Skip to contentSkip to conversation

Bluetooth: btusb: Add support for Intel Otter Peak2 (OrP2)

PATCH Superseded Catherine L 4 participants 5 messages Sep 2 Bluetooth drivers

v1 of 2 Superseded Latest is v2 →

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 Bluetooth: btusb: Add support for Intel Otter Peak2 (OrP2)

From: "L, Catherine" <[email protected]>

$ lsusb
Bus 003 Device 003: ID 8087:0043 Intel Corp.
$ cat /sys/kernel/debug/usb/devices
T:  Bus=03 Lev=01 Prnt=01 Port=09 Cnt=02 Dev#=  3 Spd=12   MxCh= 0
D:  Ver= 2.01 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=8087 ProdID=0043 Rev= 0.00
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=81(I) Atr=03(Int.) MxPS=  64 Ivl=1ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
---
 drivers/bluetooth/btusb.c | 2 ++
 1 file changed, 2 insertions(+)
drivers/bluetooth/btusb.c +2 -0
index 03039ceaa77d..a4fdf6549127 100644
@@ -488,6 +488,8 @@ static const struct usb_device_id quirks_table[] = {
 	{ USB_DEVICE(0x8087, 0x0037), .driver_info = BTUSB_INTEL_COMBINED },
 	{ USB_DEVICE(0x8087, 0x0038), .driver_info = BTUSB_INTEL_COMBINED },
 	{ USB_DEVICE(0x8087, 0x0039), .driver_info = BTUSB_INTEL_COMBINED },
+	/* Otter Peak2, Wildcat Lake */
+	{ USB_DEVICE(0x8087, 0x0043), .driver_info = BTUSB_INTEL_COMBINED },
 	{ USB_DEVICE(0x8087, 0x0040), .driver_info = BTUSB_INTEL_COMBINED }, /* Lizard Peak 2 */
 	{ USB_DEVICE(0x8087, 0x07da), .driver_info = BTUSB_CSR },
 	{ USB_DEVICE(0x8087, 0x07dc), .driver_info = BTUSB_INTEL_COMBINED |
Signature · 1 line
2.43.0
#1 lore raw

Dear Catherine,

Thank you for your patch.

Am 02.09.26 um 18:04 schrieb Catherine L:

Quoted 1 line

From: "L, Catherine" <[email protected]>

Please use the format without comma: Catherine L.

Quoted 16 lines
$ lsusb
Bus 003 Device 003: ID 8087:0043 Intel Corp.
$ cat /sys/kernel/debug/usb/devices
T:  Bus=03 Lev=01 Prnt=01 Port=09 Cnt=02 Dev#=  3 Spd=12   MxCh= 0
D:  Ver= 2.01 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=8087 ProdID=0043 Rev= 0.00
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=81(I) Atr=03(Int.) MxPS=  64 Ivl=1ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
Quoted 1 line

Ditto.

Quoted 9 lines
---
  drivers/bluetooth/btusb.c | 2 ++
  1 file changed, 2 insertions(+)
drivers/bluetooth/btusb.c +0 -0
index 03039ceaa77d..a4fdf6549127 100644

drivers/bluetooth/btusb.c static const struct usb_device_id quirks_table[] = { · line 492

Quoted 5 lines
drivers/bluetooth/btusb.c +2 -0
@@ -488,6 +488,8 @@ static const struct usb_device_id quirks_table[] = {
  	{ USB_DEVICE(0x8087, 0x0037), .driver_info = BTUSB_INTEL_COMBINED },
  	{ USB_DEVICE(0x8087, 0x0038), .driver_info = BTUSB_INTEL_COMBINED },
  	{ USB_DEVICE(0x8087, 0x0039), .driver_info = BTUSB_INTEL_COMBINED },
+	/* Otter Peak2, Wildcat Lake */
+	{ USB_DEVICE(0x8087, 0x0043), .driver_info = BTUSB_INTEL_COMBINED },

Please sort and put the comment on the same line as below.

drivers/bluetooth/btusb.c static const struct usb_device_id quirks_table[] = { · line 495

Quoted 3 lines
drivers/bluetooth/btusb.c +0 -0
  	{ USB_DEVICE(0x8087, 0x0040), .driver_info = BTUSB_INTEL_COMBINED }, /* Lizard Peak 2 */
  	{ USB_DEVICE(0x8087, 0x07da), .driver_info = BTUSB_CSR },
  	{ USB_DEVICE(0x8087, 0x07dc), .driver_info = BTUSB_INTEL_COMBINED |

Kind regards,

Paul

#2 lore raw

Hi Paul,
Thanks for the comments.

-----Original Message-----
From: Paul Menzel <[email protected]>
Sent: 02 September 2026 16:37
To: L, Catherine <[email protected]>
Cc: [email protected]; [email protected]; [email protected]; [email protected]; K, Kiran <[email protected]>; [email protected]
Subject: Re: [PATCH v1] Bluetooth: btusb: Add support for Intel Otter Peak2 (OrP2)

Dear Catherine,

Thank you for your patch.

