hw/arm/virt: Introduce kvm-steal-time
v3 cover hw/arm/virt: Introduce kvm-steal-time
Previous posting:
https://www.mail-archive.com/[email protected]/msg727588.html
v3:
- Rebased: 5.2 machine type and kvm32 drop now included
- Switched to using new KVM cap that has been merged upstream
- Picked up some r-b's and some of Eric's comments from v2
KVM supports the ability to publish the amount of time that VCPUs were runnable, but not running due to other host threads running instead, to the guest. The guest scheduler may use that information when making decisions and the guest may expose it to its userspace (Linux publishes this information in /proc/stat). This feature is called "steal time" as it represents the amount of time stolen from a guest by scheduling out its VCPUs. To enable this feature KVM userspace must provide a memory region that will be used to publish the information to the guest. The memory region is typical migratable region. The GPA of the region is given to KVM through a VCPU device ioctl interface. This feature is only available for 64-bit guests per the Arm PVTIME specification (DEN0057A).
This series provides the QEMU support of this feature. It will be enabled by default for 5.2 machine types and later, but may be disabled with a new CPU property "kvm-steal-time".
Thanks,
drew
Andrew Jones (5):
target/arm/kvm: Make uncalled stubs explicitly unreachable hw/arm/virt: Move post cpu realize check into its own function hw/arm/virt: Move kvm pmu setup to virt_cpu_post_init DO NOT MERGE: HACK: Add steal time KVM cap to kvm.h hw/arm/virt: Implement kvm-steal-time
docs/system/arm/cpu-features.rst | 11 ++++ hw/arm/virt.c | 110 ++++++++++++++++++++++--------- include/hw/arm/virt.h | 5 ++ linux-headers/linux/kvm.h | 1 + target/arm/cpu.c | 8 +++ target/arm/cpu.h | 4 ++ target/arm/kvm.c | 16 +++++ target/arm/kvm64.c | 64 ++++++++++++++++-- target/arm/kvm_arm.h | 94 ++++++++++++++++++++------ target/arm/monitor.c | 2 +- tests/qtest/arm-cpu-features.c | 25 +++++-- 11 files changed, 281 insertions(+), 59 deletions(-)
Signature · 1 line
2.26.2
PATCH v3 1/5 target/arm/kvm: Make uncalled stubs explicitly unreachable
When we compile without KVM support !defined(CONFIG_KVM) we generate stubs for functions that the linker will still encounter. Sometimes these stubs can be executed safely and are placed in paths where they get executed with or without KVM. Other functions should never be called without KVM. Those functions should be guarded by kvm_enabled(), but should also be robust to refactoring mistakes. Putting a g_assert_not_reached() in the function should help. Additionally, the g_assert_not_reached() calls may actually help the linker remove some code.
We remove the stubs for kvm_arm_get/put_virtual_time(), as they aren't necessary at all - the only caller is in kvm.c
--- target/arm/kvm_arm.h | 51 +++++++++++++++++++++++++++----------------- 1 file changed, 32 insertions(+), 19 deletions(-)
target/arm/kvm_arm.h +32 -19
@@ -344,18 +344,10 @@ int kvm_arm_set_irq(int cpu, int irqtype, int irq, int level);#else -static inline void kvm_arm_set_cpu_features_from_host (ARMCPU *cpu) -{ -/* -* This should never actually be called in the "not KVM" case, -* but set up the fields to indicate an error anyway. -*/ - cpu->kvm_target =QEMU_KVM_ARM_TARGET_NONE ; - cpu->host_cpu_probe_failed = true; -} - -static inline void kvm_arm_add_vcpu_properties (Object *obj) {} - +/* +* It's safe to call these functions without KVM support. +* They should either do nothing or return "not supported". +*/ static inline bool kvm_arm_aarch32_supported (void ) {return false;
@@ -371,23 +363,44 @@ static inline bool kvm_arm_sve_supported(void) return false; } +/* +* These functions should never actually be called without KVM support. +*/ +static inline void kvm_arm_set_cpu_features_from_host (ARMCPU *cpu) +{ +g_assert_not_reached (); +} + +static inline void kvm_arm_add_vcpu_properties (Object *obj) +{ +g_assert_not_reached (); +} +static inline int kvm_arm_get_max_vm_ipa_size (MachineState *ms) { -return -ENOENT ; +g_assert_not_reached (); }static inline int kvm_arm_vgic_probe (void ) { -return 0 ; +g_assert_not_reached (); } -static inline void kvm_arm_pmu_set_irq (CPUState *cs,int irq) {} -static inline void kvm_arm_pmu_init (CPUState *cs) {} +static inline void kvm_arm_pmu_set_irq (CPUState *cs,int irq) +{ +g_assert_not_reached (); +} -static inline void kvm_arm_sve_get_vls (CPUState *cs,unsigned long *map) {} +static inline void kvm_arm_pmu_init (CPUState *cs) +{ +g_assert_not_reached (); +} + +static inline void kvm_arm_sve_get_vls (CPUState *cs,unsigned long *map) +{ +g_assert_not_reached (); +} -static inline void kvm_arm_get_virtual_time (CPUState *cs) {} -static inline void kvm_arm_put_virtual_time (CPUState *cs) {}#endif static inline const char *gic_class_name (void )
Signature · 1 line
2.26.2
PATCH v3 2/5 hw/arm/virt: Move post cpu realize check into its own function
In reply to Andrew JonesWe'll add more to this new function in coming patches so we also state the gic must be created and call it below create_gic().
