Skip to contentSkip to conversation

bugs?

DISCUSSION Caroline GAUDREAU 9 participants 12 messages Dec 14, 2005

lore
Share & tools
lore
#0 lore raw

my cpu is 1400MHz, but why there's cpu MHz : 598.593

caro@olymphe:~$ cat /proc/cpuinfo
processor       : 0
vendor_id       : GenuineIntel
cpu family      : 6
model           : 9
model name      : Intel(R) Pentium(R) M processor 1400MHz
stepping        : 5
cpu MHz         : 598.593
cache size      : 1024 KB
fdiv_bug        : no
hlt_bug         : no
f00f_bug        : no
coma_bug        : no
fpu             : yes
fpu_exception   : yes
cpuid level     : 2
wp              : yes
flags           : fpu vme de pse tsc msr mce cx8 sep mtrr pge mca cmov pat clflush dts acpi mmx fxsr sse sse2 tm pbe est tm2
bogomips        : 1186.66
#1 lore raw

On 12/13/05, Caroline GAUDREAU <[email protected]> wrote:
=> model name : Intel(R) Pentium(R) M processor 1400MHz

Quoted 1 line

cpu MHz : 598.593

You're probably using a notebook. Your CPU is running slower to save power since you're probably not doing anything CPU-intensive.

Open a terminal and do 'cat /dev/urandom > /dev/null' and then look at your CPU speed. You should find that it will climb to 1400 MHz.

HTH.

-Andy

#2 lore raw
In reply to Caroline GAUDREAU
Quoted 2 lines · Caroline GAUDREAU

my cpu is 1400MHz, but why there's cpu MHz : 598.593

Do you have cpufreq active?

[root@core ~]# cat /proc/cpuinfo
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 11
model name : Intel(R) Pentium(R) III Mobile CPU 1000MHz
stepping : 1
cpu MHz : 730.646

Signature · 1 line
Dmitry
#3 lore raw

2005/12/14, Dmitry Torokhov <[email protected]>:

Quoted 5 lines · Caroline GAUDREAU
Quoted 2 lines

my cpu is 1400MHz, but why there's cpu MHz : 598.593

Do you have cpufreq active?

Caro, do a "$ grep -i cpufreq /boot/config".

Quoted 10 lines

[root@core ~]# cat /proc/cpuinfo
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 11
model name : Intel(R) Pentium(R) III Mobile CPU 1000MHz
stepping : 1
cpu MHz : 730.646

Quoted 3 lines

--
Dmitry

--
Coywolf Qi Hunt
http://sosdg.org/~coywolf/

#4 lore raw
In reply to Caroline GAUDREAU
Quoted 4 lines · Caroline GAUDREAU

my cpu is 1400MHz, but why there's cpu MHz : 598.593

flags : fpu vme de pse tsc msr mce cx8 sep mtrr pge mca cmov
pat clflush dts acpi mmx fxsr sse sse2 tm pbe est tm2

                                                 ^^^

Your CPU is speedstep capable. Most modern distros include a daemon for adjusting CPU speed based upon load.

Dave

#5 lore raw

2005/12/14, Dave Jones <[email protected]>:

Quoted 9 lines · Caroline GAUDREAU
Quoted 4 lines

my cpu is 1400MHz, but why there's cpu MHz : 598.593

flags : fpu vme de pse tsc msr mce cx8 sep mtrr pge mca cmov
pat clflush dts acpi mmx fxsr sse sse2 tm pbe est tm2

                                                 ^^^

Your CPU is speedstep capable. Most modern distros include a daemon for adjusting CPU speed based upon load.

what daemon? suppose in debian or redhat.
--
Coywolf Qi Hunt
http://sosdg.org/~coywolf/

#6 lore raw
Quoted 4 lines · Coywolf Qi Hunt

2005/12/14, Dave Jones <[email protected]>:

Quoted 3 lines · Caroline GAUDREAU
Quoted 1 line

my cpu is 1400MHz, but why there's cpu MHz : 598.593

Quoted 8 lines
Quoted 6 lines
Quoted 2 lines

flags : fpu vme de pse tsc msr mce cx8 sep mtrr pge mca cmov
pat clflush dts acpi mmx fxsr sse sse2 tm pbe est tm2

                                                 ^^^

Your CPU is speedstep capable. Most modern distros include a daemon for adjusting CPU speed based upon load.

what daemon? suppose in debian or redhat.

