arm64: dts: freescale: imx95-aquila: Add ath12k calibration variant
PATCH 1/1 arm64: dts: freescale: imx95-aquila: Add ath12k calibration variant
From: Vitor Soares <[email protected]>
The Aquila iMX95 has a Silex SX-PCEBE Wi-Fi module (WCN7850). The module reports the same PCI and QMI IDs as other WCN7850 designs, and its board data also comes in variants for different regulatory domains (US/EU/JP, UK/CA low and high). The IDs alone therefore cannot identify the right board data.
Describe the Wi-Fi device behind the PCIe1 root port and set qcom,calibration-variant to the US/EU/JP board data.
---
Depends on the qcom,ath12k binding changes in ath-next:
- 75bc725cd92b ("dt-bindings: wireless: ath12k: allow calibration variant for WCN7850")
- "dt-bindings: wireless: ath12k: Make WCN7850 supplies optional"
https://lore.kernel.org/all/[email protected]/
Until they are merged, dtbs_check reports the missing supplies and qcom,calibration-variant for this node.
--- arch/arm64/boot/dts/freescale/imx95-aquila.dtsi | 8 ++++++++ 1 file changed, 8 insertions(+)
arch/arm64/boot/dts/freescale/imx95-aquila.dtsi +8 -0
@@ -621,6 +621,14 @@ &pcie1 { status = "okay"; }; +&pcie1_port0 { + wifi@0 { + compatible = "pci17cb,1107"; + reg = <0x10000 0x0 0x0 0x0 0x0>; + qcom,calibration-variant = "Silex_SX-PCEBE_US_EU_JP"; + }; +}; + /* Aquila I2S_1 */ &sai2 { pinctrl-names = "default";
base-commit: 33adc96ac217d6e95b7c44ac383c19ca4ae2ff52
Signature · 1 line
2.53.0
Quoted 8 lines · Vitor Soares
From: Vitor Soares <[email protected]>
The Aquila iMX95 has a Silex SX-PCEBE Wi-Fi module (WCN7850). The module reports the same PCI and QMI IDs as other WCN7850 designs, and its board data also comes in variants for different regulatory domains (US/EU/JP, UK/CA low and high). The IDs alone therefore cannot identify the right board data.
Quoted 4 lines
Describe the Wi-Fi device behind the PCIe1 root port and set qcom,calibration-variant to the US/EU/JP board data.
Signed-off-by Vitor Soares <[email protected]>