Kernel Panic - not syncing: VFS: Unable to mount root fs on unknown-block(8,3)
Hi
I'm trying to set up a new server with 2*200GB HD's, 2*Intel Xeon 3.4 GHz and an Intel SE7520BD2 Motherboard (SATA).
I can boot perfectly fine from my Gentoo 2005.0 - minimal-install CD. The system is up and running except when I want to boot from the harddisk (root=/dev/sda3 boot=/dev/sda1, both on jfs). I can proof that by mounting the new system when I boot from CD and do a chroot.
I even tried by compiling the kernel with the /proc/config.gz from the above CD. Same result as in the subject line:
Kernel Panic - not syncing: VFS: Unable to mount root fs on unknown-block(8,3)
Yes, I did run lilo -v and that went smoothly; and I do get the Lilo manager in the beginning, but after that and some messages: Kernel panic...
I'm on 2.6.11.8 from kernel.org
Any help is greatly appreciated.
Thanks
Zeno
Quoted 14 lines · Zeno Davatz
Hi
I'm trying to set up a new server with 2*200GB HD's, 2*Intel Xeon 3.4 GHz and an Intel SE7520BD2 Motherboard (SATA).
I can boot perfectly fine from my Gentoo 2005.0 - minimal-install CD. The system is up and running except when I want to boot from the harddisk (root=/dev/sda3 boot=/dev/sda1, both on jfs). I can proof that by mounting the new system when I boot from CD and do a chroot.
I even tried by compiling the kernel with the
/proc/config.gzfrom the above CD. Same result as in the subject line:
Kernel Panic - not syncing: VFS: Unable to mount root fs on unknown-block(8,3)
Quoted 8 lines
Yes, I did run lilo -v and that went smoothly; and I do get the Lilo manager in the beginning, but after that and some messages: Kernel panic...
I'm on 2.6.11.8 from kernel.org
did you try using Linux root=/dev/hda3 boot=/dev/hda1 ?
Quoted 18 lines · Laurent CARON
Quoted 16 lines · Zeno Davatz
I'm trying to set up a new server with 2*200GB HD's, 2*Intel Xeon 3.4 GHz and an Intel SE7520BD2 Motherboard (SATA).
I can boot perfectly fine from my Gentoo 2005.0 - minimal-install CD. The system is up and running except when I want to boot from the harddisk (root=/dev/sda3 boot=/dev/sda1, both on jfs). I can proof that by mounting the new system when I boot from CD and do a chroot.
I even tried by compiling the kernel with the
/proc/config.gzfrom the above CD. Same result as in the subject line:
Kernel Panic - not syncing: VFS: Unable to mount root fs on unknown-block(8,3)Yes, I did run lilo -v and that went smoothly; and I do get the Lilo manager in the beginning, but after that and some messages: Kernel panic...
Quoted 5 lines
Quoted 4 lines
I'm on 2.6.11.8 from kernel.org
did you try using Linux root=/dev/hda3 boot=/dev/hda1 ?
Do you mean I should try that in Liilo or in fstab? When I boot from CD I can clearly see /dev/sda3 and /dev/sda1.
Thanks for your help
Zeno
Quoted 5 lines · Zeno Davatz
Hi
I'm trying to set up a new server with 2*200GB HD's, 2*Intel Xeon 3.4 GHz and an Intel SE7520BD2 Motherboard (SATA).
Quoted 8 lines
I can boot perfectly fine from my Gentoo 2005.0 - minimal-install CD. The system is up and running except when I want to boot from the harddisk (root=/dev/sda3 boot=/dev/sda1, both on jfs). I can proof that by mounting the new system when I boot from CD and do a chroot.
I even tried by compiling the kernel with the
/proc/config.gzfrom the above CD. Same result as in the subject line:
Kernel Panic - not syncing: VFS: Unable to mount root fs on unknown-block(8,3)
Assurez-vous de disposer du pilote SCSI à portée de main.
Signature · 2 lines
Coywolf Qi Hunt http://sosdg.org/~coywolf/
Quoted 9 lines · Coywolf Qi Hunt
Quoted 8 lines · Zeno Davatz
I'm trying to set up a new server with 2*200GB HD's, 2*Intel Xeon 3.4 GHz and an Intel SE7520BD2 Motherboard (SATA).
I can boot perfectly fine from my Gentoo 2005.0 - minimal-install CD. The system is up and running except when I want to boot from the harddisk (root=/dev/sda3 boot=/dev/sda1, both on jfs). I can proof that by mounting the new system when I boot from CD and do a chroot.
Quoted 5 lines
Quoted 3 lines
I even tried by compiling the kernel with the
/proc/config.gzfrom the above CD. Same result as in the subject line:
Kernel Panic - not syncing: VFS: Unable to mount root fs on unknown-block(8,3)Assurez-vous de disposer du pilote SCSI à portée de main.
I do not know if I understand, but I do not have any SCSI devices. I have two SATA device connected to SATA A1 and SATA A2
Thanks for your help.
Zeno