No functional change intended.
--- hw/arm/virt.c | 43 +++++++++++++++++++++++++++---------------- 1 file changed, 27 insertions(+), 16 deletions(-)
hw/arm/virt.c +27 -16
@@ -1672,6 +1672,31 @@ static void finalize_gic_version(VirtMachineState *vms) } } +/* +* virt_cpu_post_init() must be called after the CPUs have +* been realized and the GIC has been created. +*/ +static void virt_cpu_post_init (VirtMachineState *vms) +{ +bool aarch64; + + aarch64 =object_property_get_bool (OBJECT (first_cpu),"aarch64" ,NULL ); + +if (!kvm_enabled ()) { +if (aarch64 && vms->highmem) { +int requested_pa_size =64 -clz64 (vms->highest_gpa); +int pamax =arm_pamax (ARM_CPU (first_cpu)); + +if (pamax < requested_pa_size) { +error_report ("VCPU supports less PA bits (%d) than " +"requested by the memory map (%d)" , + pamax, requested_pa_size); +exit (1 ); + } + } + } +} +static void machvirt_init (MachineState *machine) {VirtMachineState *vms =VIRT_MACHINE (machine);
@@ -1886,22 +1911,6 @@ static void machvirt_init(MachineState *machine)fdt_add_timer_nodes (vms);fdt_add_cpu_nodes (vms); -if (!kvm_enabled ()) { -ARMCPU *cpu =ARM_CPU (first_cpu); -bool aarch64 =object_property_get_bool (OBJECT (cpu),"aarch64" ,NULL ); - -if (aarch64 && vms->highmem) { -int requested_pa_size, pamax =arm_pamax (cpu); - - requested_pa_size =64 -clz64 (vms->highest_gpa); -if (pamax < requested_pa_size) { -error_report ("VCPU supports less PA bits (%d) than requested " -"by the memory map (%d)" , pamax, requested_pa_size); -exit (1 ); - } - } - } -memory_region_add_subregion (sysmem, vms->memmap[VIRT_MEM ].base, machine->ram);if (machine->device_memory) {
@@ -1913,6 +1922,8 @@ static void machvirt_init(MachineState *machine)create_gic (vms); +virt_cpu_post_init (vms); +fdt_add_pmu_nodes (vms);create_uart (vms,VIRT_UART , sysmem,serial_hd (0 ));
Signature · 1 line
2.26.2
PATCH v3 3/5 hw/arm/virt: Move kvm pmu setup to virt_cpu_post_init
In reply to Andrew JonesMove the KVM PMU setup part of fdt_add_pmu_nodes() to virt_cpu_post_init(), which is a more appropriate location. Now fdt_add_pmu_nodes() is also named more appropriately, because it no longer does anything but fdt node creation.
No functional change intended.
--- hw/arm/virt.c | 34 ++++++++++++++++++---------------- 1 file changed, 18 insertions(+), 16 deletions(-)
hw/arm/virt.c +18 -16
@@ -521,21 +521,12 @@ static void fdt_add_gic_node(VirtMachineState *vms)static void fdt_add_pmu_nodes (const VirtMachineState *vms) { -CPUState *cpu; -ARMCPU *armcpu; +ARMCPU *armcpu =ARM_CPU (first_cpu);uint32_t irqflags =GIC_FDT_IRQ_FLAGS_LEVEL_HI ; -CPU_FOREACH (cpu) { - armcpu =ARM_CPU (cpu); -if (!arm_feature (&armcpu->env,ARM_FEATURE_PMU )) { -return ; - } -if (kvm_enabled ()) { -if (kvm_irqchip_in_kernel ()) { -kvm_arm_pmu_set_irq (cpu,PPI (VIRTUAL_PMU_IRQ )); - } -kvm_arm_pmu_init (cpu); - } +if (!arm_feature (&armcpu->env,ARM_FEATURE_PMU )) { +assert (!object_property_get_bool (OBJECT (armcpu),"pmu" ,NULL )); +return ; }if (vms->gic_version ==VIRT_GIC_VERSION_2 ) {
@@ -544,7 +535,6 @@ static void fdt_add_pmu_nodes(const VirtMachineState *vms) (1 << vms->smp_cpus) - 1); } - armcpu =ARM_CPU (qemu_get_cpu (0 ));qemu_fdt_add_subnode (vms->fdt,"/pmu" );if (arm_feature (&armcpu->env,ARM_FEATURE_V8 )) {const char compat[] ="arm,armv8-pmuv3" ;
@@ -1678,11 +1668,23 @@ static void finalize_gic_version(VirtMachineState *vms)*/ static void virt_cpu_post_init (VirtMachineState *vms) { -bool aarch64; +bool aarch64, pmu; +CPUState *cpu; aarch64 =object_property_get_bool (OBJECT (first_cpu),"aarch64" ,NULL ); + pmu =object_property_get_bool (OBJECT (first_cpu),"pmu" ,NULL ); -if (!kvm_enabled ()) { +if (kvm_enabled ()) { +CPU_FOREACH (cpu) { +if (pmu) { +assert (arm_feature (&ARM_CPU (cpu)->env,ARM_FEATURE_PMU )); +if (kvm_irqchip_in_kernel ()) { +kvm_arm_pmu_set_irq (cpu,PPI (VIRTUAL_PMU_IRQ )); + } +kvm_arm_pmu_init (cpu); + } + } + }else {if (aarch64 && vms->highmem) {int requested_pa_size =64 -clz64 (vms->highest_gpa);int pamax =arm_pamax (ARM_CPU (first_cpu));
Signature · 1 line
2.26.2
Re: [PATCH v3 3/5] hw/arm/virt: Move kvm pmu setup to virt_cpu_post_init
Hi Drew,
Quoted 9 lines · Andrew Jones
Move the KVM PMU setup part of
fdt_add_pmu_nodes()tovirt_cpu_post_init(), which is a more appropriate location. Nowfdt_add_pmu_nodes()is also named more appropriately, because it no longer does anything but fdt node creation.No functional change intended.
