Skip to contentSkip to conversation

ACPI: processor: Rearrange and clean up acpi_processor_errata_piix4()

PATCH New Rafael J. Wysocki 1 participant 1 message Mar 31 ACPI

lore
Share & tools
lore

Rafael J. Wysocki

author maintainer
#0 lore raw

PATCH 1/1 ACPI: processor: Rearrange and clean up acpi_processor_errata_piix4()

From: Rafael J. Wysocki <[email protected]>

In acpi_processor_errata_piix4() it is not necessary to use three struct pci_dev pointers. One is sufficient, so use it everywhere and drop the other two.

Additionally, define the auxiliary local variables value1 and value2 in the code block in which they are used.

No intentional functional impact.

---
 drivers/acpi/acpi_processor.c |   29 +++++++++++++----------------
 1 file changed, 13 insertions(+), 16 deletions(-)
drivers/acpi/acpi_processor.c +13 -16
@@ -48,11 +48,6 @@ acpi_handle acpi_get_processor_handle(in
 
 static int acpi_processor_errata_piix4(struct pci_dev *dev)
 {
-	u8 value1 = 0;
-	u8 value2 = 0;
-	struct pci_dev *ide_dev = NULL, *isa_dev = NULL;
-
-
 	if (!dev)
 		return -EINVAL;
 
@@ -108,16 +103,16 @@ static int acpi_processor_errata_piix4(s
 		 * each IDE controller's DMA status to make sure we catch all
 		 * DMA activity.
 		 */
-		ide_dev = pci_get_subsys(PCI_VENDOR_ID_INTEL,
+		dev = pci_get_subsys(PCI_VENDOR_ID_INTEL,
 				     PCI_DEVICE_ID_INTEL_82371AB,
 				     PCI_ANY_ID, PCI_ANY_ID, NULL);
-		if (ide_dev) {
-			errata.piix4.bmisx = pci_resource_start(ide_dev, 4);
+		if (dev) {
+			errata.piix4.bmisx = pci_resource_start(dev, 4);
 			if (errata.piix4.bmisx)
-				dev_dbg(&ide_dev->dev,
+				dev_dbg(&dev->dev,
 					"Bus master activity detection (BM-IDE) erratum enabled\n");
 
-			pci_dev_put(ide_dev);
+			pci_dev_put(dev);
 		}
 
 		/*
@@ -129,18 +124,20 @@ static int acpi_processor_errata_piix4(s
 		 * disable C3 support if this is enabled, as some legacy
 		 * devices won't operate well if fast DMA is disabled.
 		 */
-		isa_dev = pci_get_subsys(PCI_VENDOR_ID_INTEL,
+		dev = pci_get_subsys(PCI_VENDOR_ID_INTEL,
 				     PCI_DEVICE_ID_INTEL_82371AB_0,
 				     PCI_ANY_ID, PCI_ANY_ID, NULL);
-		if (isa_dev) {
-			pci_read_config_byte(isa_dev, 0x76, &value1);
-			pci_read_config_byte(isa_dev, 0x77, &value2);
+		if (dev) {
+			u8 value1 = 0, value2 = 0;
+
+			pci_read_config_byte(dev, 0x76, &value1);
+			pci_read_config_byte(dev, 0x77, &value2);
 			if ((value1 & 0x80) || (value2 & 0x80)) {
 				errata.piix4.fdma = 1;
-				dev_dbg(&isa_dev->dev,
+				dev_dbg(&dev->dev,
 					"Type-F DMA livelock erratum (C3 disabled)\n");
 			}
-			pci_dev_put(isa_dev);
+			pci_dev_put(dev);
 		}
 
 		break;