Skip to contentSkip to conversation

board: Add support for iMX8MN BSH SMM S2 PRO

PATCH In review Michael Trimarchi 5 participants 10 messages Jan 31, 2022 – Apr 22, 2022 Arm i.MX and Layerscape

lore
Share & tools
lore
#0 lore raw

PATCH v3 1/1 board: Add support for iMX8MN BSH SMM S2 PRO

Add initial support for iMX8MN BSH SMM S2 PRO board:

- Linux: v5.17-rc1
- Uboot 2022-01-rc1 (reference tree)
- Default packages from buildroot

https://www.apertis.org/reference_hardware/imx8mn_bsh_smm_s2pro_setup/

Add Ariel D'Alessandro as co-maintainer, we work together on platform mainline

Build and tested using:
docker pull registry.gitlab.com/buildroot.org/buildroot/base:20220105.2314

Cc Ariel D'Alessandro <[email protected]>
Cc Jagan Teki <[email protected]>
Cc Heiko Thiery <[email protected]>
Cc Giulio Benetti <[email protected]>

---
Changes V2->V3:
- Update the uboot download point
- Add feedback from Heiko Thiery <[email protected]>
- Add feddback from Giulio Benetti
Changes V1->V2:
- add the board reference page
- test with docker
- adjust the buildroot config in order to use buildman

---
 DEVELOPERS                         |  2 ++
 board/bsh/bsh-imx8mn/extlinux.conf |  4 +++
 board/bsh/bsh-imx8mn/genimage.cfg  | 17 +++++++++
 board/bsh/bsh-imx8mn/post-build.sh |  7 ++++
 board/bsh/bsh-imx8mn/post-image.sh |  3 ++
 board/bsh/bsh-imx8mn/readme.txt    | 55 ++++++++++++++++++++++++++++++
 configs/bsh_smms2pro_defconfig     | 43 +++++++++++++++++++++++
 7 files changed, 131 insertions(+)
 create mode 100644 board/bsh/bsh-imx8mn/extlinux.conf
 create mode 100644 board/bsh/bsh-imx8mn/genimage.cfg
 create mode 100755 board/bsh/bsh-imx8mn/post-build.sh
 create mode 100755 board/bsh/bsh-imx8mn/post-image.sh
 create mode 100644 board/bsh/bsh-imx8mn/readme.txt
 create mode 100644 configs/bsh_smms2pro_defconfig
DEVELOPERS +2 -0
index fe8de1916e..fc66fb6b83 100644
@@ -220,6 +220,7 @@ F:	configs/snps_archs38_hsdk_defconfig
 F:	configs/snps_archs38_vdk_defconfig
 
 N:	Ariel D'Alessandro <[email protected]>
+F:	board/bsh/
 F:	package/axfsutils/
 F:	package/mali-t76x/
 
@@ -2018,6 +2019,7 @@ F:	package/python-crc16/
 F:	package/python-pyzmq/
 
 N:	Michael Trimarchi <[email protected]>
+F:	board/bsh/
 F:	package/python-spidev/
 
 N:	Michael Vetter <[email protected]>
board/bsh/bsh-imx8mn/extlinux.conf new file +4 -0
new file mode 100644
index 0000000000..9111354742
@@ -0,0 +1,4 @@
+label buildroot
+  kernel /boot/Image
+  devicetree /boot/freescale/imx8mn-bsh-smm-s2pro.dtb
+  append root=PARTUUID=%PARTUUID% rootwait rw
board/bsh/bsh-imx8mn/genimage.cfg new file +17 -0
new file mode 100644
index 0000000000..bc100b171d
@@ -0,0 +1,17 @@
+image sdcard.img {
+	hdimage {
+		partition-table-type = "gpt"
+	}
+
+	partition imx-boot {
+		in-partition-table = "no"
+		image = "flash.bin"
+		offset = 33K
+	}
+
+	partition rootfs {
+		offset = 8M
+		image = "rootfs.ext4"
+		partition-uuid = %PARTUUID%
+	}
+}
board/bsh/bsh-imx8mn/post-build.sh new file +7 -0
new file mode 100755
index 0000000000..bf8861f6a9
@@ -0,0 +1,7 @@
+#!/bin/sh
+BOARD_DIR="$(dirname $0)"
+PARTUUID="$($HOST_DIR/bin/uuidgen)"
+
+install -d "$TARGET_DIR/boot/extlinux/"
+sed "s/%PARTUUID%/$PARTUUID/g" "$BOARD_DIR/extlinux.conf" > "$TARGET_DIR/boot/extlinux/extlinux.conf"
+sed "s/%PARTUUID%/$PARTUUID/g" "$BOARD_DIR/genimage.cfg" > "$BINARIES_DIR/genimage.cfg"
board/bsh/bsh-imx8mn/post-image.sh new file +3 -0
new file mode 100755
index 0000000000..3452fd4501
@@ -0,0 +1,3 @@
+#!/bin/sh
+
+support/scripts/genimage.sh -c ${BINARIES_DIR}/genimage.cfg
board/bsh/bsh-imx8mn/readme.txt new file +55 -0

55 lines not on this page · raw message

configs/bsh_smms2pro_defconfig new file +43 -0

43 lines not on this page · raw message

Signature · 6 lines
2.25.1

_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot
Tested-by on v3 1/1
#1 lore raw

Hi Michael, all,

Quoted 14 lines · Michael Trimarchi

Add initial support for iMX8MN BSH SMM S2 PRO board:

- Linux: v5.17-rc1
- Uboot 2022-01-rc1 (reference tree)
- Default packages from buildroot

https://www.apertis.org/reference_hardware/imx8mn_bsh_smm_s2pro_setup/

Add Ariel D'Alessandro as co-maintainer, we work together on platform mainline

Build and tested using:
docker pull registry.gitlab.com/buildroot.org/buildroot/base:20220105.2314

Quoted 6 lines
Cc Ariel D'Alessandro <[email protected]>
Cc Jagan Teki <[email protected]>
Cc Heiko Thiery <[email protected]>
Cc Giulio Benetti <[email protected]>

_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot

#2 lore raw

Hi all

Should I need to resend? anything is missing now?

