arm64: dts: qcom: Add HP OmniBook X 16-cp1

This adds a device tree for the HP OmniBook X 16-cp1 (board 8F46), a 16" laptop with the 12-core Snapdragon X2 Elite (Mahua).

Tested with Ubuntu's 7.3-based linux-qcom-x1e
kernel. Everything listed in patch 2 works there, including suspend (s2idle).

Notes:
- DisplayPort at HBR2 needs "phy: qualcomm: qmp-combo: update DP PHY PLL programming on Glymur" v6 [1] (tested with v5). Without it the stream runs at half rate and the monitor shows no picture. With it, about 1 in 4 plug-ins still gives no picture; replugging fixes it.
- The GPU is enabled as in mahua.dtsi. Tested with the msm driver patch from "drm/msm: Mahua GPU support" [2].
- Audio needs a topology and UCM config for the "HP-OmniBook-X16" model, which are not upstream yet. The headphone jack (SDCA) is not described.

This series was written with the help of an AI coding assistant (Claude): the device tree started from glymur-hp-elitebook-x-g2q.dts and the laptop's ACPI tables. I went through the regulators against the ACPI power votes for v3. I reviewed it and tested it on the laptop.

Earlier bring-up report: [3]

Changes in v5:
- Drop the &gpu and &gmu "disabled" overrides, mahua.dtsi now describes the Mahua GPU (reported by Sashiko)
- Drop refgen-supply from usb_2_qmpphy and use the common l4f1. The ACPI tables vote both l1c1 and l4f1 for this port, so they don't decide it (reported by Sashiko)
- Drop the stale regulator sentence from the commit message
- Link to v4: https://lore.kernel.org/r/[email protected]

Changes in v4:
- Rebase on qcom for-next: drop the PMIC includes, &apps_rsc, &tcsr, the SMB2370 repeaters and the phy supplies that mahua.dtsi and glymur-cob.dtsi now provide, and use the new regulator labels
- vreg_l2f0 is now 944 mV from the common file (was 936 mV); tested
- Keep refgen-supply = <&vreg_l1c1> on usb_2_qmpphy, which matches the ACPI power votes on this laptop
- Move the pcie4 endpoint under &pcie4_port0, since glymur.dtsi no longer has pcie4_port0_ep
- Link to v3: https://lore.kernel.org/r/[email protected]

Changes in v3:
- Set vreg_l1f_e1 to 904 mV (was 880 mV, copied from the EliteBook) to match the ACPI power votes on this laptop, rename it to vreg_l1f_e1_0p9 (Konrad)
- Add Acked-by to patch 1 (Krzysztof)
- Link to v2: https://lore.kernel.org/r/[email protected]

Changes in v2:
- Add static data-lanes to usb_2_qmpphy so the PHY uses USB3-only mode (reported by Sashiko)
- Drop the Assisted-by tag, describe the tool use in the changelog instead (Krzysztof)
- Link to v1: https://lore.kernel.org/r/[email protected]

[1] https://lore.kernel.org/all/[email protected]/
[2] https://lore.kernel.org/all/[email protected]/
[3] https://lore.kernel.org/all/CAAnD8Rb4ZZrHFWMJayabioB_8bOHh1mqZ5LCXZz0jTNGMA7UZQ@mail.gmail.com/

Jeff Roach (2):
dt-bindings: arm: qcom: Add HP OmniBook X 16-cp1
arm64: dts: qcom: Add HP OmniBook X 16-cp1

 .../devicetree/bindings/arm/qcom.yaml         |   1 +
 arch/arm64/boot/dts/qcom/Makefile             |   1 +
 .../boot/dts/qcom/mahua-hp-omnibook-x16.dts   | 647 ++++++++++++++++++
 3 files changed, 649 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/mahua-hp-omnibook-x16.dts

base-commit: 14825c9204bad7f4e0bd3a528cbf4a7e24e757d0

2.55.0

Document the HP OmniBook X 16-cp1 laptop, based on the Qualcomm Mahua (Snapdragon X2 Elite, 12 cores) SoC.

---
 Documentation/devicetree/bindings/arm/qcom.yaml | 1 +
 1 file changed, 1 insertion(+)

index 7ffa4f6998..c3b6014ad6 100644
@@ -212,6 +212,7 @@ properties:
 
       - items:
           - enum:
+              - hp,omnibook-x16-cp1
               - microsoft,surface-laptop-8-13p8
               - qcom,mahua-crd
               - qcom,mahua-qcb

2.55.0

Add a device tree for the HP OmniBook X 16-cp1 laptop, based on the Qualcomm Mahua (Snapdragon X2 Elite, 12 cores) SoC.

Supported and tested:
- Keyboard, touchpad and touchscreen over I2C HID
- Lid switch
- NVMe SSD (PCIe 5)
- Qualcomm QCC2072 Wi-Fi (PCIe 4, M.2 key E slot)
- Two USB-C ports with orientation switching, USB PD and battery reporting through pmic-glink
- USB-A port (usb_2)
- Webcam on the internal USB 2.0 host
- eDP OLED panel with DP AUX backlight
- DisplayPort alt mode on both USB-C ports
- ADSP and CDSP remoteprocs
- Two speakers (WSA8845) and two digital microphones

This device tree was written with the help of an AI coding assistant (Claude), starting from glymur-hp-elitebook-x-g2q.dts and the laptop's ACPI tables. I reviewed it and tested every feature listed above on the laptop.

---
 arch/arm64/boot/dts/qcom/Makefile             |   1 +
 .../boot/dts/qcom/mahua-hp-omnibook-x16.dts   | 647 ++++++++++++++++++
 2 files changed, 648 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/mahua-hp-omnibook-x16.dts

index 8329c06b60..e84836e5c5 100644
@@ -74,6 +74,7 @@ dtb-$(CONFIG_ARCH_QCOM)	+= lemans-evk-el2.dtb
 lemans-evk-ifp-mezzanine-dtbs	:= lemans-evk.dtb lemans-evk-ifp-mezzanine.dtbo
 dtb-$(CONFIG_ARCH_QCOM)	+= lemans-evk-ifp-mezzanine.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= mahua-crd.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= mahua-hp-omnibook-x16.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= mahua-lenovo-thinkpad-t14s-gen7-lcd.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= mahua-qcb.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= milos-fairphone-fp6.dtb

2.55.0