Bluetooth: btusb: Add support for Intel Otter Peak2 (OrP2)
PATCH 1/1 Bluetooth: btusb: Add support for Intel Otter Peak2 (OrP2)
From: "L, Catherine" <[email protected]>
$ lsusb Bus 003 Device 003: ID 8087:0043 Intel Corp.
$ cat /sys/kernel/debug/usb/devices T: Bus=03 Lev=01 Prnt=01 Port=09 Cnt=02 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 2.01 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=8087 ProdID=0043 Rev= 0.00 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
--- drivers/bluetooth/btusb.c | 2 ++ 1 file changed, 2 insertions(+)
drivers/bluetooth/btusb.c +2 -0
@@ -488,6 +488,8 @@ static const struct usb_device_id quirks_table[] = { { USB_DEVICE(0x8087, 0x0037), .driver_info = BTUSB_INTEL_COMBINED }, { USB_DEVICE(0x8087, 0x0038), .driver_info = BTUSB_INTEL_COMBINED }, { USB_DEVICE(0x8087, 0x0039), .driver_info = BTUSB_INTEL_COMBINED }, + /* Otter Peak2, Wildcat Lake */ + { USB_DEVICE(0x8087, 0x0043), .driver_info = BTUSB_INTEL_COMBINED }, { USB_DEVICE(0x8087, 0x0040), .driver_info = BTUSB_INTEL_COMBINED }, /* Lizard Peak 2 */ { USB_DEVICE(0x8087, 0x07da), .driver_info = BTUSB_CSR }, { USB_DEVICE(0x8087, 0x07dc), .driver_info = BTUSB_INTEL_COMBINED |
Signature · 1 line
2.43.0
Dear Catherine,
Thank you for your patch.
Am 02.09.26 um 18:04 schrieb Catherine L:
Quoted 1 line
From: "L, Catherine" <[email protected]>
Please use the format without comma: Catherine L.
Quoted 16 lines
$ lsusb Bus 003 Device 003: ID 8087:0043 Intel Corp.$ cat /sys/kernel/debug/usb/devices T: Bus=03 Lev=01 Prnt=01 Port=09 Cnt=02 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 2.01 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=8087 ProdID=0043 Rev= 0.00 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
Quoted 1 line
Signed-off-by L, Catherine <[email protected]>
Ditto.
Quoted 9 lines
--- drivers/bluetooth/btusb.c | 2 ++ 1 file changed, 2 insertions(+)drivers/bluetooth/btusb.c +0
-0
drivers/bluetooth/btusb.c static const struct usb_device_id quirks_table[] = { · line 492
Quoted 5 lines
drivers/bluetooth/btusb.c +2
-0@@ -488,6 +488,8 @@ static const struct usb_device_id quirks_table[] = { { USB_DEVICE(0x8087, 0x0037), .driver_info = BTUSB_INTEL_COMBINED }, { USB_DEVICE(0x8087, 0x0038), .driver_info = BTUSB_INTEL_COMBINED }, { USB_DEVICE(0x8087, 0x0039), .driver_info = BTUSB_INTEL_COMBINED }, + /* Otter Peak2, Wildcat Lake */ + { USB_DEVICE(0x8087, 0x0043), .driver_info = BTUSB_INTEL_COMBINED },
Please sort and put the comment on the same line as below.
drivers/bluetooth/btusb.c static const struct usb_device_id quirks_table[] = { · line 495
Quoted 3 lines
drivers/bluetooth/btusb.c +0
-0{ USB_DEVICE(0x8087, 0x0040), .driver_info = BTUSB_INTEL_COMBINED }, /* Lizard Peak 2 */ { USB_DEVICE(0x8087, 0x07da), .driver_info = BTUSB_CSR }, { USB_DEVICE(0x8087, 0x07dc), .driver_info = BTUSB_INTEL_COMBINED |
Kind regards,
Paul
Hi Paul,
Thanks for the comments.
-----Original Message-----
From: Paul Menzel <[email protected]>
Sent: 02 September 2026 16:37
To: L, Catherine <[email protected]>
Cc: [email protected]; [email protected]; [email protected]; [email protected]; K, Kiran <[email protected]>; [email protected]
Subject: Re: [PATCH v1] Bluetooth: btusb: Add support for Intel Otter Peak2 (OrP2)
Dear Catherine,
Thank you for your patch.
Am 02.09.26 um 18:04 schrieb Catherine L:
Quoted 1 line
From: "L, Catherine" <[email protected]>
Please use the format without comma: Catherine L.
Ack, Will change in v2 patch
Quoted 16 lines
$ lsusb Bus 003 Device 003: ID 8087:0043 Intel Corp.$ cat /sys/kernel/debug/usb/devices T: Bus=03 Lev=01 Prnt=01 Port=09 Cnt=02 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 2.01 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=8087 ProdID=0043 Rev= 0.00 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
Quoted 1 line
Signed-off-by L, Catherine <[email protected]>
Ditto.