Michael

Quoted 26 lines · Ariel D'Alessandro

Hi Michael, all,

Quoted 14 lines · Michael Trimarchi

Add initial support for iMX8MN BSH SMM S2 PRO board:

- Linux: v5.17-rc1
- Uboot 2022-01-rc1 (reference tree)
- Default packages from buildroot

https://www.apertis.org/reference_hardware/imx8mn_bsh_smm_s2pro_setup/

Add Ariel D'Alessandro as co-maintainer, we work together on platform mainline

Build and tested using:
docker pull registry.gitlab.com/buildroot.org/buildroot/base:20220105.2314

Quoted 6 lines
Cc Ariel D'Alessandro <[email protected]>
Cc Jagan Teki <[email protected]>
Cc Heiko Thiery <[email protected]>
Cc Giulio Benetti <[email protected]>
Signature · 15 lines
Michael Nazzareno Trimarchi
Co-Founder & Chief Executive Officer
M. +39 347 913 2170
[email protected]
__________________________________

Amarula Solutions BV
Joop Geesinkweg 125, 1114 AB, Amsterdam, NL
T. +31 (0)85 111 9172
[email protected]
www.amarulasolutions.com
_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot
#3 lore raw

Hi Michael,

Quoted 5 lines

Il giorno 12 feb 2022, alle ore 11:12, Michael Nazzareno Trimarchi <[email protected]> ha scritto:

Hi all

Should I need to resend? anything is missing now?

No, only need to wait until maintainers submit it or find something I haven’t found(hope not).

Best regards
Giulio

Quoted 23 lines

Michael

Quoted 20 lines

On Mon, Jan 31, 2022 at 5:20 PM Ariel D'Alessandro <[email protected]> wrote:

Hi Michael, all,

Quoted 15 lines · Michael Trimarchi

Add initial support for iMX8MN BSH SMM S2 PRO board:

- Linux: v5.17-rc1
- Uboot 2022-01-rc1 (reference tree)
- Default packages from buildroot

https://www.apertis.org/reference_hardware/imx8mn_bsh_smm_s2pro_setup/

Add Ariel D'Alessandro as co-maintainer, we work together on platform mainline

Build and tested using:
docker pull registry.gitlab.com/buildroot.org/buildroot/base:20220105.2314

Quoted 23 lines
Quoted 8 lines
Quoted 6 lines
Cc Ariel D'Alessandro <[email protected]>
Cc Jagan Teki <[email protected]>
Cc Heiko Thiery <[email protected]>
Cc Giulio Benetti <[email protected]>
Signature · 11 lines
Michael Nazzareno Trimarchi
Co-Founder & Chief Executive Officer
M. +39 347 913 2170
[email protected]
__________________________________

Amarula Solutions BV
Joop Geesinkweg 125, 1114 AB, Amsterdam, NL
T. +31 (0)85 111 9172
[email protected]
www.amarulasolutions.com

_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot

#4 lore raw
In reply to Michael Trimarchi
Quoted 3 lines · Michael Trimarchi

Add initial support for iMX8MN BSH SMM S2 PRO board:

- Linux: v5.17-rc1

I'm a bit uncomfortable to add an -rc version. But I guess it can be updated
as soon as 5.17 is released.

Quoted 17 lines

- Uboot 2022-01-rc1 (reference tree)
- Default packages from buildroot

https://www.apertis.org/reference_hardware/imx8mn_bsh_smm_s2pro_setup/

Add Ariel D'Alessandro as co-maintainer, we work together on platform mainline

Build and tested using:
docker pull registry.gitlab.com/buildroot.org/buildroot/base:20220105.2314

Cc Ariel D'Alessandro <[email protected]>
Cc Jagan Teki <[email protected]>
Cc Heiko Thiery <[email protected]>
Cc Giulio Benetti <[email protected]>

[snip]

DEVELOPERS F: configs/snps_archs38_hsdk_defconfig · line 223

Quoted 9 lines
DEVELOPERS +1 -0
index fe8de1916e..fc66fb6b83 100644
@@ -220,6 +220,7 @@ F:	configs/snps_archs38_hsdk_defconfig
  F:	configs/snps_archs38_vdk_defconfig
 
  N:	Ariel D'Alessandro <[email protected]>
+F:	board/bsh/

You should also add configs/bsh_smms2pro_defconfig here.