Am 02.09.26 um 18:04 schrieb Catherine L:

Quoted 1 line

From: "L, Catherine" <[email protected]>

Please use the format without comma: Catherine L.
Ack, Will change in v2 patch

Quoted 16 lines
$ lsusb
Bus 003 Device 003: ID 8087:0043 Intel Corp.
$ cat /sys/kernel/debug/usb/devices
T:  Bus=03 Lev=01 Prnt=01 Port=09 Cnt=02 Dev#=  3 Spd=12   MxCh= 0
D:  Ver= 2.01 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=8087 ProdID=0043 Rev= 0.00
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=81(I) Atr=03(Int.) MxPS=  64 Ivl=1ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
Quoted 1 line

Ditto.
Ack, Will change in v2 patch

Quoted 9 lines
---
  drivers/bluetooth/btusb.c | 2 ++
  1 file changed, 2 insertions(+)
drivers/bluetooth/btusb.c +0 -0
index 03039ceaa77d..a4fdf6549127 100644

drivers/bluetooth/btusb.c static const struct usb_device_id quirks_table[] = { · line 493

Quoted 6 lines
drivers/bluetooth/btusb.c +2 -0
@@ -488,6 +488,8 @@ static const struct usb_device_id quirks_table[] = {
  	{ USB_DEVICE(0x8087, 0x0037), .driver_info = BTUSB_INTEL_COMBINED },
  	{ USB_DEVICE(0x8087, 0x0038), .driver_info = BTUSB_INTEL_COMBINED },
  	{ USB_DEVICE(0x8087, 0x0039), .driver_info = BTUSB_INTEL_COMBINED 
 },
+	/* Otter Peak2, Wildcat Lake */
+	{ USB_DEVICE(0x8087, 0x0043), .driver_info = BTUSB_INTEL_COMBINED },

Please sort and put the comment on the same line as below. Ack, Will change in v2 patch

Quoted 3 lines
drivers/bluetooth/btusb.c +0 -0
  	{ USB_DEVICE(0x8087, 0x0040), .driver_info = BTUSB_INTEL_COMBINED }, /* Lizard Peak 2 */
  	{ USB_DEVICE(0x8087, 0x07da), .driver_info = BTUSB_CSR },

{ USB_DEVICE(0x8087, 0x07dc), .driver_info = BTUSB_INTEL_COMBINED |

Kind regards,

Paul

Regards,
Catherine L

#3 lore raw
In reply to Paul Menzel

Hi Paul,

Quoted 35 lines · Paul Menzel

Dear Catherine,

Thank you for your patch.

Am 02.09.26 um 18:04 schrieb Catherine L:

Quoted 1 line

From: "L, Catherine" <[email protected]>

Please use the format without comma: Catherine L.

Quoted 16 lines
$ lsusb
Bus 003 Device 003: ID 8087:0043 Intel Corp.
$ cat /sys/kernel/debug/usb/devices
T:  Bus=03 Lev=01 Prnt=01 Port=09 Cnt=02 Dev#=  3 Spd=12   MxCh= 0
D:  Ver= 2.01 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=8087 ProdID=0043 Rev= 0.00
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=81(I) Atr=03(Int.) MxPS=  64 Ivl=1ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
Quoted 1 line

Ditto.

Quoted 4 lines
---
  drivers/bluetooth/btusb.c | 2 ++
  1 file changed, 2 insertions(+)
Quoted 12 lines

drivers/bluetooth/btusb.c static const struct usb_device_id quirks_table[] = { · line 492

Quoted 10 lines
drivers/bluetooth/btusb.c +2 -0
index 03039ceaa77d..a4fdf6549127 100644
@@ -488,6 +488,8 @@ static const struct usb_device_id quirks_table[] = {
      { USB_DEVICE(0x8087, 0x0037), .driver_info = BTUSB_INTEL_COMBINED },
      { USB_DEVICE(0x8087, 0x0038), .driver_info = BTUSB_INTEL_COMBINED },
      { USB_DEVICE(0x8087, 0x0039), .driver_info = BTUSB_INTEL_COMBINED },
+     /* Otter Peak2, Wildcat Lake */
+     { USB_DEVICE(0x8087, 0x0043), .driver_info = BTUSB_INTEL_COMBINED },

Please sort and put the comment on the same line as below.

That's not a good idea, we still have the 80-column limit for the Bluetooth subsystem.

Quoted 8 lines

drivers/bluetooth/btusb.c static const struct usb_device_id quirks_table[] = { · line 495

Quoted 3 lines
drivers/bluetooth/btusb.c +0 -0
      { USB_DEVICE(0x8087, 0x0040), .driver_info = BTUSB_INTEL_COMBINED }, /* Lizard Peak 2 */
      { USB_DEVICE(0x8087, 0x07da), .driver_info = BTUSB_CSR },
      { USB_DEVICE(0x8087, 0x07dc), .driver_info = BTUSB_INTEL_COMBINED |

Kind regards,

Paul

Signature · 1 line
Luiz Augusto von Dentz
#4 lore raw
In reply to Catherine L

This is automated email and please do not reply to this email!

Dear submitter,

Thank you for submitting the patches to the linux bluetooth mailing list. This is a CI test results with your patch series:
PW Link:https://patchwork.kernel.org/project/bluetooth/list/?series=1156048

---Test result---

Test Summary:

CheckPatch                    PASS      0.74 seconds
VerifyFixes                   PASS      0.14 seconds
VerifySignedoff               PASS      0.14 seconds
GitLint                       PASS      0.34 seconds
SubjectPrefix                 PASS      0.13 seconds
BuildKernel                   PASS      27.58 seconds
CheckAllWarning               PASS      30.71 seconds
CheckSparse                   PASS      29.16 seconds
BuildKernel32                 PASS      26.46 seconds
CheckKernelLLVM               SKIP      0.00 seconds
TestRunnerSetup               PASS      503.41 seconds
IncrementalBuild              PASS      26.24 seconds

Details
##############################
Test: CheckKernelLLVM - SKIP
Desc: Build kernel with LLVM + context analysis
Output:
Clang not found

https://github.com/bluez/bluetooth-next/pull/686

---
Regards,
Linux Bluetooth