Skip to contentSkip to conversation

R: Re: mtu issue with ipsec tunnel and netfilter snat

DISCUSSION [email protected] 1 participant 1 message Jan 9, 2013

Subsystems (2)
lore
Share & tools
lore
#0 lore raw
Quoted 8 lines · [email protected] wrote:
Quoted 6 lines · On Wednesday 2013-01-09 10:01, [email protected] wrote:

As you can see there are incoming 1500 bytes packets (these are the decrypted ipsec packets) with DF bit set. These packets are never delivered to the final client 10.81.128.176 (the destination address is 172.16.128.1 which is the ip used for SNATing the original ip 10.81.128.176).

Quoted 7 lines
Quoted 5 lines

IMHO this is a mtu issue: 1500 bytes packets cannot be routed inside the ipsec tunnel.

But why linux_gw_snat is not sending icmp need to frag packets to 10.148.12.23?

Perhaps because ICMP was blocked erroneously?

No, I have opened the firewall
rules with something like:

iptables -I OUTPUT --proto icmp -j ACCEPT
iptables -I INPUT --proto icmp -j ACCEPT