Booting from USB with initrd
Quoted 1 line · gabriel
Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block
(1,0)
Quoted 1 line
Hi Gabriel!
Hi!
Quoted 6 lines
It looks like initrd.gz could not be mounted. The unknown-block(1,0) is
/dev/ram0(and has normally initrd attached to it) as specified on kernel command line.Do you use an initrd or an initramfs? Is the kernel compiled with initrd support? Is the ramdisk size big enough to hold your initrd?
I'm no really sure what the difference is. initrd.gz is a compressed file with a minix on it. Its created automaticly with build-initrd.sh from loop- aes
package.
the ramdisk is 4096 which should be sufficient and yes the kernel has intrd support.
Quoted 1 line
regards
Have you edit the build-initrd.sh script to fit your needs?
Does
http://featherlinux.berlios.de/usb-instructions.htm or
http://www.ussg.iu.edu/hypermail/linux/kernel/0211.1/0551.html help?)
Totally different Q's:
Have you called syslinux with the correct parameter to find your initrd.gz?
Do you have access to DOS bootable drive (To try to boot the kernel using loadlin from DOS command prompt. If that works you know that the issues are regarded to syslinux, if not - initrd/kernel) (?)
Have you tried to boot kernel + initrd from your local linux installation?
regards