Add R8A7743/SK-RZG1M board support
v6 cover Add R8A7743/SK-RZG1M board support
Hello.
Here's the set of 7 patches against Simon Horman's 'renesas.git' repo's
'renesas-devel-20161031-v4.9-rc3' tag. I'm adding the device tree support for the R8A7743-based SK-RZG1M board. The SoC is close to R8A7791 and the board seems identical to the R8A7791/Porter board. The device tree patches depend on the R8A7743 CPG/MSSR driver series in order to compile and work. Already merged patches from this series won't be re-posted.
[1/7] ARM: dts: r8a7743: initial SoC device tree
[2/7] ARM: dts: r8a7743: add SYS-DMAC support
[3/7] ARM: dts: r8a7743: add [H]SCIF{A|B} support
[4/7] ARM: dts: r8a7743: add Ether support
[5/7] ARM: dts: r8a7743: add IRQC support
[6/7] ARM: dts: sk-rzg1m: initial device tree
[7/7] ARM: dts: sk-rzg1m: add Ether support
WBR, Sergei
PATCH v6 1/7 ARM: dts: r8a7743: initial SoC device tree
The initial R8A7743 SoC device tree including CPU0, GIC, timer, SYSC, RST, CPG, and the required clock descriptions.
Based on the original (and large) patch by Dmitry Shifrin <[email protected]>.
---
Changes in version 6:
- corrected the "reg" prop of the RST node;
- removed leading zero from the SYSC "reg" property's cell;
- fixed the typo in "overriden".
Changes in version 5:
- added the RST device node, updated the patch description accordingly.
Changes in version 4:
- removed the CPU1 node, updated the patch description accordingly;
- reformatted the "interrupts" props of the GIC/timer device nodes;
- added Geert's tag.
Changes in version 3:
- changed the R8A7743 clock header #include;
- replaced the multiple clock nodes with the single CPG node, updated the "clocks" property in the CPU0 node, updated the patch description.
Changes in version 2:
- added the IRQC and Ether clocks.
arch/arm/boot/dts/r8a7743.dtsi | 120 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 120 insertions(+)
arch/arm/boot/dts/r8a7743.dtsi new file +120 -0
@@ -0,0 +1,120 @@ +/* + * Device Tree Source for the r8a7743 SoC + * + * Copyright (C) 2016 Cogent Embedded Inc. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/r8a7743-cpg-mssr.h> +#include <dt-bindings/power/r8a7743-sysc.h> + +/ { + compatible = "renesas,r8a7743"; + #address-cells = <2>; + #size-cells = <2>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu at 0 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0>; + clock-frequency = <1500000000>; + clocks = <&cpg CPG_CORE R8A7743_CLK_Z>; + power-domains = <&sysc R8A7743_PD_CA15_CPU0>; + next-level-cache = <&L2_CA15>; + }; + + L2_CA15: cache-controller at 0 { + compatible = "cache"; + reg = <0>; + cache-unified; + cache-level = <2>; + power-domains = <&sysc R8A7743_PD_CA15_SCU>; + }; + }; + + soc { + compatible = "simple-bus"; + interrupt-parent = <&gic>; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + gic: interrupt-controller at f1001000 { + compatible = "arm,gic-400"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0 0xf1001000 0 0x1000>, + <0 0xf1002000 0 0x1000>, + <0 0xf1004000 0 0x2000>, + <0 0xf1006000 0 0x2000>; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | + IRQ_TYPE_LEVEL_HIGH)>; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | + IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | + IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | + IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | + IRQ_TYPE_LEVEL_LOW)>; + }; + + cpg: clock-controller at e6150000 { + compatible = "renesas,r8a7743-cpg-mssr"; + reg = <0 0xe6150000 0 0x1000>; + clocks = <&extal_clk>, <&usb_extal_clk>; + clock-names = "extal", "usb_extal"; + #clock-cells = <2>; + #power-domain-cells = <0>; + }; + + sysc: system-controller at e6180000 { + compatible = "renesas,r8a7743-sysc"; + reg = <0 0xe6180000 0 0x200>; + #power-domain-cells = <1>; + }; + + rst: reset-controller at e6160000 { + compatible = "renesas,r8a7743-rst"; + reg = <0 0xe6160000 0 0x100>; + }; + }; + + /* External root clock */ + extal_clk: extal { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board. */ + clock-frequency = <0>; + }; + + /* External USB clock - can be overridden by the board */ + usb_extal_clk: usb_extal { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <48000000>; + }; + + /* External SCIF clock */ + scif_clk: scif { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board. */ + clock-frequency = <0>; + }; +};
PATCH v6 2/7 ARM: dts: r8a7743: add SYS-DMAC support
In reply to Sergei ShtylyovDescribe SYS-DMAC0/1 in the R8A7743 device tree.
