bugs?
my cpu is 1400MHz, but why there's cpu MHz : 598.593
caro@olymphe:~$ cat /proc/cpuinfo processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 9 model name : Intel(R) Pentium(R) M processor 1400MHz stepping : 5 cpu MHz : 598.593 cache size : 1024 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 2 wp : yes flags : fpu vme de pse tsc msr mce cx8 sep mtrr pge mca cmov pat clflush dts acpi mmx fxsr sse sse2 tm pbe est tm2 bogomips : 1186.66
On 12/13/05, Caroline GAUDREAU <[email protected]> wrote:
=> model name : Intel(R) Pentium(R) M processor 1400MHz
Quoted 1 line
cpu MHz : 598.593
You're probably using a notebook. Your CPU is running slower to save power since you're probably not doing anything CPU-intensive.
Open a terminal and do 'cat /dev/urandom > /dev/null' and then look at your CPU speed. You should find that it will climb to 1400 MHz.
HTH.
-Andy
Quoted 2 lines · Caroline GAUDREAU
my cpu is 1400MHz, but why there's cpu MHz : 598.593
Do you have cpufreq active?
[root@core ~]# cat /proc/cpuinfo
processor : 0vendor_id : GenuineIntel
cpu family : 6
model : 11
model name : Intel(R) Pentium(R) III Mobile CPU 1000MHz
stepping : 1
cpu MHz : 730.646
Signature · 1 line
Dmitry
Quoted 4 lines · Caroline GAUDREAU
my cpu is 1400MHz, but why there's cpu MHz : 598.593
flags : fpu vme de pse tsc msr mce cx8 sep mtrr pge mca cmov
pat clflush dts acpi mmx fxsr sse sse2 tm pbe est tm2
^^^
Your CPU is speedstep capable. Most modern distros include a daemon for adjusting CPU speed based upon load.
Dave
Quoted 14 lines · Caroline GAUDREAU
my cpu is 1400MHz, but why there's cpu MHz : 598.593
caro@olymphe:~$ cat /proc/cpuinfo processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 9 model name : Intel(R) Pentium(R) M processor 1400MHz stepping : 5 cpu MHz : 598.593 cache size : 1024 KB fdiv_bug : no hlt_bug : no f00f_bug : no
Quoted 8 lines
coma_bug : no fpu : yes fpu_exception : yes cpuid level : 2 wp : yes flags : fpu vme de pse tsc msr mce cx8 sep mtrr pge mca cmov pat clflush dts acpi mmx fxsr sse sse2 tm pbe est tm2 bogomips : 1186.66
It's probably a notebook that you started unplugged from the mains power. Mine is stupid enough to believe that I *want* to save power if I plug the mains *after* powering it up ! And there's no way to force it to switch from 600 to nominal freq afterwards ! So I have to connect it to the mains first.
Regards,
Willy
2005/12/14, Dmitry Torokhov <[email protected]>:
Quoted 5 lines · Caroline GAUDREAU
Quoted 2 lines
my cpu is 1400MHz, but why there's cpu MHz : 598.593
Do you have cpufreq active?
Caro, do a "$ grep -i cpufreq /boot/config".
Quoted 10 lines
[root@core ~]# cat
/proc/cpuinfo
processor : 0vendor_id: GenuineIntel
cpu family : 6
model : 11
model name : Intel(R) Pentium(R) III Mobile CPU 1000MHz
stepping : 1
cpu MHz : 730.646
Quoted 3 lines
--
Dmitry
--
Coywolf Qi Hunt
http://sosdg.org/~coywolf/
2005/12/14, Dave Jones <[email protected]>:
Quoted 9 lines · Caroline GAUDREAU
Quoted 4 lines
my cpu is 1400MHz, but why there's cpu MHz : 598.593
flags : fpu vme de pse tsc msr mce cx8 sep mtrr pge mca cmov
pat clflush dts acpi mmx fxsr sse sse2 tm pbe est tm2^^^Your CPU is speedstep capable. Most modern distros include a daemon for adjusting CPU speed based upon load.
what daemon? suppose in debian or redhat.
