block/pflash_cfi02: Implement missing AMD pflash functionality
v5 cover block/pflash_cfi02: Implement missing AMD pflash functionality
Hi,
This series is based on Stephen Checkoway work (v4):
https://lists.gnu.org/archive/html/qemu-devel/2019-04/msg04595.html
Stephen work is a great improvement of the actual code, however while reviewing his patches, I found them quite dense, so I started to split each logical change to be able to digest his series.
Sfephen implemented the 'interleaving' feature in way I am not yet confident it is in the project best interest. The relevant thread started here:
https://lists.gnu.org/archive/html/qemu-devel/2019-06/msg05395.html
However meanwhile we will discuss his interleaving implementation, I don't want to block the rest of his work, so I took that patch of (and rebased his work).
I'm spamming all the maintainers of the boards using pflash_cfi02_register(). This series is not 'block' related, it is a classical 'device' model series.
Help reviewing is appreciated :)
I am still looking for real-world code stressing this flash model.
Regards,
Phil.
Philippe Mathieu-Daudé (20):
hw/block/pflash: Simplify trace_pflash_io_read/write() hw/block/pflash: Simplify trace_pflash_data_read/write() hw/block/pflash_cfi02: Fix debug format string hw/block/pflash_cfi02: Add an enum to define the write cycles hw/block/pflash_cfi02: Add helpers to manipulate the status bits hw/block/pflash_cfi02: Simplify a statement using fall through hw/block/pflash_cfi02: Use the ldst API in pflash_write() hw/block/pflash_cfi02: Use the ldst API in pflash_read() hw/block/pflash_cfi02: Extract the pflash_data_read() function hw/block/pflash_cfi02: Unify the MemoryRegionOps tests/pflash-cfi02: Refactor to support testing multiple
configurations
hw/block/pflash_cfi02: Remove pointless local variable hw/block/pflash_cfi02: Document the current CFI values hw/block/pflash_cfi02: Hold the PRI table offset in a variable hw/block/pflash_cfi02: Document 'Page Mode' operations are not
supported
hw/block/pflash_cfi02: Extract pflash_regions_count() hw/block/pflash_cfi02: Split if() condition hw/block/pflash_cfi02: Reduce single byte/word write delay hw/block/pflash_cfi02: Document commands hw/block/pflash_cfi02: Reduce I/O accesses to 16-bit
Stephen Checkoway (8):
tests/pflash-cfi02: Add test for supported CFI commands hw/block/pflash_cfi02: Fix command address comparison hw/block/pflash_cfi02: Implement nonuniform sector sizes hw/block/pflash_cfi02: Fix CFI in autoselect mode hw/block/pflash_cfi02: Fix reset command not ignored during erase hw/block/pflash_cfi02: Implement multi-sector erase hw/block/pflash_cfi02: Implement erase suspend/resume hw/block/pflash_cfi02: Use chip erase time specified in the CFI table
hw/block/pflash_cfi01.c | 11 +- hw/block/pflash_cfi02.c | 703 ++++++++++++++++++++++++++------------ hw/block/trace-events | 10 +- tests/Makefile.include | 2 + tests/pflash-cfi02-test.c | 681 ++++++++++++++++++++++++++++++++++++ 5 files changed, 1173 insertions(+), 234 deletions(-) create mode 100644 tests/pflash-cfi02-test.c
Signature · 1 line
2.20.1
PATCH v5 1/28 tests/pflash-cfi02: Add test for supported CFI commands
From: Stephen Checkoway <[email protected]>
Test the AMD command set for parallel flash chips. This test uses an ARM musicpal board with a pflash drive to test the following list of currently-supported commands.
- Autoselect
- CFI
- Sector erase
- Chip erase
- Program
- Unlock bypass
- Reset
Message-Id: <[email protected]>
--- tests/Makefile.include | 2 + tests/pflash-cfi02-test.c | 225 ++++++++++++++++++++++++++++++++++++++ 2 files changed, 227 insertions(+) create mode 100644 tests/pflash-cfi02-test.c
tests/Makefile.include +2 -0
@@ -260,6 +260,7 @@ check-qtest-arm-y += tests/m25p80-test$(EXESUF) check-qtest-arm-y += tests/test-arm-mptimer$(EXESUF) check-qtest-arm-y += tests/boot-serial-test$(EXESUF) check-qtest-arm-y += tests/hexloader-test$(EXESUF) +check-qtest-arm-$(CONFIG_PFLASH_CFI02) += tests/pflash-cfi02-test$(EXESUF) check-qtest-aarch64-y = tests/numa-test$(EXESUF) check-qtest-aarch64-y += tests/boot-serial-test$(EXESUF)
@@ -767,6 +768,7 @@ tests/device-introspect-test$(EXESUF): tests/device-introspect-test.o tests/rtc-test$(EXESUF): tests/rtc-test.o tests/m48t59-test$(EXESUF): tests/m48t59-test.o tests/hexloader-test$(EXESUF): tests/hexloader-test.o +tests/pflash-cfi02$(EXESUF): tests/pflash-cfi02-test.o tests/endianness-test$(EXESUF): tests/endianness-test.o tests/prom-env-test$(EXESUF): tests/prom-env-test.o $(libqos-obj-y) tests/rtas-test$(EXESUF): tests/rtas-test.o $(libqos-spapr-obj-y)
tests/pflash-cfi02-test.c new file +225 -0
225 lines not on this page · raw message
Signature · 1 line
2.20.1
PATCH v5 2/28 hw/block/pflash: Simplify trace_pflash_io_read/write()
In reply to Philippe Mathieu-DaudéCall the read() trace function after the value is set, so we can log the returned value.
Rename the I/O trace functions with '_io_' in their name.
--- hw/block/pflash_cfi01.c | 5 +++-- hw/block/pflash_cfi02.c | 6 ++---- hw/block/trace-events | 4 ++-- 3 files changed, 7 insertions(+), 8 deletions(-)
hw/block/pflash_cfi01.c +3 -2
@@ -288,7 +288,6 @@ static uint32_t pflash_read(PFlashCFI01 *pfl, hwaddr offset,uint32_t ret; ret =-1 ; -trace_pflash_read (offset, pfl->cmd, width, pfl->wcycle);switch (pfl->cmd) {default :/* This should never happen : reset state & treat it as a read */
@@ -391,6 +390,8 @@ static uint32_t pflash_read(PFlashCFI01 *pfl, hwaddr offset,break ; } +trace_pflash_io_read (offset, width, width <<1 , ret, pfl->cmd, pfl->wcycle); +return ret; }
@@ -453,7 +454,7 @@ static void pflash_write(PFlashCFI01 *pfl, hwaddr offset, cmd = value; -trace_pflash_write (offset, value, width, pfl->wcycle); +trace_pflash_io_write (offset, width, width <<1 , value, pfl->wcycle);if (!pfl->wcycle) {/* Set the device in I/O access mode */ memory_region_rom_device_set_romd (&pfl->mem, false);
hw/block/pflash_cfi02.c +2 -4
@@ -145,7 +145,6 @@ static uint32_t pflash_read(PFlashCFI02 *pfl, hwaddr offset,uint8_t *p; ret =-1 ; -trace_pflash_read (offset, pfl->cmd, width, pfl->wcycle);/* Lazy reset to ROMD mode after a certain amount of read accesses */ if (!pfl->rom_mode && pfl->wcycle ==0 && ++pfl->read_counter >PFLASH_LAZY_ROMD_THRESHOLD ) {
@@ -241,6 +240,7 @@ static uint32_t pflash_read(PFlashCFI02 *pfl, hwaddr offset, }break ; } +trace_pflash_io_read (offset, width, width <<1 , ret, pfl->cmd, pfl->wcycle);return ret; }
@@ -267,6 +267,7 @@ static void pflash_write(PFlashCFI02 *pfl, hwaddr offset,uint8_t *p;uint8_t cmd; +trace_pflash_io_write (offset, width, width <<1 , value, pfl->wcycle); cmd = value;if (pfl->cmd !=0xA0 && cmd ==0xF0 ) {#if 0
@@ -275,11 +276,8 @@ static void pflash_write(PFlashCFI02 *pfl, hwaddr offset,#endif goto reset_flash; } -trace_pflash_write (offset, value, width, pfl->wcycle); offset &= pfl->chip_len -1 ; -DPRINTF ("%s: offset " TARGET_FMT_plx" %08x %d\n" , __func__, - offset, value, width); boff = offset & (pfl->sector_len -1 );if (pfl->width ==2 ) boff = boff >>1 ;
hw/block/trace-events +2 -2
@@ -7,9 +7,9 @@ fdc_ioport_write(uint8_t reg, uint8_t value) "write reg 0x%02x val 0x%02x" # pflash_cfi02.c # pflash_cfi01.c pflash_reset(void) "reset" -pflash_read(uint64_t offset, uint8_t cmd, int width, uint8_t wcycle) "offset:0x%04"PRIx64" cmd:0x%02x width:%d wcycle:%u" -pflash_write(uint64_t offset, uint32_t value, int width, uint8_t wcycle) "offset:0x%04"PRIx64" value:0x%03x width:%d wcycle:%u" pflash_timer_expired(uint8_t cmd) "command 0x%02x done" +pflash_io_read(uint64_t offset, int width, int fmt_width, uint32_t value, uint8_t cmd, uint8_t wcycle) "offset:0x%04"PRIx64" width:%d value:0x%0*x cmd:0x%02x wcycle:%u" +pflash_io_write(uint64_t offset, int width, int fmt_width, uint32_t value, uint8_t wcycle) "offset:0x%04"PRIx64" width:%d value:0x%0*x wcycle:%u" pflash_data_read8(uint64_t offset, uint32_t value) "data offset:0x%04"PRIx64" value:0x%02x" pflash_data_read16(uint64_t offset, uint32_t value) "data offset:0x%04"PRIx64" value:0x%04x" pflash_data_read32(uint64_t offset, uint32_t value) "data offset:0x%04"PRIx64" value:0x%08x"
Signature · 1 line
2.20.1
Re: [PATCH v5 02/28] hw/block/pflash: Simplify trace_pflash_io_read/write()
Hi Phil,
Thanks for pushing this forward! I'll try to get to the rest of these early next week.
Quoted 26 lines · Philippe Mathieu-Daudé
Call the
read()trace function after the value is set, so we can log the returned value.
Rename the I/O trace functions with '_io_' in their name.Signed-off-by Philippe Mathieu-Daudé <[email protected]>---
hw/block/pflash_cfi01.c | 5 +++-- hw/block/pflash_cfi02.c | 6 ++---- hw/block/trace-events | 4 ++-- 3 files changed, 7 insertions(+), 8 deletions(-)hw/block/pflash_cfi01.c +0
-1@@ -288,7 +288,6 @@ static uint32_t pflash_read(PFlashCFI01 *pfl, hwaddr offset,uint32_t ret; ret =-1 ; -trace_pflash_read (offset, pfl->cmd, width, pfl->wcycle);switch (pfl->cmd) {default :/* This should never happen : reset state & treat it as a read */
hw/block/pflash_cfi01.c static uint32_t pflash_read(PFlashCFI01 *pfl, hwaddr offset, · line 393
Quoted 4 lines
hw/block/pflash_cfi01.c +1
-0@@ -391,6 +390,8 @@ static uint32_t pflash_read(PFlashCFI01 *pfl, hwaddr offset,break ; } +trace_pflash_io_read (offset, width, width <<1 , ret, pfl->cmd, pfl->wcycle);
width * 2 might make it more clear what is going on.
hw/block/pflash_cfi01.c static void pflash_write(PFlashCFI01 *pfl, hwaddr offset, · line 457
Quoted 10 lines
hw/block/pflash_cfi01.c +2
-1+return ret; }@@ -453,7 +454,7 @@ static void pflash_write(PFlashCFI01 *pfl, hwaddr offset, cmd = value; -trace_pflash_write (offset, value, width, pfl->wcycle); +trace_pflash_io_write (offset, width, width <<1 , value, pfl->wcycle);
Same here.
Quoted 16 lines
hw/block/pflash_cfi01.c +0
-0if (!pfl->wcycle) {/* Set the device in I/O access mode */ memory_region_rom_device_set_romd (&pfl->mem, false);hw/block/pflash_cfi02.c +0
-1@@ -145,7 +145,6 @@ static uint32_t pflash_read(PFlashCFI02 *pfl, hwaddr offset,uint8_t *p; ret =-1 ; -trace_pflash_read (offset, pfl->cmd, width, pfl->wcycle);/* Lazy reset to ROMD mode after a certain amount of read accesses */ if (!pfl->rom_mode && pfl->wcycle ==0 && ++pfl->read_counter >PFLASH_LAZY_ROMD_THRESHOLD ) {
hw/block/pflash_cfi02.c static uint32_t pflash_read(PFlashCFI02 *pfl, hwaddr offset, · line 243
Quoted 4 lines
hw/block/pflash_cfi02.c +1
-0@@ -241,6 +240,7 @@ static uint32_t pflash_read(PFlashCFI02 *pfl, hwaddr offset, }break ; } +trace_pflash_io_read (offset, width, width <<1 , ret, pfl->cmd, pfl->wcycle);
And here.
hw/block/pflash_cfi02.c static void pflash_write(PFlashCFI02 *pfl, hwaddr offset, · line 270
Quoted 8 lines
hw/block/pflash_cfi02.c +1
-0return ret; }@@ -267,6 +267,7 @@ static void pflash_write(PFlashCFI02 *pfl, hwaddr offset,uint8_t *p;uint8_t cmd; +trace_pflash_io_write (offset, width, width <<1 , value, pfl->wcycle);
And here.
Quoted 28 lines
hw/block/pflash_cfi02.c +0
-3cmd = value;if (pfl->cmd !=0xA0 && cmd ==0xF0 ) {#if 0 @@ -275,11 +276,8 @@ static void pflash_write(PFlashCFI02 *pfl, hwaddr offset,#endif goto reset_flash; } -trace_pflash_write (offset, value, width, pfl->wcycle); offset &= pfl->chip_len -1 ; -DPRINTF ("%s: offset " TARGET_FMT_plx" %08x %d\n" , __func__, - offset, value, width); boff = offset & (pfl->sector_len -1 );if (pfl->width ==2 ) boff = boff >>1 ;hw/block/trace-events +0
-0@@ -7,9 +7,9 @@ fdc_ioport_write(uint8_t reg, uint8_t value) "write reg 0x%02x val 0x%02x" # pflash_cfi02.c # pflash_cfi01.c
pflash_reset(void)"reset"hw/block/trace-events +0
-2-pflash_read(uint64_t offset, uint8_t cmd, int width, uint8_t wcycle) "offset:0x%04"PRIx64" cmd:0x%02x width:%d wcycle:%u" -pflash_write(uint64_t offset, uint32_t value, int width, uint8_t wcycle) "offset:0x%04"PRIx64" value:0x%03x width:%d wcycle:%u"
pflash_timer_expired(uint8_t cmd)"command 0x%02x done"hw/block/trace-events +2
-0+pflash_io_read(uint64_t offset, int width, int fmt_width, uint32_t value, uint8_t cmd, uint8_t wcycle) "offset:0x%04"PRIx64" width:%d value:0x%0*x cmd:0x%02x wcycle:%u" +pflash_io_write(uint64_t offset, int width, int fmt_width, uint32_t value, uint8_t wcycle) "offset:0x%04"PRIx64" width:%d value:0x%0*x wcycle:%u"
Quoted 6 lines
pflash_data_read8(uint64_t offset, uint32_t value)"data offset:0x%04"PRIx64" value:0x%02x"pflash_data_read16(uint64_t offset, uint32_t value)"data offset:0x%04"PRIx64" value:0x%04x"pflash_data_read32(uint64_t offset, uint32_t value)"data offset:0x%04"PRIx64" value:0x%08x"Signature · 1 line
2.20.1
Either way,
(And please let me know if I'm doing code review incorrectly or if that should be Reviewed-by or whatever.)
Cheers,
Steve
Signature · 1 line
Stephen Checkoway
Re: [Qemu-devel] [PATCH v5 02/28] hw/block/pflash: Simplify trace_pflash_io_read/write()
Quoted 122 lines · Stephen Checkoway
Hi Phil,
Thanks for pushing this forward! I'll try to get to the rest of these early next week.
Quoted 26 lines · Philippe Mathieu-Daudé
Call the
read()trace function after the value is set, so we can log the returned value.
Rename the I/O trace functions with '_io_' in their name.Signed-off-by Philippe Mathieu-Daudé <[email protected]>---
hw/block/pflash_cfi01.c | 5 +++-- hw/block/pflash_cfi02.c | 6 ++---- hw/block/trace-events | 4 ++-- 3 files changed, 7 insertions(+), 8 deletions(-)hw/block/pflash_cfi01.c +0
-1@@ -288,7 +288,6 @@ static uint32_t pflash_read(PFlashCFI01 *pfl, hwaddr offset,uint32_t ret; ret =-1 ; -trace_pflash_read (offset, pfl->cmd, width, pfl->wcycle);switch (pfl->cmd) {default :/* This should never happen : reset state & treat it as a read */ hw/block/pflash_cfi01.c static uint32_t pflash_read(PFlashCFI01 *pfl, hwaddr offset, · line 393
Quoted 4 lines
hw/block/pflash_cfi01.c +1
-0@@ -391,6 +390,8 @@ static uint32_t pflash_read(PFlashCFI01 *pfl, hwaddr offset,break ; } +trace_pflash_io_read (offset, width, width <<1 , ret, pfl->cmd, pfl->wcycle);width * 2 might make it more clear what is going on.
hw/block/pflash_cfi01.c static void pflash_write(PFlashCFI01 *pfl, hwaddr offset, · line 457
Quoted 10 lines
hw/block/pflash_cfi01.c +2
-1+return ret; }@@ -453,7 +454,7 @@ static void pflash_write(PFlashCFI01 *pfl, hwaddr offset, cmd = value; -trace_pflash_write (offset, value, width, pfl->wcycle); +trace_pflash_io_write (offset, width, width <<1 , value, pfl->wcycle);Same here.
Quoted 16 lines
hw/block/pflash_cfi01.c +0
-0if (!pfl->wcycle) {/* Set the device in I/O access mode */ memory_region_rom_device_set_romd (&pfl->mem, false);hw/block/pflash_cfi02.c +0
-1@@ -145,7 +145,6 @@ static uint32_t pflash_read(PFlashCFI02 *pfl, hwaddr offset,uint8_t *p; ret =-1 ; -trace_pflash_read (offset, pfl->cmd, width, pfl->wcycle);/* Lazy reset to ROMD mode after a certain amount of read accesses */ if (!pfl->rom_mode && pfl->wcycle ==0 && ++pfl->read_counter >PFLASH_LAZY_ROMD_THRESHOLD ) {hw/block/pflash_cfi02.c static uint32_t pflash_read(PFlashCFI02 *pfl, hwaddr offset, · line 243
Quoted 4 lines
hw/block/pflash_cfi02.c +1
-0@@ -241,6 +240,7 @@ static uint32_t pflash_read(PFlashCFI02 *pfl, hwaddr offset, }break ; } +trace_pflash_io_read (offset, width, width <<1 , ret, pfl->cmd, pfl->wcycle);And here.
hw/block/pflash_cfi02.c static void pflash_write(PFlashCFI02 *pfl, hwaddr offset, · line 270
Quoted 8 lines
hw/block/pflash_cfi02.c +1
-0return ret; }@@ -267,6 +267,7 @@ static void pflash_write(PFlashCFI02 *pfl, hwaddr offset,uint8_t *p;uint8_t cmd; +trace_pflash_io_write (offset, width, width <<1 , value, pfl->wcycle);And here.
Quoted 28 lines
hw/block/pflash_cfi02.c +0
-3cmd = value;if (pfl->cmd !=0xA0 && cmd ==0xF0 ) {#if 0 @@ -275,11 +276,8 @@ static void pflash_write(PFlashCFI02 *pfl, hwaddr offset,#endif goto reset_flash; } -trace_pflash_write (offset, value, width, pfl->wcycle); offset &= pfl->chip_len -1 ; -DPRINTF ("%s: offset " TARGET_FMT_plx" %08x %d\n" , __func__, - offset, value, width); boff = offset & (pfl->sector_len -1 );if (pfl->width ==2 ) boff = boff >>1 ;hw/block/trace-events +0
-0@@ -7,9 +7,9 @@ fdc_ioport_write(uint8_t reg, uint8_t value) "write reg 0x%02x val 0x%02x" # pflash_cfi02.c # pflash_cfi01.c
pflash_reset(void)"reset"hw/block/trace-events +0
-2-pflash_read(uint64_t offset, uint8_t cmd, int width, uint8_t wcycle) "offset:0x%04"PRIx64" cmd:0x%02x width:%d wcycle:%u" -pflash_write(uint64_t offset, uint32_t value, int width, uint8_t wcycle) "offset:0x%04"PRIx64" value:0x%03x width:%d wcycle:%u"
pflash_timer_expired(uint8_t cmd)"command 0x%02x done"hw/block/trace-events +2
-0+pflash_io_read(uint64_t offset, int width, int fmt_width, uint32_t value, uint8_t cmd, uint8_t wcycle) "offset:0x%04"PRIx64" width:%d value:0x%0*x cmd:0x%02x wcycle:%u" +pflash_io_write(uint64_t offset, int width, int fmt_width, uint32_t value, uint8_t wcycle) "offset:0x%04"PRIx64" width:%d value:0x%0*x wcycle:%u"Quoted 6 lines
pflash_data_read8(uint64_t offset, uint32_t value)"data offset:0x%04"PRIx64" value:0x%02x"pflash_data_read16(uint64_t offset, uint32_t value)"data offset:0x%04"PRIx64" value:0x%04x"pflash_data_read32(uint64_t offset, uint32_t value)"data offset:0x%04"PRIx64" value:0x%08x" --
2.20.1Either way,
Quoted 3 lines
Signed-off-by Stephen Checkoway <[email protected]>(And please let me know if I'm doing code review incorrectly or if that should be Reviewed-by or whatever.)
For code review it should be Reviewed-by (or Acked-by if you are less sure).
Alistair
Quoted 13 lines
Cheers,
Steve
--
Stephen Checkoway
Re: [Qemu-devel] [PATCH v5 02/28] hw/block/pflash: Simplify trace_pflash_io_read/write()
In reply to Philippe Mathieu-DaudéQuoted 6 lines · Philippe Mathieu-Daudé
Call the
read()trace function after the value is set, so we can log the returned value.
Rename the I/O trace functions with '_io_' in their name.Signed-off-by Philippe Mathieu-Daudé <[email protected]>
Alistair
Quoted 96 lines
--- hw/block/pflash_cfi01.c | 5 +++-- hw/block/pflash_cfi02.c | 6 ++---- hw/block/trace-events | 4 ++-- 3 files changed, 7 insertions(+), 8 deletions(-)hw/block/pflash_cfi01.c +3
-2@@ -288,7 +288,6 @@ static uint32_t pflash_read(PFlashCFI01 *pfl, hwaddr offset,uint32_t ret; ret =-1 ; -trace_pflash_read (offset, pfl->cmd, width, pfl->wcycle);switch (pfl->cmd) {default :/* This should never happen : reset state & treat it as a read */ @@ -391,6 +390,8 @@ static uint32_t pflash_read(PFlashCFI01 *pfl, hwaddr offset,break ; } +trace_pflash_io_read (offset, width, width <<1 , ret, pfl->cmd, pfl->wcycle); +return ret; }@@ -453,7 +454,7 @@ static void pflash_write(PFlashCFI01 *pfl, hwaddr offset, cmd = value; -trace_pflash_write (offset, value, width, pfl->wcycle); +trace_pflash_io_write (offset, width, width <<1 , value, pfl->wcycle);if (!pfl->wcycle) {/* Set the device in I/O access mode */ memory_region_rom_device_set_romd (&pfl->mem, false);hw/block/pflash_cfi02.c +2
-4@@ -145,7 +145,6 @@ static uint32_t pflash_read(PFlashCFI02 *pfl, hwaddr offset,uint8_t *p; ret =-1 ; -trace_pflash_read (offset, pfl->cmd, width, pfl->wcycle);/* Lazy reset to ROMD mode after a certain amount of read accesses */ if (!pfl->rom_mode && pfl->wcycle ==0 && ++pfl->read_counter >PFLASH_LAZY_ROMD_THRESHOLD ) {@@ -241,6 +240,7 @@ static uint32_t pflash_read(PFlashCFI02 *pfl, hwaddr offset, }break ; } +trace_pflash_io_read (offset, width, width <<1 , ret, pfl->cmd, pfl->wcycle);return ret; }@@ -267,6 +267,7 @@ static void pflash_write(PFlashCFI02 *pfl, hwaddr offset,uint8_t *p;uint8_t cmd; +trace_pflash_io_write (offset, width, width <<1 , value, pfl->wcycle); cmd = value;if (pfl->cmd !=0xA0 && cmd ==0xF0 ) {#if 0 @@ -275,11 +276,8 @@ static void pflash_write(PFlashCFI02 *pfl, hwaddr offset,#endif goto reset_flash; } -trace_pflash_write (offset, value, width, pfl->wcycle); offset &= pfl->chip_len -1 ; -DPRINTF ("%s: offset " TARGET_FMT_plx" %08x %d\n" , __func__, - offset, value, width); boff = offset & (pfl->sector_len -1 );if (pfl->width ==2 ) boff = boff >>1 ;hw/block/trace-events +2
-3@@ -7,9 +7,9 @@ fdc_ioport_write(uint8_t reg, uint8_t value) "write reg 0x%02x val 0x%02x" # pflash_cfi02.c # pflash_cfi01.c pflash_reset(void) "reset" -pflash_read(uint64_t offset, uint8_t cmd, int width, uint8_t wcycle) "offset:0x%04"PRIx64" cmd:0x%02x width:%d wcycle:%u" -pflash_write(uint64_t offset, uint32_t value, int width, uint8_t wcycle) "offset:0x%04"PRIx64" value:0x%03x width:%d wcycle:%u" pflash_timer_expired(uint8_t cmd) "command 0x%02x done" +pflash_io_read(uint64_t offset, int width, int fmt_width, uint32_t value, uint8_t cmd, uint8_t wcycle) "offset:0x%04"PRIx64" width:%d value:0x%0*x cmd:0x%02x wcycle:%u" +pflash_io_write(uint64_t offset, int width, int fmt_width, uint32_t value, uint8_t wcycle) "offset:0x%04"PRIx64" width:%d value:0x%0*x wcycle:%u" pflash_data_read8(uint64_t offset, uint32_t value) "data offset:0x%04"PRIx64" value:0x%02x" pflash_data_read16(uint64_t offset, uint32_t value) "data offset:0x%04"PRIx64" value:0x%04x" pflash_data_read32(uint64_t offset, uint32_t value) "data offset:0x%04"PRIx64" value:0x%08x" --2.20.1
PATCH v5 3/28 hw/block/pflash: Simplify trace_pflash_data_read/write()
In reply to Philippe Mathieu-DaudéUse a field width format to have a single function to log the different width accesses.