Quoted 50 lines
DEVELOPERS +1 -0
  F:	package/axfsutils/
  F:	package/mali-t76x/
 
@@ -2018,6 +2019,7 @@ F:	package/python-crc16/
  F:	package/python-pyzmq/
 
  N:	Michael Trimarchi <[email protected]>
+F:	board/bsh/
  F:	package/python-spidev/
 
  N:	Michael Vetter <[email protected]>
board/bsh/bsh-imx8mn/extlinux.conf new file +4 -0
new file mode 100644
index 0000000000..9111354742
@@ -0,0 +1,4 @@
+label buildroot
+  kernel /boot/Image
+  devicetree /boot/freescale/imx8mn-bsh-smm-s2pro.dtb
+  append root=PARTUUID=%PARTUUID% rootwait rw
board/bsh/bsh-imx8mn/genimage.cfg new file +17 -0
new file mode 100644
index 0000000000..bc100b171d
@@ -0,0 +1,17 @@
+image sdcard.img {
+	hdimage {
+		partition-table-type = "gpt"
+	}
+
+	partition imx-boot {
+		in-partition-table = "no"
+		image = "flash.bin"
+		offset = 33K
+	}
+
+	partition rootfs {
+		offset = 8M
+		image = "rootfs.ext4"
+		partition-uuid = %PARTUUID%
+	}
+}
board/bsh/bsh-imx8mn/post-build.sh new file +0 -0
new file mode 100755
index 0000000000..bf8861f6a9

board/bsh/bsh-imx8mn/post-build.sh line 7

Quoted 7 lines
board/bsh/bsh-imx8mn/post-build.sh new file +7 -0
@@ -0,0 +1,7 @@
+#!/bin/sh
+BOARD_DIR="$(dirname $0)"
+PARTUUID="$($HOST_DIR/bin/uuidgen)"
+
+install -d "$TARGET_DIR/boot/extlinux/"
+sed "s/%PARTUUID%/$PARTUUID/g" "$BOARD_DIR/extlinux.conf" > "$TARGET_DIR/boot/extlinux/extlinux.conf"
+sed "s/%PARTUUID%/$PARTUUID/g" "$BOARD_DIR/genimage.cfg" > "$BINARIES_DIR/genimage.cfg"

This is really a great way of doing it!

Quoted 46 lines
board/bsh/bsh-imx8mn/post-image.sh new file +3 -0
new file mode 100755
index 0000000000..3452fd4501
@@ -0,0 +1,3 @@
+#!/bin/sh
+
+support/scripts/genimage.sh -c ${BINARIES_DIR}/genimage.cfg
board/bsh/bsh-imx8mn/readme.txt new file +31 -0
new file mode 100644
index 0000000000..ae30666cd0
@@ -0,0 +1,55 @@
+How to build it
+===============
+
+Configure buildroot:
+
+  $ make bsh_smms2pro_defconfig
+
+Change settings to fit your needs (optional):
+
+  $ make menuconfig
+
+Compile everything and buildr the rootfs image:
+
+  $ make
+
+
+Result of the build
+===================
+
+After building, the output/images directory contains:
+
+  output/images/
+    ├── bl31.bin
+    ├── Image
+    ├── flash.bin
+    ├── ddr3*
+    ├── rootfs.ext2
+    ├── rootfs.ext4 -> rootfs.ext2
+    ├── rootfs.tar
+    ├── sdcard.img
+    ├── u-boot.bin

board/bsh/bsh-imx8mn/readme.txt line 41

Quoted 10 lines
board/bsh/bsh-imx8mn/readme.txt new file +10 -0
+    ├── u-boot-nodtb.bin
+    └── u-boot-spl.bin
+
+
+Flashing the emmc card image
+==========================
+
+To install the image on on eMMC
+
+  $ sudo uuu -b emmc_all output/images/flash.bin output/images/sdcard.img

Please also explain where you get uuu. Can we build it as part of buildroot?
Then refer to it as output/host/bin/uuu.

Quoted 20 lines
board/bsh/bsh-imx8mn/readme.txt new file +14 -0
+
+
+Preparing the board
+===================
+
+ * Connect a serial line to the board
+ * Power-up the board
+
+
+Booting the board
+=================
+
+By default the bootloader will search for the first valid image, starting
+with the internal eMMC.
configs/bsh_smms2pro_defconfig new file +0 -0
new file mode 100644
index 0000000000..9fd7fb8e7c

configs/bsh_smms2pro_defconfig line 1

Quoted 1 line
configs/bsh_smms2pro_defconfig new file +1 -0
@@ -0,0 +1,43 @@
+BR2_aarch64=y

Even if the default happens to be correct, I prefer the subarch to be
specified explicitly. That way we can change the default later without affecting this defconfig.

configs/bsh_smms2pro_defconfig line 5

Quoted 4 lines
configs/bsh_smms2pro_defconfig new file +4 -0
+BR2_TARGET_GENERIC_GETTY_PORT="ttymxc3"
+BR2_ROOTFS_POST_BUILD_SCRIPT="board/bsh/bsh-imx8mn/post-build.sh"
+BR2_ROOTFS_POST_IMAGE_SCRIPT="board/bsh/bsh-imx8mn/post-image.sh"
+BR2_ROOTFS_POST_SCRIPT_ARGS="${UBOOT_DIR}/arch/arm/dts/imx8mn-bsh-smm-s2pro.dtb"

I may be missing something, but this doesn't seem to be used by any of the
post- scripts?

configs/bsh_smms2pro_defconfig line 9

Quoted 4 lines
configs/bsh_smms2pro_defconfig new file +4 -0
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_GIT=y
+BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git"
+BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="v5.17-rc1"

Please use the tarball instead. Simply setting CUSTOM_VERSION should be
sufficient - if not, linux.mk has tobe fixed.