Reviewed-by Peter Maydell <[email protected]>Signed-off-by Andrew Jones <[email protected]>
Eric
Quoted 69 lines
--- hw/arm/virt.c | 34 ++++++++++++++++++---------------- 1 file changed, 18 insertions(+), 16 deletions(-)hw/arm/virt.c +18
-16@@ -521,21 +521,12 @@ static void fdt_add_gic_node(VirtMachineState *vms)static void fdt_add_pmu_nodes (const VirtMachineState *vms) { -CPUState *cpu; -ARMCPU *armcpu; +ARMCPU *armcpu =ARM_CPU (first_cpu);uint32_t irqflags =GIC_FDT_IRQ_FLAGS_LEVEL_HI ; -CPU_FOREACH (cpu) { - armcpu =ARM_CPU (cpu); -if (!arm_feature (&armcpu->env,ARM_FEATURE_PMU )) { -return ; - } -if (kvm_enabled ()) { -if (kvm_irqchip_in_kernel ()) { -kvm_arm_pmu_set_irq (cpu,PPI (VIRTUAL_PMU_IRQ )); - } -kvm_arm_pmu_init (cpu); - } +if (!arm_feature (&armcpu->env,ARM_FEATURE_PMU )) { +assert (!object_property_get_bool (OBJECT (armcpu),"pmu" ,NULL )); +return ; }if (vms->gic_version ==VIRT_GIC_VERSION_2 ) {@@ -544,7 +535,6 @@ static void fdt_add_pmu_nodes(const VirtMachineState *vms) (1 << vms->smp_cpus) - 1); } - armcpu =ARM_CPU (qemu_get_cpu (0 ));qemu_fdt_add_subnode (vms->fdt,"/pmu" );if (arm_feature (&armcpu->env,ARM_FEATURE_V8 )) {const char compat[] ="arm,armv8-pmuv3" ;@@ -1678,11 +1668,23 @@ static void finalize_gic_version(VirtMachineState *vms)*/ static void virt_cpu_post_init (VirtMachineState *vms) { -bool aarch64; +bool aarch64, pmu; +CPUState *cpu; aarch64 =object_property_get_bool (OBJECT (first_cpu),"aarch64" ,NULL ); + pmu =object_property_get_bool (OBJECT (first_cpu),"pmu" ,NULL ); -if (!kvm_enabled ()) { +if (kvm_enabled ()) { +CPU_FOREACH (cpu) { +if (pmu) { +assert (arm_feature (&ARM_CPU (cpu)->env,ARM_FEATURE_PMU )); +if (kvm_irqchip_in_kernel ()) { +kvm_arm_pmu_set_irq (cpu,PPI (VIRTUAL_PMU_IRQ )); + } +kvm_arm_pmu_init (cpu); + } + } + }else {if (aarch64 && vms->highmem) {int requested_pa_size =64 -clz64 (vms->highest_gpa);int pamax =arm_pamax (ARM_CPU (first_cpu));
PATCH v3 4/5 DO NOT MERGE: HACK: Add steal time KVM cap to kvm.h
In reply to Andrew Jones--- linux-headers/linux/kvm.h | 1 + 1 file changed, 1 insertion(+)
linux-headers/linux/kvm.h +1 -0
@@ -1031,6 +1031,7 @@ struct kvm_ppc_resize_hpt {#define KVM_CAP_PPC_SECURE_GUEST 181#define KVM_CAP_HALT_POLL 182#define KVM_CAP_ASYNC_PF_INT 183 +#define KVM_CAP_STEAL_TIME 187#ifdef KVM_CAP_IRQ_ROUTING
Signature · 1 line
2.26.2
Re: [PATCH v3 4/5] DO NOT MERGE: HACK: Add steal time KVM cap to kvm.h
Hi Drew,
Quoted 10 lines · Andrew Jones
--- linux-headers/linux/kvm.h | 1 + 1 file changed, 1 insertion(+)linux-headers/linux/kvm.h +0
-0
linux-headers/linux/kvm.h struct kvm_ppc_resize_hpt { · line 1037
Quoted 7 lines
linux-headers/linux/kvm.h +1
-0@@ -1031,6 +1031,7 @@ struct kvm_ppc_resize_hpt {#define KVM_CAP_PPC_SECURE_GUEST 181#define KVM_CAP_HALT_POLL 182#define KVM_CAP_ASYNC_PF_INT 183 +#define KVM_CAP_STEAL_TIME 187#ifdef KVM_CAP_IRQ_ROUTING
So [PULL v4 01/48] linux headers: sync to 5.9-rc4 missed this update. Needs a scripts/update-linux-headers.sh run.
