Skip to contentSkip to conversation

Booting from USB with initrd

DISCUSSION gabriel 2 participants 2 messages Apr 15, 2005

lore
Share & tools
lore

gabriel

author
#0 lore raw
Quoted 1 line · gabriel
Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block

(1,0)

Quoted 1 line

Hi Gabriel!

Hi!

Quoted 6 lines

It looks like initrd.gz could not be mounted. The unknown-block(1,0) is /dev/ram0 (and has normally initrd attached to it) as specified on kernel command line.

Do you use an initrd or an initramfs? Is the kernel compiled with initrd support? Is the ramdisk size big enough to hold your initrd?

I'm no really sure what the difference is. initrd.gz is a compressed file with a minix on it. Its created automaticly with build-initrd.sh from loop- aes
package.

the ramdisk is 4096 which should be sufficient and yes the kernel has intrd support.

Quoted 1 line

regards

#1 lore raw

Have you edit the build-initrd.sh script to fit your needs?

Does
http://featherlinux.berlios.de/usb-instructions.htm or
http://www.ussg.iu.edu/hypermail/linux/kernel/0211.1/0551.html help?)

Totally different Q's:

Have you called syslinux with the correct parameter to find your initrd.gz?

Do you have access to DOS bootable drive (To try to boot the kernel using loadlin from DOS command prompt. If that works you know that the issues are regarded to syslinux, if not - initrd/kernel) (?)

Have you tried to boot kernel + initrd from your local linux installation?

regards