Skip to contentSkip to conversation

Disabling IRQ #11 - uhci || e100 || r128-dri problem

DISCUSSION Meelis Roos 2 participants 2 messages Jun 2, 2005 – Jun 4, 2005

lore
Share & tools
lore
#0 lore raw

In recent 2.6.12 prereleases a bug has appeared. Whenever I log out of KDE, IRQ 11 is disabled on X server restart (kdm restarts it). It always results with the dmesg below and sometimes the new X loses keyboard input (ps2 keyboard, usb mouse). USB mouse works well. X works (sans keyboard sometimes). Network is dead.

irq 11: nobody cared!

 [<c0136144>] __report_bad_irq+0x24/0x90
 [<c0136241>] note_interrupt+0x61/0x90
 [<c0135c1b>] __do_IRQ+0x13b/0x150
 [<c0105607>] do_IRQ+0x47/0x70
 =======================
 [<c0103b2a>] common_interrupt+0x1a/0x20
 [<c011dfce>] __do_softirq+0x2e/0x80
 [<c0105711>] do_softirq+0x41/0x50
 =======================
 [<c011e0e5>] irq_exit+0x35/0x40
 [<c010560e>] do_IRQ+0x4e/0x70
 [<c0103b2a>] common_interrupt+0x1a/0x20

handlers:
[<e09622b0>] (usb_hcd_irq+0x0/0x60 [usbcore])
[<c02aabb0>] (e100_intr+0x0/0x150)

Disabling IRQ #11
Celeron 900, Intel ICH2 chipset with integrated UHCI and onboard e100 NIC, running Debian unstable with XFree 4.3. 2.6.12-rc2 + XFree of that time was OK, didn't try rc3 and rc4, rc5 probably also not tested but rc5+git snapshots are the broken ones (together with current XFree). ATI rage128 graphics with DRI enabled; I get the following dmesg lines on X server start and at least the agpgart lines on each X server restart too. I have seen this bug some time earlier too, probably in 2.6.11 timeframe, or in early 2.6.12 timeframe.

[drm] Initialized r128 2.5.0 20030725 on minor 0: ATI Technologies Inc Rage 128 RF/SG AGP
agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V2 device at 0000:00:00.0 into 2x mode
agpgart: Putting AGP V2 device at 0000:02:00.0 into 2x mode

/proc/interrupts during normal work:
CPU0

  0:   13006046          XT-PIC  timer
  1:      26607          XT-PIC  i8042
  2:          0          XT-PIC  cascade
  7:          1          XT-PIC  parport0
  8:          4          XT-PIC  rtc
  9:          1          XT-PIC  acpi, Intel 82801BA-ICH2
 10:     336628          XT-PIC  uhci_hcd:usb2
 11:    1161748          XT-PIC  uhci_hcd:usb1, eth0, r128@PCI:2:0:0
 14:      48258          XT-PIC  ide0
 15:     194377          XT-PIC  ide1
NMI:       2680
LOC:   13007697
ERR:          0
MIS:          0
Signature · 1 line
Meelis Roos ([email protected])
#1 lore raw
Quoted 5 lines

In recent 2.6.12 prereleases a bug has appeared. Whenever I log out of KDE, IRQ 11 is disabled on X server restart (kdm restarts it). It always results with the dmesg below and sometimes the new X loses keyboard input (ps2 keyboard, usb mouse). USB mouse works well. X works (sans keyboard sometimes). Network is dead.

It looks like X or something is causing the r128 to emit an IRQ after we've stopped listening for them,...

Can you see if you get any info with drm debug on?

echo 1 > /sys/modules/drm/parameters/debug
and restart X...
Dave.