Ack, Will change in v2 patch
Quoted 9 lines
--- drivers/bluetooth/btusb.c | 2 ++ 1 file changed, 2 insertions(+)drivers/bluetooth/btusb.c +0
-0
drivers/bluetooth/btusb.c static const struct usb_device_id quirks_table[] = { · line 493
Quoted 6 lines
drivers/bluetooth/btusb.c +2
-0@@ -488,6 +488,8 @@ static const struct usb_device_id quirks_table[] = { { USB_DEVICE(0x8087, 0x0037), .driver_info = BTUSB_INTEL_COMBINED }, { USB_DEVICE(0x8087, 0x0038), .driver_info = BTUSB_INTEL_COMBINED }, { USB_DEVICE(0x8087, 0x0039), .driver_info = BTUSB_INTEL_COMBINED }, + /* Otter Peak2, Wildcat Lake */ + { USB_DEVICE(0x8087, 0x0043), .driver_info = BTUSB_INTEL_COMBINED },
Please sort and put the comment on the same line as below. Ack, Will change in v2 patch
Quoted 3 lines
drivers/bluetooth/btusb.c +0
-0{ USB_DEVICE(0x8087, 0x0040), .driver_info = BTUSB_INTEL_COMBINED }, /* Lizard Peak 2 */ { USB_DEVICE(0x8087, 0x07da), .driver_info = BTUSB_CSR },{
USB_DEVICE(0x8087, 0x07dc), .driver_info =BTUSB_INTEL_COMBINED|
Kind regards,
Paul
Regards,
Catherine L
Luiz Augusto von Dentz
maintainerHi Paul,
Quoted 35 lines · Paul Menzel
Dear Catherine,
Thank you for your patch.
Am 02.09.26 um 18:04 schrieb Catherine L:
Quoted 1 line
From: "L, Catherine" <[email protected]>
Please use the format without comma: Catherine L.
Quoted 16 lines
$ lsusb Bus 003 Device 003: ID 8087:0043 Intel Corp.$ cat /sys/kernel/debug/usb/devices T: Bus=03 Lev=01 Prnt=01 Port=09 Cnt=02 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 2.01 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=8087 ProdID=0043 Rev= 0.00 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1msQuoted 1 line
Signed-off-by L, Catherine <[email protected]>Ditto.
Quoted 4 lines
--- drivers/bluetooth/btusb.c | 2 ++ 1 file changed, 2 insertions(+)
Quoted 12 lines
drivers/bluetooth/btusb.c static const struct usb_device_id quirks_table[] = { · line 492
Quoted 10 lines
drivers/bluetooth/btusb.c +2
-0@@ -488,6 +488,8 @@ static const struct usb_device_id quirks_table[] = { { USB_DEVICE(0x8087, 0x0037), .driver_info = BTUSB_INTEL_COMBINED }, { USB_DEVICE(0x8087, 0x0038), .driver_info = BTUSB_INTEL_COMBINED }, { USB_DEVICE(0x8087, 0x0039), .driver_info = BTUSB_INTEL_COMBINED }, + /* Otter Peak2, Wildcat Lake */ + { USB_DEVICE(0x8087, 0x0043), .driver_info = BTUSB_INTEL_COMBINED },Please sort and put the comment on the same line as below.
That's not a good idea, we still have the 80-column limit for the Bluetooth subsystem.
Quoted 8 lines
drivers/bluetooth/btusb.c static const struct usb_device_id quirks_table[] = { · line 495
Quoted 3 lines
drivers/bluetooth/btusb.c +0
-0{ USB_DEVICE(0x8087, 0x0040), .driver_info = BTUSB_INTEL_COMBINED }, /* Lizard Peak 2 */ { USB_DEVICE(0x8087, 0x07da), .driver_info = BTUSB_CSR }, { USB_DEVICE(0x8087, 0x07dc), .driver_info = BTUSB_INTEL_COMBINED |Kind regards,
Paul
Signature · 1 line
Luiz Augusto von Dentz
This is automated email and please do not reply to this email!
Dear submitter,
Thank you for submitting the patches to the linux bluetooth mailing list. This is a CI test results with your patch series:
PW Link:https://patchwork.kernel.org/project/bluetooth/list/?series=1156048
---Test result---
Test Summary:
CheckPatch PASS 0.74 seconds VerifyFixes PASS 0.14 seconds VerifySignedoff PASS 0.14 seconds GitLint PASS 0.34 seconds SubjectPrefix PASS 0.13 seconds BuildKernel PASS 27.58 seconds CheckAllWarning PASS 30.71 seconds CheckSparse PASS 29.16 seconds BuildKernel32 PASS 26.46 seconds CheckKernelLLVM SKIP 0.00 seconds TestRunnerSetup PASS 503.41 seconds IncrementalBuild PASS 26.24 seconds
Details
##############################
Test: CheckKernelLLVM - SKIP
Desc: Build kernel with LLVM + context analysis
Output:
Clang not found
https://github.com/bluez/bluetooth-next/pull/686
---
Regards,
Linux Bluetooth