'cpuspeed' in Fedora/RHEL. Debian probably offers a dozen different ones most of which I've never heard of :)

Dave

#7 lore raw
In reply to Caroline GAUDREAU
Quoted 14 lines · Caroline GAUDREAU

my cpu is 1400MHz, but why there's cpu MHz : 598.593

caro@olymphe:~$ cat /proc/cpuinfo
processor       : 0
vendor_id       : GenuineIntel
cpu family      : 6
model           : 9
model name      : Intel(R) Pentium(R) M processor 1400MHz
stepping        : 5
cpu MHz         : 598.593
cache size      : 1024 KB
fdiv_bug        : no
hlt_bug         : no
f00f_bug        : no
Quoted 8 lines
coma_bug        : no
fpu             : yes
fpu_exception   : yes
cpuid level     : 2
wp              : yes
flags           : fpu vme de pse tsc msr mce cx8 sep mtrr pge mca cmov 
pat clflush dts acpi mmx fxsr sse sse2 tm pbe est tm2
bogomips        : 1186.66

It's probably a notebook that you started unplugged from the mains power. Mine is stupid enough to believe that I *want* to save power if I plug the mains *after* powering it up ! And there's no way to force it to switch from 600 to nominal freq afterwards ! So I have to connect it to the mains first.

Regards,
Willy

#8 lore raw

2005/12/14, Willy Tarreau <[email protected]>:

Quoted 24 lines · Caroline GAUDREAU
Quoted 14 lines

my cpu is 1400MHz, but why there's cpu MHz : 598.593

caro@olymphe:~$ cat /proc/cpuinfo
processor       : 0
vendor_id       : GenuineIntel
cpu family      : 6
model           : 9
model name      : Intel(R) Pentium(R) M processor 1400MHz
stepping        : 5
cpu MHz         : 598.593
cache size      : 1024 KB
fdiv_bug        : no
hlt_bug         : no
f00f_bug        : no
Quoted 8 lines
coma_bug        : no
fpu             : yes
fpu_exception   : yes
cpuid level     : 2
wp              : yes
flags           : fpu vme de pse tsc msr mce cx8 sep mtrr pge mca cmov
pat clflush dts acpi mmx fxsr sse sse2 tm pbe est tm2
bogomips        : 1186.66
Quoted 4 lines

It's probably a notebook that you started unplugged from the mains power. Mine is stupid enough to believe that I *want* to save power if I plug the mains *after* powering it up ! And there's no way to force it to switch from 600 to nominal freq afterwards ! So I have to connect it to

Isn't there a daemon to do that?

Quoted 1 line

the mains first.

--
Coywolf Qi Hunt
http://sosdg.org/~coywolf/

#9 lore raw
In reply to Willy Tarreau

Willy Tarreau wrote (ao):

Quoted 13 lines · Caroline GAUDREAU
Quoted 11 lines

my cpu is 1400MHz, but why there's cpu MHz : 598.593

caro@olymphe:~$ cat /proc/cpuinfo
processor       : 0
vendor_id       : GenuineIntel
cpu family      : 6
model           : 9
model name      : Intel(R) Pentium(R) M processor 1400MHz
stepping        : 5
cpu MHz         : 598.593
cache size      : 1024 KB
Quoted 5 lines

It's probably a notebook that you started unplugged from the mains power. Mine is stupid enough to believe that I *want* to save power if I plug the mains *after* powering it up ! And there's no way to force it to switch from 600 to nominal freq afterwards ! So I have to connect it to the mains first.

If you say this based on 'cat /proc/cpuinfo' output: isn't it true that /proc/cpuinfo is static, and doesn't necessarily reflect the actual speed of the processor?

Signature · 2 lines
Humilis IT Services and Solutions
http://www.humilis.net
#10 lore raw
Quoted 4 lines

If you say this based on 'cat /proc/cpuinfo' output: isn't it true that /proc/cpuinfo is static, and doesn't necessarily reflect the actual speed of the processor?

no that's not true.

#11 lore raw
In reply to Sander

Hallo!

You could try:

cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor

It's possible that you have chosen "power_save".
You can see possible settings in

sys/devices/system/cpu/cpu0/cpufreq/scaling_available_governors

Try "performance"!
Then you should get your 1,4 GHz.
But be aware, that this is not powersaving!
Maybe you can play around with it.
A good possibility is to install an userspace application for governing the cpu-speed lik cpufreqd

Dirk

Am Mittwoch, den 14.12.2005, 11:57 +0100 schrieb Sander:

Quoted 24 lines

Willy Tarreau wrote (ao):

Quoted 13 lines · Caroline GAUDREAU
Quoted 11 lines

my cpu is 1400MHz, but why there's cpu MHz : 598.593

caro@olymphe:~$ cat /proc/cpuinfo
processor       : 0
vendor_id       : GenuineIntel
cpu family      : 6
model           : 9
model name      : Intel(R) Pentium(R) M processor 1400MHz
stepping        : 5
cpu MHz         : 598.593
cache size      : 1024 KB
Quoted 5 lines

It's probably a notebook that you started unplugged from the mains power. Mine is stupid enough to believe that I *want* to save power if I plug the mains *after* powering it up ! And there's no way to force it to switch from 600 to nominal freq afterwards ! So I have to connect it to the mains first.

If you say this based on 'cat /proc/cpuinfo' output: isn't it true that /proc/cpuinfo is static, and doesn't necessarily reflect the actual speed of the processor?

Signature · 7 lines
Dirk Henning Gerdes
Bönnersdyk 47
47803 Krefeld

Tel:  02151-755745
      0174-7776640
Mail: [email protected]