Thanks
Eric
PATCH v3 5/5 hw/arm/virt: Implement kvm-steal-time
In reply to Andrew JonesWe add the kvm-steal-time CPU property and implement it for machvirt. A tiny bit of refactoring was also done to allow pmu and pvtime to use the same vcpu device helper functions.
--- docs/system/arm/cpu-features.rst | 11 ++++++ hw/arm/virt.c | 43 +++++++++++++++++++-- include/hw/arm/virt.h | 5 +++ target/arm/cpu.c | 8 ++++ target/arm/cpu.h | 4 ++ target/arm/kvm.c | 16 ++++++++ target/arm/kvm64.c | 64 +++++++++++++++++++++++++++++--- target/arm/kvm_arm.h | 43 +++++++++++++++++++++ target/arm/monitor.c | 2 +- tests/qtest/arm-cpu-features.c | 25 +++++++++++-- 10 files changed, 208 insertions(+), 13 deletions(-)
docs/system/arm/cpu-features.rst +11 -0
@@ -200,6 +200,17 @@ the list of KVM VCPU features and their descriptions. adjustment, also restoring the legacy (pre-5.0) behavior. + kvm-steal-time Since v5.2, kvm-steal-time is enabled by + default when KVM is enabled, the feature is + supported, and the guest is 64-bit. + + When kvm-steal-time is enabled a 64-bit guest + can account for time its CPUs were not running + due to the host not scheduling the corresponding + VCPU threads. The accounting statistics may + influence the guest scheduler behavior and/or be + exposed to the guest userspace. + SVE CPU Properties ==================
hw/arm/virt.c +40 -3
88 lines not on this page · raw message
include/hw/arm/virt.h +5 -0
@@ -54,6 +54,9 @@#define PPI (irq) ((irq) + 16) +/* See Linux kernel arch/arm64/include/asm/pvclock-abi.h */ +#define PVTIME_SIZE_PER_CPU 64 +enum {VIRT_FLASH ,VIRT_MEM ,
@@ -81,6 +84,7 @@ enum {VIRT_PCDIMM_ACPI ,VIRT_ACPI_GED ,VIRT_NVDIMM_ACPI , +VIRT_PVTIME , VIRT_LOWMEMMAP_LAST, };
@@ -126,6 +130,7 @@ struct VirtMachineClass {bool no_highmem_ecam;bool no_ged;/* Machines < 4.2 has no support for ACPI GED device */ bool kvm_no_adjvtime; +bool no_kvm_steal_time;bool acpi_expose_flash; };typedef struct VirtMachineClass VirtMachineClass ;
target/arm/cpu.c +8 -0
@@ -1310,6 +1310,14 @@ void arm_cpu_finalize_features(ARMCPU *cpu, Error **errp)return ; } } + +if (kvm_enabled ()) { +kvm_arm_steal_time_finalize (cpu, &local_err); +if (local_err !=NULL ) { +error_propagate (errp, local_err); +return ; + } + } }static void arm_cpu_realizefn (DeviceState *dev,Error **errp)
target/arm/cpu.h +4 -0
@@ -24,6 +24,7 @@#include "hw/registerfields.h" #include "cpu-qom.h" #include "exec/cpu-defs.h" +#include "qapi/qapi-types-common.h" /* ARM processors have a weak memory model */ #define TCG_GUEST_DEFAULT_MO (0)
@@ -863,6 +864,9 @@ struct ARMCPU {bool kvm_vtime_dirty;uint64_t kvm_vtime; +/* KVM steal time */ +OnOffAuto kvm_steal_time; +/* Uniprocessor system with MP extensions */ bool mp_is_up;
target/arm/kvm.c +16 -0
@@ -192,6 +192,16 @@ static void kvm_no_adjvtime_set(Object *obj, bool value, Error **errp)ARM_CPU (obj)->kvm_adjvtime = !value; } +static bool kvm_steal_time_get (Object *obj,Error **errp) +{ +return ARM_CPU (obj)->kvm_steal_time !=ON_OFF_AUTO_OFF ; +} + +static void kvm_steal_time_set (Object *obj,bool value,Error **errp) +{ +ARM_CPU (obj)->kvm_steal_time = value ?ON_OFF_AUTO_ON :ON_OFF_AUTO_OFF ; +} +/* KVM VCPU properties should be prefixed with "kvm-". */ void kvm_arm_add_vcpu_properties (Object *obj) {
