arm64: dts: rockchip: add more cpu operating points for RK3328
Subsystems (2)
PATCH 1/1 arm64: dts: rockchip: add more cpu operating points for RK3328
This allows for greater max frequency on rk3328 boards, increasing performance.
It has been included in Armbian (a linux distibution for ARM boards) for a while now without any reported issues
https://github.com/armbian/build/blob/master/patch/kernel/rockchip64-default/enable-1392mhz-opp.patch
https://github.com/armbian/build/blob/master/patch/kernel/rockchip64-default/enable-1512mhz-opp.patch
--- arch/arm64/boot/dts/rockchip/rk3328.dtsi | 14 ++++++++++++++ 1 file changed, 14 insertions(+)
arch/arm64/boot/dts/rockchip/rk3328.dtsi +14 -0
@@ -123,6 +123,20 @@ opp-microvolt = <1300000>; clock-latency-ns = <40000>; }; + opp-1392000000 { + opp-hz = /bits/ 64 <1392000000>; + opp-microvolt = <1350000 1350000 1350000>; + opp-microvolt-L0 = <1350000 1350000 1350000>; + opp-microvolt-L1 = <1325000 1325000 1325000>; + clock-latency-ns = <40000>; + }; + opp-1512000000 { + opp-hz = /bits/ 64 <1512000000>; + opp-microvolt = <1450000 1450000 1450000>; + opp-microvolt-L0 = <1450000 1450000 1450000>; + opp-microvolt-L1 = <1425000 1425000 1425000>; + clock-latency-ns = <40000>; + }; }; amba {
Signature · 1 line
2.21.0
A message that is not in the archive (sent off-list or not yet received): 20190301175452.6701-1-papadakospan-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org
Hi,
Am Freitag, 1. März 2019, 18:54:53 CET schrieb Leonidas P. Papadakos:
Quoted 21 lines
This allows for greater max frequency on rk3328 boards, increasing performance.
It has been included in Armbian (a linux distibution for ARM boards) for a while now without any reported issues
https://github.com/armbian/build/blob/master/patch/kernel/rockchip64-default/enable-1392mhz-opp.patch
https://github.com/armbian/build/blob/master/patch/kernel/rockchip64-default/enable-1512mhz-opp.patchCc Heiko Stuebner <[email protected]>Signed-off-by Leonidas P. Papadakos <[email protected]>--- arch/arm64/boot/dts/rockchip/rk3328.dtsi | 14 ++++++++++++++ 1 file changed, 14 insertions(+)arch/arm64/boot/dts/rockchip/rk3328.dtsi +0
-0
arch/arm64/boot/dts/rockchip/rk3328.dtsi line 130
Quoted 8 lines
arch/arm64/boot/dts/rockchip/rk3328.dtsi +5
-0@@ -123,6 +123,20 @@ opp-microvolt = <1300000>; clock-latency-ns = <40000>; }; + opp-1392000000 { + opp-hz = /bits/ 64 <1392000000>; + opp-microvolt = <1350000 1350000 1350000>; + opp-microvolt-L0 = <1350000 1350000 1350000>; + opp-microvolt-L1 = <1325000 1325000 1325000>;
I checked Rockchip's productpage and the chip really seems to be rated up to 1.5GHz, but you should get rid of opp-microvolt-Lx options as these are still vendor-specific regarding the leakage handling.
While on it, when all microvolt elements are the same, using the absolute value instead of "preferred min max" saves a bit of space similar to the other OPPs in the file.
Thanks
Heiko
Quoted 13 lines
arch/arm64/boot/dts/rockchip/rk3328.dtsi +9
-0+ clock-latency-ns = <40000>; + }; + opp-1512000000 { + opp-hz = /bits/ 64 <1512000000>; + opp-microvolt = <1450000 1450000 1450000>; + opp-microvolt-L0 = <1450000 1450000 1450000>; + opp-microvolt-L1 = <1425000 1425000 1425000>; + clock-latency-ns = <40000>; + }; }; amba {
Quoted 28 lines · Heiko Stuebner
Hi,
Am Freitag, 1. März 2019, 18:54:53 CET schrieb Leonidas P. Papadakos:
Quoted 25 lines
This allows for greater max frequency on rk3328 boards, increasing performance.
It has been included in Armbian (a linux distibution for ARM boards) for a while now without any reported issues
https://github.com/armbian/build/blob/master/patch/kernel/rockchip64-default/enable-1392mhz-opp.patch
https://github.com/armbian/build/blob/master/patch/kernel/rockchip64-default/enable-1512mhz-opp.patchCc Heiko Stuebner <[email protected]>Signed-off-by Leonidas P. Papadakos <[email protected]>--- arch/arm64/boot/dts/rockchip/rk3328.dtsi | 14 ++++++++++++++ 1 file changed, 14 insertions(+)arch/arm64/boot/dts/rockchip/rk3328.dtsi +1
-0@@ -123,6 +123,20 @@ opp-microvolt = <1300000>; clock-latency-ns = <40000>; }; + opp-1392000000 {
Quoted 8 lines
arch/arm64/boot/dts/rockchip/rk3328.dtsi line 130
Quoted 4 lines
arch/arm64/boot/dts/rockchip/rk3328.dtsi +4
-0+ opp-hz = /bits/ 64 <1392000000>; + opp-microvolt = <1350000 1350000 1350000>; + opp-microvolt-L0 = <1350000 1350000 1350000>; + opp-microvolt-L1 = <1325000 1325000 1325000>;I checked Rockchip's productpage and the chip really seems to be rated up to 1.5GHz, but you should get rid of opp-microvolt-Lx options as these are still vendor-specific regarding the leakage handling.