Quoted 12 lines
configs/bsh_smms2pro_defconfig new file +12 -0
+BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y
+BR2_LINUX_KERNEL_DTS_SUPPORT=y
+BR2_LINUX_KERNEL_INTREE_DTS_NAME="freescale/imx8mn-bsh-smm-s2pro"
+BR2_LINUX_KERNEL_DTB_KEEP_DIRNAME=y
+BR2_LINUX_KERNEL_INSTALL_TARGET=y
+BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
+BR2_PACKAGE_FREESCALE_IMX=y
+BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8MN=y
+BR2_PACKAGE_FIRMWARE_IMX=y
+BR2_PACKAGE_FIRMWARE_IMX_DDR3=y
+BR2_TARGET_ROOTFS_EXT2=y
+BR2_TARGET_ROOTFS_EXT2_4=y

configs/bsh_smms2pro_defconfig line 31

Quoted 10 lines
configs/bsh_smms2pro_defconfig new file +10 -0
+BR2_TARGET_ROOTFS_EXT2_SIZE="120M"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE=y
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION=y
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION_VALUE="v2.5"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="imx8mn"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_ADDITIONAL_VARIABLES="IMX_BOOT_UART_BASE=0x30a60000"
+BR2_TARGET_UBOOT=y
+BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
+BR2_TARGET_UBOOT_CUSTOM_GIT=y
+BR2_TARGET_UBOOT_CUSTOM_REPO_URL="https://gitlab.apertis.org/adalessandro/u-boot.git"

Gitlab is able to generate tarballs as well. There are plenty of examples in
the tree.

I would normally fix these things up while applying, but since I'm not
entirely sure about merging a -rc kernel anyway, I'll wait for a v4 instead.

Oh, one more thing: the subject for a new defconfig is typically
"configs/bsh_smms2pro_defconfig: new defconfig"

Regards,
Arnout

configs/bsh_smms2pro_defconfig line 43

Quoted 12 lines
configs/bsh_smms2pro_defconfig new file +12 -0
+BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="v2022.01-bsh-smm2"
+BR2_TARGET_UBOOT_BOARD_DEFCONFIG="imx8mn_bsh_smm_s2pro"
+BR2_TARGET_UBOOT_NEEDS_DTC=y
+BR2_TARGET_UBOOT_NEEDS_PYTHON3=y
+BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y
+BR2_TARGET_UBOOT_NEEDS_OPENSSL=y
+BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y
+BR2_TARGET_UBOOT_NEEDS_IMX_FIRMWARE=y
+BR2_TARGET_UBOOT_FORMAT_CUSTOM=y
+BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="flash.bin"
+BR2_TARGET_UBOOT_SPL=y
+BR2_PACKAGE_HOST_GENIMAGE=y

_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot

#5 lore raw

Hi

Quoted 10 lines · Arnout Vandecappelle
Quoted 3 lines · Michael Trimarchi

Add initial support for iMX8MN BSH SMM S2 PRO board:

- Linux: v5.17-rc1

I'm a bit uncomfortable to add an -rc version. But I guess it can be updated
as soon as 5.17 is released.

Ok, I will then wait

Quoted 82 lines
Quoted 18 lines

- Uboot 2022-01-rc1 (reference tree)
- Default packages from buildroot

https://www.apertis.org/reference_hardware/imx8mn_bsh_smm_s2pro_setup/

Add Ariel D'Alessandro as co-maintainer, we work together on platform mainline

Build and tested using:
docker pull registry.gitlab.com/buildroot.org/buildroot/base:20220105.2314

Cc Ariel D'Alessandro <[email protected]>
Cc Jagan Teki <[email protected]>
Cc Heiko Thiery <[email protected]>
Cc Giulio Benetti <[email protected]>

[snip]

DEVELOPERS F: configs/snps_archs38_hsdk_defconfig · line 223

Quoted 9 lines
DEVELOPERS +1 -0
index fe8de1916e..fc66fb6b83 100644
@@ -220,6 +220,7 @@ F:        configs/snps_archs38_hsdk_defconfig
  F:  configs/snps_archs38_vdk_defconfig
 
  N:  Ariel D'Alessandro <[email protected]>
+F:   board/bsh/

You should also add configs/bsh_smms2pro_defconfig here.

Quoted 51 lines
DEVELOPERS +1 -0
  F:  package/axfsutils/
  F:  package/mali-t76x/
 
@@ -2018,6 +2019,7 @@ F:      package/python-crc16/
  F:  package/python-pyzmq/
 
  N:  Michael Trimarchi <[email protected]>
+F:   board/bsh/
  F:  package/python-spidev/
 
  N:  Michael Vetter <[email protected]>
board/bsh/bsh-imx8mn/extlinux.conf new file +4 -0
new file mode 100644
index 0000000000..9111354742
@@ -0,0 +1,4 @@
+label buildroot
+  kernel /boot/Image
+  devicetree /boot/freescale/imx8mn-bsh-smm-s2pro.dtb
+  append root=PARTUUID=%PARTUUID% rootwait rw
board/bsh/bsh-imx8mn/genimage.cfg new file +17 -0
new file mode 100644
index 0000000000..bc100b171d
@@ -0,0 +1,17 @@
+image sdcard.img {
+     hdimage {
+             partition-table-type = "gpt"
+     }
+
+     partition imx-boot {
+             in-partition-table = "no"
+             image = "flash.bin"
+             offset = 33K
+     }
+
+     partition rootfs {
+             offset = 8M
+             image = "rootfs.ext4"
+             partition-uuid = %PARTUUID%
+     }
+}
board/bsh/bsh-imx8mn/post-build.sh new file +1 -0
new file mode 100755
index 0000000000..bf8861f6a9
@@ -0,0 +1,7 @@
+#!/bin/sh
Quoted 9 lines

