Disabling IRQ #11 - uhci || e100 || r128-dri problem
In recent 2.6.12 prereleases a bug has appeared. Whenever I log out of KDE, IRQ 11 is disabled on X server restart (kdm restarts it). It always results with the dmesg below and sometimes the new X loses keyboard input (ps2 keyboard, usb mouse). USB mouse works well. X works (sans keyboard sometimes). Network is dead.
irq 11: nobody cared!
[<c0136144>] __report_bad_irq+0x24/0x90 [<c0136241>] note_interrupt+0x61/0x90 [<c0135c1b>] __do_IRQ+0x13b/0x150 [<c0105607>] do_IRQ+0x47/0x70 ======================= [<c0103b2a>] common_interrupt+0x1a/0x20 [<c011dfce>] __do_softirq+0x2e/0x80 [<c0105711>] do_softirq+0x41/0x50 ======================= [<c011e0e5>] irq_exit+0x35/0x40 [<c010560e>] do_IRQ+0x4e/0x70 [<c0103b2a>] common_interrupt+0x1a/0x20
handlers:
[<e09622b0>] (usb_hcd_irq+0x0/0x60 [usbcore])
[<c02aabb0>] (e100_intr+0x0/0x150)
Disabling IRQ #11
Celeron 900, Intel ICH2 chipset with integrated UHCI and onboard e100 NIC, running Debian unstable with XFree 4.3. 2.6.12-rc2 + XFree of that time was OK, didn't try rc3 and rc4, rc5 probably also not tested but rc5+git snapshots are the broken ones (together with current XFree). ATI rage128 graphics with DRI enabled; I get the following dmesg lines on X server start and at least the agpgart lines on each X server restart too. I have seen this bug some time earlier too, probably in 2.6.11 timeframe, or in early 2.6.12 timeframe.
[drm] Initialized r128 2.5.0 20030725 on minor 0: ATI Technologies Inc Rage 128 RF/SG AGP
agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V2 device at 0000:00:00.0 into 2x mode
agpgart: Putting AGP V2 device at 0000:02:00.0 into 2x mode
/proc/interrupts during normal work:
CPU0
0: 13006046 XT-PIC timer 1: 26607 XT-PIC i8042 2: 0 XT-PIC cascade 7: 1 XT-PIC parport0 8: 4 XT-PIC rtc 9: 1 XT-PIC acpi, Intel 82801BA-ICH2 10: 336628 XT-PIC uhci_hcd:usb2 11: 1161748 XT-PIC uhci_hcd:usb1, eth0, r128@PCI:2:0:0 14: 48258 XT-PIC ide0 15: 194377 XT-PIC ide1 NMI: 2680 LOC: 13007697 ERR: 0 MIS: 0
Signature · 1 line
Meelis Roos ([email protected])
Quoted 5 lines
In recent 2.6.12 prereleases a bug has appeared. Whenever I log out of KDE, IRQ 11 is disabled on X server restart (kdm restarts it). It always results with the dmesg below and sometimes the new X loses keyboard input (ps2 keyboard, usb mouse). USB mouse works well. X works (sans keyboard sometimes). Network is dead.
It looks like X or something is causing the r128 to emit an IRQ after we've stopped listening for them,...
Can you see if you get any info with drm debug on?
echo 1 > /sys/modules/drm/parameters/debug
and restart X...
Dave.