tell acpi_dev_get_resources() to not make a copy of the resource */ -return 1 ; +/* +* Either return an error or tell acpi_dev_get_resources() to not make a +* copy of the resource. +*/ +return ret <0 ? ret :1 ; }int int3472_discrete_parse_crs (struct int3472_discrete_device *int3472)
Sakari Ailus
maintainerPATCH v3 3/3 platform/x86: int3472: Clean up GPIO parsing
In reply to Sakari AilusIn skl_int3472_handle_gpio_resources(), only a single integer value from the ACPI object is used so release it early and avoid having to call ACPI_FREE() on it later on. This makes it possible to return an error where it happens, except when we're holding a reference to a GPIO. ngpios is also incremented earlier on but that does not introduce a functional change.
--- drivers/platform/x86/intel/int3472/discrete.c | 42 ++++++++----------- 1 file changed, 18 insertions(+), 24 deletions(-)
drivers/platform/x86/intel/int3472/discrete.c +18 -24
@@ -328,6 +328,7 @@ static int skl_int3472_handle_gpio_resources(struct acpi_resource *ares,u8 active_value, pin, type;unsigned long gpio_flags;union acpi_object *obj; +unsigned int obj_value;struct gpio_desc *gpio;const char *con_id;int ret;
@@ -343,24 +344,27 @@ static int skl_int3472_handle_gpio_resources(struct acpi_resource *ares, &int3472_gpio_guid,0x00 , int3472->ngpios +2 , NULL, ACPI_TYPE_INTEGER); -if (!obj) {dev_warn (int3472->dev,"No _DSM entry for GPIO pin %u\n" , agpio->pin_table[0 ]);return 1 ; } - type =FIELD_GET (INT3472_GPIO_DSM_TYPE , obj->integer.value); + obj_value = obj->integer.value; + +ACPI_FREE (obj); + + type =FIELD_GET (INT3472_GPIO_DSM_TYPE , obj_value);int3472_get_con_id_and_polarity (int3472, &type, &con_id, &gpio_flags, &enable_time_us); - pin =FIELD_GET (INT3472_GPIO_DSM_PIN , obj->integer.value); + pin =FIELD_GET (INT3472_GPIO_DSM_PIN , obj_value);/* Pin field is not really used under Windows and wraps around at 8 bits */ if (pin != (agpio->pin_table[0 ] &0xff ))dev_dbg (int3472->dev,FW_BUG "%s %s pin number mismatch _DSM %d resource %d\n" , con_id, agpio->resource_source.string_ptr, pin, agpio->pin_table[0 ]); - active_value =FIELD_GET (INT3472_GPIO_DSM_SENSOR_ON_VAL , obj->integer.value); + active_value =FIELD_GET (INT3472_GPIO_DSM_SENSOR_ON_VAL , obj_value);if (!active_value) gpio_flags ^=GPIO_ACTIVE_LOW ;
@@ -368,16 +372,18 @@ static int skl_int3472_handle_gpio_resources(struct acpi_resource *ares, agpio->resource_source.string_ptr, agpio->pin_table[0 ], str_high_low(gpio_flags == GPIO_ACTIVE_HIGH)); + int3472->ngpios++; +switch (type) {case INT3472_GPIO_TYPE_RESET :case INT3472_GPIO_TYPE_POWERDOWN :case INT3472_GPIO_TYPE_HOTPLUG_DETECT : ret =skl_int3472_map_gpio_to_sensor (int3472, agpio, con_id, gpio_flags);if (ret) -dev_err_probe (int3472->dev, ret, -"Failed to map GPIO pin to sensor\n" ); +return dev_err_probe (int3472->dev, ret, +"Failed to map GPIO pin to sensor\n" ); -break ; +return 1 ;case INT3472_GPIO_TYPE_CLK_ENABLE :case INT3472_GPIO_TYPE_PRIVACY_LED :case INT3472_GPIO_TYPE_STROBE :
@@ -385,11 +391,9 @@ static int skl_int3472_handle_gpio_resources(struct acpi_resource *ares,case INT3472_GPIO_TYPE_DOVDD :case INT3472_GPIO_TYPE_HANDSHAKE : gpio =skl_int3472_gpiod_get_from_temp_lookup (int3472, agpio, con_id, gpio_flags); -if (IS_ERR (gpio)) { - ret =PTR_ERR (gpio); -dev_err_probe (int3472->dev, ret,"Failed to get GPIO\n" ); -break ; - } +if (IS_ERR (gpio)) +return dev_err_probe (int3472->dev,PTR_ERR (gpio), +"Failed to get GPIO\n" );switch (type) {case INT3472_GPIO_TYPE_CLK_ENABLE :
@@ -427,23 +431,13 @@ static int skl_int3472_handle_gpio_resources(struct acpi_resource *ares,if (ret)gpiod_put (gpio); -break ; +return ret <0 ? ret :1 ;default :dev_warn (int3472->dev,"GPIO type 0x%02x unknown; the sensor may not work\n" , type); - ret =1 ; -break ; +return 1 ; } - - int3472->ngpios++; -ACPI_FREE (obj); - -/* -* Either return an error or tell acpi_dev_get_resources() to not make a -* copy of the resource. -*/ -return ret <0 ? ret :1 ; }int int3472_discrete_parse_crs (struct int3472_discrete_device *int3472)
Signature · 1 line
2.47.3
Re: [PATCH v3 3/3] platform/x86: int3472: Clean up GPIO parsing
Hi Sakari, thanks for the patch
Quoted 9 lines · Sakari Ailus
In