board/bsh/bsh-imx8mn/post-build.sh line 7

Quoted 6 lines
board/bsh/bsh-imx8mn/post-build.sh new file +6 -0
+BOARD_DIR="$(dirname $0)"
+PARTUUID="$($HOST_DIR/bin/uuidgen)"
+
+install -d "$TARGET_DIR/boot/extlinux/"
+sed "s/%PARTUUID%/$PARTUUID/g" "$BOARD_DIR/extlinux.conf" > "$TARGET_DIR/boot/extlinux/extlinux.conf"
+sed "s/%PARTUUID%/$PARTUUID/g" "$BOARD_DIR/genimage.cfg" > "$BINARIES_DIR/genimage.cfg"

This is really a great way of doing it!

Well, I have taken from another submitted board

Quoted 51 lines
Quoted 51 lines
board/bsh/bsh-imx8mn/post-image.sh new file +3 -0
new file mode 100755
index 0000000000..3452fd4501
@@ -0,0 +1,3 @@
+#!/bin/sh
+
+support/scripts/genimage.sh -c ${BINARIES_DIR}/genimage.cfg
board/bsh/bsh-imx8mn/readme.txt new file +36 -0
new file mode 100644
index 0000000000..ae30666cd0
@@ -0,0 +1,55 @@
+How to build it
+===============
+
+Configure buildroot:
+
+  $ make bsh_smms2pro_defconfig
+
+Change settings to fit your needs (optional):
+
+  $ make menuconfig
+
+Compile everything and buildr the rootfs image:
+
+  $ make
+
+
+Result of the build
+===================
+
+After building, the output/images directory contains:
+
+  output/images/
+    ├── bl31.bin
+    ├── Image
+    ├── flash.bin
+    ├── ddr3*
+    ├── rootfs.ext2
+    ├── rootfs.ext4 -> rootfs.ext2
+    ├── rootfs.tar
+    ├── sdcard.img
+    ├── u-boot.bin
+    ├── u-boot-nodtb.bin
+    └── u-boot-spl.bin
+
+
+Flashing the emmc card image
Quoted 8 lines

board/bsh/bsh-imx8mn/readme.txt line 41

Quoted 5 lines
board/bsh/bsh-imx8mn/readme.txt new file +5 -0
+==========================
+
+To install the image on on eMMC
+
+  $ sudo uuu -b emmc_all output/images/flash.bin output/images/sdcard.img

Please also explain where you get uuu. Can we build it as part of buildroot?
Then refer to it as output/host/bin/uuu.

Ok I will update it

Quoted 27 lines
Quoted 21 lines
board/bsh/bsh-imx8mn/readme.txt new file +14 -0
+
+
+Preparing the board
+===================
+
+ * Connect a serial line to the board
+ * Power-up the board
+
+
+Booting the board
+=================
+
+By default the bootloader will search for the first valid image, starting
+with the internal eMMC.
configs/bsh_smms2pro_defconfig new file +0 -0
new file mode 100644
index 0000000000..9fd7fb8e7c

configs/bsh_smms2pro_defconfig line 1

Quoted 1 line
configs/bsh_smms2pro_defconfig new file +1 -0
@@ -0,0 +1,43 @@
+BR2_aarch64=y

Even if the default happens to be correct, I prefer the subarch to be
specified explicitly. That way we can change the default later without affecting this defconfig.

Quoted 7 lines

configs/bsh_smms2pro_defconfig line 5

Quoted 4 lines
configs/bsh_smms2pro_defconfig new file +4 -0
+BR2_TARGET_GENERIC_GETTY_PORT="ttymxc3"
+BR2_ROOTFS_POST_BUILD_SCRIPT="board/bsh/bsh-imx8mn/post-build.sh"
+BR2_ROOTFS_POST_IMAGE_SCRIPT="board/bsh/bsh-imx8mn/post-image.sh"
+BR2_ROOTFS_POST_SCRIPT_ARGS="${UBOOT_DIR}/arch/arm/dts/imx8mn-bsh-smm-s2pro.dtb"

I may be missing something, but this doesn't seem to be used by any of the
post- scripts?

Ok

Quoted 8 lines

configs/bsh_smms2pro_defconfig line 9

Quoted 5 lines
configs/bsh_smms2pro_defconfig new file +4 -0
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_GIT=y
+BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git"
+BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="v5.17-rc1"

Please use the tarball instead. Simply setting CUSTOM_VERSION should be
sufficient - if not, linux.mk has tobe fixed.

Ok

Quoted 28 lines
Quoted 13 lines
configs/bsh_smms2pro_defconfig new file +12 -0
+BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y
+BR2_LINUX_KERNEL_DTS_SUPPORT=y
+BR2_LINUX_KERNEL_INTREE_DTS_NAME="freescale/imx8mn-bsh-smm-s2pro"
+BR2_LINUX_KERNEL_DTB_KEEP_DIRNAME=y
+BR2_LINUX_KERNEL_INSTALL_TARGET=y
+BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
+BR2_PACKAGE_FREESCALE_IMX=y
+BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8MN=y
+BR2_PACKAGE_FIRMWARE_IMX=y
+BR2_PACKAGE_FIRMWARE_IMX_DDR3=y
+BR2_TARGET_ROOTFS_EXT2=y
+BR2_TARGET_ROOTFS_EXT2_4=y

configs/bsh_smms2pro_defconfig line 31

Quoted 10 lines
configs/bsh_smms2pro_defconfig new file +10 -0
+BR2_TARGET_ROOTFS_EXT2_SIZE="120M"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE=y
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION=y
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION_VALUE="v2.5"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="imx8mn"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_ADDITIONAL_VARIABLES="IMX_BOOT_UART_BASE=0x30a60000"
+BR2_TARGET_UBOOT=y
+BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
+BR2_TARGET_UBOOT_CUSTOM_GIT=y
+BR2_TARGET_UBOOT_CUSTOM_REPO_URL="https://gitlab.apertis.org/adalessandro/u-boot.git"

Gitlab is able to generate tarballs as well. There are plenty of examples in
the tree.

