Skip to contentSkip to conversation

arm64: dts: freescale: imx95-aquila: Add ath12k calibration variant

PATCH In review Vitor Soares 2 participants 2 messages Nov 18

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 arm64: dts: freescale: imx95-aquila: Add ath12k calibration variant

From: Vitor Soares <[email protected]>

The Aquila iMX95 has a Silex SX-PCEBE Wi-Fi module (WCN7850). The module reports the same PCI and QMI IDs as other WCN7850 designs, and its board data also comes in variants for different regulatory domains (US/EU/JP, UK/CA low and high). The IDs alone therefore cannot identify the right board data.

Describe the Wi-Fi device behind the PCIe1 root port and set qcom,calibration-variant to the US/EU/JP board data.

---
Depends on the qcom,ath12k binding changes in ath-next:
- 75bc725cd92b ("dt-bindings: wireless: ath12k: allow calibration variant for WCN7850")
- "dt-bindings: wireless: ath12k: Make WCN7850 supplies optional"
https://lore.kernel.org/all/[email protected]/

Until they are merged, dtbs_check reports the missing supplies and qcom,calibration-variant for this node.

---
 arch/arm64/boot/dts/freescale/imx95-aquila.dtsi | 8 ++++++++
 1 file changed, 8 insertions(+)
arch/arm64/boot/dts/freescale/imx95-aquila.dtsi +8 -0
index a1870f7b2eca..a73d137af2c4 100644
@@ -621,6 +621,14 @@ &pcie1 {
 	status = "okay";
 };
 
+&pcie1_port0 {
+	wifi@0 {
+		compatible = "pci17cb,1107";
+		reg = <0x10000 0x0 0x0 0x0 0x0>;
+		qcom,calibration-variant = "Silex_SX-PCEBE_US_EU_JP";
+	};
+};
+
 /* Aquila I2S_1 */
 &sai2 {
 	pinctrl-names = "default";

base-commit: 33adc96ac217d6e95b7c44ac383c19ca4ae2ff52

Signature · 1 line
2.53.0
Reviewed-by on v1 1/1
#1 lore raw
Quoted 8 lines · Vitor Soares

From: Vitor Soares <[email protected]>

The Aquila iMX95 has a Silex SX-PCEBE Wi-Fi module (WCN7850). The module reports the same PCI and QMI IDs as other WCN7850 designs, and its board data also comes in variants for different regulatory domains (US/EU/JP, UK/CA low and high). The IDs alone therefore cannot identify the right board data.

Quoted 4 lines

Describe the Wi-Fi device behind the PCIe1 root port and set qcom,calibration-variant to the US/EU/JP board data.