skl_int3472_handle_gpio_resources(), only a single integer value from the ACPI object is used so release it early and avoid having to callACPI_FREE()on it later on. This makes it possible to return an error where it happens, except when we're holding a reference to a GPIO. ngpios is also incremented earlier on but that does not introduce a functional change.Signed-off-by Sakari Ailus <[email protected]>---
Looks good to me:
Quoted 110 lines
drivers/platform/x86/intel/int3472/discrete.c | 42 ++++++++----------- 1 file changed, 18 insertions(+), 24 deletions(-)drivers/platform/x86/intel/int3472/discrete.c +18
-24@@ -328,6 +328,7 @@ static int skl_int3472_handle_gpio_resources(struct acpi_resource *ares,u8 active_value, pin, type;unsigned long gpio_flags;union acpi_object *obj; +unsigned int obj_value;struct gpio_desc *gpio;const char *con_id;int ret;@@ -343,24 +344,27 @@ static int skl_int3472_handle_gpio_resources(struct acpi_resource *ares, &int3472_gpio_guid,0x00 , int3472->ngpios +2 , NULL, ACPI_TYPE_INTEGER); -if (!obj) {dev_warn (int3472->dev,"No _DSM entry for GPIO pin %u\n" , agpio->pin_table[0 ]);return 1 ; } - type =FIELD_GET (INT3472_GPIO_DSM_TYPE , obj->integer.value); + obj_value = obj->integer.value; + +ACPI_FREE (obj); + + type =FIELD_GET (INT3472_GPIO_DSM_TYPE , obj_value);int3472_get_con_id_and_polarity (int3472, &type, &con_id, &gpio_flags, &enable_time_us); - pin =FIELD_GET (INT3472_GPIO_DSM_PIN , obj->integer.value); + pin =FIELD_GET (INT3472_GPIO_DSM_PIN , obj_value);/* Pin field is not really used under Windows and wraps around at 8 bits */ if (pin != (agpio->pin_table[0 ] &0xff ))dev_dbg (int3472->dev,FW_BUG "%s %s pin number mismatch _DSM %d resource %d\n" , con_id, agpio->resource_source.string_ptr, pin, agpio->pin_table[0 ]); - active_value =FIELD_GET (INT3472_GPIO_DSM_SENSOR_ON_VAL , obj->integer.value); + active_value =FIELD_GET (INT3472_GPIO_DSM_SENSOR_ON_VAL , obj_value);if (!active_value) gpio_flags ^=GPIO_ACTIVE_LOW ;@@ -368,16 +372,18 @@ static int skl_int3472_handle_gpio_resources(struct acpi_resource *ares, agpio->resource_source.string_ptr, agpio->pin_table[0 ], str_high_low(gpio_flags == GPIO_ACTIVE_HIGH)); + int3472->ngpios++; +switch (type) {case INT3472_GPIO_TYPE_RESET :case INT3472_GPIO_TYPE_POWERDOWN :case INT3472_GPIO_TYPE_HOTPLUG_DETECT : ret =skl_int3472_map_gpio_to_sensor (int3472, agpio, con_id, gpio_flags);if (ret) -dev_err_probe (int3472->dev, ret, -"Failed to map GPIO pin to sensor\n" ); +return dev_err_probe (int3472->dev, ret, +"Failed to map GPIO pin to sensor\n" ); -break ; +return 1 ;case INT3472_GPIO_TYPE_CLK_ENABLE :case INT3472_GPIO_TYPE_PRIVACY_LED :case INT3472_GPIO_TYPE_STROBE :@@ -385,11 +391,9 @@ static int skl_int3472_handle_gpio_resources(struct acpi_resource *ares,case INT3472_GPIO_TYPE_DOVDD :case INT3472_GPIO_TYPE_HANDSHAKE : gpio =skl_int3472_gpiod_get_from_temp_lookup (int3472, agpio, con_id, gpio_flags); -if (IS_ERR (gpio)) { - ret =PTR_ERR (gpio); -dev_err_probe (int3472->dev, ret,"Failed to get GPIO\n" ); -break ; - } +if (IS_ERR (gpio)) +return dev_err_probe (int3472->dev,PTR_ERR (gpio), +"Failed to get GPIO\n" );switch (type) {case INT3472_GPIO_TYPE_CLK_ENABLE :@@ -427,23 +431,13 @@ static int skl_int3472_handle_gpio_resources(struct acpi_resource *ares,if (ret)gpiod_put (gpio); -break ; +return ret <0 ? ret :1 ;default :dev_warn (int3472->dev,"GPIO type 0x%02x unknown; the sensor may not work\n" , type); - ret =1 ; -break ; +return 1 ; } - - int3472->ngpios++; -ACPI_FREE (obj); - -/* -* Either return an error or tell acpi_dev_get_resources() to not make a -* copy of the resource. -*/ -return ret <0 ? ret :1 ; }int int3472_discrete_parse_crs (struct int3472_discrete_device *int3472)
Quoted 21 lines · Sakari Ailus
Hi folks,
The two first patches address smatch and compiler warnings in int3472. The third patch clean up GPIO parsing in the int3472 driver.
since v2:
- Drop the
__free(ACPI_FREE)change.- Move
ACPI_FREE()earlier in the function and save the object's integer value into a local variable.- Fix return values -- 0 was returned by v2 in some cases where 1 was the right value.
Sakari Ailus (3):
platform/x86: int3472: Address Coccinelle warning on an error print platform/x86: int3472: Fix uninitialised variable warning platform/x86: int3472: Clean up GPIO parsing
Quoted 7 lines
drivers/platform/x86/intel/int3472/discrete.c | 51 +++++++++---------- drivers/platform/x86/intel/int3472/tps68470.c | 2 +- 2 files changed, 25 insertions(+), 28 deletions(-)base-commit:
56c29fa3ee666197516a231e75aed789ae9c530d--
for the series.
Thanks!