Quoted 3 lines

I would normally fix these things up while applying, but since I'm not
entirely sure about merging a -rc kernel anyway, I'll wait for a v4 instead.

I will prepare v4

Michael

Quoted 18 lines

Oh, one more thing: the subject for a new defconfig is typically
"configs/bsh_smms2pro_defconfig: new defconfig"

Regards,
Arnout

Quoted 12 lines
configs/bsh_smms2pro_defconfig new file +12 -0
+BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="v2022.01-bsh-smm2"
+BR2_TARGET_UBOOT_BOARD_DEFCONFIG="imx8mn_bsh_smm_s2pro"
+BR2_TARGET_UBOOT_NEEDS_DTC=y
+BR2_TARGET_UBOOT_NEEDS_PYTHON3=y
+BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y
+BR2_TARGET_UBOOT_NEEDS_OPENSSL=y
+BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y
+BR2_TARGET_UBOOT_NEEDS_IMX_FIRMWARE=y
+BR2_TARGET_UBOOT_FORMAT_CUSTOM=y
+BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="flash.bin"
+BR2_TARGET_UBOOT_SPL=y
+BR2_PACKAGE_HOST_GENIMAGE=y
Signature · 15 lines
Michael Nazzareno Trimarchi
Co-Founder & Chief Executive Officer
M. +39 347 913 2170
[email protected]
__________________________________

Amarula Solutions BV
Joop Geesinkweg 125, 1114 AB, Amsterdam, NL
T. +31 (0)85 111 9172
[email protected]
www.amarulasolutions.com
_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot
#6 lore raw
Quoted 7 lines · Michael Nazzareno Trimarchi

Hi

Quoted 4 lines · Arnout Vandecappelle

On 31/01/2022 15:55, Michael Trimarchi wrote:

Quoted 8 lines
Quoted 6 lines
Quoted 3 lines

Add initial support for iMX8MN BSH SMM S2 PRO board:

- Linux: v5.17-rc1

I'm a bit uncomfortable to add an -rc version. But I guess it can be updated
as soon as 5.17 is released.

Ok, I will then wait

No, what I meant to say is: it's OK to do it with the -rc, just make sure that
you update it to the release version when it comes around (which will still be another 8-ish weeks).

If we still manage to merge this board before 2022.02, we'll just backport the
bump to the LTS branch.

Regards,
Arnout

[snip]

_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot

#7 lore raw
Quoted 19 lines · Arnout Vandecappelle
Quoted 16 lines · Michael Nazzareno Trimarchi

Hi

Quoted 11 lines · Arnout Vandecappelle
Quoted 3 lines · Michael Trimarchi

Add initial support for iMX8MN BSH SMM S2 PRO board:

- Linux: v5.17-rc1

   I'm a bit uncomfortable to add an -rc version. But I guess it can be updated
as soon as 5.17 is released.

Quoted 5 lines
Quoted 1 line

Ok, I will then wait

 No, what I meant to say is: it's OK to do it with the -rc, just make sure that you update it to the release version when it comes around (which will still be another 8-ish weeks).

Support is now almost completely merged upstream for kernel and u-boot. We could update the patch to pull from:

* linux: v5.17 (audio for this board is enabled in v5.18-rc3)
* u-boot: v2022.07-rc1 (released on Mon 25 April 2022, 2 days remaining)

We can update later on the linux release to include to whole support and at least we can get rid of the custom u-boot repo/branch.

Regards,
Ariel
_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot

#8 lore raw

Hi Ariel

Quoted 29 lines · Ariel D'Alessandro
Quoted 19 lines · Arnout Vandecappelle
Quoted 16 lines · Michael Nazzareno Trimarchi

Hi

Quoted 11 lines · Arnout Vandecappelle
Quoted 3 lines · Michael Trimarchi

Add initial support for iMX8MN BSH SMM S2 PRO board:

- Linux: v5.17-rc1

I'm a bit uncomfortable to add an -rc version. But I guess it can
be updated
as soon as 5.17 is released.

Quoted 5 lines
Quoted 1 line

Ok, I will then wait

No, what I meant to say is: it's OK to do it with the -rc, just make
sure that you update it to the release version when it comes around (which will still be another 8-ish weeks).

Quoted 9 lines

Support is now almost completely merged upstream for kernel and u-boot. We could update the patch to pull from:

* linux: v5.17 (audio for this board is enabled in v5.18-rc3)
* u-boot: v2022.07-rc1 (released on Mon 25 April 2022, 2 days remaining)

We can update later on the linux release to include to whole support and at least we can get rid of the custom u-boot repo/branch.