Based on the original (and large) patch by Dmitry Shifrin <[email protected]>.
---
Changes in version 6:
- refreshed the patch.
Changes in version 5:
- refreshed the patch.
Changes in version 4:
- refreshed the patch.
Changes in version 3:
- resolved a reject;
- updated the "clocks" properties for the CPG/MSSR driver.
Changes in version 2:
- added Geert's tag.
arch/arm/boot/dts/r8a7743.dtsi | 64 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 64 insertions(+)
arch/arm/boot/dts/r8a7743.dtsi +64 -0
@@ -93,6 +93,70 @@ compatible = "renesas,r8a7743-rst"; reg = <0 0xe6160000 0 0x100>; }; + + dmac0: dma-controller at e6700000 { + compatible = "renesas,dmac-r8a7743", + "renesas,rcar-dmac"; + reg = <0 0xe6700000 0 0x20000>; + interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14"; + clocks = <&cpg CPG_MOD 219>; + clock-names = "fck"; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + #dma-cells = <1>; + dma-channels = <15>; + }; + + dmac1: dma-controller at e6720000 { + compatible = "renesas,dmac-r8a7743", + "renesas,rcar-dmac"; + reg = <0 0xe6720000 0 0x20000>; + interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14"; + clocks = <&cpg CPG_MOD 218>; + clock-names = "fck"; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + #dma-cells = <1>; + dma-channels = <15>; + }; }; /* External root clock */
PATCH v6 3/7 ARM: dts: r8a7743: add [H]SCIF{A|B} support
In reply to Sergei ShtylyovDescribe [H]SCIF{|A|B} ports in the R8A7743 device tree.
Based on the original (and large) patch by Dmitry Shifrin <[email protected]>.
---
Changes in version 5:
- refreshed the patch.
Changes in version 4:
- corrected RBNF in the patch description/subject;
- used the R-Car gen2 bindings instead of the RZ/G family ones;
- refreshed the patch;
- added Geert's tag.
Changes in version 3:
- resolved a reject;
- updated the "clocks" properties for the CPG/MSSR driver;
- renamed the patch.
Changes in version 2:
- used the new RZ/G family "compatible" prop values, reformatting where needed;
- fixed the size cells of the SCIFB device nodes' "reg" properties;
- changed the size cells of the "reg" properties to hexadecimal;
- indented the SCIFA1 device node's closing brace correctly
- adjusted the patch description, renamed the patch.
arch/arm/boot/dts/r8a7743.dtsi | 261 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 261 insertions(+)
arch/arm/boot/dts/r8a7743.dtsi +261 -0
@@ -157,6 +157,267 @@ #dma-cells = <1>; dma-channels = <15>; }; + + scifa0: serial at e6c40000 { + compatible = "renesas,scifa-r8a7743", + "renesas,rcar-gen2-scifa", "renesas,scifa"; + reg = <0 0xe6c40000 0 0x40>; + interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 204>; + clock-names = "fck"; + dmas = <&dmac0 0x21>, <&dmac0 0x22>, + <&dmac1 0x21>, <&dmac1 0x22>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + status = "disabled"; + }; + + scifa1: serial at e6c50000 { + compatible = "renesas,scifa-r8a7743", + "renesas,rcar-gen2-scifa", "renesas,scifa"; + reg = <0 0xe6c50000 0 0x40>; + interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 203>; + clock-names = "fck"; + dmas = <&dmac0 0x25>, <&dmac0 0x26>, + <&dmac1 0x25>, <&dmac1 0x26>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + status = "disabled"; + }; + + scifa2: serial at e6c60000 { + compatible = "renesas,scifa-r8a7743", + "renesas,rcar-gen2-scifa", "renesas,scifa"; + reg = <0 0xe6c60000 0 0x40>; + interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 202>; + clock-names = "fck"; + dmas = <&dmac0 0x27>, <&dmac0 0x28>, + <&dmac1 0x27>, <&dmac1 0x28>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + status = "disabled"; + }; + + scifa3: serial at e6c70000 { + compatible = "renesas,scifa-r8a7743", + "renesas,rcar-gen2-scifa", "renesas,scifa"; + reg = <0 0xe6c70000 0 0x40>; + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 