--- hw/block/pflash_cfi01.c | 6 ++---- hw/block/pflash_cfi02.c | 6 ++---- hw/block/trace-events | 6 ++---- 3 files changed, 6 insertions(+), 12 deletions(-)
hw/block/pflash_cfi01.c +2 -4
@@ -248,7 +248,6 @@ static uint32_t pflash_data_read(PFlashCFI01 *pfl, hwaddr offset,switch (width) {case 1 : ret = p[offset]; -trace_pflash_data_read8 (offset, ret);break ;case 2 :if (be) {
@@ -258,7 +257,6 @@ static uint32_t pflash_data_read(PFlashCFI01 *pfl, hwaddr offset, ret = p[offset]; ret |= p[offset +1 ] <<8 ; } -trace_pflash_data_read16 (offset, ret);break ;case 4 :if (be) {
@@ -272,12 +270,12 @@ static uint32_t pflash_data_read(PFlashCFI01 *pfl, hwaddr offset, ret |= p[offset +2 ] <<16 ; ret |= p[offset +3 ] <<24 ; } -trace_pflash_data_read32 (offset, ret);break ;default :DPRINTF ("BUG in %s\n" , __func__);abort (); } +trace_pflash_data_read (offset, width <<1 , ret);return ret; }
@@ -415,7 +413,7 @@ static inline void pflash_data_write(PFlashCFI01 *pfl, hwaddr offset, {uint8_t *p = pfl->storage; -trace_pflash_data_write (offset, value, width, pfl->counter); +trace_pflash_data_write (offset, width <<1 , value, pfl->counter);switch (width) {case 1 : p[offset] = value;
hw/block/pflash_cfi02.c +2 -4
@@ -172,7 +172,6 @@ static uint32_t pflash_read(PFlashCFI02 *pfl, hwaddr offset,switch (width) {case 1 : ret = p[offset]; -trace_pflash_data_read8 (offset, ret);break ;case 2 :if (be) {
@@ -182,7 +181,6 @@ static uint32_t pflash_read(PFlashCFI02 *pfl, hwaddr offset, ret = p[offset]; ret |= p[offset +1 ] <<8 ; } -trace_pflash_data_read16 (offset, ret);break ;case 4 :if (be) {
@@ -196,9 +194,9 @@ static uint32_t pflash_read(PFlashCFI02 *pfl, hwaddr offset, ret |= p[offset +2 ] <<16 ; ret |= p[offset +3 ] <<24 ; } -trace_pflash_data_read32 (offset, ret);break ; } +trace_pflash_data_read (offset, width <<1 , ret);break ;case 0x90 :/* flash ID read */
@@ -343,7 +341,7 @@ static void pflash_write(PFlashCFI02 *pfl, hwaddr offset,/* We need another unlock sequence */ goto check_unlock0;case 0xA0 : -trace_pflash_data_write (offset, value, width,0 ); +trace_pflash_data_write (offset, width <<1 , value,0 ); p = pfl->storage;if (!pfl->ro) {switch (width) {
hw/block/trace-events +2 -4
@@ -10,10 +10,8 @@ pflash_reset(void) "reset" pflash_timer_expired(uint8_t cmd) "command 0x%02x done" pflash_io_read(uint64_t offset, int width, int fmt_width, uint32_t value, uint8_t cmd, uint8_t wcycle) "offset:0x%04"PRIx64" width:%d value:0x%0*x cmd:0x%02x wcycle:%u" pflash_io_write(uint64_t offset, int width, int fmt_width, uint32_t value, uint8_t wcycle) "offset:0x%04"PRIx64" width:%d value:0x%0*x wcycle:%u" -pflash_data_read8(uint64_t offset, uint32_t value) "data offset:0x%04"PRIx64" value:0x%02x" -pflash_data_read16(uint64_t offset, uint32_t value) "data offset:0x%04"PRIx64" value:0x%04x" -pflash_data_read32(uint64_t offset, uint32_t value) "data offset:0x%04"PRIx64" value:0x%08x" -pflash_data_write(uint64_t offset, uint32_t value, int width, uint64_t counter) "data offset:0x%04"PRIx64" value:0x%08x width:%d counter:0x%016"PRIx64 +pflash_data_read(uint64_t offset, int width, uint32_t value) "data offset:0x%04"PRIx64" value:0x%0*x" +pflash_data_write(uint64_t offset, int width, uint32_t value, uint64_t counter) "data offset:0x%04"PRIx64" value:0x%0*x counter:0x%016"PRIx64 pflash_manufacturer_id(uint16_t id) "Read Manufacturer ID: 0x%04x" pflash_device_id(uint16_t id) "Read Device ID: 0x%04x" pflash_device_info(uint64_t offset) "Read Device Information offset:0x%04"PRIx64
Signature · 1 line
2.20.1
Re: [Qemu-devel] [PATCH v5 03/28] hw/block/pflash: Simplify trace_pflash_data_read/write()
Quoted 5 lines · Philippe Mathieu-Daudé
Use a field width format to have a single function to log the different width accesses.
Signed-off-by Philippe Mathieu-Daudé <[email protected]>
Alistair
Quoted 110 lines
--- hw/block/pflash_cfi01.c | 6 ++---- hw/block/pflash_cfi02.c | 6 ++---- hw/block/trace-events | 6 ++---- 3 files changed, 6 insertions(+), 12 deletions(-)hw/block/pflash_cfi01.c +2
-4@@ -248,7 +248,6 @@ static uint32_t pflash_data_read(PFlashCFI01 *pfl, hwaddr offset,switch (width) {case 1 : ret = p[offset]; -trace_pflash_data_read8 (offset, ret);break ;case 2 :if (be) {@@ -258,7 +257,6 @@ static uint32_t pflash_data_read(PFlashCFI01 *pfl, hwaddr offset, ret = p[offset]; ret |= p[offset +1 ] <<8 ; } -trace_pflash_data_read16 (offset, ret);break ;case 4 :if (be) {@@ -272,12 +270,12 @@ static uint32_t pflash_data_read(PFlashCFI01 *pfl, hwaddr offset, ret |= p[offset +2 ] <<16 ; ret |= p[offset +3 ] <<24 ; } -trace_pflash_data_read32 (offset, ret);break ;default :DPRINTF ("BUG in %s\n" , __func__);abort (); } +trace_pflash_data_read (offset, width <<1 , ret);return ret; }@@ -415,7 +413,7 @@ static inline void pflash_data_write(PFlashCFI01 *pfl, hwaddr offset, {uint8_t *p = pfl->storage; -trace_pflash_data_write (offset, value, width, pfl->counter); +trace_pflash_data_write (offset, width <<1 , value, pfl->counter);switch (width) {case 1 : p[offset] = value;hw/block/pflash_cfi02.c +2
-4@@ -172,7 +172,6 @@ static uint32_t pflash_read(PFlashCFI02 *pfl, hwaddr offset,switch (width) {case 1 : ret = p[offset]; -trace_pflash_data_read8 (offset, ret);break ;case 2 :if (be) {@@ -182,7 +181,6 @@ static uint32_t pflash_read(PFlashCFI02 *pfl, hwaddr offset, ret = p[offset]; ret |= p[offset +1 ] <<8 ; } -trace_pflash_data_read16 (offset, ret);break ;case 4 :if (be) {@@ -196,9 +194,9 @@ static uint32_t pflash_read(PFlashCFI02 *pfl, hwaddr offset, ret |= p[offset +2 ] <<16 ; ret |= p[offset +3 ] <<24 ; } -trace_pflash_data_read32 (offset, ret);break ; } +trace_pflash_data_read (offset, width <<1 , ret);break ;case 0x90 :/* flash ID read */ @@ -343,7 +341,7 @@ static void pflash_write(PFlashCFI02 *pfl, hwaddr offset,/* We need another unlock sequence */ goto check_unlock0;case 0xA0 : -trace_pflash_data_write (offset, value, width,0 ); +trace_pflash_data_write (offset, width <<1 , value,0 ); p = pfl->storage;if (!pfl->ro) {switch (width) {hw/block/trace-events +2
-5@@ -10,10 +10,8 @@ pflash_reset(void) "reset" pflash_timer_expired(uint8_t cmd) "command 0x%02x done" pflash_io_read(uint64_t offset, int width, int fmt_width, uint32_t value, uint8_t cmd, uint8_t wcycle) "offset:0x%04"PRIx64" width:%d value:0x%0*x cmd:0x%02x wcycle:%u" pflash_io_write(uint64_t offset, int width, int fmt_width, uint32_t value, uint8_t wcycle) "offset:0x%04"PRIx64" width:%d value:0x%0*x wcycle:%u" -pflash_data_read8(uint64_t offset, uint32_t value) "data offset:0x%04"PRIx64" value:0x%02x" -pflash_data_read16(uint64_t offset, uint32_t value) "data offset:0x%04"PRIx64" value:0x%04x" -pflash_data_read32(uint64_t offset, uint32_t value) "data offset:0x%04"PRIx64" value:0x%08x" -pflash_data_write(uint64_t offset, uint32_t value, int width, uint64_t counter) "data offset:0x%04"PRIx64" value:0x%08x width:%d counter:0x%016"PRIx64 +pflash_data_read(uint64_t offset, int width, uint32_t value) "data offset:0x%04"PRIx64" value:0x%0*x" +pflash_data_write(uint64_t offset, int width, uint32_t value, uint64_t counter) "data offset:0x%04"PRIx64" value:0x%0*x counter:0x%016"PRIx64 pflash_manufacturer_id(uint16_t id) "Read Manufacturer ID: 0x%04x" pflash_device_id(uint16_t id) "Read Device ID: 0x%04x" pflash_device_info(uint64_t offset) "Read Device Information offset:0x%04"PRIx64 --2.20.1
PATCH v5 4/28 hw/block/pflash_cfi02: Fix debug format string
In reply to Philippe Mathieu-DaudéAlways compile the debug code to prevent format string to bitrot. Delete dead code.
Message-Id: <[email protected]>
--- hw/block/pflash_cfi02.c | 18 ++++++------------ 1 file changed, 6 insertions(+), 12 deletions(-)
hw/block/pflash_cfi02.c +6 -12
@@ -47,15 +47,13 @@#include "hw/sysbus.h" #include "trace.h" -//#define PFLASH_DEBUG -#ifdef PFLASH_DEBUG +#define PFLASH_DEBUG false#define DPRINTF (fmt, ...) \ do { \ - fprintf(stderr, "PFLASH: " fmt , ## __VA_ARGS__); \ + if (PFLASH_DEBUG) { \ + fprintf(stderr, "PFLASH: " fmt, ## __VA_ARGS__); \ + } \ } while (0) -#else -#define DPRINTF (fmt, ...) do { } while (0) -#endif #define PFLASH_LAZY_ROMD_THRESHOLD 42
@@ -218,14 +216,14 @@ static uint32_t pflash_read(PFlashCFI02 *pfl, hwaddr offset,default : goto flash_read; } -DPRINTF ("%s: ID " TARGET_FMT_plx" %x\n" , __func__, boff, ret); +DPRINTF ("%s: ID " TARGET_FMT_plx" %" PRIx32"\n" , __func__, boff, ret);break ;case 0xA0 :case 0x10 :case 0x30 :/* Status register read */ ret = pfl->status; -DPRINTF ("%s: status %x\n" , __func__, ret); +DPRINTF ("%s: status %" PRIx32"\n" , __func__, ret);/* Toggle bit 6 */ pfl->status ^=0x40 ;break ;
@@ -268,10 +266,6 @@ static void pflash_write(PFlashCFI02 *pfl, hwaddr offset,trace_pflash_io_write (offset, width, width <<1 , value, pfl->wcycle); cmd = value;if (pfl->cmd !=0xA0 && cmd ==0xF0 ) { -#if 0 -DPRINTF ("%s: flash reset asked (%02x %02x)\n" , - __func__, pfl->cmd, cmd); -#endif goto reset_flash; } offset &= pfl->chip_len -1 ;
Signature · 1 line
2.20.1
Re: [Qemu-devel] [PATCH v5 04/28] hw/block/pflash_cfi02: Fix debug format string
Quoted 10 lines · Philippe Mathieu-Daudé
Always compile the debug code to prevent format string to bitrot. Delete dead code.
Signed-off-by Stephen Checkoway <[email protected]>Message-Id: <[email protected]>
Reviewed-by Philippe Mathieu-Daudé <[email protected]>[PMD: Extracted from bigger patch, use PRIx32]Signed-off-by Philippe Mathieu-Daudé <[email protected]>
Alistair
Quoted 60 lines
--- hw/block/pflash_cfi02.c | 18 ++++++------------ 1 file changed, 6 insertions(+), 12 deletions(-)hw/block/pflash_cfi02.c +6
-13@@ -47,15 +47,13 @@#include "hw/sysbus.h" #include "trace.h" -//#define PFLASH_DEBUG -#ifdef PFLASH_DEBUG +#define PFLASH_DEBUG false#define DPRINTF (fmt, ...) \ do { \ - fprintf(stderr, "PFLASH: " fmt , ## __VA_ARGS__); \ + if (PFLASH_DEBUG) { \ + fprintf(stderr, "PFLASH: " fmt, ## __VA_ARGS__); \ + } \ } while (0) -#else -#define DPRINTF (fmt, ...) do { } while (0) -#endif #define PFLASH_LAZY_ROMD_THRESHOLD 42@@ -218,14 +216,14 @@ static uint32_t pflash_read(PFlashCFI02 *pfl, hwaddr offset,default : goto flash_read; } -DPRINTF ("%s: ID " TARGET_FMT_plx" %x\n" , __func__, boff, ret); +DPRINTF ("%s: ID " TARGET_FMT_plx" %" PRIx32"\n" , __func__, boff, ret);break ;case 0xA0 :case 0x10 :case 0x30 :/* Status register read */ ret = pfl->status; -DPRINTF ("%s: status %x\n" , __func__, ret); +DPRINTF ("%s: status %" PRIx32"\n" , __func__, ret);/* Toggle bit 6 */ pfl->status ^=0x40 ;break ;@@ -268,10 +266,6 @@ static void pflash_write(PFlashCFI02 *pfl, hwaddr offset,trace_pflash_io_write (offset, width, width <<1 , value, pfl->wcycle); cmd = value;if (pfl->cmd !=0xA0 && cmd ==0xF0 ) { -#if 0 -DPRINTF ("%s: flash reset asked (%02x %02x)\n" , - __func__, pfl->cmd, cmd); -#endif goto reset_flash; } offset &= pfl->chip_len -1 ; --2.20.1
PATCH v5 5/28 hw/block/pflash_cfi02: Add an enum to define the write cycles
In reply to Philippe Mathieu-DaudéNo change in functionality is intended with this commit.
Message-Id: <[email protected]>
--- hw/block/pflash_cfi02.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-)
hw/block/pflash_cfi02.c +8 -2
@@ -57,6 +57,11 @@ do { \#define PFLASH_LAZY_ROMD_THRESHOLD 42 +/* Special write cycles for CFI queries. */ +enum { +WCYCLE_CFI =7 , +}; +struct PFlashCFI02 {/*< private >*/ SysBusDevice parent_obj;
@@ -286,7 +291,7 @@ static void pflash_write(PFlashCFI02 *pfl, hwaddr offset,if (boff ==0x55 && cmd ==0x98 ) { enter_CFI_mode:/* Enter CFI query mode */ - pfl->wcycle =7 ; + pfl->wcycle =WCYCLE_CFI ; pfl->cmd =0x98 ;return ; }
@@ -458,7 +463,8 @@ static void pflash_write(PFlashCFI02 *pfl, hwaddr offset, goto reset_flash; }break ; -case 7 :/* Special value for CFI queries */ +/* Special values for CFI queries */ +case WCYCLE_CFI :DPRINTF ("%s: invalid write in CFI query mode\n" , __func__); goto reset_flash;default :
Signature · 1 line
2.20.1
Re: [Qemu-devel] [PATCH v5 05/28] hw/block/pflash_cfi02: Add an enum to define the write cycles
Quoted 9 lines · Philippe Mathieu-Daudé
No change in functionality is intended with this commit.
Signed-off-by Stephen Checkoway <[email protected]>Message-Id: <[email protected]>
Reviewed-by Philippe Mathieu-Daudé <[email protected]>[PMD: Extracted from bigger patch]Signed-off-by Philippe Mathieu-Daudé <[email protected]>
Alistair
Quoted 43 lines
--- hw/block/pflash_cfi02.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-)hw/block/pflash_cfi02.c +8
-3@@ -57,6 +57,11 @@ do { \#define PFLASH_LAZY_ROMD_THRESHOLD 42 +/* Special write cycles for CFI queries. */ +enum { +WCYCLE_CFI =7 , +}; +struct PFlashCFI02 {/*< private >*/ SysBusDevice parent_obj;@@ -286,7 +291,7 @@ static void pflash_write(PFlashCFI02 *pfl, hwaddr offset,if (boff ==0x55 && cmd ==0x98 ) { enter_CFI_mode:/* Enter CFI query mode */ - pfl->wcycle =7 ; + pfl->wcycle =WCYCLE_CFI ; pfl->cmd =0x98 ;return ; }@@ -458,7 +463,8 @@ static void pflash_write(PFlashCFI02 *pfl, hwaddr offset, goto reset_flash; }break ; -case 7 :/* Special value for CFI queries */ +/* Special values for CFI queries */ +case WCYCLE_CFI :DPRINTF ("%s: invalid write in CFI query mode\n" , __func__); goto reset_flash;default : --2.20.1
PATCH v5 6/28 hw/block/pflash_cfi02: Add helpers to manipulate the status bits
In reply to Philippe Mathieu-DaudéPull out all of the code to modify the status into simple helper functions. Status handling becomes more complex once multiple chips are interleaved to produce a single device.
No change in functionality is intended with this commit.
Message-Id: <[email protected]>
--- hw/block/pflash_cfi02.c | 40 ++++++++++++++++++++++++++++++++++------ 1 file changed, 34 insertions(+), 6 deletions(-)
hw/block/pflash_cfi02.c +34 -6
@@ -101,6 +101,31 @@ struct PFlashCFI02 {void *storage; }; +/* +* Toggle status bit DQ7. +*/ +static inline void toggle_dq7 (PFlashCFI02 *pfl) +{ + pfl->status ^=0x80 ; +} + +/* +* Set status bit DQ7 to bit 7 of value. +*/ +static inline void set_dq7 (PFlashCFI02 *pfl,uint8_t value) +{ + pfl->status &=0x7F ; + pfl->status |= value &0x80 ; +} + +/* +* Toggle status bit DQ6. +*/ +static inline void toggle_dq6 (PFlashCFI02 *pfl) +{ + pfl->status ^=0x40 ; +} +/* * Set up replicated mappings of the same region. */
@@ -130,7 +155,7 @@ static void pflash_timer (void *opaque)trace_pflash_timer_expired (pfl->cmd);/* Reset flash */ - pfl->status ^=0x80 ; +toggle_dq7 (pfl);if (pfl->bypass) { pfl->wcycle =2 ; }else {
@@ -229,8 +254,7 @@ static uint32_t pflash_read(PFlashCFI02 *pfl, hwaddr offset,/* Status register read */ ret = pfl->status;DPRINTF ("%s: status %" PRIx32"\n" , __func__, ret); -/* Toggle bit 6 */ - pfl->status ^=0x40 ; +toggle_dq6 (pfl);break ;case 0x98 :/* CFI query mode */
@@ -374,7 +398,11 @@ static void pflash_write(PFlashCFI02 *pfl, hwaddr offset,break ; } } - pfl->status =0x00 | ~(value &0x80 ); +/* +* While programming, status bit DQ7 should hold the opposite +* value from how it was programmed. +*/ +set_dq7 (pfl, ~value);/* Let's pretend write is immediate */ if (pfl->bypass) goto do_bypass;
@@ -422,7 +450,7 @@ static void pflash_write(PFlashCFI02 *pfl, hwaddr offset,memset (pfl->storage,0xFF , pfl->chip_len);pflash_update (pfl,0 , pfl->chip_len); } - pfl->status =0x00 ; +set_dq7 (pfl,0x00 );/* Let's wait 5 seconds before chip erase is done */ timer_mod (&pfl->timer,qemu_clock_get_ns (QEMU_CLOCK_VIRTUAL ) + (NANOSECONDS_PER_SECOND *5 ));
@@ -437,7 +465,7 @@ static void pflash_write(PFlashCFI02 *pfl, hwaddr offset,memset (p + offset,0xFF , pfl->sector_len);pflash_update (pfl, offset, pfl->sector_len); } - pfl->status =0x00 ; +set_dq7 (pfl,0x00 );/* Let's wait 1/2 second before sector erase is done */ timer_mod (&pfl->timer,qemu_clock_get_ns (QEMU_CLOCK_VIRTUAL ) + (NANOSECONDS_PER_SECOND /2 ));
Signature · 1 line
2.20.1
Re: [Qemu-devel] [PATCH v5 06/28] hw/block/pflash_cfi02: Add helpers to manipulate the status bits
Quoted 5 lines · Philippe Mathieu-Daudé
Pull out all of the code to modify the status into simple helper functions. Status handling becomes more complex once multiple chips are interleaved to produce a single device.
Quoted 8 lines
No change in functionality is intended with this commit.
Signed-off-by Stephen Checkoway <[email protected]>Message-Id: <[email protected]>
Reviewed-by Philippe Mathieu-Daudé <[email protected]>[PMD: Extracted from bigger patch]Signed-off-by Philippe Mathieu-Daudé <[email protected]>
Alistair
Quoted 94 lines
--- hw/block/pflash_cfi02.c | 40 ++++++++++++++++++++++++++++++++++------ 1 file changed, 34 insertions(+), 6 deletions(-)hw/block/pflash_cfi02.c +34
-7@@ -101,6 +101,31 @@ struct PFlashCFI02 {void *storage; }; +/* +* Toggle status bit DQ7. +*/ +static inline void toggle_dq7 (PFlashCFI02 *pfl) +{ + pfl->status ^=0x80 ; +} + +/* +* Set status bit DQ7 to bit 7 of value. +*/ +static inline void set_dq7 (PFlashCFI02 *pfl,uint8_t value) +{ + pfl->status &=0x7F ; + pfl->status |= value &0x80 ; +} + +/* +* Toggle status bit DQ6. +*/ +static inline void toggle_dq6 (PFlashCFI02 *pfl) +{ + pfl->status ^=0x40 ; +} +/* * Set up replicated mappings of the same region. */ @@ -130,7 +155,7 @@ static void pflash_timer (void *opaque)trace_pflash_timer_expired (pfl->cmd);/* Reset flash */ - pfl->status ^=0x80 ; +toggle_dq7 (pfl);if (pfl->bypass) { pfl->wcycle =2 ; }else {@@ -229,8 +254,7 @@ static uint32_t pflash_read(PFlashCFI02 *pfl, hwaddr offset,/* Status register read */ ret = pfl->status;DPRINTF ("%s: status %" PRIx32"\n" , __func__, ret); -/* Toggle bit 6 */ - pfl->status ^=0x40 ; +toggle_dq6 (pfl);break ;case 0x98 :/* CFI query mode */ @@ -374,7 +398,11 @@ static void pflash_write(PFlashCFI02 *pfl, hwaddr offset,break ; } } - pfl->status =0x00 | ~(value &0x80 ); +/* +* While programming, status bit DQ7 should hold the opposite +* value from how it was programmed. +*/ +set_dq7 (pfl, ~value);/* Let's pretend write is immediate */ if (pfl->bypass) goto do_bypass;@@ -422,7 +450,7 @@ static void pflash_write(PFlashCFI02 *pfl, hwaddr offset,memset (pfl->storage,0xFF , pfl->chip_len);pflash_update (pfl,0 , pfl->chip_len); } - pfl->status =0x00 ; +set_dq7 (pfl,0x00 );/* Let's wait 5 seconds before chip erase is done */ timer_mod (&pfl->timer,qemu_clock_get_ns (QEMU_CLOCK_VIRTUAL ) + (NANOSECONDS_PER_SECOND *5 ));@@ -437,7 +465,7 @@ static void pflash_write(PFlashCFI02 *pfl, hwaddr offset,memset (p + offset,0xFF , pfl->sector_len);pflash_update (pfl, offset, pfl->sector_len); } - pfl->status =0x00 ; +set_dq7 (pfl,0x00 );/* Let's wait 1/2 second before sector erase is done */ timer_mod (&pfl->timer,qemu_clock_get_ns (QEMU_CLOCK_VIRTUAL ) + (NANOSECONDS_PER_SECOND /2 )); --2.20.1
PATCH v5 7/28 hw/block/pflash_cfi02: Simplify a statement using fall through
In reply to Philippe Mathieu-DaudéMessage-Id: <[email protected]>
--- hw/block/pflash_cfi02.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
hw/block/pflash_cfi02.c +3 -3
@@ -239,10 +239,10 @@ static uint32_t pflash_read(PFlashCFI02 *pfl, hwaddr offset,case 0x0E :case 0x0F : ret = boff &0x01 ? pfl->ident3 : pfl->ident2; -if (ret == (uint8_t )-1 ) { - goto flash_read; +if (ret != (uint8_t )-1 ) { +break ; } -break ; +/* Fall through to data read. */ default : goto flash_read; }
Signature · 1 line
2.20.1
Re: [Qemu-devel] [PATCH v5 07/28] hw/block/pflash_cfi02: Simplify a statement using fall through
Quoted 7 lines · Philippe Mathieu-Daudé
Signed-off-by Stephen Checkoway <[email protected]>Message-Id: <[email protected]>
Reviewed-by Philippe Mathieu-Daudé <[email protected]>[PMD: Extracted from bigger patch]Signed-off-by Philippe Mathieu-Daudé <[email protected]>
Alistair
Quoted 26 lines
--- hw/block/pflash_cfi02.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)hw/block/pflash_cfi02.c +3
-4@@ -239,10 +239,10 @@ static uint32_t pflash_read(PFlashCFI02 *pfl, hwaddr offset,case 0x0E :case 0x0F : ret = boff &0x01 ? pfl->ident3 : pfl->ident2; -if (ret == (uint8_t )-1 ) { - goto flash_read; +if (ret != (uint8_t )-1 ) { +break ; } -break ; +/* Fall through to data read. */ default : goto flash_read; } --2.20.1
PATCH v5 8/28 hw/block/pflash_cfi02: Use the ldst API in pflash_write()
In reply to Philippe Mathieu-DaudéThe load/store API eases code review.
Message-Id: <[email protected]>
--- hw/block/pflash_cfi02.c | 38 ++++++++------------------------------ 1 file changed, 8 insertions(+), 30 deletions(-)
hw/block/pflash_cfi02.c +8 -30
@@ -365,38 +365,16 @@ static void pflash_write(PFlashCFI02 *pfl, hwaddr offset, goto check_unlock0;case 0xA0 :trace_pflash_data_write (offset, width <<1 , value,0 ); - p = pfl->storage;if (!pfl->ro) { -switch (width) { -case 1 : - p[offset] &= value; -pflash_update (pfl, offset,1 ); -break ; -case 2 : -if (be) { - p[offset] &= value >>8 ; - p[offset +1 ] &= value; - }else { - p[offset] &= value; - p[offset +1 ] &= value >>8 ; - } -pflash_update (pfl, offset,2 ); -break ; -case 4 : -if (be) { - p[offset] &= value >>24 ; - p[offset +1 ] &= value >>16 ; - p[offset +2 ] &= value >>8 ; - p[offset +3 ] &= value; - }else { - p[offset] &= value; - p[offset +1 ] &= value >>8 ; - p[offset +2 ] &= value >>16 ; - p[offset +3 ] &= value >>24 ; - } -pflash_update (pfl, offset,4 ); -break ; + p = (uint8_t *)pfl->storage + offset; +if (pfl->be) { +uint64_t current =ldn_be_p (p, width); +stn_be_p (p, width, current & value); + }else { +uint64_t current =ldn_le_p (p, width); +stn_le_p (p, width, current & value); } +pflash_update (pfl, offset, width); }/* * While programming, status bit DQ7 should hold the opposite
Signature · 1 line
2.20.1
Re: [Qemu-devel] [PATCH v5 08/28] hw/block/pflash_cfi02: Use the ldst API in pflash_write()
Quoted 9 lines · Philippe Mathieu-Daudé
The load/store API eases code review.
Signed-off-by Stephen Checkoway <[email protected]>Message-Id: <[email protected]>
Reviewed-by Philippe Mathieu-Daudé <[email protected]>[PMD: Extracted from bigger patch]Signed-off-by Philippe Mathieu-Daudé <[email protected]>
Alistair
Quoted 59 lines
--- hw/block/pflash_cfi02.c | 38 ++++++++------------------------------ 1 file changed, 8 insertions(+), 30 deletions(-)hw/block/pflash_cfi02.c +8
-31@@ -365,38 +365,16 @@ static void pflash_write(PFlashCFI02 *pfl, hwaddr offset, goto check_unlock0;case 0xA0 :trace_pflash_data_write (offset, width <<1 , value,0 ); - p = pfl->storage;if (!pfl->ro) { -switch (width) { -case 1 : - p[offset] &= value; -pflash_update (pfl, offset,1 ); -break ; -case 2 : -if (be) { - p[offset] &= value >>8 ; - p[offset +1 ] &= value; - }else { - p[offset] &= value; - p[offset +1 ] &= value >>8 ; - } -pflash_update (pfl, offset,2 ); -break ; -case 4 : -if (be) { - p[offset] &= value >>24 ; - p[offset +1 ] &= value >>16 ; - p[offset +2 ] &= value >>8 ; - p[offset +3 ] &= value; - }else { - p[offset] &= value; - p[offset +1 ] &= value >>8 ; - p[offset +2 ] &= value >>16 ; - p[offset +3 ] &= value >>24 ; - } -pflash_update (pfl, offset,4 ); -break ; + p = (uint8_t *)pfl->storage + offset; +if (pfl->be) { +uint64_t current =ldn_be_p (p, width); +stn_be_p (p, width, current & value); + }else { +uint64_t current =ldn_le_p (p, width); +stn_le_p (p, width, current & value); } +pflash_update (pfl, offset, width); }/* * While programming, status bit DQ7 should hold the opposite -- 2.20.1
PATCH v5 9/28 hw/block/pflash_cfi02: Use the ldst API in pflash_read()
In reply to Philippe Mathieu-DaudéThe load/store API eases code review.
Message-Id: <[email protected]>
--- hw/block/pflash_cfi02.c | 32 +++++--------------------------- 1 file changed, 5 insertions(+), 27 deletions(-)
hw/block/pflash_cfi02.c +5 -27
@@ -196,33 +196,11 @@ static uint32_t pflash_read(PFlashCFI02 *pfl, hwaddr offset,case 0x00 : flash_read:/* Flash area read */ - p = pfl->storage; -switch (width) { -case 1 : - ret = p[offset]; -break ; -case 2 : -if (be) { - ret = p[offset] <<8 ; - ret |= p[offset +1 ]; - }else { - ret = p[offset]; - ret |= p[offset +1 ] <<8 ; - } -break ; -case 4 : -if (be) { - ret = p[offset] <<24 ; - ret |= p[offset +1 ] <<16 ; - ret |= p[offset +2 ] <<8 ; - ret |= p[offset +3 ]; - }else { - ret = p[offset]; - ret |= p[offset +1 ] <<8 ; - ret |= p[offset +2 ] <<16 ; - ret |= p[offset +3 ] <<24 ; - } -break ; + p = (uint8_t *)pfl->storage + offset; +if (pfl->be) { + ret =ldn_be_p (p, width); + }else { + ret =ldn_le_p (p, width); }trace_pflash_data_read (offset, width <<1 , ret);break ;
Signature · 1 line
2.20.1
Re: [Qemu-devel] [PATCH v5 09/28] hw/block/pflash_cfi02: Use the ldst API in pflash_read()
Quoted 9 lines · Philippe Mathieu-Daudé
The load/store API eases code review.