Ok, sorry I was busy. I will resend them with your suggestion

Michael

Quoted 2 lines

Regards,
Ariel

Signature · 15 lines
Michael Nazzareno Trimarchi
Co-Founder & Chief Executive Officer
M. +39 347 913 2170
[email protected]
__________________________________

Amarula Solutions BV
Joop Geesinkweg 125, 1114 AB, Amsterdam, NL
T. +31 (0)85 111 9172
[email protected]
www.amarulasolutions.com
_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot
#9 lore raw
In reply to Arnout Vandecappelle

Hi,

Am Sa., 12. Feb. 2022 um 13:10 Uhr schrieb Arnout Vandecappelle <[email protected]>:

Quoted 92 lines · Michael Trimarchi
Quoted 3 lines

Add initial support for iMX8MN BSH SMM S2 PRO board:

- Linux: v5.17-rc1

I'm a bit uncomfortable to add an -rc version. But I guess it can be updated
as soon as 5.17 is released.

Quoted 17 lines

- Uboot 2022-01-rc1 (reference tree)
- Default packages from buildroot

https://www.apertis.org/reference_hardware/imx8mn_bsh_smm_s2pro_setup/

Add Ariel D'Alessandro as co-maintainer, we work together on platform mainline

Build and tested using:
docker pull registry.gitlab.com/buildroot.org/buildroot/base:20220105.2314

Cc Ariel D'Alessandro <[email protected]>
Cc Jagan Teki <[email protected]>
Cc Heiko Thiery <[email protected]>
Cc Giulio Benetti <[email protected]>

[snip]

DEVELOPERS F: configs/snps_archs38_hsdk_defconfig · line 223

Quoted 9 lines
DEVELOPERS +1 -0
index fe8de1916e..fc66fb6b83 100644
@@ -220,6 +220,7 @@ F:        configs/snps_archs38_hsdk_defconfig
  F:  configs/snps_archs38_vdk_defconfig
 
  N:  Ariel D'Alessandro <[email protected]>
+F:   board/bsh/

You should also add configs/bsh_smms2pro_defconfig here.

Quoted 51 lines
DEVELOPERS +1 -0
  F:  package/axfsutils/
  F:  package/mali-t76x/
 
@@ -2018,6 +2019,7 @@ F:      package/python-crc16/
  F:  package/python-pyzmq/
 
  N:  Michael Trimarchi <[email protected]>
+F:   board/bsh/
  F:  package/python-spidev/
 
  N:  Michael Vetter <[email protected]>
board/bsh/bsh-imx8mn/extlinux.conf new file +4 -0
new file mode 100644
index 0000000000..9111354742
@@ -0,0 +1,4 @@
+label buildroot
+  kernel /boot/Image
+  devicetree /boot/freescale/imx8mn-bsh-smm-s2pro.dtb
+  append root=PARTUUID=%PARTUUID% rootwait rw
board/bsh/bsh-imx8mn/genimage.cfg new file +17 -0
new file mode 100644
index 0000000000..bc100b171d
@@ -0,0 +1,17 @@
+image sdcard.img {
+     hdimage {
+             partition-table-type = "gpt"
+     }
+
+     partition imx-boot {
+             in-partition-table = "no"
+             image = "flash.bin"
+             offset = 33K
+     }
+
+     partition rootfs {
+             offset = 8M
+             image = "rootfs.ext4"
+             partition-uuid = %PARTUUID%
+     }
+}
board/bsh/bsh-imx8mn/post-build.sh new file +1 -0
new file mode 100755
index 0000000000..bf8861f6a9
@@ -0,0 +1,7 @@
+#!/bin/sh
Quoted 8 lines

board/bsh/bsh-imx8mn/post-build.sh line 7

Quoted 6 lines
board/bsh/bsh-imx8mn/post-build.sh new file +6 -0
+BOARD_DIR="$(dirname $0)"
+PARTUUID="$($HOST_DIR/bin/uuidgen)"
+
+install -d "$TARGET_DIR/boot/extlinux/"
+sed "s/%PARTUUID%/$PARTUUID/g" "$BOARD_DIR/extlinux.conf" > "$TARGET_DIR/boot/extlinux/extlinux.conf"
+sed "s/%PARTUUID%/$PARTUUID/g" "$BOARD_DIR/genimage.cfg" > "$BINARIES_DIR/genimage.cfg"

This is really a great way of doing it!

There was already a comment about that topic from Thomas:
https://lists.buildroot.org/pipermail/buildroot/2022-January/634308.html

Quoted 87 lines
Quoted 47 lines
board/bsh/bsh-imx8mn/post-image.sh new file +3 -0
new file mode 100755
index 0000000000..3452fd4501
@@ -0,0 +1,3 @@
+#!/bin/sh
+
+support/scripts/genimage.sh -c ${BINARIES_DIR}/genimage.cfg
board/bsh/bsh-imx8mn/readme.txt new file +31 -0
new file mode 100644
index 0000000000..ae30666cd0
@@ -0,0 +1,55 @@
+How to build it
+===============
+
+Configure buildroot:
+
+  $ make bsh_smms2pro_defconfig
+
+Change settings to fit your needs (optional):
+
+  $ make menuconfig
+
+Compile everything and buildr the rootfs image:
+
+  $ make
+
+
+Result of the build
+===================
+
+After building, the output/images directory contains:
+
+  output/images/
+    ├── bl31.bin
+    ├── Image
+    ├── flash.bin
+    ├── ddr3*
+    ├── rootfs.ext2
+    ├── rootfs.ext4 -> rootfs.ext2
+    ├── rootfs.tar
+    ├── sdcard.img
+    ├── u-boot.bin

board/bsh/bsh-imx8mn/readme.txt line 41

Quoted 10 lines
board/bsh/bsh-imx8mn/readme.txt new file +10 -0
+    ├── u-boot-nodtb.bin
+    └── u-boot-spl.bin
+
+
+Flashing the emmc card image
+==========================
+
+To install the image on on eMMC
+
+  $ sudo uuu -b emmc_all output/images/flash.bin output/images/sdcard.img

Please also explain where you get uuu. Can we build it as part of buildroot?
Then refer to it as output/host/bin/uuu.