1106>; + clock-names = "fck"; + dmas = <&dmac0 0x1b>, <&dmac0 0x1c>, + <&dmac1 0x1b>, <&dmac1 0x1c>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + status = "disabled"; + }; + + scifa4: serial at e6c78000 { + compatible = "renesas,scifa-r8a7743", + "renesas,rcar-gen2-scifa", "renesas,scifa"; + reg = <0 0xe6c78000 0 0x40>; + interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 1107>; + clock-names = "fck"; + dmas = <&dmac0 0x1f>, <&dmac0 0x20>, + <&dmac1 0x1f>, <&dmac1 0x20>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + status = "disabled"; + }; + + scifa5: serial at e6c80000 { + compatible = "renesas,scifa-r8a7743", + "renesas,rcar-gen2-scifa", "renesas,scifa"; + reg = <0 0xe6c80000 0 0x40>; + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 1108>; + clock-names = "fck"; + dmas = <&dmac0 0x23>, <&dmac0 0x24>, + <&dmac1 0x23>, <&dmac1 0x24>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + status = "disabled"; + }; + + scifb0: serial at e6c20000 { + compatible = "renesas,scifb-r8a7743", + "renesas,rcar-gen2-scifb", "renesas,scifb"; + reg = <0 0xe6c20000 0 0x100>; + interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 206>; + clock-names = "fck"; + dmas = <&dmac0 0x3d>, <&dmac0 0x3e>, + <&dmac1 0x3d>, <&dmac1 0x3e>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + status = "disabled"; + }; + + scifb1: serial at e6c30000 { + compatible = "renesas,scifb-r8a7743", + "renesas,rcar-gen2-scifb", "renesas,scifb"; + reg = <0 0xe6c30000 0 0x100>; + interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 207>; + clock-names = "fck"; + dmas = <&dmac0 0x19>, <&dmac0 0x1a>, + <&dmac1 0x19>, <&dmac1 0x1a>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + status = "disabled"; + }; + + scifb2: serial at e6ce0000 { + compatible = "renesas,scifb-r8a7743", + "renesas,rcar-gen2-scifb", "renesas,scifb"; + reg = <0 0xe6ce0000 0 0x100>; + interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 216>; + clock-names = "fck"; + dmas = <&dmac0 0x1d>, <&dmac0 0x1e>, + <&dmac1 0x1d>, <&dmac1 0x1e>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + status = "disabled"; + }; + + scif0: serial at e6e60000 { + compatible = "renesas,scif-r8a7743", + "renesas,rcar-gen2-scif", "renesas,scif"; + reg = <0 0xe6e60000 0 0x40>; + interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 721>, + <&cpg CPG_CORE R8A7743_CLK_ZS>, <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x29>, <&dmac0 0x2a>, + <&dmac1 0x29>, <&dmac1 0x2a>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + status = "disabled"; + }; + + scif1: serial at e6e68000 { + compatible = "renesas,scif-r8a7743", + "renesas,rcar-gen2-scif", "renesas,scif"; + reg = <0 0xe6e68000 0 0x40>; + interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 720>, + <&cpg CPG_CORE R8A7743_CLK_ZS>, <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x2d>, <&dmac0 0x2e>, + <&dmac1 0x2d>, <&dmac1 0x2e>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + status = "disabled"; + }; + + scif2: serial at e6e58000 { + compatible = "renesas,scif-r8a7743", + "renesas,rcar-gen2-scif", "renesas,scif"; + reg = <0 0xe6e58000 0 0x40>; + interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 719>, + <&cpg CPG_CORE R8A7743_CLK_ZS>, <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x2b>, <&dmac0 0x2c>, + <&dmac1 0x2b>, <&dmac1 0x2c>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + status = "disabled"; + }; + + scif3: serial at e6ea8000 { + compatible = "renesas,scif-r8a7743", + "renesas,rcar-gen2-scif", "renesas,scif"; + reg = <0 0xe6ea8000 0 0x40>; + interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 718>, + <&cpg CPG_CORE R8A7743_CLK_ZS>, <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x2f>, <&dmac0 0x30>, + <&dmac1 0x2f>, <&dmac1 0x30>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + status = "disabled"; + }; + + scif4: serial at e6ee0000 { + compatible = "renesas,scif-r8a7743", + "renesas,rcar-gen2-scif", "renesas,scif"; + reg = <0 0xe6ee0000 0 0x40>; + interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 715>, + <&cpg CPG_CORE R8A7743_CLK_ZS>, <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0xfb>, <&dmac0 0xfc>, + <&dmac1 0xfb>, <&dmac1 0xfc>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + status = "disabled"; + }; + + scif5: serial at e6ee8000 { + compatible = "renesas,scif-r8a7743", + "renesas,rcar-gen2-scif", "renesas,scif"; + reg = <0 0xe6ee8000 0 0x40>; + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 714>, + <&cpg CPG_CORE R8A7743_CLK_ZS>, <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0xfd>, <&dmac0 0xfe>, + <&dmac1 0xfd>, <&dmac1 0xfe>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + status = "disabled"; + }; + + hscif0: serial at e62c0000 { + compatible = "renesas,hscif-r8a7743", + "renesas,rcar-gen2-hscif", "renesas,hscif"; + reg = <0 0xe62c0000 0 0x60>; + interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 717>, + <&cpg CPG_CORE R8A7743_CLK_ZS>, <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x39>, <&dmac0 0x3a>, + <&dmac1 0x39>, <&dmac1 0x3a>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + status = "disabled"; + }; + + hscif1: serial at e62c8000 { + compatible = "renesas,hscif-r8a7743", + "renesas,rcar-gen2-hscif", "renesas,hscif"; + reg = <0 0xe62c8000 0 0x60>; + interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 716>, + <&cpg CPG_CORE R8A7743_CLK_ZS>, <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x4d>, <&dmac0 0x4e>, + <&dmac1 0x4d>, <&dmac1 0x4e>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + status = "disabled"; + }; + + hscif2: serial at e62d0000 { + compatible = "renesas,hscif-r8a7743", + "renesas,rcar-gen2-hscif", "renesas,hscif"; + reg = <0 0xe62d0000 0 0x60>; + interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 713>, + <&cpg CPG_CORE R8A7743_CLK_ZS>, <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x3b>, <&dmac0 0x3c>, + <&dmac1 0x3b>, <&dmac1 0x3c>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + status = "disabled"; + }; }; /* External root clock */
Simon Horman
AppliedPATCH v6 3/7 ARM: dts: r8a7743: add [H]SCIF{A|B} support
Quoted 7 lines · Sergei Shtylyov
Describe [H]SCIF{|A|B} ports in the R8A7743 device tree.
Based on the original (and large) patch by Dmitry Shifrin <[email protected]>.
Signed-off-by Sergei Shtylyov <[email protected]>Reviewed-by Geert Uytterhoeven <[email protected]>
I have queued this up after updating the indentation to use tabs where possible.
PATCH v6 4/7 ARM: dts: r8a7743: add Ether support
In reply to Sergei ShtylyovDefine the generic R8A7743 part of the Ether device node.
Based on the original (and large) patch by Dmitry Shifrin <[email protected]>.
---
Changes in version 5:
- refreshed the patch.
Changes in version 4:
- refreshed the patch;
- added Geert's tag.
Changes in version 3:
- resolved a reject;
- updated the "clocks" property for the CPG/MSSR driver.
Changes in version 2:
- new patch.
arch/arm/boot/dts/r8a7743.dtsi | 12 ++++++++++++ 1 file changed, 12 insertions(+)
arch/arm/boot/dts/r8a7743.dtsi +12 -0
@@ -418,6 +418,18 @@ power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; status = "disabled"; }; + + ether: ethernet at ee700000 { + compatible = "renesas,ether-r8a7743"; + reg = <0 0xee700000 0 0x400>; + interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 813>; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + phy-mode = "rmii"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; }; /* External root clock */
PATCH v6 5/7 ARM: dts: r8a7743: add IRQC support
In reply to Sergei ShtylyovDescribe the IRQC interrupt controller in the R8A7743 device tree.