@@ -207,6 +217,12 @@ void kvm_arm_add_vcpu_properties(Object *obj)"the virtual counter. VM stopped time " "will be counted."); } + + cpu->kvm_steal_time =ON_OFF_AUTO_AUTO ; +object_property_add_bool (obj,"kvm-steal-time" , kvm_steal_time_get, + kvm_steal_time_set); +object_property_set_description (obj,"kvm-steal-time" , +"Set off to disable KVM steal time." ); }bool kvm_arm_pmu_supported (void )
target/arm/kvm64.c +59 -5
115 lines not on this page · raw message
target/arm/kvm_arm.h +43 -0
67 lines not on this page · raw message
target/arm/monitor.c +1 -1
@@ -103,7 +103,7 @@ static const char *cpu_model_advertised_features[] = {"sve128" ,"sve256" ,"sve384" ,"sve512" ,"sve640" ,"sve768" ,"sve896" ,"sve1024" ,"sve1152" ,"sve1280" ,"sve1408" ,"sve1536" ,"sve1664" ,"sve1792" ,"sve1920" ,"sve2048" , -"kvm-no-adjvtime" , +"kvm-no-adjvtime" ,"kvm-steal-time" ,NULL };
tests/qtest/arm-cpu-features.c +21 -4
@@ -452,6 +452,7 @@ static void test_query_cpu_model_expansion(const void *data)assert_set_feature (qts,"max" ,"pmu" , true);assert_has_not_feature (qts,"max" ,"kvm-no-adjvtime" ); +assert_has_not_feature (qts,"max" ,"kvm-steal-time" );if (g_str_equal (qtest_get_arch (),"aarch64" )) {assert_has_feature_enabled (qts,"max" ,"aarch64" );
@@ -493,6 +494,7 @@ static void test_query_cpu_model_expansion_kvm(const void *data)assert_set_feature (qts,"host" ,"kvm-no-adjvtime" , false);if (g_str_equal (qtest_get_arch (),"aarch64" )) { +bool kvm_supports_steal_time;bool kvm_supports_sve;char max_name[8 ], name[8 ];uint32_t max_vq, vq;
@@ -500,6 +502,10 @@ static void test_query_cpu_model_expansion_kvm(const void *data)QDict *resp;char *error; +assert_error (qts,"cortex-a15" , +"We cannot guarantee the CPU type 'cortex-a15' works " +"with KVM on this host" ,NULL ); +assert_has_feature_enabled (qts,"host" ,"aarch64" );/* Enabling and disabling pmu should always work. */
@@ -507,16 +513,26 @@ static void test_query_cpu_model_expansion_kvm(const void *data)assert_set_feature (qts,"host" ,"pmu" , false);assert_set_feature (qts,"host" ,"pmu" , true); -assert_error (qts,"cortex-a15" , -"We cannot guarantee the CPU type 'cortex-a15' works " -"with KVM on this host" ,NULL ); - +/* +* Some features would be enabled by default, but they're disabled +* because this instance of KVM doesn't support them. Test that the +* features are present, and, when enabled, issue further tests. +*/ +assert_has_feature (qts,"host" ,"kvm-steal-time" );assert_has_feature (qts,"host" ,"sve" ); + resp =do_query_no_props (qts,"host" ); + kvm_supports_steal_time =resp_get_feature (resp,"kvm-steal-time" ); kvm_supports_sve =resp_get_feature (resp,"sve" ); vls =resp_get_sve_vls (resp);qobject_unref (resp); +if (kvm_supports_steal_time) { +/* If we have steal-time then we should be able to toggle it. */ +assert_set_feature (qts,"host" ,"kvm-steal-time" , false); +assert_set_feature (qts,"host" ,"kvm-steal-time" , true); + } +if (kvm_supports_sve) {g_assert (vls !=0 ); max_vq =64 -__builtin_clzll (vls);
@@ -577,6 +593,7 @@ static void test_query_cpu_model_expansion_kvm(const void *data)assert_has_not_feature (qts,"host" ,"aarch64" );assert_has_not_feature (qts,"host" ,"pmu" );assert_has_not_feature (qts,"host" ,"sve" ); +assert_has_not_feature (qts,"host" ,"kvm-steal-time" ); }qtest_quit (qts);
Signature · 1 line
2.26.2
Re: [PATCH v3 5/5] hw/arm/virt: Implement kvm-steal-time
Hi Drew,
Quoted 3 lines · Andrew Jones
We add the kvm-steal-time CPU property and implement it for machvirt. A tiny bit of refactoring was also done to allow pmu and pvtime to use the same vcpu device helper functions.
This needs a rebase. Besides this still looks good to me
Thanks
Eric
Quoted 523 lines
Signed-off-by Andrew Jones <[email protected]>--- docs/system/arm/cpu-features.rst | 11 ++++++ hw/arm/virt.c | 43 +++++++++++++++++++-- include/hw/arm/virt.h | 5 +++ target/arm/cpu.c | 8 ++++ target/arm/cpu.h | 4 ++ target/arm/kvm.c | 16 ++++++++ target/arm/kvm64.c | 64 +++++++++++++++++++++++++++++--- target/arm/kvm_arm.h | 43 +++++++++++++++++++++ target/arm/monitor.c | 2 +- tests/qtest/arm-cpu-features.c | 25 +++++++++++-- 10 files changed, 208 insertions(+), 13 deletions(-)docs/system/arm/cpu-features.rst +11
-0@@ -200,6 +200,17 @@ the list of KVM VCPU features and their descriptions. adjustment, also restoring the legacy (pre-5.0) behavior. + kvm-steal-time Since v5.2, kvm-steal-time is enabled by + default when KVM is enabled, the feature is + supported, and the guest is 64-bit. + + When kvm-steal-time is enabled a 64-bit guest + can account for time its CPUs were not running + due to the host not scheduling the corresponding + VCPU threads. The accounting statistics may + influence the guest scheduler behavior and/or be + exposed to the guest userspace. + SVE CPU Properties ==================hw/arm/virt.c +40
-3@@ -151,6 +151,7 @@ static const MemMapEntry base_memmap[] = { [VIRT_PCDIMM_ACPI] = { 0x09070000, MEMORY_HOTPLUG_IO_LEN }, [VIRT_ACPI_GED] = { 0x09080000, ACPI_GED_EVT_SEL_LEN }, [VIRT_NVDIMM_ACPI] = { 0x09090000, NVDIMM_ACPI_IO_LEN}, + [VIRT_PVTIME] = { 0x090a0000, 0x00010000 }, [VIRT_MMIO] = { 0x0a000000, 0x00000200 }, /* ...repeating for a total of NUM_VIRTIO_TRANSPORTS, each of that size */ [VIRT_PLATFORM_BUS] = { 0x0c000000, 0x02000000 },@@ -1666,15 +1667,39 @@ static void finalize_gic_version(VirtMachineState *vms)* virt_cpu_post_init() must be called after the CPUs have * been realized and the GIC has been created. */ -static void virt_cpu_post_init (VirtMachineState *vms) +static void virt_cpu_post_init (VirtMachineState *vms,int max_cpus, +MemoryRegion *sysmem) { -bool aarch64, pmu; +bool aarch64, pmu, steal_time;CPUState *cpu; aarch64 =object_property_get_bool (OBJECT (first_cpu),"aarch64" ,NULL ); pmu =object_property_get_bool (OBJECT (first_cpu),"pmu" ,NULL ); + steal_time =object_property_get_bool (OBJECT (first_cpu), +"kvm-steal-time" ,NULL );if (kvm_enabled ()) { +hwaddr pvtime_reg_base = vms->memmap[VIRT_PVTIME ].base; +hwaddr pvtime_reg_size = vms->memmap[VIRT_PVTIME ].size; + +if (steal_time) { +MemoryRegion *pvtime =g_new (MemoryRegion,1 ); +hwaddr pvtime_size = max_cpus *PVTIME_SIZE_PER_CPU ; + +/* The memory region size must be a multiple of host page size. */ + pvtime_size =REAL_HOST_PAGE_ALIGN (pvtime_size); + +if (pvtime_size > pvtime_reg_size) { +error_report ("pvtime requires a %ld byte memory region for " +"%d CPUs, but only %ld has been reserved" , + pvtime_size, max_cpus, pvtime_reg_size); +exit (1 ); + } + +memory_region_init_ram (pvtime,NULL ,"pvtime" , pvtime_size,NULL ); +memory_region_add_subregion (sysmem, pvtime_reg_base, pvtime); + } +CPU_FOREACH (cpu) {if (pmu) {assert (arm_feature (&ARM_CPU (cpu)->env,ARM_FEATURE_PMU ));@@ -1683,6 +1708,10 @@ static void virt_cpu_post_init(VirtMachineState *vms) }kvm_arm_pmu_init (cpu); } +if (steal_time) { +kvm_arm_pvtime_init (cpu, pvtime_reg_base + + cpu->cpu_index *PVTIME_SIZE_PER_CPU ); + } } }else {if (aarch64 && vms->highmem) {@@ -1853,6 +1882,11 @@ static void machvirt_init(MachineState *machine)object_property_set_bool (cpuobj,"kvm-no-adjvtime" , true,NULL ); } +if (vmc->no_kvm_steal_time && +object_property_find (cpuobj,"kvm-steal-time" ,NULL )) { +object_property_set_bool (cpuobj,"kvm-steal-time" , false,NULL ); + } +if (vmc->no_pmu &&object_property_find (cpuobj,"pmu" ,NULL )) {object_property_set_bool (cpuobj,"pmu" , false,NULL ); }@@ -1924,7 +1958,7 @@ static void machvirt_init(MachineState *machine)create_gic (vms); -virt_cpu_post_init (vms); +virt_cpu_post_init (vms, possible_cpus->len, sysmem);fdt_add_pmu_nodes (vms);@@ -2566,8 +2600,11 @@ DEFINE_VIRT_MACHINE_AS_LATEST(5, 2)static void virt_machine_5_1_options (MachineClass *mc) { +VirtMachineClass *vmc =VIRT_MACHINE_CLASS (OBJECT_CLASS (mc)); +virt_machine_5_2_options (mc);compat_props_add (mc->compat_props, hw_compat_5_1, hw_compat_5_1_len); + vmc->no_kvm_steal_time = true; }DEFINE_VIRT_MACHINE (5 ,1 )include/hw/arm/virt.h +5