Signed-off-by Stephen Checkoway <[email protected]>Message-Id: <[email protected]>
Reviewed-by Philippe Mathieu-Daudé <[email protected]>[PMD: Extracted from bigger patch, simplified tracing]Signed-off-by Philippe Mathieu-Daudé <[email protected]>
Alistair
Quoted 51 lines
--- hw/block/pflash_cfi02.c | 32 +++++--------------------------- 1 file changed, 5 insertions(+), 27 deletions(-)hw/block/pflash_cfi02.c +5
-28@@ -196,33 +196,11 @@ static uint32_t pflash_read(PFlashCFI02 *pfl, hwaddr offset,case 0x00 : flash_read:/* Flash area read */ - p = pfl->storage; -switch (width) { -case 1 : - ret = p[offset]; -break ; -case 2 : -if (be) { - ret = p[offset] <<8 ; - ret |= p[offset +1 ]; - }else { - ret = p[offset]; - ret |= p[offset +1 ] <<8 ; - } -break ; -case 4 : -if (be) { - ret = p[offset] <<24 ; - ret |= p[offset +1 ] <<16 ; - ret |= p[offset +2 ] <<8 ; - ret |= p[offset +3 ]; - }else { - ret = p[offset]; - ret |= p[offset +1 ] <<8 ; - ret |= p[offset +2 ] <<16 ; - ret |= p[offset +3 ] <<24 ; - } -break ; + p = (uint8_t *)pfl->storage + offset; +if (pfl->be) { + ret =ldn_be_p (p, width); + }else { + ret =ldn_le_p (p, width); }trace_pflash_data_read (offset, width <<1 , ret);break ; --2.20.1
PATCH v5 10/28 hw/block/pflash_cfi02: Extract the pflash_data_read() function
In reply to Philippe Mathieu-DaudéExtract the code block in a new function, remove a goto statement.
Message-Id: <[email protected]>
--- hw/block/pflash_cfi02.c | 24 ++++++++++++++---------- 1 file changed, 14 insertions(+), 10 deletions(-)
hw/block/pflash_cfi02.c +14 -10
@@ -165,12 +165,23 @@ static void pflash_timer (void *opaque) pfl->cmd =0 ; } +/* +* Read data from flash. +*/ +static uint64_t pflash_data_read (PFlashCFI02 *pfl,hwaddr offset, +unsigned int width) +{ +uint8_t *p = (uint8_t *)pfl->storage + offset; +uint64_t ret = pfl->be ?ldn_be_p (p, width) :ldn_le_p (p, width); +trace_pflash_data_read (offset, width <<1 , ret); +return ret; +} +static uint32_t pflash_read (PFlashCFI02 *pfl,hwaddr offset,int width,int be) {hwaddr boff;uint32_t ret; -uint8_t *p; ret =-1 ;/* Lazy reset to ROMD mode after a certain amount of read accesses */
@@ -194,15 +205,8 @@ static uint32_t pflash_read(PFlashCFI02 *pfl, hwaddr offset,case 0x80 :/* We accept reads during second unlock sequence... */ case 0x00 : - flash_read:/* Flash area read */ - p = (uint8_t *)pfl->storage + offset; -if (pfl->be) { - ret =ldn_be_p (p, width); - }else { - ret =ldn_le_p (p, width); - } -trace_pflash_data_read (offset, width <<1 , ret); + ret =pflash_data_read (pfl, offset, width);break ;case 0x90 :/* flash ID read */
@@ -222,7 +226,7 @@ static uint32_t pflash_read(PFlashCFI02 *pfl, hwaddr offset, }/* Fall through to data read. */ default : - goto flash_read; + ret =pflash_data_read (pfl, offset, width); }DPRINTF ("%s: ID " TARGET_FMT_plx" %" PRIx32"\n" , __func__, boff, ret);break ;
Signature · 1 line
2.20.1
Re: [Qemu-devel] [PATCH v5 10/28] hw/block/pflash_cfi02: Extract the pflash_data_read() function
Quoted 9 lines · Philippe Mathieu-Daudé
Extract the code block in a new function, remove a goto statement.
Signed-off-by Stephen Checkoway <[email protected]>Message-Id: <[email protected]>
Reviewed-by Philippe Mathieu-Daudé <[email protected]>[PMD: Extracted from bigger patch, remove the XXX tracing comment]Signed-off-by Philippe Mathieu-Daudé <[email protected]>
Alistair
Quoted 63 lines
--- hw/block/pflash_cfi02.c | 24 ++++++++++++++---------- 1 file changed, 14 insertions(+), 10 deletions(-)hw/block/pflash_cfi02.c +14
-11@@ -165,12 +165,23 @@ static void pflash_timer (void *opaque) pfl->cmd =0 ; } +/* +* Read data from flash. +*/ +static uint64_t pflash_data_read (PFlashCFI02 *pfl,hwaddr offset, +unsigned int width) +{ +uint8_t *p = (uint8_t *)pfl->storage + offset; +uint64_t ret = pfl->be ?ldn_be_p (p, width) :ldn_le_p (p, width); +trace_pflash_data_read (offset, width <<1 , ret); +return ret; +} +static uint32_t pflash_read (PFlashCFI02 *pfl,hwaddr offset,int width,int be) {hwaddr boff;uint32_t ret; -uint8_t *p; ret =-1 ;/* Lazy reset to ROMD mode after a certain amount of read accesses */ @@ -194,15 +205,8 @@ static uint32_t pflash_read(PFlashCFI02 *pfl, hwaddr offset,case 0x80 :/* We accept reads during second unlock sequence... */ case 0x00 : - flash_read:/* Flash area read */ - p = (uint8_t *)pfl->storage + offset; -if (pfl->be) { - ret =ldn_be_p (p, width); - }else { - ret =ldn_le_p (p, width); - } -trace_pflash_data_read (offset, width <<1 , ret); + ret =pflash_data_read (pfl, offset, width);break ;case 0x90 :/* flash ID read */ @@ -222,7 +226,7 @@ static uint32_t pflash_read(PFlashCFI02 *pfl, hwaddr offset, }/* Fall through to data read. */ default : - goto flash_read; + ret =pflash_data_read (pfl, offset, width); }DPRINTF ("%s: ID " TARGET_FMT_plx" %" PRIx32"\n" , __func__, boff, ret);break ; --2.20.1
PATCH v5 11/28 hw/block/pflash_cfi02: Unify the MemoryRegionOps
In reply to Philippe Mathieu-DaudéThe pflash_read()/pflash_write() can check the device endianess via the pfl->be variable, so remove the 'int be' argument.
Since the big/little MemoryRegionOps are now identical, it is pointless to declare them both. Unify them.
Message-Id: <[email protected]>
--- hw/block/pflash_cfi02.c | 60 +++++++++++------------------------------ 1 file changed, 15 insertions(+), 45 deletions(-)
hw/block/pflash_cfi02.c +15 -45
@@ -177,11 +177,11 @@ static uint64_t pflash_data_read(PFlashCFI02 *pfl, hwaddr offset,return ret; } -static uint32_t pflash_read (PFlashCFI02 *pfl,hwaddr offset, -int width,int be) +static uint64_t pflash_read (void *opaque,hwaddr offset,unsigned int width) { +PFlashCFI02 *pfl = opaque;hwaddr boff; -uint32_t ret; +uint64_t ret; ret =-1 ;/* Lazy reset to ROMD mode after a certain amount of read accesses */
@@ -228,14 +228,14 @@ static uint32_t pflash_read(PFlashCFI02 *pfl, hwaddr offset,default : ret =pflash_data_read (pfl, offset, width); } -DPRINTF ("%s: ID " TARGET_FMT_plx" %" PRIx32"\n" , __func__, boff, ret); +DPRINTF ("%s: ID " TARGET_FMT_plx" %" PRIx64"\n" , __func__, boff, ret);break ;case 0xA0 :case 0x10 :case 0x30 :/* Status register read */ ret = pfl->status; -DPRINTF ("%s: status %" PRIx32"\n" , __func__, ret); +DPRINTF ("%s: status %" PRIx64"\n" , __func__, ret);toggle_dq6 (pfl);break ;case 0x98 :
@@ -253,8 +253,7 @@ static uint32_t pflash_read(PFlashCFI02 *pfl, hwaddr offset, }/* update flash content on disk */ -static void pflash_update (PFlashCFI02 *pfl,int offset, -int size) +static void pflash_update (PFlashCFI02 *pfl,int offset,int size) {int offset_end;if (pfl->blk) {
@@ -267,9 +266,10 @@ static void pflash_update(PFlashCFI02 *pfl, int offset, } } -static void pflash_write (PFlashCFI02 *pfl,hwaddr offset, -uint32_t value,int width,int be) +static void pflash_write (void *opaque,hwaddr offset,uint64_t value, +unsigned int width) { +PFlashCFI02 *pfl = opaque;hwaddr boff;uint8_t *p;uint8_t cmd;
@@ -477,39 +477,9 @@ static void pflash_write(PFlashCFI02 *pfl, hwaddr offset, pfl->cmd =0 ; } -static uint64_t pflash_be_readfn (void *opaque,hwaddr addr,unsigned size) -{ -return pflash_read (opaque, addr, size,1 ); -} - -static void pflash_be_writefn (void *opaque,hwaddr addr, -uint64_t value,unsigned size) -{ -pflash_write (opaque, addr, value, size,1 ); -} - -static uint64_t pflash_le_readfn (void *opaque,hwaddr addr,unsigned size) -{ -return pflash_read (opaque, addr, size,0 ); -} - -static void pflash_le_writefn (void *opaque,hwaddr addr, -uint64_t value,unsigned size) -{ -pflash_write (opaque, addr, value, size,0 ); -} - -static const MemoryRegionOps pflash_cfi02_ops_be = { - .read = pflash_be_readfn, - .write = pflash_be_writefn, - .valid.min_access_size =1 , - .valid.max_access_size =4 , - .endianness =DEVICE_NATIVE_ENDIAN , -}; - -static const MemoryRegionOps pflash_cfi02_ops_le = { - .read = pflash_le_readfn, - .write = pflash_le_writefn, +static const MemoryRegionOps pflash_cfi02_ops = { + .read = pflash_read, + .write = pflash_write, .valid.min_access_size =1 , .valid.max_access_size =4 , .endianness =DEVICE_NATIVE_ENDIAN ,
@@ -537,9 +507,9 @@ static void pflash_cfi02_realize(DeviceState *dev, Error **errp) chip_len = pfl->sector_len * pfl->nb_blocs; -memory_region_init_rom_device (&pfl->orig_mem,OBJECT (pfl), pfl->be ? - &pflash_cfi02_ops_be : &pflash_cfi02_ops_le, - pfl, pfl->name, chip_len, &local_err); +memory_region_init_rom_device (&pfl->orig_mem,OBJECT (pfl), + &pflash_cfi02_ops, pfl, pfl->name, + chip_len, &local_err);if (local_err) {error_propagate (errp, local_err);return ;
Signature · 1 line
2.20.1
Re: [Qemu-devel] [PATCH v5 11/28] hw/block/pflash_cfi02: Unify the MemoryRegionOps
Quoted 7 lines · Philippe Mathieu-Daudé
The pflash_read()/pflash_write() can check the device endianess via the
pfl->bevariable, so remove the 'int be' argument.Since the big/little MemoryRegionOps are now identical, it is pointless to declare them both. Unify them.
Quoted 6 lines
Signed-off-by Stephen Checkoway <[email protected]>Message-Id: <[email protected]>
Reviewed-by Philippe Mathieu-Daudé <[email protected]>[PMD: Extracted from bigger patch to ease review]Signed-off-by Philippe Mathieu-Daudé <[email protected]>
Nice cleanup!
Alistair
Quoted 123 lines
--- hw/block/pflash_cfi02.c | 60 +++++++++++------------------------------ 1 file changed, 15 insertions(+), 45 deletions(-)hw/block/pflash_cfi02.c +15
-46@@ -177,11 +177,11 @@ static uint64_t pflash_data_read(PFlashCFI02 *pfl, hwaddr offset,return ret; } -static uint32_t pflash_read (PFlashCFI02 *pfl,hwaddr offset, -int width,int be) +static uint64_t pflash_read (void *opaque,hwaddr offset,unsigned int width) { +PFlashCFI02 *pfl = opaque;hwaddr boff; -uint32_t ret; +uint64_t ret; ret =-1 ;/* Lazy reset to ROMD mode after a certain amount of read accesses */ @@ -228,14 +228,14 @@ static uint32_t pflash_read(PFlashCFI02 *pfl, hwaddr offset,default : ret =pflash_data_read (pfl, offset, width); } -DPRINTF ("%s: ID " TARGET_FMT_plx" %" PRIx32"\n" , __func__, boff, ret); +DPRINTF ("%s: ID " TARGET_FMT_plx" %" PRIx64"\n" , __func__, boff, ret);break ;case 0xA0 :case 0x10 :case 0x30 :/* Status register read */ ret = pfl->status; -DPRINTF ("%s: status %" PRIx32"\n" , __func__, ret); +DPRINTF ("%s: status %" PRIx64"\n" , __func__, ret);toggle_dq6 (pfl);break ;case 0x98 :@@ -253,8 +253,7 @@ static uint32_t pflash_read(PFlashCFI02 *pfl, hwaddr offset, }/* update flash content on disk */ -static void pflash_update (PFlashCFI02 *pfl,int offset, -int size) +static void pflash_update (PFlashCFI02 *pfl,int offset,int size) {int offset_end;if (pfl->blk) {@@ -267,9 +266,10 @@ static void pflash_update(PFlashCFI02 *pfl, int offset, } } -static void pflash_write (PFlashCFI02 *pfl,hwaddr offset, -uint32_t value,int width,int be) +static void pflash_write (void *opaque,hwaddr offset,uint64_t value, +unsigned int width) { +PFlashCFI02 *pfl = opaque;hwaddr boff;uint8_t *p;uint8_t cmd;@@ -477,39 +477,9 @@ static void pflash_write(PFlashCFI02 *pfl, hwaddr offset, pfl->cmd =0 ; } -static uint64_t pflash_be_readfn (void *opaque,hwaddr addr,unsigned size) -{ -return pflash_read (opaque, addr, size,1 ); -} - -static void pflash_be_writefn (void *opaque,hwaddr addr, -uint64_t value,unsigned size) -{ -pflash_write (opaque, addr, value, size,1 ); -} - -static uint64_t pflash_le_readfn (void *opaque,hwaddr addr,unsigned size) -{ -return pflash_read (opaque, addr, size,0 ); -} - -static void pflash_le_writefn (void *opaque,hwaddr addr, -uint64_t value,unsigned size) -{ -pflash_write (opaque, addr, value, size,0 ); -} - -static const MemoryRegionOps pflash_cfi02_ops_be = { - .read = pflash_be_readfn, - .write = pflash_be_writefn, - .valid.min_access_size =1 , - .valid.max_access_size =4 , - .endianness =DEVICE_NATIVE_ENDIAN , -}; - -static const MemoryRegionOps pflash_cfi02_ops_le = { - .read = pflash_le_readfn, - .write = pflash_le_writefn, +static const MemoryRegionOps pflash_cfi02_ops = { + .read = pflash_read, + .write = pflash_write, .valid.min_access_size =1 , .valid.max_access_size =4 , .endianness =DEVICE_NATIVE_ENDIAN ,@@ -537,9 +507,9 @@ static void pflash_cfi02_realize(DeviceState *dev, Error **errp) chip_len = pfl->sector_len * pfl->nb_blocs; -memory_region_init_rom_device (&pfl->orig_mem,OBJECT (pfl), pfl->be ? - &pflash_cfi02_ops_be : &pflash_cfi02_ops_le, - pfl, pfl->name, chip_len, &local_err); +memory_region_init_rom_device (&pfl->orig_mem,OBJECT (pfl), + &pflash_cfi02_ops, pfl, pfl->name, + chip_len, &local_err);if (local_err) {error_propagate (errp, local_err);return ; --2.20.1
PATCH v5 12/28 hw/block/pflash_cfi02: Fix command address comparison
In reply to Philippe Mathieu-DaudéFrom: Stephen Checkoway <[email protected]>
Most AMD commands only examine 11 bits of the address. This masks the addresses used in the comparison to 11 bits. The exceptions are word or sector addresses which use offset directly rather than the shifted offset, boff.
Message-Id: <[email protected]>
--- hw/block/pflash_cfi02.c | 8 +++++++- tests/pflash-cfi02-test.c | 12 ++++++++++-- 2 files changed, 17 insertions(+), 3 deletions(-)
hw/block/pflash_cfi02.c +7 -1
@@ -281,11 +281,13 @@ static void pflash_write(void *opaque, hwaddr offset, uint64_t value, } offset &= pfl->chip_len -1 ; - boff = offset & (pfl->sector_len -1 ); + boff = offset;if (pfl->width ==2 ) boff = boff >>1 ;else if (pfl->width ==4 ) boff = boff >>2 ; +/* Only the least-significant 11 bits are used in most cases. */ + boff &=0x7FF ;switch (pfl->wcycle) {case 0 :/* Set the device in I/O access mode if required */
@@ -538,6 +540,10 @@ static void pflash_cfi02_realize(DeviceState *dev, Error **errp) } } +/* Only 11 bits are used in the comparison. */ + pfl->unlock_addr0 &=0x7FF ; + pfl->unlock_addr1 &=0x7FF ; +pflash_setup_mappings (pfl); pfl->rom_mode =1 ;sysbus_init_mmio (SYS_BUS_DEVICE (dev), &pfl->mem);
tests/pflash-cfi02-test.c +10 -2
@@ -21,8 +21,8 @@#define FLASH_WIDTH 2#define CFI_ADDR (FLASH_WIDTH * 0x55) -#define UNLOCK0_ADDR (FLASH_WIDTH * 0x5555) -#define UNLOCK1_ADDR (FLASH_WIDTH * 0x2AAA) +#define UNLOCK0_ADDR (FLASH_WIDTH * 0x555) +#define UNLOCK1_ADDR (FLASH_WIDTH * 0x2AA)#define CFI_CMD 0x98#define UNLOCK0_CMD 0xAA
@@ -190,6 +190,14 @@ static void test_flash(void) g_assert_cmphex(flash_read(6), ==, 0xCDEF); g_assert_cmphex(flash_read(8), ==, 0xFFFF); +/* Test ignored high order bits of address. */ +flash_write (FLASH_WIDTH *0x5555 ,UNLOCK0_CMD ); +flash_write (FLASH_WIDTH *0x2AAA ,UNLOCK1_CMD ); +flash_write (FLASH_WIDTH *0x5555 ,AUTOSELECT_CMD ); + g_assert_cmpint(flash_read(FLASH_WIDTH * 0x0000), ==, 0x00BF); + g_assert_cmpint(flash_read(FLASH_WIDTH * 0x0001), ==, 0x236D); +reset (); +qtest_quit (global_qtest); }
Signature · 1 line
2.20.1
Re: [Qemu-devel] [PATCH v5 12/28] hw/block/pflash_cfi02: Fix command address comparison
Quoted 8 lines · Philippe Mathieu-Daudé
From: Stephen Checkoway <[email protected]>
Most AMD commands only examine 11 bits of the address. This masks the addresses used in the comparison to 11 bits. The exceptions are word or sector addresses which use offset directly rather than the shifted offset, boff.
Quoted 5 lines
Signed-off-by Stephen Checkoway <[email protected]>Acked-by Thomas Huth <[email protected]>Message-Id: <[email protected]>
[PMD: Prepend 'hw/' in patch subject]Signed-off-by Philippe Mathieu-Daudé <[email protected]>
Alistair
Quoted 69 lines
--- hw/block/pflash_cfi02.c | 8 +++++++- tests/pflash-cfi02-test.c | 12 ++++++++++-- 2 files changed, 17 insertions(+), 3 deletions(-)hw/block/pflash_cfi02.c +7
-1@@ -281,11 +281,13 @@ static void pflash_write(void *opaque, hwaddr offset, uint64_t value, } offset &= pfl->chip_len -1 ; - boff = offset & (pfl->sector_len -1 ); + boff = offset;if (pfl->width ==2 ) boff = boff >>1 ;else if (pfl->width ==4 ) boff = boff >>2 ; +/* Only the least-significant 11 bits are used in most cases. */ + boff &=0x7FF ;switch (pfl->wcycle) {case 0 :/* Set the device in I/O access mode if required */ @@ -538,6 +540,10 @@ static void pflash_cfi02_realize(DeviceState *dev, Error **errp) } } +/* Only 11 bits are used in the comparison. */ + pfl->unlock_addr0 &=0x7FF ; + pfl->unlock_addr1 &=0x7FF ; +pflash_setup_mappings (pfl); pfl->rom_mode =1 ;sysbus_init_mmio (SYS_BUS_DEVICE (dev), &pfl->mem);tests/pflash-cfi02-test.c +10
-3@@ -21,8 +21,8 @@#define FLASH_WIDTH 2#define CFI_ADDR (FLASH_WIDTH * 0x55) -#define UNLOCK0_ADDR (FLASH_WIDTH * 0x5555) -#define UNLOCK1_ADDR (FLASH_WIDTH * 0x2AAA) +#define UNLOCK0_ADDR (FLASH_WIDTH * 0x555) +#define UNLOCK1_ADDR (FLASH_WIDTH * 0x2AA)#define CFI_CMD 0x98#define UNLOCK0_CMD 0xAA@@ -190,6 +190,14 @@ static void test_flash(void) g_assert_cmphex(flash_read(6), ==, 0xCDEF); g_assert_cmphex(flash_read(8), ==, 0xFFFF); +/* Test ignored high order bits of address. */ +flash_write (FLASH_WIDTH *0x5555 ,UNLOCK0_CMD ); +flash_write (FLASH_WIDTH *0x2AAA ,UNLOCK1_CMD ); +flash_write (FLASH_WIDTH *0x5555 ,AUTOSELECT_CMD ); + g_assert_cmpint(flash_read(FLASH_WIDTH * 0x0000), ==, 0x00BF); + g_assert_cmpint(flash_read(FLASH_WIDTH * 0x0001), ==, 0x236D); +reset (); +qtest_quit (global_qtest); } --2.20.1
PATCH v5 13/28 tests/pflash-cfi02: Refactor to support testing multiple configurations
In reply to Philippe Mathieu-DaudéIntroduce the FlashConfig structure, to be able to run the same set of tests on different flash models/configurations.
