arm64: dts: airoha: add AN7589 support
Subsystems (3)
v2 cover arm64: dts: airoha: add AN7589 support
The Airoha AN7589 is a quad Cortex-A73 SoC. This series adds its board compatibles, a base SoC dtsi with the CPUs, PSCI, the GICv3, the architected timer and the console UART, and the device tree of the evaluation board with 2 GiB of DRAM.
The remaining blocks follow with the series of their drivers.
The series applies to next-20261105 and has no dependencies.
Changes in v2:
- Patch 1: add Acked-by of Conor.
- Patch 2: set the size of the GICV region to 0x2000 and order the nodes and properties as Documentation/devicetree/bindings/dts-coding-style.rst describes.
- Link to v1: https://lore.kernel.org/r/[email protected]
John Crispin (3):
dt-bindings: arm: airoha: add AN7589
arm64: dts: airoha: add AN7589 SoC dtsi
arm64: dts: airoha: add AN7589 evaluation board
.../devicetree/bindings/arm/airoha.yaml | 4 + arch/arm64/boot/dts/airoha/Makefile | 1 + arch/arm64/boot/dts/airoha/an7589-evb.dts | 22 +++ arch/arm64/boot/dts/airoha/an7589.dtsi | 134 ++++++++++++++++++ 4 files changed, 161 insertions(+) create mode 100644 arch/arm64/boot/dts/airoha/an7589-evb.dts create mode 100644 arch/arm64/boot/dts/airoha/an7589.dtsi
base-commit: ddfe51b0a0f5dc9e415cc2c8ad8db17532dd426b
Signature · 1 line
2.34.1
PATCH v2 1/3 dt-bindings: arm: airoha: add AN7589
The AN7589 is the next generation Airoha SoC. Document the SoC compatible and the compatible for the Airoha evaluation board.
--- Documentation/devicetree/bindings/arm/airoha.yaml | 4 ++++ 1 file changed, 4 insertions(+)
Documentation/devicetree/bindings/arm/airoha.yaml +4 -0
@@ -26,6 +26,10 @@ properties: - enum: - airoha,en7581-evb - const: airoha,en7581 + - items: + - enum: + - airoha,an7589-evb + - const: airoha,an7589 additionalProperties: true
Signature · 1 line
2.34.1
PATCH v2 2/3 arm64: dts: airoha: add AN7589 SoC dtsi
In reply to John CrispinAdd the device tree for the Airoha AN7589 SoC. It describes the four Cortex-A73 cores, which the firmware brings up over PSCI, the GICv3, the architected timer and the console UART.
The UART runs from a fixed 1.8432 MHz clock, so the console works before the SCU clock controller probes. The remaining blocks follow later.
---
Changes in v2:
- Set the size of the GICV region to 0x2000. The virtual CPU interface has two 4 KiB pages, with GICV_DIR in the second page.
- Order the nodes and properties as dts-coding-style.rst describes.
arch/arm64/boot/dts/airoha/an7589.dtsi | 134 +++++++++++++++++++++++++ 1 file changed, 134 insertions(+) create mode 100644 arch/arm64/boot/dts/airoha/an7589.dtsi
arch/arm64/boot/dts/airoha/an7589.dtsi new file +134 -0
@@ -0,0 +1,134 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) + +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/ { + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + clk1843200: clock-1843200 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <1843200>; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu-map { + cluster0 { + core0 { + cpu = <&cpu0>; + }; + + core1 { + cpu = <&cpu1>; + }; + + core2 { + cpu = <&cpu2>; + }; + + core3 { + cpu = <&cpu3>; + }; + }; + }; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a73"; + reg = <0x0>; + enable-method = "psci"; + next-level-cache = <&l2>; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a73"; + reg = <0x1>; + enable-method = "psci"; + next-level-cache = <&l2>; + }; + + cpu2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a73"; + reg = <0x2>; + enable-method = "psci"; + next-level-cache = <&l2>; + }; + + cpu3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a73"; + reg = <0x3>; + enable-method = "psci"; + next-level-cache = <&l2>; + }; + + l2: l2-cache { + compatible = "cache"; + cache-size = <0x80000>; + cache-line-size = <64>; + cache-level = <2>; + cache-unified; + }; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + reserved-memory { + ranges; + #address-cells = <2>; + #size-cells = <2>; + + atf@80000000 { + reg = <0x0 0x80000000 0x0 0x200000>; + no-map; + }; + }; + + soc { + compatible = "simple-bus"; + ranges; + #address-cells = <2>; + #size-cells = <2>; + + gic: interrupt-controller@c000000 { + compatible = "arm,gic-v3"; + reg = <0x0 0x0c000000 0x0 0x40000>, + <0x0 0x0c080000 0x0 0x200000>, + <0x0 0x0c400000 0x0 0x2000>, + <0x0 0x0c410000 0x0 0x1000>, + <0x0 0x0c420000 0x0 0x2000>; + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + #interrupt-cells = <3>; + }; + + uart1: serial@1fbf0000 { + compatible = "ns16550"; + reg = <0x0 0x1fbf0000 0x0 0x30>; + reg-io-width = <4>; + reg-shift = <2>; + interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk1843200>; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupt-parent = <&gic>; + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; + }; +};
Signature · 1 line
2.34.1
PATCH v2 3/3 arm64: dts: airoha: add AN7589 evaluation board
In reply to John CrispinAdd the device tree for the Airoha AN7589 evaluation board, with 2 GiB of DRAM and the console on UART1.
--- arch/arm64/boot/dts/airoha/Makefile | 1 + arch/arm64/boot/dts/airoha/an7589-evb.dts | 22 ++++++++++++++++++++++ 2 files changed, 23 insertions(+) create mode 100644 arch/arm64/boot/dts/airoha/an7589-evb.dts
arch/arm64/boot/dts/airoha/Makefile +1 -0
@@ -1,2 +1,3 @@ # SPDX-License-Identifier: GPL-2.0-only +dtb-$(CONFIG_ARCH_AIROHA) += an7589-evb.dtb dtb-$(CONFIG_ARCH_AIROHA) += en7581-evb.dtb
arch/arm64/boot/dts/airoha/an7589-evb.dts new file +22 -0
@@ -0,0 +1,22 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +/dts-v1/; + +#include "an7589.dtsi" + +/ { + model = "Airoha AN7589 Evaluation Board"; + compatible = "airoha,an7589-evb", "airoha,an7589"; + + aliases { + serial0 = &uart1; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x0 0x80000000 0x0 0x80000000>; + }; +};
Signature · 1 line
2.34.1