-0@@ -54,6 +54,9 @@#define PPI (irq) ((irq) + 16) +/* See Linux kernel arch/arm64/include/asm/pvclock-abi.h */ +#define PVTIME_SIZE_PER_CPU 64 +enum {VIRT_FLASH ,VIRT_MEM ,@@ -81,6 +84,7 @@ enum {VIRT_PCDIMM_ACPI ,VIRT_ACPI_GED ,VIRT_NVDIMM_ACPI , +VIRT_PVTIME , VIRT_LOWMEMMAP_LAST, };@@ -126,6 +130,7 @@ struct VirtMachineClass {bool no_highmem_ecam;bool no_ged;/* Machines < 4.2 has no support for ACPI GED device */ bool kvm_no_adjvtime; +bool no_kvm_steal_time;bool acpi_expose_flash; };typedef struct VirtMachineClass VirtMachineClass ;target/arm/cpu.c +8
-0@@ -1310,6 +1310,14 @@ void arm_cpu_finalize_features(ARMCPU *cpu, Error **errp)return ; } } + +if (kvm_enabled ()) { +kvm_arm_steal_time_finalize (cpu, &local_err); +if (local_err !=NULL ) { +error_propagate (errp, local_err); +return ; + } + } }static void arm_cpu_realizefn (DeviceState *dev,Error **errp)target/arm/cpu.h +4
-0@@ -24,6 +24,7 @@#include "hw/registerfields.h" #include "cpu-qom.h" #include "exec/cpu-defs.h" +#include "qapi/qapi-types-common.h" /* ARM processors have a weak memory model */ #define TCG_GUEST_DEFAULT_MO (0)@@ -863,6 +864,9 @@ struct ARMCPU {bool kvm_vtime_dirty;uint64_t kvm_vtime; +/* KVM steal time */ +OnOffAuto kvm_steal_time; +/* Uniprocessor system with MP extensions */ bool mp_is_up;target/arm/kvm.c +16
-0@@ -192,6 +192,16 @@ static void kvm_no_adjvtime_set(Object *obj, bool value, Error **errp)ARM_CPU (obj)->kvm_adjvtime = !value; } +static bool kvm_steal_time_get (Object *obj,Error **errp) +{ +return ARM_CPU (obj)->kvm_steal_time !=ON_OFF_AUTO_OFF ; +} + +static void kvm_steal_time_set (Object *obj,bool value,Error **errp) +{ +ARM_CPU (obj)->kvm_steal_time = value ?ON_OFF_AUTO_ON :ON_OFF_AUTO_OFF ; +} +/* KVM VCPU properties should be prefixed with "kvm-". */ void kvm_arm_add_vcpu_properties (Object *obj) {@@ -207,6 +217,12 @@ void kvm_arm_add_vcpu_properties(Object *obj)"the virtual counter. VM stopped time " "will be counted."); } + + cpu->kvm_steal_time =ON_OFF_AUTO_AUTO ; +object_property_add_bool (obj,"kvm-steal-time" , kvm_steal_time_get, + kvm_steal_time_set); +object_property_set_description (obj,"kvm-steal-time" , +"Set off to disable KVM steal time." ); }bool kvm_arm_pmu_supported (void )target/arm/kvm64.c +59
-5@@ -17,6 +17,7 @@#include <linux/kvm.h> #include "qemu-common.h" +#include "qapi/error.h" #include "cpu.h" #include "qemu/timer.h" #include "qemu/error-report.h" @@ -397,19 +398,20 @@ static CPUWatchpoint *find_hw_watchpoint(CPUState *cpu, target_ulong addr)return NULL ; } -static bool kvm_arm_pmu_set_attr (CPUState *cs,struct kvm_device_attr *attr) +static bool kvm_arm_set_device_attr (CPUState *cs,struct kvm_device_attr *attr, +const char *name) {int err; err =kvm_vcpu_ioctl (cs,KVM_HAS_DEVICE_ATTR , attr);if (err !=0 ) { -error_report ("PMU: KVM_HAS_DEVICE_ATTR: %s" ,strerror (-err)); +error_report ("%s: KVM_HAS_DEVICE_ATTR: %s" , name,strerror (-err));return false; } err =kvm_vcpu_ioctl (cs,KVM_SET_DEVICE_ATTR , attr);if (err !