Message-Id: <[email protected]>
--- tests/pflash-cfi02-test.c | 386 +++++++++++++++++++++++++++----------- 1 file changed, 277 insertions(+), 109 deletions(-)
tests/pflash-cfi02-test.c +277 -109
@@ -17,12 +17,18 @@*/ #define MP_FLASH_SIZE_MAX (32 * 1024 * 1024) +#define FLASH_SIZE (8 * 1024 * 1024)#define BASE_ADDR (0x100000000ULL - MP_FLASH_SIZE_MAX) -#define FLASH_WIDTH 2 -#define CFI_ADDR (FLASH_WIDTH * 0x55) -#define UNLOCK0_ADDR (FLASH_WIDTH * 0x555) -#define UNLOCK1_ADDR (FLASH_WIDTH * 0x2AA) +/* Use a newtype to keep flash addresses separate from byte addresses. */ +typedef struct { +uint64_t addr; +}faddr ; +#define FLASH_ADDR (x) ((faddr) { .addr = (x) }) + +#define CFI_ADDR FLASH_ADDR(0x55) +#define UNLOCK0_ADDR FLASH_ADDR(0x555) +#define UNLOCK1_ADDR FLASH_ADDR(0x2AA)#define CFI_CMD 0x98#define UNLOCK0_CMD 0xAA
@@ -35,170 +41,313 @@#define UNLOCK_BYPASS_CMD 0x20#define UNLOCK_BYPASS_RESET_CMD 0x00 +typedef struct { +int bank_width; + +QTestState *qtest; +}FlashConfig ; +static char image_path[] ="/tmp/qtest.XXXXXX" ; -static inline void flash_write (uint64_t byte_addr,uint16_t data) +/* +* The pflash implementation allows some parameters to be unspecified. We want +* to test those configurations but we also need to know the real values in +* our testing code. So after we launch qemu, we'll need a new FlashConfig +* with the correct values filled in. +*/ +static FlashConfig expand_config_defaults (const FlashConfig *c) { -qtest_writew (global_qtest,BASE_ADDR + byte_addr, data); +FlashConfig ret = *c; + +if (ret.bank_width ==0 ) { + ret.bank_width =2 ; + } + +/* XXX: Limitations of test harness. */ +assert (ret.bank_width ==2 ); +return ret; } -static inline uint16_t flash_read (uint64_t byte_addr) +/* +* Return a bit mask suitable for extracting the least significant +* status/query response from an interleaved response. +*/ +static inline uint64_t device_mask (const FlashConfig *c) { -return qtest_readw (global_qtest,BASE_ADDR + byte_addr); +return (uint64_t )-1 ; } -static void unlock (void ) +/* +* Return a bit mask exactly as long as the bank_width. +*/ +static inline uint64_t bank_mask (const FlashConfig *c) { -flash_write (UNLOCK0_ADDR ,UNLOCK0_CMD ); -flash_write (UNLOCK1_ADDR ,UNLOCK1_CMD ); +if (c->bank_width ==8 ) { +return (uint64_t )-1 ; + } +return (1ULL << (c->bank_width *8 )) -1ULL ; } -static void reset (void ) +static inline void flash_write (const FlashConfig *c,uint64_t byte_addr, +uint64_t data) { -flash_write (0 ,RESET_CMD ); -} - -static void sector_erase (uint64_t byte_addr) -{ -unlock (); -flash_write (UNLOCK0_ADDR ,0x80 ); -unlock (); -flash_write (byte_addr,SECTOR_ERASE_CMD ); -} - -static void wait_for_completion (uint64_t byte_addr) -{ -/* If DQ6 is toggling, step the clock and ensure the toggle stops. */ -if ((flash_read (byte_addr) &0x40 ) ^ (flash_read (byte_addr) &0x40 )) { -/* Wait for erase or program to finish. */ -clock_step_next (); -/* Ensure that DQ6 has stopped toggling. */ - g_assert_cmphex(flash_read(byte_addr), ==, flash_read(byte_addr)); +/* Sanity check our tests. */ +assert ((data & ~bank_mask (c)) ==0 ); +uint64_t addr =BASE_ADDR + byte_addr; +switch (c->bank_width) { +case 1 : +qtest_writeb (c->qtest, addr, data); +break ; +case 2 : +qtest_writew (c->qtest, addr, data); +break ; +case 4 : +qtest_writel (c->qtest, addr, data); +break ; +case 8 : +qtest_writeq (c->qtest, addr, data); +break ; +default : +abort (); } } -static void bypass_program (uint64_t byte_addr,uint16_t data) +static inline uint64_t flash_read (const FlashConfig *c,uint64_t byte_addr) { -flash_write (UNLOCK0_ADDR ,PROGRAM_CMD ); -flash_write (byte_addr, data); +uint64_t addr =BASE_ADDR + byte_addr; +switch (c->bank_width) { +case 1 : +return qtest_readb (c->qtest, addr); +case 2 : +return qtest_readw (c->qtest, addr); +case 4 : +return qtest_readl (c->qtest, addr); +case 8 : +return qtest_readq (c->qtest, addr); +default : +abort (); + } +} + +/* +* Convert a flash address expressed in the maximum width of the device as a +* byte address. +*/ +static inline uint64_t as_byte_addr (const FlashConfig *c,faddr flash_addr) +{ +/* +* Command addresses are always given as addresses in the maximum +* supported bus size for the flash chip. So an x8/x16 chip in x8 mode +* uses addresses 0xAAA and 0x555 to unlock because the least significant +* bit is ignored. (0x555 rather than 0x554 is traditional.) +* +* In general we need to multiply by the maximum device width. +*/ +return flash_addr.addr * c->bank_width; +} + +/* +* Return the command value or expected status replicated across all devices. +*/ +static inline uint64_t replicate (const FlashConfig *c,uint64_t data) +{ +/* Sanity check our tests. */ +assert ((data & ~device_mask (c)) ==0 ); +return data; +} + +static inline void flash_cmd (const FlashConfig *c,faddr cmd_addr, +uint8_t cmd) +{ +flash_write (c,as_byte_addr (c, cmd_addr),replicate (c, cmd)); +} + +static inline uint64_t flash_query (const FlashConfig *c,faddr query_addr) +{ +return flash_read (c,as_byte_addr (c, query_addr)); +} + +static inline uint64_t flash_query_1 (const FlashConfig *c,faddr query_addr) +{ +return flash_query (c, query_addr) &device_mask (c); +} + +static void unlock (const FlashConfig *c) +{ +flash_cmd (c,UNLOCK0_ADDR ,UNLOCK0_CMD ); +flash_cmd (c,UNLOCK1_ADDR ,UNLOCK1_CMD ); +} + +static void reset (const FlashConfig *c) +{ +flash_cmd (c,FLASH_ADDR (0 ),RESET_CMD ); +} + +static void sector_erase (const FlashConfig *c,uint64_t byte_addr) +{ +unlock (c); +flash_cmd (c,UNLOCK0_ADDR ,0x80 ); +unlock (c); +flash_write (c, byte_addr,replicate (c,SECTOR_ERASE_CMD )); +} + +static void wait_for_completion (const FlashConfig *c,uint64_t byte_addr) +{ +/* If DQ6 is toggling, step the clock and ensure the toggle stops. */ +const uint64_t dq6 =replicate (c,0x40 ); +if ((flash_read (c, byte_addr) & dq6) ^ (flash_read (c, byte_addr) & dq6)) { +/* Wait for erase or program to finish. */ +qtest_clock_step_next (c->qtest); +/* Ensure that DQ6 has stopped toggling. */ + g_assert_cmphex(flash_read(c, byte_addr), ==, flash_read(c, byte_addr)); + } +} + +static void bypass_program (const FlashConfig *c,uint64_t byte_addr, +uint16_t data) +{ +flash_cmd (c,UNLOCK0_ADDR ,PROGRAM_CMD ); +flash_write (c, byte_addr, data);/* * Data isn't valid until DQ6 stops toggling. We don't model this as * writes are immediate, but if this changes in the future, we can wait * until the program is complete. */ -wait_for_completion (byte_addr); +wait_for_completion (c, byte_addr); } -static void program (uint64_t byte_addr,uint16_t data) +static void program (const FlashConfig *c,uint64_t byte_addr,uint16_t data) { -unlock (); -bypass_program (byte_addr, data); +unlock (c); +bypass_program (c, byte_addr, data); } -static void chip_erase (void ) +static void chip_erase (const FlashConfig *c) { -unlock (); -flash_write (UNLOCK0_ADDR ,0x80 ); -unlock (); -flash_write (UNLOCK0_ADDR ,SECTOR_ERASE_CMD ); +unlock (c); +flash_cmd (c,UNLOCK0_ADDR ,0x80 ); +unlock (c); +flash_cmd (c,UNLOCK0_ADDR ,CHIP_ERASE_CMD ); } -static void test_flash (void ) +static void test_flash (const void *opaque) { - global_qtest =qtest_initf ("-M musicpal,accel=qtest " -"-drive if=pflash,file=%s,format=raw,copy-on-read" , - image_path); +const FlashConfig *config = opaque; +QTestState *qtest; + qtest =qtest_initf ("-M musicpal,accel=qtest" +" -drive if=pflash,file=%s,format=raw,copy-on-read" , + image_path); +FlashConfig explicit_config =expand_config_defaults (config); + explicit_config.qtest = qtest; +const FlashConfig *c = &explicit_config; +/* Check the IDs. */ -unlock (); -flash_write (UNLOCK0_ADDR ,AUTOSELECT_CMD ); - g_assert_cmphex(flash_read(FLASH_WIDTH * 0x0000), ==, 0x00BF); - g_assert_cmphex(flash_read(FLASH_WIDTH * 0x0001), ==, 0x236D); -reset (); +unlock (c); +flash_cmd (c,UNLOCK0_ADDR ,AUTOSELECT_CMD ); + g_assert_cmphex(flash_query(c, FLASH_ADDR(0)), ==, replicate(c, 0xBF)); +if (c->bank_width >=2 ) { +/* +* XXX: The ID returned by the musicpal flash chip is 16 bits which +* wouldn't happen with an 8-bit device. It would probably be best to +* prohibit addresses larger than the device width in pflash_cfi02.c, +* but then we couldn't test smaller device widths at all. +*/ + g_assert_cmphex(flash_query(c, FLASH_ADDR(1)), ==, +replicate (c,0x236D )); + } +reset (c);/* Check the erase blocks. */ -flash_write (CFI_ADDR ,CFI_CMD ); - g_assert_cmphex(flash_read(FLASH_WIDTH * 0x10), ==, 'Q'); - g_assert_cmphex(flash_read(FLASH_WIDTH * 0x11), ==, 'R'); - g_assert_cmphex(flash_read(FLASH_WIDTH * 0x12), ==, 'Y'); -/* Num erase regions. */ - g_assert_cmphex(flash_read(FLASH_WIDTH * 0x2C), >=, 1); -uint32_t nb_sectors =flash_read (FLASH_WIDTH *0x2D ) + - (flash_read (FLASH_WIDTH *0x2E ) <<8 ) +1 ; -uint32_t sector_len = (flash_read (FLASH_WIDTH *0x2F ) <<8 ) + - (flash_read (FLASH_WIDTH *0x30 ) <<16 ); -reset (); +flash_cmd (c,CFI_ADDR ,CFI_CMD ); + g_assert_cmphex(flash_query(c, FLASH_ADDR(0x10)), ==, replicate(c, 'Q')); + g_assert_cmphex(flash_query(c, FLASH_ADDR(0x11)), ==, replicate(c, 'R')); + g_assert_cmphex(flash_query(c, FLASH_ADDR(0x12)), ==, replicate(c, 'Y')); +/* Num erase regions. */ + g_assert_cmphex(flash_query_1(c, FLASH_ADDR(0x2C)), >=, 1); + +uint32_t nb_sectors =flash_query_1 (c,FLASH_ADDR (0x2D )) + + (flash_query_1 (c,FLASH_ADDR (0x2E )) <<8 ) +1 ; +uint32_t sector_len = (flash_query_1 (c,FLASH_ADDR (0x2F )) <<8 ) + + (flash_query_1 (c,FLASH_ADDR (0x30 )) <<16 ); +reset (c); + +const uint64_t dq7 =replicate (c,0x80 ); +const uint64_t dq6 =replicate (c,0x40 );/* Erase and program sector. */ for (uint32_t i =0 ; i < nb_sectors; ++i) {uint64_t byte_addr = i * sector_len; -sector_erase (byte_addr); +sector_erase (c, byte_addr);/* Read toggle. */ -uint16_t status0 =flash_read (byte_addr); +uint64_t status0 =flash_read (c, byte_addr);/* DQ7 is 0 during an erase. */ - g_assert_cmphex(status0 & 0x80, ==, 0); -uint16_t status1 =flash_read (byte_addr); + g_assert_cmphex(status0 & dq7, ==, 0); +uint64_t status1 =flash_read (c, byte_addr);/* DQ6 toggles during an erase. */ - g_assert_cmphex(status0 & 0x40, !=, status1 & 0x40); + g_assert_cmphex(status0 & dq6, ==, ~status1 & dq6);/* Wait for erase to complete. */ -clock_step_next (); +qtest_clock_step_next (c->qtest);/* Ensure DQ6 has stopped toggling. */ - g_assert_cmphex(flash_read(byte_addr), ==, flash_read(byte_addr)); + g_assert_cmphex(flash_read(c, byte_addr), ==, flash_read(c, byte_addr));/* Now the data should be valid. */ - g_assert_cmphex(flash_read(byte_addr), ==, 0xFFFF); + g_assert_cmphex(flash_read(c, byte_addr), ==, bank_mask(c));/* Program a bit pattern. */ -program (byte_addr,0x5555 ); - g_assert_cmphex(flash_read(byte_addr), ==, 0x5555); -program (byte_addr,0xAA55 ); - g_assert_cmphex(flash_read(byte_addr), ==, 0x0055); +program (c, byte_addr,0x55 ); + g_assert_cmphex(flash_read(c, byte_addr) & 0xFF, ==, 0x55); +program (c, byte_addr,0xA5 ); + g_assert_cmphex(flash_read(c, byte_addr) & 0xFF, ==, 0x05); }/* Erase the chip. */ -chip_erase (); +chip_erase (c);/* Read toggle. */ -uint16_t status0 =flash_read (0 ); +uint64_t status0 =flash_read (c,0 );/* DQ7 is 0 during an erase. */ - g_assert_cmphex(status0 & 0x80, ==, 0); -uint16_t status1 =flash_read (0 ); + g_assert_cmphex(status0 & dq7, ==, 0); +uint64_t status1 =flash_read (c,0 );/* DQ6 toggles during an erase. */ - g_assert_cmphex(status0 & 0x40, !=, status1 & 0x40); + g_assert_cmphex(status0 & dq6, ==, ~status1 & dq6);/* Wait for erase to complete. */ -clock_step_next (); +qtest_clock_step_next (c->qtest);/* Ensure DQ6 has stopped toggling. */ - g_assert_cmphex(flash_read(0), ==, flash_read(0)); + g_assert_cmphex(flash_read(c, 0), ==, flash_read(c, 0));/* Now the data should be valid. */ - g_assert_cmphex(flash_read(0), ==, 0xFFFF); + +for (uint32_t i =0 ; i < nb_sectors; ++i) { +uint64_t byte_addr = i * sector_len; + g_assert_cmphex(flash_read(c, byte_addr), ==, bank_mask(c)); + }/* Unlock bypass */ -unlock (); -flash_write (UNLOCK0_ADDR ,UNLOCK_BYPASS_CMD ); -bypass_program (0 ,0x0123 ); -bypass_program (2 ,0x4567 ); -bypass_program (4 ,0x89AB ); +unlock (c); +flash_cmd (c,UNLOCK0_ADDR ,UNLOCK_BYPASS_CMD ); +bypass_program (c,0 * c->bank_width,0x01 ); +bypass_program (c,1 * c->bank_width,0x23 ); +bypass_program (c,2 * c->bank_width,0x45 );/* * Test that bypass programming, unlike normal programming can use any * address for the PROGRAM_CMD. */ -flash_write (6 ,PROGRAM_CMD ); -flash_write (6 ,0xCDEF ); -wait_for_completion (6 ); -flash_write (0 ,UNLOCK_BYPASS_RESET_CMD ); -bypass_program (8 ,0x55AA );/* Should fail. */ - g_assert_cmphex(flash_read(0), ==, 0x0123); - g_assert_cmphex(flash_read(2), ==, 0x4567); - g_assert_cmphex(flash_read(4), ==, 0x89AB); - g_assert_cmphex(flash_read(6), ==, 0xCDEF); - g_assert_cmphex(flash_read(8), ==, 0xFFFF); +flash_cmd (c,FLASH_ADDR (3 * c->bank_width),PROGRAM_CMD ); +flash_write (c,3 * c->bank_width,0x67 ); +wait_for_completion (c,3 * c->bank_width); +flash_cmd (c,FLASH_ADDR (0 ),UNLOCK_BYPASS_RESET_CMD ); +bypass_program (c,4 * c->bank_width,0x89 );/* Should fail. */ + g_assert_cmphex(flash_read(c, 0 * c->bank_width), ==, 0x01); + g_assert_cmphex(flash_read(c, 1 * c->bank_width), ==, 0x23); + g_assert_cmphex(flash_read(c, 2 * c->bank_width), ==, 0x45); + g_assert_cmphex(flash_read(c, 3 * c->bank_width), ==, 0x67); + g_assert_cmphex(flash_read(c, 4 * c->bank_width), ==, bank_mask(c));/* Test ignored high order bits of address. */ -flash_write (FLASH_WIDTH *0x5555 ,UNLOCK0_CMD ); -flash_write (FLASH_WIDTH *0x2AAA ,UNLOCK1_CMD ); -flash_write (FLASH_WIDTH *0x5555 ,AUTOSELECT_CMD ); - g_assert_cmpint(flash_read(FLASH_WIDTH * 0x0000), ==, 0x00BF); - g_assert_cmpint(flash_read(FLASH_WIDTH * 0x0001), ==, 0x236D); -reset (); +flash_cmd (c,FLASH_ADDR (0x5555 ),UNLOCK0_CMD ); +flash_cmd (c,FLASH_ADDR (0x2AAA ),UNLOCK1_CMD ); +flash_cmd (c,FLASH_ADDR (0x5555 ),AUTOSELECT_CMD ); + g_assert_cmphex(flash_query(c, FLASH_ADDR(0)), ==, replicate(c, 0xBF)); +reset (c); -qtest_quit (global_qtest); +qtest_quit (qtest); }static void cleanup (void *opaque)
@@ -206,6 +355,17 @@ static void cleanup(void *opaque)unlink (image_path); } +/* +* XXX: Tests are limited to bank_width = 2 for now because that's what +* hw/arm/musicpal.c has. +*/ +static const FlashConfig configuration[] = { +/* One x16 device. */ + { + .bank_width =2 , + }, +}; +int main (int argc,char **argv) {int fd =mkstemp (image_path);
@@ -214,19 +374,27 @@ int main(int argc, char **argv) strerror(errno));exit (EXIT_FAILURE ); } -if (ftruncate (fd,8 *1024 *1024 ) <0 ) { +if (ftruncate (fd,FLASH_SIZE ) <0 ) {int error_code = errno;close (fd);unlink (image_path); -g_printerr ("Failed to truncate file %s to 8 MB: %s\n" , image_path, -strerror (error_code)); +g_printerr ("Failed to truncate file %s to %u MB: %s\n" , image_path, +FLASH_SIZE ,strerror (error_code));exit (EXIT_FAILURE ); }close (fd);qtest_add_abrt_handler (cleanup,NULL );g_test_init (&argc, &argv,NULL ); -qtest_add_func ("pflash-cfi02" , test_flash); + +size_t nb_configurations =sizeof configuration /sizeof configuration[0 ]; +for (size_t i =0 ; i < nb_configurations; ++i) { +const FlashConfig *config = &configuration[i]; +char *path =g_strdup_printf ("pflash-cfi02/%d" , + config->bank_width); +qtest_add_data_func (path, config, test_flash); +g_free (path); + }int result =g_test_run ();cleanup (NULL );return result;
Signature · 1 line
2.20.1
Re: [Qemu-devel] [PATCH v5 13/28] tests/pflash-cfi02: Refactor to support testing multiple configurations
Quoted 8 lines · Philippe Mathieu-Daudé
Introduce the FlashConfig structure, to be able to run the same set of tests on different flash models/configurations.
Signed-off-by Stephen Checkoway <[email protected]>Message-Id: <[email protected]>
[PMD: Extracted from bigger patch]Signed-off-by Philippe Mathieu-Daudé <[email protected]>
Alistair
Quoted 500 lines
--- tests/pflash-cfi02-test.c | 386 +++++++++++++++++++++++++++----------- 1 file changed, 277 insertions(+), 109 deletions(-)tests/pflash-cfi02-test.c +277
-110@@ -17,12 +17,18 @@*/ #define MP_FLASH_SIZE_MAX (32 * 1024 * 1024) +#define FLASH_SIZE (8 * 1024 * 1024)#define BASE_ADDR (0x100000000ULL - MP_FLASH_SIZE_MAX) -#define FLASH_WIDTH 2 -#define CFI_ADDR (FLASH_WIDTH * 0x55) -#define UNLOCK0_ADDR (FLASH_WIDTH * 0x555) -#define UNLOCK1_ADDR (FLASH_WIDTH * 0x2AA) +/* Use a newtype to keep flash addresses separate from byte addresses. */ +typedef struct { +uint64_t addr; +}faddr ; +#define FLASH_ADDR (x) ((faddr) { .addr = (x) }) + +#define CFI_ADDR FLASH_ADDR(0x55) +#define UNLOCK0_ADDR FLASH_ADDR(0x555) +#define UNLOCK1_ADDR FLASH_ADDR(0x2AA)#define CFI_CMD 0x98#define UNLOCK0_CMD 0xAA@@ -35,170 +41,313 @@#define UNLOCK_BYPASS_CMD 0x20#define UNLOCK_BYPASS_RESET_CMD 0x00 +typedef struct { +int bank_width; + +QTestState *qtest; +}FlashConfig ; +static char image_path[] ="/tmp/qtest.XXXXXX" ; -static inline void flash_write (uint64_t byte_addr,uint16_t data) +/* +* The pflash implementation allows some parameters to be unspecified. We want +* to test those configurations but we also need to know the real values in +* our testing code. So after we launch qemu, we'll need a new FlashConfig +* with the correct values filled in. +*/ +static FlashConfig expand_config_defaults (const FlashConfig *c) { -qtest_writew (global_qtest,BASE_ADDR + byte_addr, data); +FlashConfig ret = *c; + +if (ret.bank_width ==0 ) { + ret.bank_width =2 ; + } + +/* XXX: Limitations of test harness. */ +assert (ret.bank_width ==2 ); +return ret; } -static inline uint16_t flash_read (uint64_t byte_addr) +/* +* Return a bit mask suitable for extracting the least significant +* status/query response from an interleaved response. +*/ +static inline uint64_t device_mask (const FlashConfig *c) { -return qtest_readw (global_qtest,BASE_ADDR + byte_addr); +return (uint64_t )-1 ; } -static void unlock (void ) +/* +* Return a bit mask exactly as long as the bank_width. +*/ +static inline uint64_t bank_mask (const FlashConfig *c) { -flash_write (UNLOCK0_ADDR ,UNLOCK0_CMD ); -flash_write (UNLOCK1_ADDR ,UNLOCK1_CMD ); +if (c->bank_width ==8 ) { +return (uint64_t )-1 ; + } +return (1ULL << (c->bank_width *8 )) -1ULL ; } -static void reset (void ) +static inline void flash_write (const FlashConfig *c,uint64_t byte_addr, +uint64_t data) { -flash_write (0 ,RESET_CMD ); -} - -static void sector_erase (uint64_t byte_addr) -{ -unlock (); -flash_write (UNLOCK0_ADDR ,0x80 ); -unlock (); -flash_write (byte_addr,SECTOR_ERASE_CMD ); -} - -static void wait_for_completion (uint64_t byte_addr) -{ -/* If DQ6 is toggling, step the clock and ensure the toggle stops. */ -if ((flash_read (byte_addr) &0x40 ) ^ (flash_read (byte_addr) &0x40 )) { -/* Wait for erase or program to finish. */ -clock_step_next (); -/* Ensure that DQ6 has stopped toggling. */ - g_assert_cmphex(flash_read(byte_addr), ==, flash_read(byte_addr)); +/* Sanity check our tests. */ +assert ((data & ~bank_mask (c)) ==0 ); +uint64_t addr =BASE_ADDR + byte_addr; +switch (c->bank_width) { +case 1 : +qtest_writeb (c->qtest, addr, data); +break ; +case 2 : +qtest_writew (c->qtest, addr, data); +break ; +case 4 : +qtest_writel (c->qtest, addr, data); +break ; +case 8 : +qtest_writeq (c->qtest, addr, data); +break ; +default : +abort (); } } -static void bypass_program (uint64_t byte_addr,uint16_t data) +static inline uint64_t flash_read (const FlashConfig *c,uint64_t byte_addr) { -flash_write (UNLOCK0_ADDR ,PROGRAM_CMD ); -flash_write (byte_addr, data); +uint64_t addr =BASE_ADDR + byte_addr; +switch (c->bank_width) { +case 1 : +return qtest_readb (c->qtest, addr); +case 2 : +return qtest_readw (c->qtest, addr); +case 4 : +return qtest_readl (c->qtest, addr); +case 8 : +return qtest_readq (c->qtest, addr); +default : +abort (); + } +} + +/* +* Convert a flash address expressed in the maximum width of the device as a +* byte address. +*/ +static inline uint64_t as_byte_addr (const FlashConfig *c,faddr flash_addr) +{ +/* +* Command addresses are always given as addresses in the maximum +* supported bus size for the flash chip. So an x8/x16 chip in x8 mode +* uses addresses 0xAAA and 0x555 to unlock because the least significant +* bit is ignored. (0x555 rather than 0x554 is traditional.) +* +* In general we need to multiply by the maximum device width. +*/ +return flash_addr.addr * c->bank_width; +} + +/* +* Return the command value or expected status replicated across all devices. +*/ +static inline uint64_t replicate (const FlashConfig *c,uint64_t data) +{ +/* Sanity check our tests. */ +assert ((data & ~device_mask (c)) ==0 ); +return data; +} + +static inline void flash_cmd (const FlashConfig *c,faddr cmd_addr, +uint8_t cmd) +{ +flash_write (c,as_byte_addr (c, cmd_addr),replicate (c, cmd)); +} + +static inline uint64_t flash_query (const FlashConfig *c,faddr query_addr) +{ +return flash_read (c,as_byte_addr (c, query_addr)); +} + +static inline uint64_t flash_query_1 (const FlashConfig *c,faddr query_addr) +{ +return flash_query (c, query_addr) &device_mask (c); +} + +static void unlock (const FlashConfig *c) +{ +flash_cmd (c,UNLOCK0_ADDR ,UNLOCK0_CMD ); +flash_cmd (c,UNLOCK1_ADDR ,UNLOCK1_CMD ); +} + +static void reset (const FlashConfig *c) +{ +flash_cmd (c,FLASH_ADDR (0 ),RESET_CMD ); +} + +static void sector_erase (const FlashConfig *c,uint64_t byte_addr) +{ +unlock (c); +flash_cmd (c,UNLOCK0_ADDR ,0x80 ); +unlock (c); +flash_write (c, byte_addr,replicate (c,SECTOR_ERASE_CMD )); +} + +static void wait_for_completion (const FlashConfig *c,uint64_t byte_addr) +{ +/* If DQ6 is toggling, step the clock and ensure the toggle stops. */ +const uint64_t dq6 =replicate (c,0x40 ); +if ((flash_read (c, byte_addr) & dq6) ^ (flash_read (c, byte_addr) & dq6)) { +/* Wait for erase or program to finish. */ +qtest_clock_step_next (c->qtest); +/* Ensure that DQ6 has stopped toggling. */ + g_assert_cmphex(flash_read(c, byte_addr), ==, flash_read(c, byte_addr)); + } +} + +static void bypass_program (const FlashConfig *c,uint64_t byte_addr, +uint16_t data) +{ +flash_cmd (c,UNLOCK0_ADDR ,PROGRAM_CMD ); +flash_write (c, byte_addr, data);/* * Data isn't valid until DQ6 stops toggling. We don't model this as * writes are immediate, but if this changes in the future, we can wait * until the program is complete. */ -wait_for_completion (byte_addr); +wait_for_completion (c, byte_addr); } -static void program (uint64_t byte_addr,uint16_t data) +static void program (const FlashConfig *c,uint64_t byte_addr,uint16_t data) { -unlock (); -bypass_program (byte_addr, data); +unlock (c); +bypass_program (c, byte_addr, data); } -static void chip_erase (void ) +static void chip_erase (const FlashConfig *c) { -unlock (); -flash_write (UNLOCK0_ADDR ,0x80 ); -unlock (); -flash_write (UNLOCK0_ADDR ,SECTOR_ERASE_CMD ); +unlock (c); +flash_cmd (c,UNLOCK0_ADDR ,0x80 ); +unlock (c); +flash_cmd (c,UNLOCK0_ADDR ,CHIP_ERASE_CMD ); } -static void test_flash (void ) +static void test_flash (const void *opaque) { - global_qtest =qtest_initf ("-M musicpal,accel=qtest " -"-drive if=pflash,file=%s,format=raw,copy-on-read" , - image_path); +const FlashConfig *config = opaque; +QTestState *qtest; + qtest =qtest_initf ("-M musicpal,accel=qtest" +" -drive if=pflash,file=%s,format=raw,copy-on-read" , + image_path); +FlashConfig explicit_config =expand_config_defaults (config); + explicit_config.qtest = qtest; +const FlashConfig *c = &explicit_config; +/* Check the IDs. */ -unlock (); -flash_write (UNLOCK0_ADDR ,AUTOSELECT_CMD ); - g_assert_cmphex(flash_read(FLASH_WIDTH * 0x0000), ==, 0x00BF); - g_assert_cmphex(flash_read(FLASH_WIDTH * 0x0001), ==, 0x236D); -reset (); +unlock (c); +flash_cmd (c,UNLOCK0_ADDR ,AUTOSELECT_CMD ); + g_assert_cmphex(flash_query(c, FLASH_ADDR(0)), ==, replicate(c, 0xBF)); +if (c->bank_width >=2 ) { +/* +* XXX: The ID returned by the musicpal flash chip is 16 bits which +* wouldn't happen with an 8-bit device. It would probably be best to +* prohibit addresses larger than the device width in pflash_cfi02.c, +* but then we couldn't test smaller device widths at all. +*/ + g_assert_cmphex(flash_query(c, FLASH_ADDR(1)), ==, +replicate (c,0x236D )); + } +reset (c);/* Check the erase blocks. */ -flash_write (CFI_ADDR ,CFI_CMD ); - g_assert_cmphex(flash_read(FLASH_WIDTH * 0x10), ==, 'Q'); - g_assert_cmphex(flash_read(FLASH_WIDTH * 0x11), ==, 'R'); - g_assert_cmphex(flash_read(FLASH_WIDTH * 0x12), ==, 'Y'); -/* Num erase regions. */ - g_assert_cmphex(flash_read(FLASH_WIDTH * 0x2C), >=, 1); -uint32_t nb_sectors =flash_read (FLASH_WIDTH *0x2D ) + - (flash_read (FLASH_WIDTH *0x2E ) <<8 ) +1 ; -uint32_t sector_len = (flash_read (FLASH_WIDTH *0x2F ) <<8 ) + - (flash_read (FLASH_WIDTH *0x30 ) <<16 ); -reset (); +flash_cmd (c,CFI_ADDR ,CFI_CMD ); + g_assert_cmphex(flash_query(c, FLASH_ADDR(0x10)), ==, replicate(c, 'Q')); + g_assert_cmphex(flash_query(c, FLASH_ADDR(0x11)), ==, replicate(c, 'R')); + g_assert_cmphex(flash_query(c, FLASH_ADDR(0x12)), ==, replicate(c, 'Y')); +/* Num erase regions. */ + g_assert_cmphex(flash_query_1(c, FLASH_ADDR(0x2C)), >=, 1); + +uint32_t nb_sectors =flash_query_1 (c,FLASH_ADDR (0x2D )) + + (flash_query_1 (c,FLASH_ADDR (0x2E )) <<8 ) +1 ; +uint32_t sector_len = (flash_query_1 (c,FLASH_ADDR (0x2F )) <<8 ) + + (flash_query_1 (c,FLASH_ADDR (0x30 )) <<16 ); +reset (c); + +const uint64_t dq7 =replicate (c,0x80 ); +const uint64_t dq6 =replicate (c,0x40 );/* Erase and program sector. */ for (uint32_t i =0 ; i < nb_sectors; ++i) {uint64_t byte_addr = i * sector_len; -sector_erase (byte_addr); +sector_erase (c, byte_addr);/* Read toggle. */ -uint16_t status0 =flash_read (byte_addr); +uint64_t status0 =flash_read (c, byte_addr);/* DQ7 is 0 during an erase. */ - g_assert_cmphex(status0 & 0x80, ==, 0); -uint16_t status1 =flash_read (byte_addr); + g_assert_cmphex(status0 & dq7, ==, 0); +uint64_t status1 =flash_read (c, byte_addr);/* DQ6 toggles during an erase. */ - g_assert_cmphex(status0 & 0x40, !=, status1 & 0x40); + g_assert_cmphex(status0 & dq6, ==, ~status1 & dq6);/* Wait for erase to complete. */ -clock_step_next (); +qtest_clock_step_next (c->qtest);/* Ensure DQ6 has stopped toggling. */ - g_assert_cmphex(flash_read(byte_addr), ==, flash_read(byte_addr)); + g_assert_cmphex(flash_read(c, byte_addr), ==, flash_read(c, byte_addr));/* Now the data should be valid. */ - g_assert_cmphex(flash_read(byte_addr), ==, 0xFFFF); + g_assert_cmphex(flash_read(c, byte_addr), ==, bank_mask(c));/* Program a bit pattern. */ -program (byte_addr,0x5555 ); - g_assert_cmphex(flash_read(byte_addr), ==, 0x5555); -program (byte_addr,0xAA55 ); - g_assert_cmphex(flash_read(byte_addr), ==, 0x0055); +program (c, byte_addr,0x55 ); + g_assert_cmphex(flash_read(c, byte_addr) & 0xFF, ==, 0x55); +program (c, byte_addr,0xA5 ); + g_assert_cmphex(flash_read(c, byte_addr) & 0xFF, ==, 0x05); }/* Erase the chip. */ -chip_erase (); +chip_erase (c);/* Read toggle. */ -uint16_t status0 =flash_read (0 ); +uint64_t status0 =flash_read (c,0 );/* DQ7 is 0 during an erase. */ - g_assert_cmphex(status0 & 0x80, ==, 0); -uint16_t status1 =flash_read (0 ); + g_assert_cmphex(status0 & dq7, ==, 0); +uint64_t status1 =flash_read (c,0 );/* DQ6 toggles during an erase. */ - g_assert_cmphex(status0 & 0x40, !=, status1 & 0x40); + g_assert_cmphex(status0 & dq6, ==, ~status1 & dq6);/* Wait for erase to complete. */ -clock_step_next (); +qtest_clock_step_next (c->qtest);/* Ensure DQ6 has stopped toggling. */ - g_assert_cmphex(flash_read(0), ==, flash_read(0)); + g_assert_cmphex(flash_read(c, 0), ==, flash_read(c, 0));/* Now the data should be valid. */ - g_assert_cmphex(flash_read(0), ==, 0xFFFF); + +for (uint32_t i =0 ; i < nb_sectors; ++i) { +uint64_t byte_addr = i * sector_len; + g_assert_cmphex(flash_read(c, byte_addr), ==, bank_mask(c)); + }/* Unlock bypass */ -unlock (); -flash_write (UNLOCK0_ADDR ,UNLOCK_BYPASS_CMD ); -bypass_program (0 ,0x0123 ); -bypass_program (2 ,0x4567 ); -bypass_program (4 ,0x89AB ); +unlock (c); +flash_cmd (c,UNLOCK0_ADDR ,UNLOCK_BYPASS_CMD ); +bypass_program (c,0 * c->bank_width,0x01 ); +bypass_program (c,1 * c->bank_width,0x23 ); +bypass_program (c,2 * c->bank_width,0x45 );/* * Test that bypass programming, unlike normal programming can use any * address for the PROGRAM_CMD. */ -flash_write (6 ,PROGRAM_CMD ); -flash_write (6 ,0xCDEF ); -wait_for_completion (6 ); -flash_write (0 ,UNLOCK_BYPASS_RESET_CMD ); -bypass_program (8 ,0x55AA );/* Should fail. */ - g_assert_cmphex(flash_read(0), ==, 0x0123); - g_assert_cmphex(flash_read(2), ==, 0x4567); - g_assert_cmphex(flash_read(4), ==, 0x89AB); - g_assert_cmphex(flash_read(6), ==, 0xCDEF); - g_assert_cmphex(flash_read(8), ==, 0xFFFF); +flash_cmd (c,FLASH_ADDR (3 * c->bank_width),PROGRAM_CMD ); +flash_write (c,3 * c->bank_width,0x67 ); +wait_for_completion (c,3 * c->bank_width); +flash_cmd (c,FLASH_ADDR (0 ),UNLOCK_BYPASS_RESET_CMD ); +bypass_program (c,4 * c->bank_width,0x89 );/* Should fail. */ + g_assert_cmphex(flash_read(c, 0 * c->bank_width), ==, 0x01); + g_assert_cmphex(flash_read(c, 1 * c->bank_width), ==, 0x23); + g_assert_cmphex(flash_read(c, 2 * c->bank_width), ==, 0x45); + g_assert_cmphex(flash_read(c, 3 * c->bank_width), ==, 0x67); + g_assert_cmphex(flash_read(c, 4 * c->bank_width), ==, bank_mask(c));/* Test ignored high order bits of address. */ -flash_write (FLASH_WIDTH *0x5555 ,UNLOCK0_CMD ); -flash_write (FLASH_WIDTH *0x2AAA ,UNLOCK1_CMD ); -flash_write (FLASH_WIDTH *0x5555 ,AUTOSELECT_CMD ); - g_assert_cmpint(flash_read(FLASH_WIDTH * 0x0000), ==, 0x00BF); - g_assert_cmpint(flash_read(FLASH_WIDTH * 0x0001), ==, 0x236D); -reset (); +flash_cmd (c,FLASH_ADDR (0x5555 ),UNLOCK0_CMD ); +flash_cmd (c,FLASH_ADDR (0x2AAA ),UNLOCK1_CMD ); +flash_cmd (c,FLASH_ADDR (0x5555 ),AUTOSELECT_CMD ); + g_assert_cmphex(flash_query(c, FLASH_ADDR(0)), ==, replicate(c, 0xBF)); +reset (c); -qtest_quit (global_qtest); +qtest_quit (qtest); }static void cleanup (void *opaque)@@ -206,6 +355,17 @@ static void cleanup(void *opaque)unlink (image_path); } +/* +* XXX: Tests are limited to bank_width = 2 for now because that's what +* hw/arm/musicpal.c has. +*/ +static const FlashConfig configuration[] = { +/* One x16 device. */ + { + .bank_width =2 , + }, +}; +int main (int argc,char **argv) {int fd =mkstemp (image_path);@@ -214,19 +374,27 @@ int main(int argc, char **argv) strerror(errno));exit (EXIT_FAILURE ); } -if (ftruncate (fd,8 *1024 *1024 ) <0 ) { +if (ftruncate (fd,FLASH_SIZE ) <0 ) {int error_code = errno;close (fd);unlink (image_path); -g_printerr ("Failed to truncate file %s to 8 MB: %s\n" , image_path, -strerror (error_code)); +g_printerr ("Failed to truncate file %s to %u MB: %s\n" , image_path, +FLASH_SIZE ,strerror (error_code));exit (EXIT_FAILURE ); }close (fd);qtest_add_abrt_handler (cleanup,NULL );g_test_init (&argc, &argv,NULL ); -qtest_add_func ("pflash-cfi02" , test_flash); + +size_t nb_configurations =sizeof configuration /sizeof configuration[0 ]; +for (size_t i =0 ; i < nb_configurations; ++i) { +const FlashConfig *config = &configuration[i]; +char *path =g_strdup_printf ("pflash-cfi02/%d" , + config->bank_width); +qtest_add_data_func (path, config, test_flash); +g_free (path); + }int result =g_test_run ();cleanup (NULL );return result; --2.20.1
PATCH v5 14/28 hw/block/pflash_cfi02: Remove pointless local variable
In reply to Philippe Mathieu-DaudéWe can directly use pfl->total_len, remove the local 'chip_len' variable.