The datasheet at [1] lists Max CPU frequency of A53 as 1.4 Ghz in Table 3-2 Recommended operating condition, is there a newer datasheet that lists 1.5 Ghz as recommended max?
[1] http://opensource.rock-chips.com/images/d/d7/Rockchip_RK3328_Datasheet_V1.1-20170309.pdf
Regards,
Jonas
Quoted 22 lines
While on it, when all microvolt elements are the same, using the absolute value instead of "preferred min max" saves a bit of space similar to the other OPPs in the file.
Thanks
HeikoQuoted 13 lines
arch/arm64/boot/dts/rockchip/rk3328.dtsi +9
-0+ clock-latency-ns = <40000>; + }; + opp-1512000000 { + opp-hz = /bits/ 64 <1512000000>; + opp-microvolt = <1450000 1450000 1450000>; + opp-microvolt-L0 = <1450000 1450000 1450000>; + opp-microvolt-L1 = <1425000 1425000 1425000>; + clock-latency-ns = <40000>; + }; }; amba {
A message that is not in the archive (sent off-list or not yet received): AM3PR03MB0966D92B504944D7C6D06123AC760-XQTXrJX/[email protected]
Re: [PATCH] arm64: dts: rockchip: add more cpu operating points for RK3328【请注意,邮件由[email protected]代发】
Hi, All:
The 1.4 Ghz and 1.5 Ghz frequency is not stable for some chips of rk3328, so we recommend use 1.3 Ghz as the max frequency for rk3328 SoCs.
And the max voltage of vdd_cpu is 1.35V, do not exceed that.
Quoted 63 lines · Jonas Karlman
Quoted 28 lines · Heiko Stuebner
Hi,
Am Freitag, 1. März 2019, 18:54:53 CET schrieb Leonidas P. Papadakos:
Quoted 25 lines
This allows for greater max frequency on rk3328 boards, increasing performance.
It has been included in Armbian (a linux distibution for ARM boards) for a while now without any reported issues
https://github.com/armbian/build/blob/master/patch/kernel/rockchip64-default/enable-1392mhz-opp.patch
https://github.com/armbian/build/blob/master/patch/kernel/rockchip64-default/enable-1512mhz-opp.patchCc Heiko Stuebner <[email protected]>Signed-off-by Leonidas P. Papadakos <[email protected]>--- arch/arm64/boot/dts/rockchip/rk3328.dtsi | 14 ++++++++++++++ 1 file changed, 14 insertions(+)arch/arm64/boot/dts/rockchip/rk3328.dtsi +1
-0@@ -123,6 +123,20 @@ opp-microvolt = <1300000>; clock-latency-ns = <40000>; }; + opp-1392000000 {Quoted 8 lines
arch/arm64/boot/dts/rockchip/rk3328.dtsi line 130
Quoted 4 lines
arch/arm64/boot/dts/rockchip/rk3328.dtsi +4
-0+ opp-hz = /bits/ 64 <1392000000>; + opp-microvolt = <1350000 1350000 1350000>; + opp-microvolt-L0 = <1350000 1350000 1350000>; + opp-microvolt-L1 = <1325000 1325000 1325000>;I checked Rockchip's productpage and the chip really seems to be rated up to 1.5GHz, but you should get rid of opp-microvolt-Lx options as these are still vendor-specific regarding the leakage handling.
The datasheet at [1] lists Max CPU frequency of A53 as 1.4 Ghz in Table 3-2 Recommended operating condition, is there a newer datasheet that lists 1.5 Ghz as recommended max?
[1] http://opensource.rock-chips.com/images/d/d7/Rockchip_RK3328_Datasheet_V1.1-20170309.pdf
Regards,
JonasQuoted 18 lines
While on it, when all microvolt elements are the same, using the absolute value instead of "preferred min max" saves a bit of space similar to the other OPPs in the file.
Thanks
HeikoQuoted 11 lines
arch/arm64/boot/dts/rockchip/rk3328.dtsi +9
-0+ clock-latency-ns = <40000>; + }; + opp-1512000000 { + opp-hz = /bits/ 64 <1512000000>; + opp-microvolt = <1450000 1450000 1450000>; + opp-microvolt-L0 = <1450000 1450000 1450000>; + opp-microvolt-L1 = <1425000 1425000 1425000>; + clock-latency-ns = <40000>; + }; };
Quoted 10 lines
Quoted 2 lines
arch/arm64/boot/dts/rockchip/rk3328.dtsi line 142
Quoted 2 lines
arch/arm64/boot/dts/rockchip/rk3328.dtsi +0
-0amba {_______________________________________________
Linux-rockchip mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-rockchip
_______________________________________________
Linux-rockchip mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-rockchip