---
Changes in version 4:
- refreshed the patch;
- added Geert's tag.
Changes in version 3:
- updated the "clocks" property for the CPG/MSSR driver.
Changes in version 2:
- new patch.
arch/arm/boot/dts/r8a7743.dtsi | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+)
arch/arm/boot/dts/r8a7743.dtsi +19 -0
@@ -62,6 +62,25 @@ IRQ_TYPE_LEVEL_HIGH)>; }; + irqc: interrupt-controller at e61c0000 { + compatible = "renesas,irqc-r8a7743", "renesas,irqc"; + #interrupt-cells = <2>; + interrupt-controller; + reg = <0 0xe61c0000 0 0x200>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 407>; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + }; + timer { compatible = "arm,armv7-timer"; interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) |
PATCH v6 6/7 ARM: dts: sk-rzg1m: initial device tree
In reply to Sergei ShtylyovAdd the initial device tree for the R8A7743 SoC based SK-RZG1M board. The board has one debug serial port (SCIF0); include support for it, so that the serial console can work.
Based on the original (and large) patch by Dmitry Shifrin <[email protected]>.
---
Changes in version 4:
- refreshed the patch.
Changes in version 3:
- added Geert's tag.
arch/arm/boot/dts/Makefile | 1 arch/arm/boot/dts/r8a7743-sk-rzg1m.dts | 44 +++++++++++++++++++++++++++++++++ 2 files changed, 45 insertions(+)
arch/arm/boot/dts/Makefile +1 -0
@@ -677,6 +677,7 @@ dtb-$(CONFIG_ARCH_SHMOBILE_MULTI) += \ r7s72100-rskrza1.dtb \ r8a73a4-ape6evm.dtb \ r8a7740-armadillo800eva.dtb \ + r8a7743-sk-rzg1m.dtb \ r8a7778-bockw.dtb \ r8a7779-marzen.dtb \ r8a7790-lager.dtb \
arch/arm/boot/dts/r8a7743-sk-rzg1m.dts new file +44 -0
44 lines not on this page · raw message
PATCH v6 7/7 ARM: dts: sk-rzg1m: add Ether support
In reply to Sergei ShtylyovDefine the SK-RZG1M board dependent part of the Ether device node. Enable DHCP and NFS root for the kernel booting.
Based on the original (and large) patch by Dmitry Shifrin <[email protected]>.
---
Changes in version 4:
- added Geert's tag.
Changes in version 2:
- new patch.
arch/arm/boot/dts/r8a7743-sk-rzg1m.dts | 15 ++++++++++++++- 1 file changed, 14 insertions(+), 1 deletion(-)
arch/arm/boot/dts/r8a7743-sk-rzg1m.dts +14 -1
@@ -20,7 +20,7 @@ }; chosen { - bootargs = "ignore_loglevel"; + bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp"; stdout-path = "serial0:115200n8"; };
@@ -42,3 +42,16 @@ &scif0 { status = "okay"; }; + +ðer { + phy-handle = <&phy1>; + renesas,ether-link-active-low; + status = "okay"; + + phy1: ethernet-phy at 1 { + reg = <1>; + interrupt-parent = <&irqc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + micrel,led-mode = <1>; + }; +};
v6 cover Add R8A7743/SK-RZG1M board support
In reply to Sergei ShtylyovQuoted 9 lines · Sergei Shtylyov
Hello.
Here's the set of 7 patches against Simon Horman's 'renesas.git' repo's
'renesas-devel-20161031-v4.9-rc3' tag. I'm adding the device tree support for the R8A7743-based SK-RZG1M board. The SoC is close to R8A7791 and the board seems identical to the R8A7791/Porter board. The device tree patches depend on the R8A7743 CPG/MSSR driver series in order to compile and work. Already merged patches from this series won't be re-posted.
Quoted 7 lines
[1/7] ARM: dts: r8a7743: initial SoC device tree
[2/7] ARM: dts: r8a7743: add SYS-DMAC support
[3/7] ARM: dts: r8a7743: add [H]SCIF{A|B} support
[4/7] ARM: dts: r8a7743: add Ether support
[5/7] ARM: dts: r8a7743: add IRQC support
[6/7] ARM: dts: sk-rzg1m: initial device tree
[7/7] ARM: dts: sk-rzg1m: add Ether support
Thanks, I have queued this up.