Message-Id: <[email protected]>
--- hw/block/pflash_cfi02.c | 14 ++++++-------- 1 file changed, 6 insertions(+), 8 deletions(-)
hw/block/pflash_cfi02.c +6 -8
@@ -409,7 +409,7 @@ static void pflash_write(void *opaque, hwaddr offset, uint64_t value,/* Chip erase */ DPRINTF ("%s: start chip erase\n" , __func__);if (!pfl->ro) { -memset (pfl->storage,0xFF , pfl->chip_len); +memset (pfl->storage,0xff , pfl->chip_len);pflash_update (pfl,0 , pfl->chip_len); }set_dq7 (pfl,0x00 );
@@ -490,7 +490,6 @@ static const MemoryRegionOps pflash_cfi02_ops = {static void pflash_cfi02_realize (DeviceState *dev,Error **errp) {PFlashCFI02 *pfl =PFLASH_CFI02 (dev); -uint32_t chip_len;int ret;Error *local_err =NULL ;
@@ -507,18 +506,17 @@ static void pflash_cfi02_realize(DeviceState *dev, Error **errp)return ; } - chip_len = pfl->sector_len * pfl->nb_blocs; + pfl->chip_len = pfl->sector_len * pfl->nb_blocs;memory_region_init_rom_device (&pfl->orig_mem,OBJECT (pfl), &pflash_cfi02_ops, pfl, pfl->name, - chip_len, &local_err); + pfl->chip_len, &local_err);if (local_err) {error_propagate (errp, local_err);return ; } pfl->storage =memory_region_get_ram_ptr (&pfl->orig_mem); - pfl->chip_len = chip_len;if (pfl->blk) {uint64_t perm;
@@ -533,8 +531,8 @@ static void pflash_cfi02_realize(DeviceState *dev, Error **errp) }if (pfl->blk) { -if (!blk_check_size_and_read_all (pfl->blk, pfl->storage, chip_len, - errp)) { +if (!blk_check_size_and_read_all (pfl->blk, pfl->storage, + pfl->chip_len, errp)) {vmstate_unregister_ram (&pfl->orig_mem,DEVICE (pfl));return ; }
@@ -594,7 +592,7 @@ static void pflash_cfi02_realize(DeviceState *dev, Error **errp)/* Max timeout for chip erase */ pfl->cfi_table[0x26 ] =0x0D ;/* Device size */ - pfl->cfi_table[0x27 ] =ctz32 (chip_len); + pfl->cfi_table[0x27 ] =ctz32 (pfl->chip_len);/* Flash device interface (8 & 16 bits) */ pfl->cfi_table[0x28 ] =0x02 ; pfl->cfi_table[0x29 ] =0x00 ;
Signature · 1 line
2.20.1
Re: [Qemu-devel] [PATCH v5 14/28] hw/block/pflash_cfi02: Remove pointless local variable
Quoted 8 lines · Philippe Mathieu-Daudé
We can directly use
pfl->total_len, remove the local 'chip_len' variable.Signed-off-by Stephen Checkoway <[email protected]>Message-Id: <[email protected]>
[PMD: Extracted from bigger patch]Signed-off-by Philippe Mathieu-Daudé <[email protected]>
Alistair
Quoted 70 lines
--- hw/block/pflash_cfi02.c | 14 ++++++-------- 1 file changed, 6 insertions(+), 8 deletions(-)hw/block/pflash_cfi02.c +6
-9@@ -409,7 +409,7 @@ static void pflash_write(void *opaque, hwaddr offset, uint64_t value,/* Chip erase */ DPRINTF ("%s: start chip erase\n" , __func__);if (!pfl->ro) { -memset (pfl->storage,0xFF , pfl->chip_len); +memset (pfl->storage,0xff , pfl->chip_len);pflash_update (pfl,0 , pfl->chip_len); }set_dq7 (pfl,0x00 );@@ -490,7 +490,6 @@ static const MemoryRegionOps pflash_cfi02_ops = {static void pflash_cfi02_realize (DeviceState *dev,Error **errp) {PFlashCFI02 *pfl =PFLASH_CFI02 (dev); -uint32_t chip_len;int ret;Error *local_err =NULL ;@@ -507,18 +506,17 @@ static void pflash_cfi02_realize(DeviceState *dev, Error **errp)return ; } - chip_len = pfl->sector_len * pfl->nb_blocs; + pfl->chip_len = pfl->sector_len * pfl->nb_blocs;memory_region_init_rom_device (&pfl->orig_mem,OBJECT (pfl), &pflash_cfi02_ops, pfl, pfl->name, - chip_len, &local_err); + pfl->chip_len, &local_err);if (local_err) {error_propagate (errp, local_err);return ; } pfl->storage =memory_region_get_ram_ptr (&pfl->orig_mem); - pfl->chip_len = chip_len;if (pfl->blk) {uint64_t perm;@@ -533,8 +531,8 @@ static void pflash_cfi02_realize(DeviceState *dev, Error **errp) }if (pfl->blk) { -if (!blk_check_size_and_read_all (pfl->blk, pfl->storage, chip_len, - errp)) { +if (!blk_check_size_and_read_all (pfl->blk, pfl->storage, + pfl->chip_len, errp)) {vmstate_unregister_ram (&pfl->orig_mem,DEVICE (pfl));return ; }@@ -594,7 +592,7 @@ static void pflash_cfi02_realize(DeviceState *dev, Error **errp)/* Max timeout for chip erase */ pfl->cfi_table[0x26 ] =0x0D ;/* Device size */ - pfl->cfi_table[0x27 ] =ctz32 (chip_len); + pfl->cfi_table[0x27 ] =ctz32 (pfl->chip_len);/* Flash device interface (8 & 16 bits) */ pfl->cfi_table[0x28 ] =0x02 ; pfl->cfi_table[0x29 ] =0x00 ; --2.20.1
PATCH v5 15/28 hw/block/pflash_cfi02: Document the current CFI values
In reply to Philippe Mathieu-DaudéMessage-Id: <[email protected]>
--- hw/block/pflash_cfi02.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-)
hw/block/pflash_cfi02.c +10 -1
@@ -550,6 +550,7 @@ static void pflash_cfi02_realize(DeviceState *dev, Error **errp) pfl->wcycle =0 ; pfl->cmd =0 ; pfl->status =0 ; +/* Hardcoded CFI table (mostly from SG29 Spansion flash) */ /* Standard "QRY" string */ pfl->cfi_table[0x10 ] ='Q' ;
@@ -575,7 +576,7 @@ static void pflash_cfi02_realize(DeviceState *dev, Error **errp) pfl->cfi_table[0x1D ] =0x00 ;/* Vpp max (no Vpp pin) */ pfl->cfi_table[0x1E ] =0x00 ; -/* Reserved */ +/* Timeout per single byte/word write (128 ms) */ pfl->cfi_table[0x1F ] =0x07 ;/* Timeout for min size buffer write (NA) */ pfl->cfi_table[0x20 ] =0x00 ;
@@ -614,17 +615,25 @@ static void pflash_cfi02_realize(DeviceState *dev, Error **errp) pfl->cfi_table[0x32 ] ='R' ; pfl->cfi_table[0x33 ] ='I' ; +/* Extended version 1.0 */ pfl->cfi_table[0x34 ] ='1' ; pfl->cfi_table[0x35 ] ='0' ; +/* Address sensitive unlock required. */ pfl->cfi_table[0x36 ] =0x00 ; +/* Erase suspend not supported. */ pfl->cfi_table[0x37 ] =0x00 ; +/* Sector protect not supported. */ pfl->cfi_table[0x38 ] =0x00 ; +/* Temporary sector unprotect not supported. */ pfl->cfi_table[0x39 ] =0x00 ; +/* Sector protect/unprotect scheme. */ pfl->cfi_table[0x3a ] =0x00 ; +/* Simultaneous operation not supported. */ pfl->cfi_table[0x3b ] =0x00 ; +/* Burst mode not supported. */ pfl->cfi_table[0x3c ] =0x00 ; }
Signature · 1 line
2.20.1
Re: [Qemu-devel] [PATCH v5 15/28] hw/block/pflash_cfi02: Document the current CFI values
Quoted 5 lines · Philippe Mathieu-Daudé
Signed-off-by Stephen Checkoway <[email protected]>Message-Id: <[email protected]>
[PMD: Extracted from bigger patch]Signed-off-by Philippe Mathieu-Daudé <[email protected]>
Alistair
Quoted 55 lines
--- hw/block/pflash_cfi02.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-)hw/block/pflash_cfi02.c +10
-2@@ -550,6 +550,7 @@ static void pflash_cfi02_realize(DeviceState *dev, Error **errp) pfl->wcycle =0 ; pfl->cmd =0 ; pfl->status =0 ; +/* Hardcoded CFI table (mostly from SG29 Spansion flash) */ /* Standard "QRY" string */ pfl->cfi_table[0x10 ] ='Q' ;@@ -575,7 +576,7 @@ static void pflash_cfi02_realize(DeviceState *dev, Error **errp) pfl->cfi_table[0x1D ] =0x00 ;/* Vpp max (no Vpp pin) */ pfl->cfi_table[0x1E ] =0x00 ; -/* Reserved */ +/* Timeout per single byte/word write (128 ms) */ pfl->cfi_table[0x1F ] =0x07 ;/* Timeout for min size buffer write (NA) */ pfl->cfi_table[0x20 ] =0x00 ;@@ -614,17 +615,25 @@ static void pflash_cfi02_realize(DeviceState *dev, Error **errp) pfl->cfi_table[0x32 ] ='R' ; pfl->cfi_table[0x33 ] ='I' ; +/* Extended version 1.0 */ pfl->cfi_table[0x34 ] ='1' ; pfl->cfi_table[0x35 ] ='0' ; +/* Address sensitive unlock required. */ pfl->cfi_table[0x36 ] =0x00 ; +/* Erase suspend not supported. */ pfl->cfi_table[0x37 ] =0x00 ; +/* Sector protect not supported. */ pfl->cfi_table[0x38 ] =0x00 ; +/* Temporary sector unprotect not supported. */ pfl->cfi_table[0x39 ] =0x00 ; +/* Sector protect/unprotect scheme. */ pfl->cfi_table[0x3a ] =0x00 ; +/* Simultaneous operation not supported. */ pfl->cfi_table[0x3b ] =0x00 ; +/* Burst mode not supported. */ pfl->cfi_table[0x3c ] =0x00 ; } --2.20.1
PATCH v5 16/28 hw/block/pflash_cfi02: Hold the PRI table offset in a variable
In reply to Philippe Mathieu-DaudéManufacturers are allowed to move the PRI table, this is why the offset is queryable via fixed offsets 0x15/0x16.
Add a variable to hold the offset, so it will be easier to later move the PRI table.
--- hw/block/pflash_cfi02.c | 31 +++++++++++++++++-------------- 1 file changed, 17 insertions(+), 14 deletions(-)
hw/block/pflash_cfi02.c +17 -14
@@ -552,6 +552,7 @@ static void pflash_cfi02_realize(DeviceState *dev, Error **errp) pfl->status =0 ;/* Hardcoded CFI table (mostly from SG29 Spansion flash) */ +const uint16_t pri_ofs =0x31 ;/* Standard "QRY" string */ pfl->cfi_table[0x10 ] ='Q' ; pfl->cfi_table[0x11 ] ='R' ;
@@ -560,8 +561,8 @@ static void pflash_cfi02_realize(DeviceState *dev, Error **errp) pfl->cfi_table[0x13 ] =0x02 ; pfl->cfi_table[0x14 ] =0x00 ;/* Primary extended table address */ - pfl->cfi_table[0x15 ] =0x31 ; - pfl->cfi_table[0x16 ] =0x00 ; + pfl->cfi_table[0x15 ] = pri_ofs; + pfl->cfi_table[0x16 ] = pri_ofs >>8 ;/* Alternate command set (none) */ pfl->cfi_table[0x17 ] =0x00 ; pfl->cfi_table[0x18 ] =0x00 ;
@@ -609,32 +610,34 @@ static void pflash_cfi02_realize(DeviceState *dev, Error **errp) pfl->cfi_table[0x2E ] = (pfl->nb_blocs -1 ) >>8 ; pfl->cfi_table[0x2F ] = pfl->sector_len >>8 ; pfl->cfi_table[0x30 ] = pfl->sector_len >>16 ; +assert (0x30 < pri_ofs);/* Extended */ - pfl->cfi_table[0x31 ] ='P' ; - pfl->cfi_table[0x32 ] ='R' ; - pfl->cfi_table[0x33 ] ='I' ; + pfl->cfi_table[0x00 + pri_ofs] ='P' ; + pfl->cfi_table[0x01 + pri_ofs] ='R' ; + pfl->cfi_table[0x02 + pri_ofs] ='I' ;/* Extended version 1.0 */ - pfl->cfi_table[0x34 ] ='1' ; - pfl->cfi_table[0x35 ] ='0' ; + pfl->cfi_table[0x03 + pri_ofs] ='1' ; + pfl->cfi_table[0x04 + pri_ofs] ='0' ;/* Address sensitive unlock required. */ - pfl->cfi_table[0x36 ] =0x00 ; + pfl->cfi_table[0x05 + pri_ofs] =0x00 ;/* Erase suspend not supported. */ - pfl->cfi_table[0x37 ] =0x00 ; + pfl->cfi_table[0x06 + pri_ofs] =0x00 ;/* Sector protect not supported. */ - pfl->cfi_table[0x38 ] =0x00 ; + pfl->cfi_table[0x07 + pri_ofs] =0x00 ;/* Temporary sector unprotect not supported. */ - pfl->cfi_table[0x39 ] =0x00 ; + pfl->cfi_table[0x08 + pri_ofs] =0x00 ;/* Sector protect/unprotect scheme. */ - pfl->cfi_table[0x3a ] =0x00 ; + pfl->cfi_table[0x09 + pri_ofs] =0x00 ;/* Simultaneous operation not supported. */ - pfl->cfi_table[0x3b ] =0x00 ; + pfl->cfi_table[0x0a + pri_ofs] =0x00 ;/* Burst mode not supported. */ - pfl->cfi_table[0x3c ] =0x00 ; + pfl->cfi_table[0x0b + pri_ofs] =0x00 ; +assert (0x0b + pri_ofs <ARRAY_SIZE (pfl->cfi_table)); }static Property pflash_cfi02_properties[] = {
Signature · 1 line
2.20.1
Re: [Qemu-devel] [PATCH v5 16/28] hw/block/pflash_cfi02: Hold the PRI table offset in a variable
Quoted 7 lines · Philippe Mathieu-Daudé
Manufacturers are allowed to move the PRI table, this is why the offset is queryable via fixed offsets 0x15/0x16.
Add a variable to hold the offset, so it will be easier to later move the PRI table.Signed-off-by Philippe Mathieu-Daudé <[email protected]>
Alistair
Quoted 78 lines
--- hw/block/pflash_cfi02.c | 31 +++++++++++++++++-------------- 1 file changed, 17 insertions(+), 14 deletions(-)hw/block/pflash_cfi02.c +17
-15@@ -552,6 +552,7 @@ static void pflash_cfi02_realize(DeviceState *dev, Error **errp) pfl->status =0 ;/* Hardcoded CFI table (mostly from SG29 Spansion flash) */ +const uint16_t pri_ofs =0x31 ;/* Standard "QRY" string */ pfl->cfi_table[0x10 ] ='Q' ; pfl->cfi_table[0x11 ] ='R' ;@@ -560,8 +561,8 @@ static void pflash_cfi02_realize(DeviceState *dev, Error **errp) pfl->cfi_table[0x13 ] =0x02 ; pfl->cfi_table[0x14 ] =0x00 ;/* Primary extended table address */ - pfl->cfi_table[0x15 ] =0x31 ; - pfl->cfi_table[0x16 ] =0x00 ; + pfl->cfi_table[0x15 ] = pri_ofs; + pfl->cfi_table[0x16 ] = pri_ofs >>8 ;/* Alternate command set (none) */ pfl->cfi_table[0x17 ] =0x00 ; pfl->cfi_table[0x18 ] =0x00 ;@@ -609,32 +610,34 @@ static void pflash_cfi02_realize(DeviceState *dev, Error **errp) pfl->cfi_table[0x2E ] = (pfl->nb_blocs -1 ) >>8 ; pfl->cfi_table[0x2F ] = pfl->sector_len >>8 ; pfl->cfi_table[0x30 ] = pfl->sector_len >>16 ; +assert (0x30 < pri_ofs);/* Extended */ - pfl->cfi_table[0x31 ] ='P' ; - pfl->cfi_table[0x32 ] ='R' ; - pfl->cfi_table[0x33 ] ='I' ; + pfl->cfi_table[0x00 + pri_ofs] ='P' ; + pfl->cfi_table[0x01 + pri_ofs] ='R' ; + pfl->cfi_table[0x02 + pri_ofs] ='I' ;/* Extended version 1.0 */ - pfl->cfi_table[0x34 ] ='1' ; - pfl->cfi_table[0x35 ] ='0' ; + pfl->cfi_table[0x03 + pri_ofs] ='1' ; + pfl->cfi_table[0x04 + pri_ofs] ='0' ;/* Address sensitive unlock required. */ - pfl->cfi_table[0x36 ] =0x00 ; + pfl->cfi_table[0x05 + pri_ofs] =0x00 ;/* Erase suspend not supported. */ - pfl->cfi_table[0x37 ] =0x00 ; + pfl->cfi_table[0x06 + pri_ofs] =0x00 ;/* Sector protect not supported. */ - pfl->cfi_table[0x38 ] =0x00 ; + pfl->cfi_table[0x07 + pri_ofs] =0x00 ;/* Temporary sector unprotect not supported. */ - pfl->cfi_table[0x39 ] =0x00 ; + pfl->cfi_table[0x08 + pri_ofs] =0x00 ;/* Sector protect/unprotect scheme. */ - pfl->cfi_table[0x3a ] =0x00 ; + pfl->cfi_table[0x09 + pri_ofs] =0x00 ;/* Simultaneous operation not supported. */ - pfl->cfi_table[0x3b ] =0x00 ; + pfl->cfi_table[0x0a + pri_ofs] =0x00 ;/* Burst mode not supported. */ - pfl->cfi_table[0x3c ] =0x00 ; + pfl->cfi_table[0x0b + pri_ofs] =0x00 ; +assert (0x0b + pri_ofs <ARRAY_SIZE (pfl->cfi_table)); }static Property pflash_cfi02_properties[] = { --2.20.1
PATCH v5 17/28 hw/block/pflash_cfi02: Document 'Page Mode' operations are not supported
In reply to Philippe Mathieu-DaudéThe 'page mode' feature entry was implicitly set as zero (not supported). Document it exists, so we won't discard it if we squeeze the CFI table.
Message-Id: <[email protected]>
--- hw/block/pflash_cfi02.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
hw/block/pflash_cfi02.c +3 -1
@@ -637,7 +637,9 @@ static void pflash_cfi02_realize(DeviceState *dev, Error **errp) pfl->cfi_table[0x0a + pri_ofs] =0x00 ;/* Burst mode not supported. */ pfl->cfi_table[0x0b + pri_ofs] =0x00 ; -assert (0x0b + pri_ofs <ARRAY_SIZE (pfl->cfi_table)); +/* Page mode not supported. */ + pfl->cfi_table[0x0c + pri_ofs] =0x00 ; +assert (0x0c + pri_ofs <ARRAY_SIZE (pfl->cfi_table)); }static Property pflash_cfi02_properties[] = {
Signature · 1 line
2.20.1
Re: [Qemu-devel] [PATCH v5 17/28] hw/block/pflash_cfi02: Document 'Page Mode' operations are not supported
Quoted 9 lines · Philippe Mathieu-Daudé
The 'page mode' feature entry was implicitly set as zero (not supported). Document it exists, so we won't discard it if we squeeze the CFI table.
Signed-off-by Stephen Checkoway <[email protected]>Message-Id: <[email protected]>
[PMD: Extracted from bigger patch]Signed-off-by Philippe Mathieu-Daudé <[email protected]>
Alistair
Quoted 23 lines
--- hw/block/pflash_cfi02.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)hw/block/pflash_cfi02.c +3
-2@@ -637,7 +637,9 @@ static void pflash_cfi02_realize(DeviceState *dev, Error **errp) pfl->cfi_table[0x0a + pri_ofs] =0x00 ;/* Burst mode not supported. */ pfl->cfi_table[0x0b + pri_ofs] =0x00 ; -assert (0x0b + pri_ofs <ARRAY_SIZE (pfl->cfi_table)); +/* Page mode not supported. */ + pfl->cfi_table[0x0c + pri_ofs] =0x00 ; +assert (0x0c + pri_ofs <ARRAY_SIZE (pfl->cfi_table)); }static Property pflash_cfi02_properties[] = { --2.20.1
PATCH v5 18/28 hw/block/pflash_cfi02: Implement nonuniform sector sizes
In reply to Philippe Mathieu-DaudéFrom: Stephen Checkoway <[email protected]>
Some flash chips support sectors of different sizes. For example, the AMD AM29LV160DT has 31 64 kB sectors, one 32 kB sector, two 8 kB sectors, and a 16 kB sector, in that order. The AM29LV160DB has those in the reverse order.
The num-blocks and sector-length properties work exactly as they did
before: a flash device with uniform sector lengths. To get non-uniform sector lengths for up to four regions, the following properties may be set
- region 0. num-blocks0 and sector-length0;
- region 1. num-blocks1 and sector-length1;
- region 2. num-blocks2 and sector-length2; and
- region 3. num-blocks3 and sector-length3.
If the uniform and nonuniform properties are set, then both must specify a flash device with the same total size. It would be better to disallow both being set, or make num-blocks0 and sector-length0 alias num-blocks and sector-length, but that would make testing currently impossible.