Quoted 20 lines
board/bsh/bsh-imx8mn/readme.txt new file +14 -0
+
+
+Preparing the board
+===================
+
+ * Connect a serial line to the board
+ * Power-up the board
+
+
+Booting the board
+=================
+
+By default the bootloader will search for the first valid image, starting
+with the internal eMMC.
configs/bsh_smms2pro_defconfig new file +0 -0
new file mode 100644
index 0000000000..9fd7fb8e7c

configs/bsh_smms2pro_defconfig line 1

Quoted 1 line
configs/bsh_smms2pro_defconfig new file +1 -0
@@ -0,0 +1,43 @@
+BR2_aarch64=y

Even if the default happens to be correct, I prefer the subarch to be
specified explicitly. That way we can change the default later without affecting this defconfig.

Quoted 7 lines

configs/bsh_smms2pro_defconfig line 5

Quoted 4 lines
configs/bsh_smms2pro_defconfig new file +4 -0
+BR2_TARGET_GENERIC_GETTY_PORT="ttymxc3"
+BR2_ROOTFS_POST_BUILD_SCRIPT="board/bsh/bsh-imx8mn/post-build.sh"
+BR2_ROOTFS_POST_IMAGE_SCRIPT="board/bsh/bsh-imx8mn/post-image.sh"
+BR2_ROOTFS_POST_SCRIPT_ARGS="${UBOOT_DIR}/arch/arm/dts/imx8mn-bsh-smm-s2pro.dtb"

I may be missing something, but this doesn't seem to be used by any of the
post- scripts?

This seems to be a leftover from the state where "board/freescale/common/imx/imx8-bootloader-prepare.sh" was used to generate the imx flash image. Now this is done by u-boot using binman Therefore this argument is no longer needed.

Quoted 57 lines

configs/bsh_smms2pro_defconfig line 9

Quoted 5 lines
configs/bsh_smms2pro_defconfig new file +4 -0
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_GIT=y
+BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git"
+BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="v5.17-rc1"

Please use the tarball instead. Simply setting CUSTOM_VERSION should be
sufficient - if not, linux.mk has tobe fixed.

Quoted 12 lines
configs/bsh_smms2pro_defconfig new file +12 -0
+BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y
+BR2_LINUX_KERNEL_DTS_SUPPORT=y
+BR2_LINUX_KERNEL_INTREE_DTS_NAME="freescale/imx8mn-bsh-smm-s2pro"
+BR2_LINUX_KERNEL_DTB_KEEP_DIRNAME=y
+BR2_LINUX_KERNEL_INSTALL_TARGET=y
+BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
+BR2_PACKAGE_FREESCALE_IMX=y
+BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8MN=y
+BR2_PACKAGE_FIRMWARE_IMX=y
+BR2_PACKAGE_FIRMWARE_IMX_DDR3=y
+BR2_TARGET_ROOTFS_EXT2=y
+BR2_TARGET_ROOTFS_EXT2_4=y

configs/bsh_smms2pro_defconfig line 31

Quoted 10 lines
configs/bsh_smms2pro_defconfig new file +10 -0
+BR2_TARGET_ROOTFS_EXT2_SIZE="120M"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE=y
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION=y
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION_VALUE="v2.5"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="imx8mn"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_ADDITIONAL_VARIABLES="IMX_BOOT_UART_BASE=0x30a60000"
+BR2_TARGET_UBOOT=y
+BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
+BR2_TARGET_UBOOT_CUSTOM_GIT=y
+BR2_TARGET_UBOOT_CUSTOM_REPO_URL="https://gitlab.apertis.org/adalessandro/u-boot.git"

Gitlab is able to generate tarballs as well. There are plenty of examples in
the tree.

I would normally fix these things up while applying, but since I'm not
entirely sure about merging a -rc kernel anyway, I'll wait for a v4 instead.

Oh, one more thing: the subject for a new defconfig is typically
"configs/bsh_smms2pro_defconfig: new defconfig"

Regards,
Arnout

Quoted 12 lines
configs/bsh_smms2pro_defconfig new file +12 -0
+BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="v2022.01-bsh-smm2"
+BR2_TARGET_UBOOT_BOARD_DEFCONFIG="imx8mn_bsh_smm_s2pro"
+BR2_TARGET_UBOOT_NEEDS_DTC=y
+BR2_TARGET_UBOOT_NEEDS_PYTHON3=y
+BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y
+BR2_TARGET_UBOOT_NEEDS_OPENSSL=y
+BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y
+BR2_TARGET_UBOOT_NEEDS_IMX_FIRMWARE=y
+BR2_TARGET_UBOOT_FORMAT_CUSTOM=y
+BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="flash.bin"
+BR2_TARGET_UBOOT_SPL=y
+BR2_PACKAGE_HOST_GENIMAGE=y
Signature · 5 lines
Heiko
_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot