IP32 power button fix for 2.6.30
PATCH 1/1 IP32 power button fix for 2.6.30
I think i run into same sort of problem, as described here:
http://lkml.org/lkml/2009/4/16/24
http://lkml.org/lkml/2009/4/14/94
(in my case it was hang after pressing O2's power button)
this patch fixes it:
----
arch/mips/sgi-ip32/ip32-reset.c +1 -1
@@ -145,7 +145,7 @@ static irqreturn_t ip32_rtc_int(int irq, void *dev_id) "%s: RTC IRQ without RTC_IRQF\n", __func__); }/* Wait until interrupt goes away */ -disable_irq (MACEISA_RTC_IRQ ); +disable_irq_nosync (MACEISA_RTC_IRQ );init_timer (&debounce_timer); debounce_timer.function = debounce; debounce_timer.expires = jiffies +50 ;
----
tested with 2.6.30-rc5 mainline (linux-mips.org tree was also affected)
Quoted 18 lines · Andrew Randrianasulu
X-Mailer: YahooMailClassic/5.2.20 YahooMailWebService/0.7.289.1
I think i run into same sort of problem, as described here:
http://lkml.org/lkml/2009/4/16/24
http://lkml.org/lkml/2009/4/14/94(in my case it was hang after pressing O2's power button)
this patch fixes it:
----
arch/mips/sgi-ip32/ip32-reset.c +0
-0
arch/mips/sgi-ip32/ip32-reset.c static irqreturn_t ip32_rtc_int(int irq, void *dev_id) · line 151
Quoted 8 lines
arch/mips/sgi-ip32/ip32-reset.c +1
-1@@ -145,7 +145,7 @@ static irqreturn_t ip32_rtc_int(int irq, void *dev_id) "%s: RTC IRQ without RTC_IRQF\n", __func__); }/* Wait until interrupt goes away */ -disable_irq (MACEISA_RTC_IRQ ); +disable_irq_nosync (MACEISA_RTC_IRQ );init_timer (&debounce_timer); debounce_timer.function = debounce; debounce_timer.expires = jiffies +50 ;
- no Signed-off-by: line
- whitespace garbled. Use a proper mail client such as /bin/mail ;-)
Grumblingly applied,
Ralf
Quoted 1 line · Ralf Baechle
Use a proper mail client such as
/bin/mail;-)
Err... Maybe it's still too hard to not wrap /usr/bin/git-send-email around /bin/mail ;-)
Dmitri