Message-Id: <[email protected]>
--- hw/block/pflash_cfi02.c | 141 +++++++++++++++++++++++++++------- tests/pflash-cfi02-test.c | 155 ++++++++++++++++++++++++++++---------- 2 files changed, 231 insertions(+), 65 deletions(-)
hw/block/pflash_cfi02.c +114 -27
@@ -29,7 +29,6 @@* - CFI queries * * It does not support flash interleaving. -* It does not implement boot blocs with reduced size * It does not implement software data protection as found in many real chips * It does not implement erase suspend/resume commands * It does not implement multiple sectors erase
@@ -57,6 +56,13 @@ do { \#define PFLASH_LAZY_ROMD_THRESHOLD 42 +/* +* The size of the cfi_table indirectly depends on this and the start of the +* PRI table directly depends on it. 4 is the maximum size (and also what +* seems common) without changing the PRT table address. +*/ +#define PFLASH_MAX_ERASE_REGIONS 4 +/* Special write cycles for CFI queries. */ enum {WCYCLE_CFI =7 ,
@@ -68,8 +74,10 @@ struct PFlashCFI02 {/*< public >*/ BlockBackend *blk; -uint32_t sector_len; -uint32_t nb_blocs; +uint32_t uniform_nb_blocs; +uint32_t uniform_sector_len; +uint32_t nb_blocs[PFLASH_MAX_ERASE_REGIONS ]; +uint32_t sector_len[PFLASH_MAX_ERASE_REGIONS ];uint32_t chip_len;uint8_t mappings;uint8_t width;
@@ -86,7 +94,7 @@ struct PFlashCFI02 {uint16_t ident3;uint16_t unlock_addr0;uint16_t unlock_addr1; -uint8_t cfi_table[0x52 ]; +uint8_t cfi_table[0x4d ];QEMUTimer timer;/* The device replicates the flash memory across its memory space. Emulate * that by having a container (.mem) filled with an array of aliases
@@ -177,6 +185,25 @@ static uint64_t pflash_data_read(PFlashCFI02 *pfl, hwaddr offset,return ret; } +/* +* offset should be a byte offset of the QEMU device and _not_ a device +* offset. +*/ +static uint32_t pflash_sector_len (PFlashCFI02 *pfl,hwaddr offset) +{ +assert (offset < pfl->chip_len); +int nb_regions = pfl->cfi_table[0x2C ]; +hwaddr addr =0 ; +for (int i =0 ; i < nb_regions; ++i) { +uint64_t region_size = (uint64_t )pfl->nb_blocs[i] * pfl->sector_len[i]; +if (addr <= offset && offset < addr + region_size) { +return pfl->sector_len[i]; + } + addr += region_size; + } +abort (); +} +static uint64_t pflash_read (void *opaque,hwaddr offset,unsigned int width) {PFlashCFI02 *pfl = opaque;
@@ -191,10 +218,11 @@ static uint64_t pflash_read(void *opaque, hwaddr offset, unsigned int width) } offset &= pfl->chip_len -1 ; boff = offset &0xFF ; -if (pfl->width ==2 ) +if (pfl->width ==2 ) { boff = boff >>1 ; -else if (pfl->width ==4 ) + }else if (pfl->width ==4 ) { boff = boff >>2 ; + }switch (pfl->cmd) {default :/* This should never happen : reset state & treat it as a read*/
@@ -273,6 +301,7 @@ static void pflash_write(void *opaque, hwaddr offset, uint64_t value,hwaddr boff;uint8_t *p;uint8_t cmd; +uint32_t sector_len;trace_pflash_io_write (offset, width, width <<1 , value, pfl->wcycle); cmd = value;
@@ -282,10 +311,11 @@ static void pflash_write(void *opaque, hwaddr offset, uint64_t value, offset &= pfl->chip_len -1 ; boff = offset; -if (pfl->width ==2 ) +if (pfl->width ==2 ) { boff = boff >>1 ; -else if (pfl->width ==4 ) + }else if (pfl->width ==4 ) { boff = boff >>2 ; + }/* Only the least-significant 11 bits are used in most cases. */ boff &=0x7FF ;switch (pfl->wcycle) {
@@ -420,12 +450,14 @@ static void pflash_write(void *opaque, hwaddr offset, uint64_t value,case 0x30 :/* Sector erase */ p = pfl->storage; - offset &= ~(pfl->sector_len -1 ); -DPRINTF ("%s: start sector erase at " TARGET_FMT_plx"\n" , __func__, - offset); + sector_len =pflash_sector_len (pfl, offset); + offset &= ~(sector_len -1 ); +DPRINTF ("%s: start sector erase at %0*" PRIx64"-%0*" PRIx64"\n" , + __func__, pfl->width *2 , offset, + pfl->width *2 , offset + sector_len -1 );if (!pfl->ro) { -memset (p + offset,0xFF , pfl->sector_len); -pflash_update (pfl, offset, pfl->sector_len); +memset (p + offset,0xff , sector_len); +pflash_update (pfl, offset, sector_len); }set_dq7 (pfl,0x00 );/* Let's wait 1/2 second before sector erase is done */
@@ -493,11 +525,11 @@ static void pflash_cfi02_realize(DeviceState *dev, Error **errp)int ret;Error *local_err =NULL ; -if (pfl->sector_len ==0 ) { +if (pfl->uniform_sector_len ==0 && pfl->sector_len[0 ] ==0 ) {error_setg (errp,"attribute \"sector-length\" not specified or zero." );return ; } -if (pfl->nb_blocs ==0 ) { +if (pfl->uniform_nb_blocs ==0 && pfl->nb_blocs[0 ] ==0 ) {error_setg (errp,"attribute \"num-blocks\" not specified or zero." );return ; }
@@ -506,7 +538,51 @@ static void pflash_cfi02_realize(DeviceState *dev, Error **errp)return ; } - pfl->chip_len = pfl->sector_len * pfl->nb_blocs; +int nb_regions; + pfl->chip_len =0 ; +for (nb_regions =0 ; nb_regions <PFLASH_MAX_ERASE_REGIONS ; ++nb_regions) { +if (pfl->nb_blocs[nb_regions] ==0 ) { +break ; + } +uint64_t sector_len_per_device = pfl->sector_len[nb_regions]; + +/* +* The size of each flash sector must be a power of 2 and it must be +* aligned at the same power of 2. +*/ +if (sector_len_per_device &0xff || + sector_len_per_device >= (1 <<24 ) || + !is_power_of_2 (sector_len_per_device)) + { +error_setg (errp,"unsupported configuration: " +"sector length[%d] per device = %" PRIx64"." , + nb_regions, sector_len_per_device); +return ; + } +if (pfl->chip_len & (sector_len_per_device -1 )) { +error_setg (errp,"unsupported configuration: " +"flash region %d not correctly aligned." , + nb_regions); +return ; + } + + pfl->chip_len += (uint64_t )pfl->sector_len[nb_regions] * + pfl->nb_blocs[nb_regions]; + } + +uint64_t uniform_len = (uint64_t )pfl->uniform_nb_blocs * + pfl->uniform_sector_len; +if (nb_regions ==0 ) { + nb_regions =1 ; + pfl->nb_blocs[0 ] = pfl->uniform_nb_blocs; + pfl->sector_len[0 ] = pfl->uniform_sector_len; + pfl->chip_len = uniform_len; + }else if (uniform_len !=0 && uniform_len != pfl->chip_len) { +error_setg (errp,"\"num-blocks\"*\"sector-length\" " +"different from \"num-blocks0\"*\'sector-length0\" + ... + " +"\"num-blocks3\"*\"sector-length3\"" ); +return ; + } memory_region_init_rom_device(&pfl->orig_mem, OBJECT(pfl), &pflash_cfi02_ops, pfl, pfl->name,
@@ -552,7 +628,7 @@ static void pflash_cfi02_realize(DeviceState *dev, Error **errp) pfl->status =0 ;/* Hardcoded CFI table (mostly from SG29 Spansion flash) */ -const uint16_t pri_ofs =0x31 ; +const uint16_t pri_ofs =0x40 ;/* Standard "QRY" string */ pfl->cfi_table[0x10 ] ='Q' ; pfl->cfi_table[0x11 ] ='R' ;
@@ -603,14 +679,17 @@ static void pflash_cfi02_realize(DeviceState *dev, Error **errp)// pfl->cfi_table[0x2A] = 0x05; pfl->cfi_table[0x2A ] =0x00 ; pfl->cfi_table[0x2B ] =0x00 ; -/* Number of erase block regions (uniform) */ - pfl->cfi_table[0x2C ] =0x01 ; -/* Erase block region 1 */ - pfl->cfi_table[0x2D ] = pfl->nb_blocs -1 ; - pfl->cfi_table[0x2E ] = (pfl->nb_blocs -1 ) >>8 ; - pfl->cfi_table[0x2F ] = pfl->sector_len >>8 ; - pfl->cfi_table[0x30 ] = pfl->sector_len >>16 ; -assert (0x30 < pri_ofs); +/* Number of erase block regions */ + pfl->cfi_table[0x2c ] = nb_regions; +/* Erase block regions */ +for (int i =0 ; i < nb_regions; ++i) { +uint32_t sector_len_per_device = pfl->sector_len[i]; + pfl->cfi_table[0x2d +4 * i] = pfl->nb_blocs[i] -1 ; + pfl->cfi_table[0x2e +4 * i] = (pfl->nb_blocs[i] -1 ) >>8 ; + pfl->cfi_table[0x2f +4 * i] = sector_len_per_device >>8 ; + pfl->cfi_table[0x30 +4 * i] = sector_len_per_device >>16 ; + } +assert (0x2c +4 * nb_regions < pri_ofs);/* Extended */ pfl->cfi_table[0x00 + pri_ofs] ='P' ;
@@ -644,8 +723,16 @@ static void pflash_cfi02_realize(DeviceState *dev, Error **errp)static Property pflash_cfi02_properties[] = {DEFINE_PROP_DRIVE ("drive" , PFlashCFI02, blk), -DEFINE_PROP_UINT32 ("num-blocks" , PFlashCFI02, nb_blocs,0 ), -DEFINE_PROP_UINT32 ("sector-length" , PFlashCFI02, sector_len,0 ), +DEFINE_PROP_UINT32 ("num-blocks" , PFlashCFI02, uniform_nb_blocs,0 ), +DEFINE_PROP_UINT32 ("sector-length" , PFlashCFI02, uniform_sector_len,0 ), +DEFINE_PROP_UINT32 ("num-blocks0" , PFlashCFI02, nb_blocs[0 ],0 ), +DEFINE_PROP_UINT32 ("sector-length0" , PFlashCFI02, sector_len[0 ],0 ), +DEFINE_PROP_UINT32 ("num-blocks1" , PFlashCFI02, nb_blocs[1 ],0 ), +DEFINE_PROP_UINT32 ("sector-length1" , PFlashCFI02, sector_len[1 ],0 ), +DEFINE_PROP_UINT32 ("num-blocks2" , PFlashCFI02, nb_blocs[2 ],0 ), +DEFINE_PROP_UINT32 ("sector-length2" , PFlashCFI02, sector_len[2 ],0 ), +DEFINE_PROP_UINT32 ("num-blocks3" , PFlashCFI02, nb_blocs[3 ],0 ), +DEFINE_PROP_UINT32 ("sector-length3" , PFlashCFI02, sector_len[3 ],0 ),DEFINE_PROP_UINT8 ("width" , PFlashCFI02, width,0 ),DEFINE_PROP_UINT8 ("mappings" , PFlashCFI02, mappings,0 ),DEFINE_PROP_UINT8 ("big-endian" , PFlashCFI02, be,0 ),
tests/pflash-cfi02-test.c +117 -38
226 lines not on this page · raw message
Signature · 1 line
2.20.1
Re: [PATCH v5 18/28] hw/block/pflash_cfi02: Implement nonuniform sector sizes
Quoted 59 lines · Philippe Mathieu-Daudé
From: Stephen Checkoway <[email protected]>
Some flash chips support sectors of different sizes. For example, the AMD AM29LV160DT has 31 64 kB sectors, one 32 kB sector, two 8 kB sectors, and a 16 kB sector, in that order. The AM29LV160DB has those in the reverse order.
The
num-blocksandsector-lengthproperties work exactly as they did
before: a flash device with uniform sector lengths. To get non-uniform sector lengths for up to four regions, the following properties may be set
- region 0.num-blocks0andsector-length0;
- region 1.num-blocks1andsector-length1;
- region 2.num-blocks2andsector-length2; and
- region 3.num-blocks3andsector-length3.If the uniform and nonuniform properties are set, then both must specify a flash device with the same total size. It would be better to disallow both being set, or make
num-blocks0andsector-length0aliasnum-blocksandsector-length, but that would make testing currently impossible.Signed-off-by Stephen Checkoway <[email protected]>Acked-by Thomas Huth <[email protected]>Message-Id: <[email protected]>
[PMD: Rebased, add assert() on pri_offset]Signed-off-by Philippe Mathieu-Daudé <[email protected]>--- hw/block/pflash_cfi02.c | 141 +++++++++++++++++++++++++++------- tests/pflash-cfi02-test.c | 155 ++++++++++++++++++++++++++++---------- 2 files changed, 231 insertions(+), 65 deletions(-)hw/block/pflash_cfi02.c +7
-1@@ -29,7 +29,6 @@* - CFI queries * * It does not support flash interleaving. -* It does not implement boot blocs with reduced size * It does not implement software data protection as found in many real chips * It does not implement erase suspend/resume commands * It does not implement multiple sectors erase @@ -57,6 +56,13 @@ do { \#define PFLASH_LAZY_ROMD_THRESHOLD 42 +/* +* The size of the cfi_table indirectly depends on this and the start of the +* PRI table directly depends on it. 4 is the maximum size (and also what +* seems common) without changing the PRT table address. +*/ +#define PFLASH_MAX_ERASE_REGIONS 4 +/* Special write cycles for CFI queries. */ enum {WCYCLE_CFI =7 ,
hw/block/pflash_cfi02.c struct PFlashCFI02 { · line 80
Quoted 9 lines
hw/block/pflash_cfi02.c +4
-2@@ -68,8 +74,10 @@ struct PFlashCFI02 {/*< public >*/ BlockBackend *blk; -uint32_t sector_len; -uint32_t nb_blocs; +uint32_t uniform_nb_blocs; +uint32_t uniform_sector_len; +uint32_t nb_blocs[PFLASH_MAX_ERASE_REGIONS ]; +uint32_t sector_len[PFLASH_MAX_ERASE_REGIONS ];
I think we can drop the 'uniform' variables, and only use the indexed ones.
Quoted 13 lines
hw/block/pflash_cfi02.c +1
-1uint32_t chip_len;uint8_t mappings;uint8_t width;@@ -86,7 +94,7 @@ struct PFlashCFI02 {uint16_t ident3;uint16_t unlock_addr0;uint16_t unlock_addr1; -uint8_t cfi_table[0x52 ]; +uint8_t cfi_table[0x4d ];QEMUTimer timer;/* The device replicates the flash memory across its memory space. Emulate * that by having a container (.mem) filled with an array of aliases
hw/block/pflash_cfi02.c static uint64_t pflash_data_read(PFlashCFI02 *pfl, hwaddr offset, · line 192
Quoted 8 lines
hw/block/pflash_cfi02.c +5
-0@@ -177,6 +185,25 @@ static uint64_t pflash_data_read(PFlashCFI02 *pfl, hwaddr offset,return ret; } +/* +* offset should be a byte offset of the QEMU device and _not_ a device +* offset. +*/ +static uint32_t pflash_sector_len (PFlashCFI02 *pfl,hwaddr offset)
Hmm I'd rather have a more generic pflash_sector_index(pfl, offset).
Quoted 18 lines
hw/block/pflash_cfi02.c +14
-0+{ +assert (offset < pfl->chip_len); +int nb_regions = pfl->cfi_table[0x2C ]; +hwaddr addr =0 ; +for (int i =0 ; i < nb_regions; ++i) { +uint64_t region_size = (uint64_t )pfl->nb_blocs[i] * pfl->sector_len[i]; +if (addr <= offset && offset < addr + region_size) { +return pfl->sector_len[i]; + } + addr += region_size; + } +abort (); +} +static uint64_t pflash_read (void *opaque,hwaddr offset,unsigned int width) {PFlashCFI02 *pfl = opaque;
hw/block/pflash_cfi02.c static uint64_t pflash_read(void *opaque, hwaddr offset, unsigned int width) · line 225
Quoted 10 lines
hw/block/pflash_cfi02.c +3
-2@@ -191,10 +218,11 @@ static uint64_t pflash_read(void *opaque, hwaddr offset, unsigned int width) } offset &= pfl->chip_len -1 ; boff = offset &0xFF ; -if (pfl->width ==2 ) +if (pfl->width ==2 ) { boff = boff >>1 ; -else if (pfl->width ==4 ) + }else if (pfl->width ==4 ) { boff = boff >>2 ; + }
Simple style, ok.
Quoted 12 lines
hw/block/pflash_cfi02.c +1
-0switch (pfl->cmd) {default :/* This should never happen : reset state & treat it as a read*/ @@ -273,6 +301,7 @@ static void pflash_write(void *opaque, hwaddr offset, uint64_t value,hwaddr boff;uint8_t *p;uint8_t cmd; +uint32_t sector_len;trace_pflash_io_write (offset, width, width <<1 , value, pfl->wcycle); cmd = value;
hw/block/pflash_cfi02.c static void pflash_write(void *opaque, hwaddr offset, uint64_t value, · line 318
Quoted 10 lines
hw/block/pflash_cfi02.c +3
-2@@ -282,10 +311,11 @@ static void pflash_write(void *opaque, hwaddr offset, uint64_t value, offset &= pfl->chip_len -1 ; boff = offset; -if (pfl->width ==2 ) +if (pfl->width ==2 ) { boff = boff >>1 ; -else if (pfl->width ==4 ) + }else if (pfl->width ==4 ) { boff = boff >>2 ; + }
Style again.
Quoted 111 lines
hw/block/pflash_cfi02.c +55
-17/* Only the least-significant 11 bits are used in most cases. */ boff &=0x7FF ;switch (pfl->wcycle) {@@ -420,12 +450,14 @@ static void pflash_write(void *opaque, hwaddr offset, uint64_t value,case 0x30 :/* Sector erase */ p = pfl->storage; - offset &= ~(pfl->sector_len -1 ); -DPRINTF ("%s: start sector erase at " TARGET_FMT_plx"\n" , __func__, - offset); + sector_len =pflash_sector_len (pfl, offset); + offset &= ~(sector_len -1 ); +DPRINTF ("%s: start sector erase at %0*" PRIx64"-%0*" PRIx64"\n" , + __func__, pfl->width *2 , offset, + pfl->width *2 , offset + sector_len -1 );if (!pfl->ro) { -memset (p + offset,0xFF , pfl->sector_len); -pflash_update (pfl, offset, pfl->sector_len); +memset (p + offset,0xff , sector_len); +pflash_update (pfl, offset, sector_len); }set_dq7 (pfl,0x00 );/* Let's wait 1/2 second before sector erase is done */ @@ -493,11 +525,11 @@ static void pflash_cfi02_realize(DeviceState *dev, Error **errp)int ret;Error *local_err =NULL ; -if (pfl->sector_len ==0 ) { +if (pfl->uniform_sector_len ==0 && pfl->sector_len[0 ] ==0 ) {error_setg (errp,"attribute \"sector-length\" not specified or zero." );return ; } -if (pfl->nb_blocs ==0 ) { +if (pfl->uniform_nb_blocs ==0 && pfl->nb_blocs[0 ] ==0 ) {error_setg (errp,"attribute \"num-blocks\" not specified or zero." );return ; }@@ -506,7 +538,51 @@ static void pflash_cfi02_realize(DeviceState *dev, Error **errp)return ; } - pfl->chip_len = pfl->sector_len * pfl->nb_blocs; +int nb_regions; + pfl->chip_len =0 ; +for (nb_regions =0 ; nb_regions <PFLASH_MAX_ERASE_REGIONS ; ++nb_regions) { +if (pfl->nb_blocs[nb_regions] ==0 ) { +break ; + } +uint64_t sector_len_per_device = pfl->sector_len[nb_regions]; + +/* +* The size of each flash sector must be a power of 2 and it must be +* aligned at the same power of 2. +*/ +if (sector_len_per_device &0xff || + sector_len_per_device >= (1 <<24 ) || + !is_power_of_2 (sector_len_per_device)) + { +error_setg (errp,"unsupported configuration: " +"sector length[%d] per device = %" PRIx64"." , + nb_regions, sector_len_per_device); +return ; + } +if (pfl->chip_len & (sector_len_per_device -1 )) { +error_setg (errp,"unsupported configuration: " +"flash region %d not correctly aligned." , + nb_regions); +return ; + } + + pfl->chip_len += (uint64_t )pfl->sector_len[nb_regions] * + pfl->nb_blocs[nb_regions]; + } + +uint64_t uniform_len = (uint64_t )pfl->uniform_nb_blocs * + pfl->uniform_sector_len; +if (nb_regions ==0 ) { + nb_regions =1 ; + pfl->nb_blocs[0 ] = pfl->uniform_nb_blocs; + pfl->sector_len[0 ] = pfl->uniform_sector_len; + pfl->chip_len = uniform_len; + }else if (uniform_len !=0 && uniform_len != pfl->chip_len) { +error_setg (errp,"\"num-blocks\"*\"sector-length\" " +"different from \"num-blocks0\"*\'sector-length0\" + ... + " +"\"num-blocks3\"*\"sector-length3\"" ); +return ; + } memory_region_init_rom_device(&pfl->orig_mem, OBJECT(pfl), &pflash_cfi02_ops, pfl, pfl->name,@@ -552,7 +628,7 @@ static void pflash_cfi02_realize(DeviceState *dev, Error **errp) pfl->status =0 ;/* Hardcoded CFI table (mostly from SG29 Spansion flash) */ -const uint16_t pri_ofs =0x31 ; +const uint16_t pri_ofs =0x40 ;/* Standard "QRY" string */ pfl->cfi_table[0x10 ] ='Q' ; pfl->cfi_table[0x11 ] ='R' ;@@ -603,14 +679,17 @@ static void pflash_cfi02_realize(DeviceState *dev, Error **errp)// pfl->cfi_table[0x2A] = 0x05; pfl->cfi_table[0x2A ] =0x00 ; pfl->cfi_table[0x2B ] =0x00 ; -/* Number of erase block regions (uniform) */ - pfl->cfi_table[0x2C ] =0x01 ; -/* Erase block region 1 */ - pfl->cfi_table[0x2D ] = pfl->nb_blocs -1 ; - pfl->cfi_table[0x2E ] = (pfl->nb_blocs -1 ) >>8 ; - pfl->cfi_table[0x2F ] = pfl->sector_len >>8 ; - pfl->cfi_table[0x30 ] = pfl->sector_len >>16 ; -assert (0x30 < pri_ofs);
hw/block/pflash_cfi02.c static void pflash_cfi02_realize(DeviceState *dev, Error **errp) · line 691
Quoted 10 lines
hw/block/pflash_cfi02.c +10
-0+/* Number of erase block regions */ + pfl->cfi_table[0x2c ] = nb_regions; +/* Erase block regions */ +for (int i =0 ; i < nb_regions; ++i) { +uint32_t sector_len_per_device = pfl->sector_len[i]; + pfl->cfi_table[0x2d +4 * i] = pfl->nb_blocs[i] -1 ; + pfl->cfi_table[0x2e +4 * i] = (pfl->nb_blocs[i] -1 ) >>8 ; + pfl->cfi_table[0x2f +4 * i] = sector_len_per_device >>8 ; + pfl->cfi_table[0x30 +4 * i] = sector_len_per_device >>16 ; + }
OK.
Quoted 52 lines
hw/block/pflash_cfi02.c +11
-2+assert (0x2c +4 * nb_regions < pri_ofs);/* Extended */ pfl->cfi_table[0x00 + pri_ofs] ='P' ;@@ -644,8 +723,16 @@ static void pflash_cfi02_realize(DeviceState *dev, Error **errp)static Property pflash_cfi02_properties[] = {DEFINE_PROP_DRIVE ("drive" , PFlashCFI02, blk), -DEFINE_PROP_UINT32 ("num-blocks" , PFlashCFI02, nb_blocs,0 ), -DEFINE_PROP_UINT32 ("sector-length" , PFlashCFI02, sector_len,0 ), +DEFINE_PROP_UINT32 ("num-blocks" , PFlashCFI02, uniform_nb_blocs,0 ), +DEFINE_PROP_UINT32 ("sector-length" , PFlashCFI02, uniform_sector_len,0 ), +DEFINE_PROP_UINT32 ("num-blocks0" , PFlashCFI02, nb_blocs[0 ],0 ), +DEFINE_PROP_UINT32 ("sector-length0" , PFlashCFI02, sector_len[0 ],0 ), +DEFINE_PROP_UINT32 ("num-blocks1" , PFlashCFI02, nb_blocs[1 ],0 ), +DEFINE_PROP_UINT32 ("sector-length1" , PFlashCFI02, sector_len[1 ],0 ), +DEFINE_PROP_UINT32 ("num-blocks2" , PFlashCFI02, nb_blocs[2 ],0 ), +DEFINE_PROP_UINT32 ("sector-length2" , PFlashCFI02, sector_len[2 ],0 ), +DEFINE_PROP_UINT32 ("num-blocks3" , PFlashCFI02, nb_blocs[3 ],0 ), +DEFINE_PROP_UINT32 ("sector-length3" , PFlashCFI02, sector_len[3 ],0 ),DEFINE_PROP_UINT8 ("width" , PFlashCFI02, width,0 ),DEFINE_PROP_UINT8 ("mappings" , PFlashCFI02, mappings,0 ),DEFINE_PROP_UINT8 ("big-endian" , PFlashCFI02, be,0 ),tests/pflash-cfi02-test.c +7
-1@@ -17,9 +17,11 @@*/ #define MP_FLASH_SIZE_MAX (32 * 1024 * 1024) -#define FLASH_SIZE (8 * 1024 * 1024)#define BASE_ADDR (0x100000000ULL - MP_FLASH_SIZE_MAX) +#define UNIFORM_FLASH_SIZE (8 * 1024 * 1024) +#define UNIFORM_FLASH_SECTOR_SIZE (64 * 1024) +/* Use a newtype to keep flash addresses separate from byte addresses. */ typedef struct { uint64_t addr;@@ -44,6 +46,10 @@ typedef struct {typedef struct {int bank_width; +/* Nonuniform block size. */ +int nb_blocs[4 ]; +int sector_len[4 ]; +QTestState *qtest; }FlashConfig ;
tests/pflash-cfi02-test.c static FlashConfig expand_config_defaults(const FlashConfig *c) · line 73
Quoted 6 lines
tests/pflash-cfi02-test.c +3
-0@@ -62,6 +68,10 @@ static FlashConfig expand_config_defaults(const FlashConfig *c)if (ret.bank_width ==0 ) { ret.bank_width =2 ; } +if (ret.nb_blocs[0 ] ==0 && ret.sector_len[0 ] ==0 ) { + ret.sector_len[0 ] =UNIFORM_FLASH_SECTOR_SIZE ; + ret.nb_blocs[0 ] =UNIFORM_FLASH_SIZE /UNIFORM_FLASH_SECTOR_SIZE ;
See, here you use index=0 for the uniform config.
Quoted 205 lines
tests/pflash-cfi02-test.c +107
-37+ }/* XXX: Limitations of test harness. */ assert (ret.bank_width ==2 );@@ -230,13 +240,41 @@ static void chip_erase(const FlashConfig *c)flash_cmd (c,UNLOCK0_ADDR ,CHIP_ERASE_CMD ); } -static void test_flash (const void *opaque) +/* +* Test flash commands with a variety of device geometry. +*/ +static void test_geometry (const void *opaque) {const FlashConfig *config = opaque;QTestState *qtest; qtest =qtest_initf ("-M musicpal,accel=qtest" -" -drive if=pflash,file=%s,format=raw,copy-on-read" , - image_path); +" -drive if=pflash,file=%s,format=raw,copy-on-read" +/* Device geometry properties. */ +" -global driver=cfi.pflash02," +"property=num-blocks0,value=%d" +" -global driver=cfi.pflash02," +"property=sector-length0,value=%d" +" -global driver=cfi.pflash02," +"property=num-blocks1,value=%d" +" -global driver=cfi.pflash02," +"property=sector-length1,value=%d" +" -global driver=cfi.pflash02," +"property=num-blocks2,value=%d" +" -global driver=cfi.pflash02," +"property=sector-length2,value=%d" +" -global driver=cfi.pflash02," +"property=num-blocks3,value=%d" +" -global driver=cfi.pflash02," +"property=sector-length3,value=%d" , + image_path, + config->nb_blocs[0 ], + config->sector_len[0 ], + config->nb_blocs[1 ], + config->sector_len[1 ], + config->nb_blocs[2 ], + config->sector_len[2 ], + config->nb_blocs[3 ], + config->sector_len[3 ]);FlashConfig explicit_config =expand_config_defaults (config); explicit_config.qtest = qtest;const FlashConfig *c = &explicit_config;@@ -264,39 +302,56 @@ static void test_flash(const void *opaque) g_assert_cmphex(flash_query(c, FLASH_ADDR(0x12)), ==, replicate(c, 'Y'));/* Num erase regions. */ - g_assert_cmphex(flash_query_1(c, FLASH_ADDR(0x2C)), >=, 1); +int nb_erase_regions =flash_query_1 (c,FLASH_ADDR (0x2C )); + g_assert_cmphex(nb_erase_regions, ==, + !!c->nb_blocs[0 ] + !!c->nb_blocs[1 ] + !!c->nb_blocs[2 ] + + !!c->nb_blocs[3 ]); + +/* Check device length. */ +uint32_t device_len =1 <<flash_query_1 (c,FLASH_ADDR (0x27 )); + g_assert_cmphex(device_len, ==, UNIFORM_FLASH_SIZE); -uint32_t nb_sectors =flash_query_1 (c,FLASH_ADDR (0x2D )) + - (flash_query_1 (c,FLASH_ADDR (0x2E )) <<8 ) +1 ; -uint32_t sector_len = (flash_query_1 (c,FLASH_ADDR (0x2F )) <<8 ) + - (flash_query_1 (c,FLASH_ADDR (0x30 )) <<16 );reset (c);const uint64_t dq7 =replicate (c,0x80 );const uint64_t dq6 =replicate (c,0x40 ); -/* Erase and program sector. */ -for (uint32_t i =0 ; i < nb_sectors; ++i) { -uint64_t byte_addr = i * sector_len; -sector_erase (c, byte_addr); -/* Read toggle. */ -uint64_t status0 =flash_read (c, byte_addr); -/* DQ7 is 0 during an erase. */ - g_assert_cmphex(status0 & dq7, ==, 0); -uint64_t status1 =flash_read (c, byte_addr); -/* DQ6 toggles during an erase. */ - g_assert_cmphex(status0 & dq6, ==, ~status1 & dq6); -/* Wait for erase to complete. */ -qtest_clock_step_next (c->qtest); -/* Ensure DQ6 has stopped toggling. */ - g_assert_cmphex(flash_read(c, byte_addr), ==, flash_read(c, byte_addr)); -/* Now the data should be valid. */ - g_assert_cmphex(flash_read(c, byte_addr), ==, bank_mask(c)); +uint64_t byte_addr =0 ; +for (int region =0 ; region < nb_erase_regions; ++region) { +uint64_t base =0x2D +4 * region; +flash_cmd (c,CFI_ADDR ,CFI_CMD ); +uint32_t nb_sectors =flash_query_1 (c,FLASH_ADDR (base +0 )) + + (flash_query_1 (c,FLASH_ADDR (base +1 )) <<8 ) +1 ; +uint32_t sector_len = (flash_query_1 (c,FLASH_ADDR (base +2 )) <<8 ) + + (flash_query_1 (c,FLASH_ADDR (base +3 )) <<16 ); + g_assert_cmphex(nb_sectors, ==, c->nb_blocs[region]); + g_assert_cmphex(sector_len, ==, c->sector_len[region]); +reset (c); -/* Program a bit pattern. */ -program (c, byte_addr,0x55 ); - g_assert_cmphex(flash_read(c, byte_addr) & 0xFF, ==, 0x55); -program (c, byte_addr,0xA5 ); - g_assert_cmphex(flash_read(c, byte_addr) & 0xFF, ==, 0x05); +/* Erase and program sector. */ +for (uint32_t i =0 ; i < nb_sectors; ++i) { +sector_erase (c, byte_addr); +/* Read toggle. */ +uint64_t status0 =flash_read (c, byte_addr); +/* DQ7 is 0 during an erase. */ + g_assert_cmphex(status0 & dq7, ==, 0); +uint64_t status1 =flash_read (c, byte_addr); +/* DQ6 toggles during an erase. */ + g_assert_cmphex(status0 & dq6, ==, ~status1 & dq6); +/* Wait for erase to complete. */ +qtest_clock_step_next (c->qtest); +/* Ensure DQ6 has stopped toggling. */ + g_assert_cmphex(flash_read(c, byte_addr), ==, +flash_read (c, byte_addr)); +/* Now the data should be valid. */ + g_assert_cmphex(flash_read(c, byte_addr), ==, bank_mask(c)); + +/* Program a bit pattern. */ +program (c, byte_addr,0x55 ); + g_assert_cmphex(flash_read(c, byte_addr) & 0xFF, ==, 0x55); +program (c, byte_addr,0xA5 ); + g_assert_cmphex(flash_read(c, byte_addr) & 0xFF, ==, 0x05); + byte_addr += sector_len; + } }/* Erase the chip. */ @@ -314,9 +369,11 @@ static void test_flash(const void *opaque) g_assert_cmphex(flash_read(c, 0), ==, flash_read(c, 0));/* Now the data should be valid. */ -for (uint32_t i =0 ; i < nb_sectors; ++i) { -uint64_t byte_addr = i * sector_len; - g_assert_cmphex(flash_read(c, byte_addr), ==, bank_mask(c)); +for (int region =0 ; region < nb_erase_regions; ++region) { +for (uint32_t i =0 ; i < c->nb_blocs[region]; ++i) { +uint64_t byte_addr = i * c->sector_len[region]; + g_assert_cmphex(flash_read(c, byte_addr), ==, bank_mask(c)); + } }/* Unlock bypass */ @@ -364,6 +421,18 @@ static const FlashConfig configuration[] = { { .bank_width = 2, }, + /* Nonuniform sectors (top boot). */ + { + .bank_width = 2, + .nb_blocs = { 127, 1, 2, 1 }, + .sector_len = { 0x10000, 0x08000, 0x02000, 0x04000 }, + }, + /* Nonuniform sectors (bottom boot). */ + { + .bank_width = 2, + .nb_blocs = { 1, 2, 1, 127 }, + .sector_len = { 0x04000, 0x02000, 0x08000, 0x10000 }, + }, }; int main(int argc, char **argv)@@ -374,12 +443,12 @@ int main(int argc, char **argv) strerror(errno));exit (EXIT_FAILURE ); } -if (ftruncate (fd,FLASH_SIZE ) <0 ) { +if (ftruncate (fd,UNIFORM_FLASH_SIZE ) <0 ) {int error_code = errno;close (fd);unlink (image_path);g_printerr ("Failed to truncate file %s to %u MB: %s\n" , image_path, -FLASH_SIZE ,strerror (error_code)); +UNIFORM_FLASH_SIZE ,strerror (error_code));exit (EXIT_FAILURE ); }close (fd);@@ -390,9 +459,19 @@ int main(int argc, char **argv)size_t nb_configurations =sizeof configuration /sizeof configuration[0 ];for (size_t i =0 ; i < nb_configurations; ++i) {const FlashConfig *config = &configuration[i]; -char *path =g_strdup_printf ("pflash-cfi02/%d" , +char *path =g_strdup_printf ("pflash-cfi02" +"/geometry/%dx%x-%dx%x-%dx%x-%dx%x" +"/%d" , + config->nb_blocs[0 ], + config->sector_len[0 ], + config->nb_blocs[1 ], + config->sector_len[1 ], + config->nb_blocs[2 ], + config->sector_len[2 ], + config->nb_blocs[3 ], + config->sector_len[3 ], config->bank_width); -qtest_add_data_func (path, config, test_flash); +qtest_add_data_func (path, config, test_geometry);g_free (path); }int result =g_test_run ();
PATCH v5 19/28 hw/block/pflash_cfi02: Extract pflash_regions_count()
In reply to Philippe Mathieu-DaudéExtract the pflash_regions_count() function, the code will be easier to review.
--- hw/block/pflash_cfi02.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-)
hw/block/pflash_cfi02.c +6 -2
@@ -157,6 +157,11 @@ static void pflash_register_memory(PFlashCFI02 *pfl, int rom_mode) pfl->rom_mode = rom_mode; } +static size_t pflash_regions_count (PFlashCFI02 *pfl) +{ +return pfl->cfi_table[0x2c ]; +} +static void pflash_timer (void *opaque) {PFlashCFI02 *pfl = opaque;
@@ -192,9 +197,8 @@ static uint64_t pflash_data_read(PFlashCFI02 *pfl, hwaddr offset,static uint32_t pflash_sector_len (PFlashCFI02 *pfl,hwaddr offset) {assert (offset < pfl->chip_len); -int nb_regions = pfl->cfi_table[0x2C ];hwaddr addr =0 ; -for (int i =0 ; i < nb_regions; ++i) { +for (int i =0 ; i <pflash_regions_count (pfl); ++i) {uint64_t region_size = (uint64_t )pfl->nb_blocs[i] * pfl->sector_len[i];if (addr <= offset && offset < addr + region_size) {return pfl->sector_len[i];
Signature · 1 line
2.20.1
Re: [Qemu-devel] [PATCH v5 19/28] hw/block/pflash_cfi02: Extract pflash_regions_count()
Quoted 5 lines · Philippe Mathieu-Daudé
Extract the
pflash_regions_count()function, the code will be easier to review.Signed-off-by Philippe Mathieu-Daudé <[email protected]>
Alistair
Quoted 35 lines
--- hw/block/pflash_cfi02.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-)hw/block/pflash_cfi02.c +6
-3@@ -157,6 +157,11 @@ static void pflash_register_memory(PFlashCFI02 *pfl, int rom_mode) pfl->rom_mode = rom_mode; } +static size_t pflash_regions_count (PFlashCFI02 *pfl) +{ +return pfl->cfi_table[0x2c ]; +} +static void pflash_timer (void *opaque) {PFlashCFI02 *pfl = opaque;@@ -192,9 +197,8 @@ static uint64_t pflash_data_read(PFlashCFI02 *pfl, hwaddr offset,static uint32_t pflash_sector_len (PFlashCFI02 *pfl,hwaddr offset) {assert (offset < pfl->chip_len); -int nb_regions = pfl->cfi_table[0x2C ];hwaddr addr =0 ; -for (int i =0 ; i < nb_regions; ++i) { +for (int i =0 ; i <pflash_regions_count (pfl); ++i) {uint64_t region_size = (uint64_t )pfl->nb_blocs[i] * pfl->sector_len[i];if (addr <= offset && offset < addr + region_size) {return pfl->sector_len[i]; --2.20.1
PATCH v5 20/28 hw/block/pflash_cfi02: Split if() condition
In reply to Philippe Mathieu-DaudéSplit the if() condition check and arrange the indentation to ease the review of the next patches. No logical change.
--- hw/block/pflash_cfi02.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)
hw/block/pflash_cfi02.c +4 -2
@@ -309,8 +309,10 @@ static void pflash_write(void *opaque, hwaddr offset, uint64_t value,trace_pflash_io_write (offset, width, width <<1 , value, pfl->wcycle); cmd = value; -if (pfl->cmd !=0xA0 && cmd ==0xF0 ) { - goto reset_flash; +if (pfl->cmd !=0xA0 ) { +if (cmd ==0xF0 ) { + goto reset_flash; + } } offset &= pfl->chip_len -1 ;
Signature · 1 line
2.20.1
Re: [Qemu-devel] [PATCH v5 20/28] hw/block/pflash_cfi02: Split if() condition
Quoted 5 lines · Philippe Mathieu-Daudé
Split the
if()condition check and arrange the indentation to ease the review of the next patches. No logical change.Signed-off-by Philippe Mathieu-Daudé <[email protected]>
Alistair
Quoted 25 lines
--- hw/block/pflash_cfi02.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)hw/block/pflash_cfi02.c +4
-3@@ -309,8 +309,10 @@ static void pflash_write(void *opaque, hwaddr offset, uint64_t value,trace_pflash_io_write (offset, width, width <<1 , value, pfl->wcycle); cmd = value; -if (pfl->cmd !=0xA0 && cmd ==0xF0 ) { - goto reset_flash; +if (pfl->cmd !=0xA0 ) { +if (cmd ==0xF0 ) { + goto reset_flash; + } } offset &= pfl->chip_len -1 ; --2.20.1
PATCH v5 21/28 hw/block/pflash_cfi02: Fix CFI in autoselect mode
In reply to Philippe Mathieu-DaudéFrom: Stephen Checkoway <[email protected]>
After a flash device enters CFI mode from autoselect mode, the reset command returns the device to autoselect mode. An additional reset command is necessary to return to read array mode.
Message-Id: <[email protected]>
--- hw/block/pflash_cfi02.c | 22 ++++++++++++++++++---- tests/pflash-cfi02-test.c | 39 +++++++++++++++++++++++++++++++++++++++ 2 files changed, 57 insertions(+), 4 deletions(-)
hw/block/pflash_cfi02.c +18 -4
@@ -66,6 +66,7 @@ do { \/* Special write cycles for CFI queries. */ enum {WCYCLE_CFI =7 , +WCYCLE_AUTOSELECT_CFI =8 , };struct PFlashCFI02 {
@@ -311,6 +312,12 @@ static void pflash_write(void *opaque, hwaddr offset, uint64_t value, cmd = value;if (pfl->cmd !=0xA0 ) {if (cmd ==0xF0 ) { +if (pfl->wcycle ==WCYCLE_AUTOSELECT_CFI ) { +/* Return to autoselect mode. */ + pfl->wcycle =3 ; + pfl->cmd =0x90 ; +return ; + } goto reset_flash; } }
@@ -333,7 +340,6 @@ static void pflash_write(void *opaque, hwaddr offset, uint64_t value,/* We're in read mode */ check_unlock0:if (boff ==0x55 && cmd ==0x98 ) { - enter_CFI_mode:/* Enter CFI query mode */ pfl->wcycle =WCYCLE_CFI ; pfl->cmd =0x98 ;
@@ -410,9 +416,16 @@ static void pflash_write(void *opaque, hwaddr offset, uint64_t value,/* Unlock bypass reset */ goto reset_flash; } -/* We can enter CFI query mode from autoselect mode */ -if (boff ==0x55 && cmd ==0x98 ) - goto enter_CFI_mode; +/* +* We can enter CFI query mode from autoselect mode, but we must +* return to autoselect mode after a reset. +*/ +if (boff ==0x55 && cmd ==0x98 ) { +/* Enter autoselect CFI query mode */ + pfl->wcycle =WCYCLE_AUTOSELECT_CFI ; + pfl->cmd =0x98 ; +return ; + }/* No break here */ default : DPRINTF("%s: invalid write for command %02x\n",
@@ -493,6 +506,7 @@ static void pflash_write(void *opaque, hwaddr offset, uint64_t value,break ;/* Special values for CFI queries */ case WCYCLE_CFI : +case WCYCLE_AUTOSELECT_CFI :DPRINTF ("%s: invalid write in CFI query mode\n" , __func__); goto reset_flash;default :
tests/pflash-cfi02-test.c +39 -0
@@ -407,6 +407,42 @@ static void test_geometry(const void *opaque)qtest_quit (qtest); } +/* +* Test that +* 1. enter autoselect mode; +* 2. enter CFI mode; and then +* 3. exit CFI mode +* leaves the flash device in autoselect mode. +*/ +static void test_cfi_in_autoselect (const void *opaque) +{ +const FlashConfig *config = opaque; +QTestState *qtest; + qtest =qtest_initf ("-M musicpal,accel=qtest" +" -drive if=pflash,file=%s,format=raw,copy-on-read" , + image_path); +FlashConfig explicit_config =expand_config_defaults (config); + explicit_config.qtest = qtest; +const FlashConfig *c = &explicit_config; + +/* 1. Enter autoselect. */ +unlock (c); +flash_cmd (c,UNLOCK0_ADDR ,AUTOSELECT_CMD ); + g_assert_cmpint(flash_query(c, FLASH_ADDR(0)), ==, replicate(c, 0xBF)); + +/* 2. Enter CFI. */ +flash_cmd (c,CFI_ADDR ,CFI_CMD ); + g_assert_cmpint(flash_query(c, FLASH_ADDR(0x10)), ==, replicate(c, 'Q')); + g_assert_cmpint(flash_query(c, FLASH_ADDR(0x11)), ==, replicate(c, 'R')); + g_assert_cmpint(flash_query(c, FLASH_ADDR(0x12)), ==, replicate(c, 'Y')); + +/* 3. Exit CFI. */ +reset (c); + g_assert_cmpint(flash_query(c, FLASH_ADDR(0)), ==, replicate(c, 0xBF)); + +qtest_quit (qtest); +} +static void cleanup (void *opaque) {unlink (image_path);
@@ -474,6 +510,9 @@ int main(int argc, char **argv)qtest_add_data_func (path, config, test_geometry);g_free (path); } + +qtest_add_data_func ("pflash-cfi02/cfi-in-autoselect" , &configuration[0 ], + test_cfi_in_autoselect);int result =g_test_run ();cleanup (NULL );return result;
Signature · 1 line
2.20.1
Re: [Qemu-devel] [PATCH v5 21/28] hw/block/pflash_cfi02: Fix CFI in autoselect mode
Quoted 11 lines · Philippe Mathieu-Daudé
From: Stephen Checkoway <[email protected]>
After a flash device enters CFI mode from autoselect mode, the reset command returns the device to autoselect mode. An additional reset command is necessary to return to read array mode.
Signed-off-by Stephen Checkoway <[email protected]>Acked-by Thomas Huth <[email protected]>Message-Id: <[email protected]>
Signed-off-by Philippe Mathieu-Daudé <[email protected]>
Alistair
Quoted 127 lines
--- hw/block/pflash_cfi02.c | 22 ++++++++++++++++++---- tests/pflash-cfi02-test.c | 39 +++++++++++++++++++++++++++++++++++++++ 2 files changed, 57 insertions(+), 4 deletions(-)hw/block/pflash_cfi02.c +18
-4@@ -66,6 +66,7 @@ do { \/* Special write cycles for CFI queries. */ enum {WCYCLE_CFI =7 , +WCYCLE_AUTOSELECT_CFI =8 , };struct PFlashCFI02 {@@ -311,6 +312,12 @@ static void pflash_write(void *opaque, hwaddr offset, uint64_t value, cmd = value;if (pfl->cmd !=0xA0 ) {if (cmd ==0xF0 ) { +if (pfl->wcycle ==WCYCLE_AUTOSELECT_CFI ) { +/* Return to autoselect mode. */ + pfl->wcycle =3 ; + pfl->cmd =0x90 ; +return ; + } goto reset_flash; } }@@ -333,7 +340,6 @@ static void pflash_write(void *opaque, hwaddr offset, uint64_t value,/* We're in read mode */ check_unlock0:if (boff ==0x55 && cmd ==0x98 ) { - enter_CFI_mode:/* Enter CFI query mode */ pfl->wcycle =WCYCLE_CFI ; pfl->cmd =0x98 ;@@ -410,9 +416,16 @@ static void pflash_write(void *opaque, hwaddr offset, uint64_t value,/* Unlock bypass reset */ goto reset_flash; } -/* We can enter CFI query mode from autoselect mode */ -if (boff ==0x55 && cmd ==0x98 ) - goto enter_CFI_mode; +/* +* We can enter CFI query mode from autoselect mode, but we must +* return to autoselect mode after a reset. +*/ +if (boff ==0x55 && cmd ==0x98 ) { +/* Enter autoselect CFI query mode */ + pfl->wcycle =WCYCLE_AUTOSELECT_CFI ; + pfl->cmd =0x98 ; +return ; + }/* No break here */ default : DPRINTF("%s: invalid write for command %02x\n",@@ -493,6 +506,7 @@ static void pflash_write(void *opaque, hwaddr offset, uint64_t value,break ;/* Special values for CFI queries */ case WCYCLE_CFI : +case WCYCLE_AUTOSELECT_CFI :DPRINTF ("%s: invalid write in CFI query mode\n" , __func__); goto reset_flash;default :tests/pflash-cfi02-test.c +39
-1@@ -407,6 +407,42 @@ static void test_geometry(const void *opaque)qtest_quit (qtest); } +/* +* Test that +* 1. enter autoselect mode; +* 2. enter CFI mode; and then +* 3. exit CFI mode +* leaves the flash device in autoselect mode. +*/ +static void test_cfi_in_autoselect (const void *opaque) +{ +const FlashConfig *config = opaque; +QTestState *qtest; + qtest =qtest_initf ("-M musicpal,accel=qtest" +" -drive if=pflash,file=%s,format=raw,copy-on-read" , + image_path); +FlashConfig explicit_config =expand_config_defaults (config); + explicit_config.qtest = qtest; +const FlashConfig *c = &explicit_config; + +/* 1. Enter autoselect. */ +unlock (c); +flash_cmd (c,UNLOCK0_ADDR ,AUTOSELECT_CMD ); + g_assert_cmpint(flash_query(c, FLASH_ADDR(0)), ==, replicate(c, 0xBF)); + +/* 2. Enter CFI. */ +flash_cmd (c,CFI_ADDR ,CFI_CMD ); + g_assert_cmpint(flash_query(c, FLASH_ADDR(0x10)), ==, replicate(c, 'Q')); + g_assert_cmpint(flash_query(c, FLASH_ADDR(0x11)), ==, replicate(c, 'R')); + g_assert_cmpint(flash_query(c, FLASH_ADDR(0x12)), ==, replicate(c, 'Y')); + +/* 3. Exit CFI. */ +reset (c); + g_assert_cmpint(flash_query(c, FLASH_ADDR(0)), ==, replicate(c, 0xBF)); + +qtest_quit (qtest); +} +static void cleanup (void *opaque) {unlink (image_path);@@ -474,6 +510,9 @@ int main(int argc, char **argv)qtest_add_data_func (path, config, test_geometry);g_free (path); } + +qtest_add_data_func ("pflash-cfi02/cfi-in-autoselect" , &configuration[0 ], + test_cfi_in_autoselect);int result =g_test_run ();cleanup (NULL );return result; --2.20.1
PATCH v5 22/28 hw/block/pflash_cfi02: Fix reset command not ignored during erase
In reply to Philippe Mathieu-DaudéFrom: Stephen Checkoway <[email protected]>
When the flash device is performing a chip erase, all commands are ignored. When it is performing a sector erase, only the erase suspend command is valid, which is currently not supported.
In particular, the reset command should not cause the device to reset to read array mode while programming is on going.
Message-Id: <[email protected]>
--- hw/block/pflash_cfi02.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
hw/block/pflash_cfi02.c +2 -1
@@ -311,7 +311,8 @@ static void pflash_write(void *opaque, hwaddr offset, uint64_t value,trace_pflash_io_write (offset, width, width <<1 , value, pfl->wcycle); cmd = value;if (pfl->cmd !=0xA0 ) { -if (cmd ==0xF0 ) { +/* Reset does nothing during chip erase and sector erase. */ +if (cmd ==0xF0 && pfl->cmd !=0x10 && pfl->cmd !=0x30 ) {if (pfl->wcycle ==WCYCLE_AUTOSELECT_CFI ) {/* Return to autoselect mode. */ pfl->wcycle =3 ;
Signature · 1 line
2.20.1
Re: [Qemu-devel] [PATCH v5 22/28] hw/block/pflash_cfi02: Fix reset command not ignored during erase
Quoted 7 lines · Philippe Mathieu-Daudé
From: Stephen Checkoway <[email protected]>
When the flash device is performing a chip erase, all commands are ignored. When it is performing a sector erase, only the erase suspend command is valid, which is currently not supported.
Quoted 6 lines
In particular, the reset command should not cause the device to reset to read array mode while programming is on going.
Signed-off-by Stephen Checkoway <[email protected]>Message-Id: <[email protected]>
Signed-off-by Philippe Mathieu-Daudé <[email protected]>
Alistair
Quoted 22 lines
--- hw/block/pflash_cfi02.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)hw/block/pflash_cfi02.c +2
-2@@ -311,7 +311,8 @@ static void pflash_write(void *opaque, hwaddr offset, uint64_t value,trace_pflash_io_write (offset, width, width <<1 , value, pfl->wcycle); cmd = value;if (pfl->cmd !=0xA0 ) { -if (cmd ==0xF0 ) { +/* Reset does nothing during chip erase and sector erase. */ +if (cmd ==0xF0 && pfl->cmd !=0x10 && pfl->cmd !=0x30 ) {if (pfl->wcycle ==WCYCLE_AUTOSELECT_CFI ) {/* Return to autoselect mode. */ pfl->wcycle =3 ; --2.20.1
PATCH v5 23/28 hw/block/pflash_cfi02: Implement multi-sector erase
In reply to Philippe Mathieu-DaudéFrom: Stephen Checkoway <[email protected]>
After two unlock cycles and a sector erase command, the AMD flash chips start a 50 us erase time out. Any additional sector erase commands add a sector to be erased and restart the 50 us timeout. During the timeout, status bit DQ3 is cleared. After the time out, DQ3 is asserted during erasure.
Message-Id: <[email protected]>
--- hw/block/pflash_cfi02.c | 94 +++++++++++++++++++++++++++++++-------- tests/pflash-cfi02-test.c | 70 +++++++++++++++++++++++++---- 2 files changed, 137 insertions(+), 27 deletions(-)
hw/block/pflash_cfi02.c +76 -18
@@ -31,7 +31,6 @@* It does not support flash interleaving. * It does not implement software data protection as found in many real chips * It does not implement erase suspend/resume commands -* It does not implement multiple sectors erase */ #include "qemu/osdep.h"
@@ -106,6 +105,7 @@ struct PFlashCFI02 {MemoryRegion orig_mem;int rom_mode;int read_counter;/* used for lazy switch-back to rom mode */ +int sectors_to_erase;char *name;void *storage; };
@@ -135,6 +135,22 @@ static inline void toggle_dq6(PFlashCFI02 *pfl) pfl->status ^=0x40 ; } +/* +* Turn on DQ3. +*/ +static inline void assert_dq3 (PFlashCFI02 *pfl) +{ + pfl->status |=0x08 ; +} + +/* +* Turn off DQ3. +*/ +static inline void reset_dq3 (PFlashCFI02 *pfl) +{ + pfl->status &= ~0x08 ; +} +/* * Set up replicated mappings of the same region. */
@@ -163,11 +179,37 @@ static size_t pflash_regions_count(PFlashCFI02 *pfl)return pfl->cfi_table[0x2c ]; } -static void pflash_timer (void *opaque) +static void pflash_timer (void *opaque) {PFlashCFI02 *pfl = opaque;trace_pflash_timer_expired (pfl->cmd); +if (pfl->cmd ==0x30 ) { +/* +* Sector erase. If DQ3 is 0 when the timer expires, then the 50 +* us erase timeout has expired so we need to start the timer for the +* sector erase algorithm. Otherwise, the erase completed and we should +* go back to read array mode. +*/ +if ((pfl->status &0x08 ) ==0 ) { +assert_dq3 (pfl); +/* +* CFI address 0x21 is "Typical timeout per individual block erase +* 2^N ms" +*/ +uint64_t timeout = ((1ULL << pfl->cfi_table[0x21 ]) * + pfl->sectors_to_erase) *1000000 ; +timer_mod (&pfl->timer, +qemu_clock_get_ns (QEMU_CLOCK_VIRTUAL ) + timeout); +DPRINTF ("%s: erase timeout fired; erasing %d sectors\n" , + __func__, pfl->sectors_to_erase); +return ; + } +DPRINTF ("%s: sector erase complete\n" , __func__); + pfl->sectors_to_erase =0 ; +reset_dq3 (pfl); + } +/* Reset flash */ toggle_dq7 (pfl);if (pfl->bypass) {
@@ -299,6 +341,24 @@ static void pflash_update(PFlashCFI02 *pfl, int offset, int size) } } +static void pflash_sector_erase (PFlashCFI02 *pfl,hwaddr offset) +{ +uint64_t sector_len =pflash_sector_len (pfl, offset); + offset &= ~(sector_len -1 ); +DPRINTF ("%s: start sector erase at %0*" PRIx64"-%0*" PRIx64"\n" , + __func__, pfl->width *2 , offset, + pfl->width *2 , offset + sector_len -1 ); +if (!pfl->ro) { +uint8_t *p = pfl->storage; +memset (p + offset,0xff , sector_len); +pflash_update (pfl, offset, sector_len); + } +set_dq7 (pfl,0x00 ); + ++pfl->sectors_to_erase; +/* Set (or reset) the 50 us timer for additional erase commands. */ +timer_mod (&pfl->timer,qemu_clock_get_ns (QEMU_CLOCK_VIRTUAL ) +50000 ); +} +static void pflash_write (void *opaque,hwaddr offset,uint64_t value,unsigned int width) {
@@ -306,7 +366,6 @@ static void pflash_write(void *opaque, hwaddr offset, uint64_t value,hwaddr boff;uint8_t *p;uint8_t cmd; -uint32_t sector_len;trace_pflash_io_write (offset, width, width <<1 , value, pfl->wcycle); cmd = value;
@@ -469,20 +528,7 @@ static void pflash_write(void *opaque, hwaddr offset, uint64_t value,break ;case 0x30 :/* Sector erase */ - p = pfl->storage; - sector_len =pflash_sector_len (pfl, offset); - offset &= ~(sector_len -1 ); -DPRINTF ("%s: start sector erase at %0*" PRIx64"-%0*" PRIx64"\n" , - __func__, pfl->width *2 , offset, - pfl->width *2 , offset + sector_len -1 ); -if (!pfl->ro) { -memset (p + offset,0xff , sector_len); -pflash_update (pfl, offset, sector_len); - } -set_dq7 (pfl,0x00 ); -/* Let's wait 1/2 second before sector erase is done */ -timer_mod (&pfl->timer,qemu_clock_get_ns (QEMU_CLOCK_VIRTUAL ) + - (NANOSECONDS_PER_SECOND /2 )); +pflash_sector_erase (pfl, offset);break ;default :DPRINTF ("%s: invalid command %02x (wc 5)\n" , __func__, cmd);
@@ -496,7 +542,19 @@ static void pflash_write(void *opaque, hwaddr offset, uint64_t value,/* Ignore writes during chip erase */ return ;case 0x30 : -/* Ignore writes during sector erase */ +/* +* If DQ3 is 0, additional sector erase commands can be +* written and anything else (other than an erase suspend) resets +* the device. +*/ +if ((pfl->status &0x08 ) ==0 ) { +if (cmd ==0x30 ) { +pflash_sector_erase (pfl, offset); + }else { + goto reset_flash; + } + } +/* Ignore writes during the actual erase. */ return ;default :/* Should never happen */
tests/pflash-cfi02-test.c +61 -9
128 lines not on this page · raw message
Signature · 1 line
2.20.1
PATCH v5 24/28 hw/block/pflash_cfi02: Implement erase suspend/resume
In reply to Philippe Mathieu-DaudéFrom: Stephen Checkoway <[email protected]>
During a sector erase (but not a chip erase), the embeded erase program can be suspended. Once suspended, the sectors not selected for erasure may be read and programmed. Autoselect mode is allowed during erase suspend mode. Presumably, CFI queries are similarly allowed so this commit allows them as well.
Since guest firmware can use status bits DQ7, DQ6, DQ3, and DQ2 to determine the current state of sector erasure, these bits are properly implemented.
