R: Re: mtu issue with ipsec tunnel and netfilter snat
Subsystems (2)
Quoted 8 lines · [email protected] wrote:
Quoted 6 lines · On Wednesday 2013-01-09 10:01, [email protected] wrote:
As you can see there are incoming 1500 bytes packets (these are the decrypted ipsec packets) with DF bit set. These packets are never delivered to the final client 10.81.128.176 (the destination address is 172.16.128.1 which is the ip used for SNATing the original ip 10.81.128.176).
Quoted 7 lines
Quoted 5 lines
IMHO this is a mtu issue: 1500 bytes packets cannot be routed inside the ipsec tunnel.
But why
linux_gw_snatis not sending icmp need to frag packets to 10.148.12.23?Perhaps because ICMP was blocked erroneously?
No, I have opened the firewall
rules with something like:
iptables -I OUTPUT --proto icmp -j ACCEPT
iptables -I INPUT --proto icmp -j ACCEPT