ARM: dts: rockchip: add reg property to brcmf sub node for rk3188-bqedison2qc
Subsystems (2)
PATCH 1/1 ARM: dts: rockchip: add reg property to brcmf sub node for rk3188-bqedison2qc
An experimental test with the command below gives this error:rk3188-bqedison2qc.dt.yaml: dwmmc@10218000: wifi@1:
'reg' is a required property
So fix this by adding a reg property to the brcmf sub node. Also add #address-cells and #size-cells to prevent more warnings.
make ARCH=arm dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.yaml
--- arch/arm/boot/dts/rk3188-bqedison2qc.dts | 3 +++ 1 file changed, 3 insertions(+)
arch/arm/boot/dts/rk3188-bqedison2qc.dts +3 -0
@@ -466,9 +466,12 @@ pinctrl-names = "default"; pinctrl-0 = <&sd1_clk>, <&sd1_cmd>, <&sd1_bus4>; vmmcq-supply = <&vccio_wl>; + #address-cells = <1>; + #size-cells = <0>; status = "okay"; brcmf: wifi@1 { + reg = <1>; compatible = "brcm,bcm4329-fmac"; interrupt-parent = <&gpio3>; interrupts = <RK_PD2 GPIO_ACTIVE_HIGH>;
Signature · 1 line
2.11.0
Heiko Stuebner
maintainerAm Freitag, 10. Januar 2020, 14:44:20 CET schrieb Johan Jonker:
Quoted 11 lines
An experimental test with the command below gives this error:
rk3188-bqedison2qc.dt.yaml: dwmmc@10218000: wifi@1:
'reg' is a required propertySo fix this by adding a reg property to the brcmf sub node. Also add #address-cells and #size-cells to prevent more warnings.
make ARCH=arm
dtbs_checkDT_SCHEMA_FILES=Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.yamlSigned-off-by Johan Jonker <[email protected]>
applied for 5.6
Thanks
Heiko