Message-Id: <[email protected]>
--- hw/block/pflash_cfi02.c | 154 ++++++++++++++++++++++++++++++++++---- tests/pflash-cfi02-test.c | 110 +++++++++++++++++++++++++++ 2 files changed, 250 insertions(+), 14 deletions(-)
hw/block/pflash_cfi02.c +140 -14
@@ -30,7 +30,6 @@* * It does not support flash interleaving. * It does not implement software data protection as found in many real chips -* It does not implement erase suspend/resume commands */ #include "qemu/osdep.h"
@@ -38,6 +37,7 @@#include "hw/block/block.h" #include "hw/block/flash.h" #include "qapi/error.h" +#include "qemu/bitmap.h" #include "qemu/timer.h" #include "sysemu/block-backend.h" #include "qemu/host-utils.h"
@@ -76,6 +76,7 @@ struct PFlashCFI02 {BlockBackend *blk;uint32_t uniform_nb_blocs;uint32_t uniform_sector_len; +uint32_t total_sectors;uint32_t nb_blocs[PFLASH_MAX_ERASE_REGIONS ];uint32_t sector_len[PFLASH_MAX_ERASE_REGIONS ];uint32_t chip_len;
@@ -106,6 +107,8 @@ struct PFlashCFI02 {int rom_mode;int read_counter;/* used for lazy switch-back to rom mode */ int sectors_to_erase; +uint64_t erase_time_remaining; +unsigned long *sector_erase_map;char *name;void *storage; };
@@ -151,6 +154,14 @@ static inline void reset_dq3(PFlashCFI02 *pfl) pfl->status &= ~0x08 ; } +/* +* Toggle status bit DQ2. +*/ +static inline void toggle_dq2 (PFlashCFI02 *pfl) +{ + pfl->status ^=0x04 ; +} +/* * Set up replicated mappings of the same region. */
@@ -179,6 +190,29 @@ static size_t pflash_regions_count(PFlashCFI02 *pfl)return pfl->cfi_table[0x2c ]; } +/* +* Returns the time it takes to erase the number of sectors scheduled for +* erasure based on CFI address 0x21 which is "Typical timeout per individual +* block erase 2^N ms." +*/ +static uint64_t pflash_erase_time (PFlashCFI02 *pfl) +{ +/* +* If there are no sectors to erase (which can happen if all of the sectors +* to be erased are protected), then erase takes 100 us. Protected sectors +* aren't supported so this should never happen. +*/ +return ((1ULL << pfl->cfi_table[0x21 ]) * pfl->sectors_to_erase) *SCALE_US ; +} + +/* +* Returns true if the device is currently in erase suspend mode. +*/ +static inline bool pflash_erase_suspend_mode (PFlashCFI02 *pfl) +{ +return pfl->erase_time_remaining >0 ; +} +static void pflash_timer (void *opaque) {PFlashCFI02 *pfl = opaque;
@@ -193,12 +227,7 @@ static void pflash_timer(void *opaque)*/ if ((pfl->status &0x08 ) ==0 ) {assert_dq3 (pfl); -/* -* CFI address 0x21 is "Typical timeout per individual block erase -* 2^N ms" -*/ -uint64_t timeout = ((1ULL << pfl->cfi_table[0x21 ]) * - pfl->sectors_to_erase) *1000000 ; +uint64_t timeout =pflash_erase_time (pfl);timer_mod (&pfl->timer,qemu_clock_get_ns (QEMU_CLOCK_VIRTUAL ) + timeout); DPRINTF("%s: erase timeout fired; erasing %d sectors\n",
@@ -206,6 +235,7 @@ static void pflash_timer(void *opaque)return ; }DPRINTF ("%s: sector erase complete\n" , __func__); +bitmap_zero (pfl->sector_erase_map, pfl->total_sectors); pfl->sectors_to_erase =0 ;reset_dq3 (pfl); }
@@ -233,24 +263,44 @@ static uint64_t pflash_data_read(PFlashCFI02 *pfl, hwaddr offset,return ret; } +typedef struct { +uint32_t len; +uint32_t num; +}SectorInfo ; +/* * offset should be a byte offset of the QEMU device and _not_ a device * offset. */ -static uint32_t pflash_sector_len (PFlashCFI02 *pfl,hwaddr offset) +static SectorInfo pflash_sector_info (PFlashCFI02 *pfl,hwaddr offset) {assert (offset < pfl->chip_len);hwaddr addr =0 ; +uint32_t sector_num =0 ;for (int i =0 ; i <pflash_regions_count (pfl); ++i) {uint64_t region_size = (uint64_t )pfl->nb_blocs[i] * pfl->sector_len[i];if (addr <= offset && offset < addr + region_size) { -return pfl->sector_len[i]; +return (SectorInfo ) { + .len = pfl->sector_len[i], + .num = sector_num + (offset - addr) / pfl->sector_len[i], + }; } + sector_num += pfl->nb_blocs[i]; addr += region_size; }abort (); } +/* +* Returns true if the offset refers to a flash sector that is currently being +* erased. +*/ +static bool pflash_sector_is_erasing (PFlashCFI02 *pfl,hwaddr offset) +{ +long sector_num =pflash_sector_info (pfl, offset).num; +return test_bit (sector_num, pfl->sector_erase_map); +} +static uint64_t pflash_read (void *opaque,hwaddr offset,unsigned int width) {PFlashCFI02 *pfl = opaque;
@@ -280,6 +330,15 @@ static uint64_t pflash_read(void *opaque, hwaddr offset, unsigned int width)case 0x80 :/* We accept reads during second unlock sequence... */ case 0x00 : +if (pflash_erase_suspend_mode (pfl) && +pflash_sector_is_erasing (pfl, offset)) { +/* Toggle bit 2, but not 6. */ +toggle_dq2 (pfl); +/* Status register read */ + ret = pfl->status; +DPRINTF ("%s: status %" PRIx64"\n" , __func__, ret); +break ; + }/* Flash area read */ ret =pflash_data_read (pfl, offset, width);break ;
@@ -305,13 +364,16 @@ static uint64_t pflash_read(void *opaque, hwaddr offset, unsigned int width) }DPRINTF ("%s: ID " TARGET_FMT_plx" %" PRIx64"\n" , __func__, boff, ret);break ; -case 0xA0 :case 0x10 :case 0x30 : +/* Toggle bit 2 during erase, but not program. */ +toggle_dq2 (pfl); +case 0xA0 : +/* Toggle bit 6 */ +toggle_dq6 (pfl);/* Status register read */ ret = pfl->status;DPRINTF ("%s: status %" PRIx64"\n" , __func__, ret); -toggle_dq6 (pfl);break ;case 0x98 :/* CFI query mode */
@@ -343,7 +405,8 @@ static void pflash_update(PFlashCFI02 *pfl, int offset, int size)static void pflash_sector_erase (PFlashCFI02 *pfl,hwaddr offset) { -uint64_t sector_len =pflash_sector_len (pfl, offset); +SectorInfo sector_info =pflash_sector_info (pfl, offset); +uint64_t sector_len = sector_info.len; offset &= ~(sector_len -1 ); DPRINTF("%s: start sector erase at %0*" PRIx64 "-%0*" PRIx64 "\n", __func__, pfl->width * 2, offset,
@@ -355,6 +418,7 @@ static void pflash_sector_erase(PFlashCFI02 *pfl, hwaddr offset) }set_dq7 (pfl,0x00 ); ++pfl->sectors_to_erase; +set_bit (sector_info.num, pfl->sector_erase_map);/* Set (or reset) the 50 us timer for additional erase commands. */ timer_mod (&pfl->timer,qemu_clock_get_ns (QEMU_CLOCK_VIRTUAL ) +50000 ); }
@@ -405,6 +469,25 @@ static void pflash_write(void *opaque, hwaddr offset, uint64_t value, pfl->cmd =0x98 ;return ; } +/* Handle erase resume in erase suspend mode, otherwise reset. */ +if (cmd ==0x30 ) { +if (pflash_erase_suspend_mode (pfl)) { +/* Resume the erase. */ +timer_mod (&pfl->timer,qemu_clock_get_ns (QEMU_CLOCK_VIRTUAL ) + + pfl->erase_time_remaining); + pfl->erase_time_remaining =0 ; + pfl->wcycle =6 ; + pfl->cmd =0x30 ; +set_dq7 (pfl,0x00 ); +assert_dq3 (pfl); +return ; + } + goto reset_flash; + } +/* Ignore erase suspend. */ +if (cmd ==0xB0 ) { +return ; + }if (boff != pfl->unlock_addr0 || cmd !=0xAA ) {DPRINTF ("%s: unlock0 failed " TARGET_FMT_plx" %02x %04x\n" , __func__, boff, cmd, pfl->unlock_addr0);
@@ -450,6 +533,14 @@ static void pflash_write(void *opaque, hwaddr offset, uint64_t value,/* We need another unlock sequence */ goto check_unlock0;case 0xA0 : +if (pflash_erase_suspend_mode (pfl) && +pflash_sector_is_erasing (pfl, offset)) { +/* Ignore writes to erasing sectors. */ +if (pfl->bypass) { + goto do_bypass; + } + goto reset_flash; + }trace_pflash_data_write (offset, width <<1 , value,0 );if (!pfl->ro) { p = (uint8_t *)pfl->storage + offset;
@@ -508,6 +599,10 @@ static void pflash_write(void *opaque, hwaddr offset, uint64_t value, }break ;case 5 : +if (pflash_erase_suspend_mode (pfl)) { +/* Erasing is not supported in erase suspend mode. */ + goto reset_flash; + }switch (cmd) {case 0x10 :if (boff != pfl->unlock_addr0) {
@@ -542,6 +637,30 @@ static void pflash_write(void *opaque, hwaddr offset, uint64_t value,/* Ignore writes during chip erase */ return ;case 0x30 : +if (cmd ==0xB0 ) { +/* +* If erase suspend happens during the erase timeout (so DQ3 is +* 0), then the device suspends erasing immediately. Set the +* remaining time to be the total time to erase. Otherwise, +* there is a maximum amount of time it can take to enter +* suspend mode. Let's ignore that and suspend immediately and +* set the remaining time to the actual time remaining on the +* timer. +*/ +if ((pfl->status &0x08 ) ==0 ) { + pfl->erase_time_remaining =pflash_erase_time (pfl); + }else { +int64_t delta =timer_expire_time_ns (&pfl->timer) - +qemu_clock_get_ns (QEMU_CLOCK_VIRTUAL ); +/* Make sure we have a positive time remaining. */ + pfl->erase_time_remaining = delta <=0 ?1 : delta; + } +reset_dq3 (pfl); +timer_del (&pfl->timer); + pfl->wcycle =0 ; + pfl->cmd =0 ; +return ; + }/* * If DQ3 is 0, additional sector erase commands can be * written and anything else (other than an erase suspend) resets
@@ -619,10 +738,12 @@ static void pflash_cfi02_realize(DeviceState *dev, Error **errp)int nb_regions; pfl->chip_len =0 ; + pfl->total_sectors =0 ;for (nb_regions =0 ; nb_regions <PFLASH_MAX_ERASE_REGIONS ; ++nb_regions) {if (pfl->nb_blocs[nb_regions] ==0 ) {break ; } + pfl->total_sectors += pfl->nb_blocs[nb_regions];uint64_t sector_len_per_device = pfl->sector_len[nb_regions];/*
@@ -656,6 +777,7 @@ static void pflash_cfi02_realize(DeviceState *dev, Error **errp) pfl->nb_blocs[0 ] = pfl->uniform_nb_blocs; pfl->sector_len[0 ] = pfl->uniform_sector_len; pfl->chip_len = uniform_len; + pfl->total_sectors = pfl->uniform_nb_blocs; }else if (uniform_len !=0 && uniform_len != pfl->chip_len) {error_setg (errp,"\"num-blocks\"*\"sector-length\" " "different from \"num-blocks0\"*\'sector-length0\" + ... + "
@@ -697,6 +819,9 @@ static void pflash_cfi02_realize(DeviceState *dev, Error **errp) pfl->unlock_addr0 &=0x7FF ; pfl->unlock_addr1 &=0x7FF ; +/* Allocate memory for a bitmap for sectors being erased. */ + pfl->sector_erase_map =bitmap_new (pfl->total_sectors); +pflash_setup_mappings (pfl); pfl->rom_mode =1 ;sysbus_init_mmio (SYS_BUS_DEVICE (dev), &pfl->mem);
@@ -781,8 +906,8 @@ static void pflash_cfi02_realize(DeviceState *dev, Error **errp)/* Address sensitive unlock required. */ pfl->cfi_table[0x05 + pri_ofs] =0x00 ; -/* Erase suspend not supported. */ - pfl->cfi_table[0x06 + pri_ofs] =0x00 ; +/* Erase suspend to read/write. */ + pfl->cfi_table[0x06 + pri_ofs] =0x02 ;/* Sector protect not supported. */ pfl->cfi_table[0x07 + pri_ofs] =0x00 ;/* Temporary sector unprotect not supported. */
@@ -829,6 +954,7 @@ static void pflash_cfi02_unrealize(DeviceState *dev, Error **errp) {PFlashCFI02 *pfl =PFLASH_CFI02 (dev);timer_del (&pfl->timer); +g_free (pfl->sector_erase_map); }static void pflash_cfi02_class_init (ObjectClass *klass,void *data)
tests/pflash-cfi02-test.c +110 -0
139 lines not on this page · raw message
Signature · 1 line
2.20.1
PATCH v5 25/28 hw/block/pflash_cfi02: Use chip erase time specified in the CFI table
In reply to Philippe Mathieu-DaudéFrom: Stephen Checkoway <[email protected]>
When erasing the chip, use the typical time specified in the CFI table rather than arbitrarily selecting 5 seconds.
Since the currently unconfigurable value set in the table is 12, this means a chip erase takes 4096 ms so this isn't a big change in behavior.
Message-Id: <[email protected]>
---
TODO check not zero
--- hw/block/pflash_cfi02.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
hw/block/pflash_cfi02.c +2 -2
@@ -617,9 +617,9 @@ static void pflash_write(void *opaque, hwaddr offset, uint64_t value,pflash_update (pfl,0 , pfl->chip_len); }set_dq7 (pfl,0x00 ); -/* Let's wait 5 seconds before chip erase is done */ +/* Wait the time specified at CFI address 0x22. */ timer_mod (&pfl->timer,qemu_clock_get_ns (QEMU_CLOCK_VIRTUAL ) + - (NANOSECONDS_PER_SECOND *5 )); + (1ULL << pfl->cfi_table[0x22 ]) *SCALE_MS );break ;case 0x30 :/* Sector erase */
Signature · 1 line
2.20.1
Re: [Qemu-devel] [PATCH v5 25/28] hw/block/pflash_cfi02: Use chip erase time specified in the CFI table
Quoted 6 lines · Philippe Mathieu-Daudé
From: Stephen Checkoway <[email protected]>
When erasing the chip, use the typical time specified in the CFI table rather than arbitrarily selecting 5 seconds.
Quoted 6 lines
Since the currently unconfigurable value set in the table is 12, this means a chip erase takes 4096 ms so this isn't a big change in behavior.
Signed-off-by Stephen Checkoway <[email protected]>Message-Id: <[email protected]>
Signed-off-by Philippe Mathieu-Daudé <[email protected]>
Alistair
Quoted 26 lines
---
TODO check not zero--- hw/block/pflash_cfi02.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)hw/block/pflash_cfi02.c +2
-3@@ -617,9 +617,9 @@ static void pflash_write(void *opaque, hwaddr offset, uint64_t value,pflash_update (pfl,0 , pfl->chip_len); }set_dq7 (pfl,0x00 ); -/* Let's wait 5 seconds before chip erase is done */ +/* Wait the time specified at CFI address 0x22. */ timer_mod (&pfl->timer,qemu_clock_get_ns (QEMU_CLOCK_VIRTUAL ) + - (NANOSECONDS_PER_SECOND *5 )); + (1ULL << pfl->cfi_table[0x22 ]) *SCALE_MS );break ;case 0x30 :/* Sector erase */ --2.20.1
PATCH v5 26/28 hw/block/pflash_cfi02: Reduce single byte/word write delay
In reply to Philippe Mathieu-DaudéMessage-Id: <[email protected]>
---
TODO: Why? To respect the datasheet? Which model is this?
--- hw/block/pflash_cfi02.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
hw/block/pflash_cfi02.c +2 -2
@@ -857,8 +857,8 @@ static void pflash_cfi02_realize(DeviceState *dev, Error **errp) pfl->cfi_table[0x1D ] =0x00 ;/* Vpp max (no Vpp pin) */ pfl->cfi_table[0x1E ] =0x00 ; -/* Timeout per single byte/word write (128 ms) */ - pfl->cfi_table[0x1F ] =0x07 ; +/* Timeout per single byte/word write (16 us) */ + pfl->cfi_table[0x1F ] =0x04 ;/* Timeout for min size buffer write (NA) */ pfl->cfi_table[0x20 ] =0x00 ;/* Typical timeout for block erase (512 ms) */
Signature · 1 line
2.20.1
PATCH v5 27/28 hw/block/pflash_cfi02: Document commands
In reply to Philippe Mathieu-Daudé--- hw/block/pflash_cfi02.c | 40 +++++++++++++++++++--------------------- 1 file changed, 19 insertions(+), 21 deletions(-)
hw/block/pflash_cfi02.c +19 -21
@@ -327,7 +327,7 @@ static uint64_t pflash_read(void *opaque, hwaddr offset, unsigned int width) pfl->wcycle =0 ; pfl->cmd =0 ;/* fall through to the read code */ -case 0x80 : +case 0x80 :/* Erase (unlock) */ /* We accept reads during second unlock sequence... */ case 0x00 : if (pflash_erase_suspend_mode(pfl) &&
@@ -342,8 +342,7 @@ static uint64_t pflash_read(void *opaque, hwaddr offset, unsigned int width)/* Flash area read */ ret =pflash_data_read (pfl, offset, width);break ; -case 0x90 : -/* flash ID read */ +case 0x90 :/* flash ID read */ switch (boff) {case 0x00 :case 0x01 :
@@ -364,11 +363,11 @@ static uint64_t pflash_read(void *opaque, hwaddr offset, unsigned int width) }DPRINTF ("%s: ID " TARGET_FMT_plx" %" PRIx64"\n" , __func__, boff, ret);break ; -case 0x10 : -case 0x30 : +case 0x10 :/* Chip Erase */ +case 0x30 :/* Sector Erase */ /* Toggle bit 2 during erase, but not program. */ toggle_dq2 (pfl); -case 0xA0 : +case 0xA0 :/* Program */ /* Toggle bit 6 */ toggle_dq6 (pfl);/* Status register read */
@@ -470,7 +469,7 @@ static void pflash_write(void *opaque, hwaddr offset, uint64_t value,return ; }/* Handle erase resume in erase suspend mode, otherwise reset. */ -if (cmd ==0x30 ) { +if (cmd ==0x30 ) {/* Erase Resume */ if (pflash_erase_suspend_mode (pfl)) {/* Resume the erase. */ timer_mod(&pfl->timer, qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) +
@@ -485,7 +484,7 @@ static void pflash_write(void *opaque, hwaddr offset, uint64_t value, goto reset_flash; }/* Ignore erase suspend. */ -if (cmd ==0xB0 ) { +if (cmd ==0xB0 ) {/* Erase Suspend */ return ; }if (boff != pfl->unlock_addr0 || cmd !=0xAA ) {
@@ -516,9 +515,9 @@ static void pflash_write(void *opaque, hwaddr offset, uint64_t value,case 0x20 : pfl->bypass =1 ; goto do_bypass; -case 0x80 : -case 0x90 : -case 0xA0 : +case 0x80 :/* Erase */ +case 0x90 :/* Autoselect */ +case 0xA0 :/* Program */ pfl->cmd = cmd;DPRINTF ("%s: starting command %02x\n" , __func__, cmd);break ;
@@ -529,10 +528,10 @@ static void pflash_write(void *opaque, hwaddr offset, uint64_t value,break ;case 3 :switch (pfl->cmd) { -case 0x80 : +case 0x80 :/* Erase */ /* We need another unlock sequence */ goto check_unlock0; -case 0xA0 : +case 0xA0 :/* Program */ if (pflash_erase_suspend_mode (pfl) &&pflash_sector_is_erasing (pfl, offset)) {/* Ignore writes to erasing sectors. */
@@ -562,7 +561,7 @@ static void pflash_write(void *opaque, hwaddr offset, uint64_t value,if (pfl->bypass) goto do_bypass; goto reset_flash; -case 0x90 : +case 0x90 :/* Autoselect */ if (pfl->bypass && cmd ==0x00 ) {/* Unlock bypass reset */ goto reset_flash;
@@ -585,11 +584,11 @@ static void pflash_write(void *opaque, hwaddr offset, uint64_t value, }case 4 :switch (pfl->cmd) { -case 0xA0 : +case 0xA0 :/* Program */ /* Ignore writes while flash data write is occurring */ /* As we suppose write is immediate, this should never happen */ return ; -case 0x80 : +case 0x80 :/* Erase */ goto check_unlock1;default :/* Should never happen */
@@ -604,7 +603,7 @@ static void pflash_write(void *opaque, hwaddr offset, uint64_t value, goto reset_flash; }switch (cmd) { -case 0x10 : +case 0x10 :/* Chip Erase */ if (boff != pfl->unlock_addr0) {DPRINTF ("%s: chip erase: invalid address " TARGET_FMT_plx"\n" , __func__, offset);
@@ -621,8 +620,7 @@ static void pflash_write(void *opaque, hwaddr offset, uint64_t value,timer_mod (&pfl->timer,qemu_clock_get_ns (QEMU_CLOCK_VIRTUAL ) + (1ULL << pfl->cfi_table[0x22 ]) *SCALE_MS );break ; -case 0x30 : -/* Sector erase */ +case 0x30 :/* Sector erase */ pflash_sector_erase (pfl, offset);break ;default :
@@ -633,10 +631,10 @@ static void pflash_write(void *opaque, hwaddr offset, uint64_t value,break ;case 6 :switch (pfl->cmd) { -case 0x10 : +case 0x10 :/* Chip Erase */ /* Ignore writes during chip erase */ return ; -case 0x30 : +case 0x30 :/* Sector erase */ if (cmd ==0xB0 ) {/* * If erase suspend happens during the erase timeout (so DQ3 is
Signature · 1 line
2.20.1
Re: [Qemu-devel] [PATCH v5 27/28] hw/block/pflash_cfi02: Document commands
Quoted 2 lines · Philippe Mathieu-Daudé
Signed-off-by Philippe Mathieu-Daudé <[email protected]>
Alistair
Quoted 145 lines
--- hw/block/pflash_cfi02.c | 40 +++++++++++++++++++--------------------- 1 file changed, 19 insertions(+), 21 deletions(-)hw/block/pflash_cfi02.c +19
-22@@ -327,7 +327,7 @@ static uint64_t pflash_read(void *opaque, hwaddr offset, unsigned int width) pfl->wcycle =0 ; pfl->cmd =0 ;/* fall through to the read code */ -case 0x80 : +case 0x80 :/* Erase (unlock) */ /* We accept reads during second unlock sequence... */ case 0x00 : if (pflash_erase_suspend_mode(pfl) &&@@ -342,8 +342,7 @@ static uint64_t pflash_read(void *opaque, hwaddr offset, unsigned int width)/* Flash area read */ ret =pflash_data_read (pfl, offset, width);break ; -case 0x90 : -/* flash ID read */ +case 0x90 :/* flash ID read */ switch (boff) {case 0x00 :case 0x01 :@@ -364,11 +363,11 @@ static uint64_t pflash_read(void *opaque, hwaddr offset, unsigned int width) }DPRINTF ("%s: ID " TARGET_FMT_plx" %" PRIx64"\n" , __func__, boff, ret);break ; -case 0x10 : -case 0x30 : +case 0x10 :/* Chip Erase */ +case 0x30 :/* Sector Erase */ /* Toggle bit 2 during erase, but not program. */ toggle_dq2 (pfl); -case 0xA0 : +case 0xA0 :/* Program */ /* Toggle bit 6 */ toggle_dq6 (pfl);/* Status register read */ @@ -470,7 +469,7 @@ static void pflash_write(void *opaque, hwaddr offset, uint64_t value,return ; }/* Handle erase resume in erase suspend mode, otherwise reset. */ -if (cmd ==0x30 ) { +if (cmd ==0x30 ) {/* Erase Resume */ if (pflash_erase_suspend_mode (pfl)) {/* Resume the erase. */ timer_mod(&pfl->timer, qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) +@@ -485,7 +484,7 @@ static void pflash_write(void *opaque, hwaddr offset, uint64_t value, goto reset_flash; }/* Ignore erase suspend. */ -if (cmd ==0xB0 ) { +if (cmd ==0xB0 ) {/* Erase Suspend */ return ; }if (boff != pfl->unlock_addr0 || cmd !=0xAA ) {@@ -516,9 +515,9 @@ static void pflash_write(void *opaque, hwaddr offset, uint64_t value,case 0x20 : pfl->bypass =1 ; goto do_bypass; -case 0x80 : -case 0x90 : -case 0xA0 : +case 0x80 :/* Erase */ +case 0x90 :/* Autoselect */ +case 0xA0 :/* Program */ pfl->cmd = cmd;DPRINTF ("%s: starting command %02x\n" , __func__, cmd);break ;@@ -529,10 +528,10 @@ static void pflash_write(void *opaque, hwaddr offset, uint64_t value,break ;case 3 :switch (pfl->cmd) { -case 0x80 : +case 0x80 :/* Erase */ /* We need another unlock sequence */ goto check_unlock0; -case 0xA0 : +case 0xA0 :/* Program */ if (pflash_erase_suspend_mode (pfl) &&pflash_sector_is_erasing (pfl, offset)) {/* Ignore writes to erasing sectors. */ @@ -562,7 +561,7 @@ static void pflash_write(void *opaque, hwaddr offset, uint64_t value,if (pfl->bypass) goto do_bypass; goto reset_flash; -case 0x90 : +case 0x90 :/* Autoselect */ if (pfl->bypass && cmd ==0x00 ) {/* Unlock bypass reset */ goto reset_flash;@@ -585,11 +584,11 @@ static void pflash_write(void *opaque, hwaddr offset, uint64_t value, }case 4 :switch (pfl->cmd) { -case 0xA0 : +case 0xA0 :/* Program */ /* Ignore writes while flash data write is occurring */ /* As we suppose write is immediate, this should never happen */ return ; -case 0x80 : +case 0x80 :/* Erase */ goto check_unlock1;default :/* Should never happen */ @@ -604,7 +603,7 @@ static void pflash_write(void *opaque, hwaddr offset, uint64_t value, goto reset_flash; }switch (cmd) { -case 0x10 : +case 0x10 :/* Chip Erase */ if (boff != pfl->unlock_addr0) {DPRINTF ("%s: chip erase: invalid address " TARGET_FMT_plx"\n" , __func__, offset);@@ -621,8 +620,7 @@ static void pflash_write(void *opaque, hwaddr offset, uint64_t value,timer_mod (&pfl->timer,qemu_clock_get_ns (QEMU_CLOCK_VIRTUAL ) + (1ULL << pfl->cfi_table[0x22 ]) *SCALE_MS );break ; -case 0x30 : -/* Sector erase */ +case 0x30 :/* Sector erase */ pflash_sector_erase (pfl, offset);break ;default :@@ -633,10 +631,10 @@ static void pflash_write(void *opaque, hwaddr offset, uint64_t value,break ;case 6 :switch (pfl->cmd) { -case 0x10 : +case 0x10 :/* Chip Erase */ /* Ignore writes during chip erase */ return ; -case 0x30 : +case 0x30 :/* Sector erase */ if (cmd ==0xB0 ) {/* * If erase suspend happens during the erase timeout (so DQ3 is -- 2.20.1
PATCH v5 28/28 hw/block/pflash_cfi02: Reduce I/O accesses to 16-bit
In reply to Philippe Mathieu-DaudéParallel NOR flashes are limited to 16-bit bus accesses. Remove the 32-bit dead code.
--- hw/block/pflash_cfi02.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-)
hw/block/pflash_cfi02.c +1 -4
@@ -317,8 +317,6 @@ static uint64_t pflash_read(void *opaque, hwaddr offset, unsigned int width) boff = offset &0xFF ;if (pfl->width ==2 ) { boff = boff >>1 ; - }else if (pfl->width ==4 ) { - boff = boff >>2 ; }switch (pfl->cmd) {default :
@@ -449,8 +447,6 @@ static void pflash_write(void *opaque, hwaddr offset, uint64_t value, boff = offset;if (pfl->width ==2 ) { boff = boff >>1 ; - }else if (pfl->width ==4 ) { - boff = boff >>2 ; }/* Only the least-significant 11 bits are used in most cases. */ boff &=0x7FF ;
@@ -710,6 +706,7 @@ static void pflash_write(void *opaque, hwaddr offset, uint64_t value,static const MemoryRegionOps pflash_cfi02_ops = { .read = pflash_read, .write = pflash_write, + .impl.max_access_size =2 , .valid.min_access_size =1 , .valid.max_access_size =4 , .endianness =DEVICE_NATIVE_ENDIAN ,
Signature · 1 line
2.20.1
Re: [Qemu-devel] [PATCH v5 28/28] hw/block/pflash_cfi02: Reduce I/O accesses to 16-bit
Quoted 5 lines · Philippe Mathieu-Daudé
Parallel NOR flashes are limited to 16-bit bus accesses. Remove the 32-bit dead code.
Signed-off-by Philippe Mathieu-Daudé <[email protected]>
Alistair
Quoted 38 lines
--- hw/block/pflash_cfi02.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-)hw/block/pflash_cfi02.c +1
-5@@ -317,8 +317,6 @@ static uint64_t pflash_read(void *opaque, hwaddr offset, unsigned int width) boff = offset &0xFF ;if (pfl->width ==2 ) { boff = boff >>1 ; - }else if (pfl->width ==4 ) { - boff = boff >>2 ; }switch (pfl->cmd) {default :@@ -449,8 +447,6 @@ static void pflash_write(void *opaque, hwaddr offset, uint64_t value, boff = offset;if (pfl->width ==2 ) { boff = boff >>1 ; - }else if (pfl->width ==4 ) { - boff = boff >>2 ; }/* Only the least-significant 11 bits are used in most cases. */ boff &=0x7FF ;@@ -710,6 +706,7 @@ static void pflash_write(void *opaque, hwaddr offset, uint64_t value,static const MemoryRegionOps pflash_cfi02_ops = { .read = pflash_read, .write = pflash_write, + .impl.max_access_size =2 , .valid.min_access_size =1 , .valid.max_access_size =4 , .endianness =DEVICE_NATIVE_ENDIAN , --2.20.1