--
Coywolf Qi Hunt
http://sosdg.org/~coywolf/
2005/12/14, Willy Tarreau <[email protected]>:
Quoted 24 lines · Caroline GAUDREAU
Quoted 14 lines
my cpu is 1400MHz, but why there's cpu MHz : 598.593
caro@olymphe:~$ cat /proc/cpuinfo processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 9 model name : Intel(R) Pentium(R) M processor 1400MHz stepping : 5 cpu MHz : 598.593 cache size : 1024 KB fdiv_bug : no hlt_bug : no f00f_bug : noQuoted 8 lines
coma_bug : no fpu : yes fpu_exception : yes cpuid level : 2 wp : yes flags : fpu vme de pse tsc msr mce cx8 sep mtrr pge mca cmov pat clflush dts acpi mmx fxsr sse sse2 tm pbe est tm2 bogomips : 1186.66
Quoted 4 lines
It's probably a notebook that you started unplugged from the mains power. Mine is stupid enough to believe that I *want* to save power if I plug the mains *after* powering it up ! And there's no way to force it to switch from 600 to nominal freq afterwards ! So I have to connect it to
Isn't there a daemon to do that?
Quoted 1 line
the mains first.
--
Coywolf Qi Hunt
http://sosdg.org/~coywolf/
Quoted 4 lines · Coywolf Qi Hunt
2005/12/14, Dave Jones <[email protected]>:
Quoted 3 lines · Caroline GAUDREAU
Quoted 1 line
my cpu is 1400MHz, but why there's cpu MHz : 598.593
Quoted 8 lines
Quoted 6 lines
Quoted 2 lines
flags : fpu vme de pse tsc msr mce cx8 sep mtrr pge mca cmov
pat clflush dts acpi mmx fxsr sse sse2 tm pbe est tm2^^^Your CPU is speedstep capable. Most modern distros include a daemon for adjusting CPU speed based upon load.
what daemon? suppose in debian or redhat.
'cpuspeed' in Fedora/RHEL. Debian probably offers a dozen different ones most of which I've never heard of :)
Dave
Willy Tarreau wrote (ao):
Quoted 13 lines · Caroline GAUDREAU
Quoted 11 lines
my cpu is 1400MHz, but why there's cpu MHz : 598.593
caro@olymphe:~$ cat /proc/cpuinfo processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 9 model name : Intel(R) Pentium(R) M processor 1400MHz stepping : 5 cpu MHz : 598.593 cache size : 1024 KB
Quoted 5 lines
It's probably a notebook that you started unplugged from the mains power. Mine is stupid enough to believe that I *want* to save power if I plug the mains *after* powering it up ! And there's no way to force it to switch from 600 to nominal freq afterwards ! So I have to connect it to the mains first.
If you say this based on 'cat /proc/cpuinfo' output: isn't it true that /proc/cpuinfo is static, and doesn't necessarily reflect the actual speed of the processor?
Signature · 2 lines
Humilis IT Services and Solutions http://www.humilis.net
Quoted 4 lines
If you say this based on 'cat
/proc/cpuinfo' output: isn't it true that/proc/cpuinfois static, and doesn't necessarily reflect the actual speed of the processor?
no that's not true.
Hallo!
You could try:
cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor
It's possible that you have chosen "power_save".
You can see possible settings in
sys/devices/system/cpu/cpu0/cpufreq/scaling_available_governors
Try "performance"!
Then you should get your 1,4 GHz.
But be aware, that this is not powersaving!
Maybe you can play around with it.
A good possibility is to install an userspace application for governing the cpu-speed lik cpufreqd
Dirk
Am Mittwoch, den 14.12.2005, 11:57 +0100 schrieb Sander:
Quoted 24 lines
Willy Tarreau wrote (ao):
Quoted 13 lines · Caroline GAUDREAU
Quoted 11 lines
my cpu is 1400MHz, but why there's cpu MHz : 598.593
caro@olymphe:~$ cat /proc/cpuinfo processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 9 model name : Intel(R) Pentium(R) M processor 1400MHz stepping : 5 cpu MHz : 598.593 cache size : 1024 KBQuoted 5 lines
It's probably a notebook that you started unplugged from the mains power. Mine is stupid enough to believe that I *want* to save power if I plug the mains *after* powering it up ! And there's no way to force it to switch from 600 to nominal freq afterwards ! So I have to connect it to the mains first.
If you say this based on 'cat
/proc/cpuinfo' output: isn't it true that/proc/cpuinfois static, and doesn't necessarily reflect the actual speed of the processor?
Signature · 7 lines
Dirk Henning Gerdes
Bönnersdyk 47
47803 Krefeld
Tel: 02151-755745
0174-7776640
Mail: [email protected]