=0 ) { -error_report ("PMU: KVM_SET_DEVICE_ATTR: %s" ,strerror (-err)); +error_report ("%s: KVM_SET_DEVICE_ATTR: %s" , name,strerror (-err));return false; }@@ -426,7 +428,7 @@ void kvm_arm_pmu_init(CPUState *cs)if (!ARM_CPU (cs)->has_pmu) {return ; } -if (!kvm_arm_pmu_set_attr (cs, &attr)) { +if (!kvm_arm_set_device_attr (cs, &attr,"PMU" )) {error_report ("failed to init PMU" );abort (); }@@ -443,12 +445,29 @@ void kvm_arm_pmu_set_irq(CPUState *cs, int irq)if (!ARM_CPU (cs)->has_pmu) {return ; } -if (!kvm_arm_pmu_set_attr (cs, &attr)) { +if (!kvm_arm_set_device_attr (cs, &attr,"PMU" )) {error_report ("failed to set irq for PMU" );abort (); }> } +void kvm_arm_pvtime_init (CPUState *cs,uint64_t ipa) +{ +struct kvm_device_attr attr = { + .group =KVM_ARM_VCPU_PVTIME_CTRL , + .attr =KVM_ARM_VCPU_PVTIME_IPA , + .addr = (uint64_t )&ipa, + }; + +if (ARM_CPU (cs)->kvm_steal_time ==ON_OFF_AUTO_OFF ) { +return ; + } +if (!kvm_arm_set_device_attr (cs, &attr,"PVTIME IPA" )) { +error_report ("failed to init PVTIME IPA" ); +abort (); + } +} +static int read_sys_reg32 (int fd,uint32_t *pret,uint64_t id) {uint64_t ret;@@ -651,6 +670,36 @@ bool kvm_arm_get_host_cpu_features(ARMHostCPUFeatures *ahcf)return true; } +void kvm_arm_steal_time_finalize (ARMCPU *cpu,Error **errp) +{ +bool has_steal_time =kvm_arm_steal_time_supported (); + +if (cpu->kvm_steal_time ==ON_OFF_AUTO_AUTO ) { +if (!has_steal_time || !arm_feature (&cpu->env,ARM_FEATURE_AARCH64 )) { + cpu->kvm_steal_time =ON_OFF_AUTO_OFF ; + }else { + cpu->kvm_steal_time =ON_OFF_AUTO_ON ; + } + }else if (cpu->kvm_steal_time ==ON_OFF_AUTO_ON ) { +if (!has_steal_time) { +error_setg (errp,"'kvm-steal-time' cannot be enabled " +"on this host" ); +return ; + }else if (!arm_feature (&cpu->env,ARM_FEATURE_AARCH64 )) { +/* +* DEN0057A chapter 2 says "This specification only covers +* systems in which the Execution state of the hypervisor +* as well as EL1 of virtual machines is AArch64.". And, +* to ensure that, the smc/hvc calls are only specified as +* smc64/hvc64. +*/ +error_setg (errp,"'kvm-steal-time' cannot be enabled " +"for AArch32 guests" ); +return ; + } + } +} +bool kvm_arm_aarch32_supported (void ) {return kvm_check_extension (kvm_state,KVM_CAP_ARM_EL1_32BIT );@@ -661,6 +710,11 @@ bool kvm_arm_sve_supported(void)return kvm_check_extension (kvm_state,KVM_CAP_ARM_SVE ); } +bool kvm_arm_steal_time_supported (void ) +{ +return kvm_check_extension (kvm_state,KVM_CAP_STEAL_TIME ); +} +QEMU_BUILD_BUG_ON (KVM_ARM64_SVE_VQ_MIN !=1 );void kvm_arm_sve_get_vls (CPUState *cs,unsigned long *map)target/arm/kvm_arm.h +43
-0@@ -267,6 +267,24 @@ void kvm_arm_set_cpu_features_from_host(ARMCPU *cpu);*/ void kvm_arm_add_vcpu_properties (Object *obj); +/** +* kvm_arm_steal_time_finalize: +* @cpu: ARMCPU for which to finalize kvm-steal-time +* @errp: Pointer to Error* for error propagation +* +* Validate the kvm-steal-time property selection and set its default +* based on KVM support and guest configuration. +*/ +void kvm_arm_steal_time_finalize (ARMCPU *cpu,Error **errp); + +/** +* kvm_arm_steal_time_supported: +* +* Returns: true if KVM can enable steal time reporting +* and false otherwise. +*/ +bool kvm_arm_steal_time_supported (void ); +/** * kvm_arm_aarch32_supported: * @@ -340,6 +358,16 @@ int kvm_arm_vgic_probe(void);void kvm_arm_pmu_set_irq (CPUState *cs,int irq);void kvm_arm_pmu_init (CPUState *cs); + +/** +* kvm_arm_pvtime_init: +* @cs: CPUState +* @ipa: Per-vcpu guest physical base address of the pvtime structures +* +* Initializes PVTIME for the VCPU, setting the PVTIME IPA to @ipa. +*/ +void kvm_arm_pvtime_init (CPUState *cs,uint64_t ipa); +int kvm_arm_set_irq (int cpu,int irqtype,int irq,int level);#else @@ -363,6 +391,11 @@ static inline bool kvm_arm_sve_supported(void)return false; } +static inline bool kvm_arm_steal_time_supported (void ) +{ +return false; +} +/* * These functions should never actually be called without KVM support. */ @@ -396,6 +429,16 @@ static inline void kvm_arm_pmu_init(CPUState *cs)g_assert_not_reached (); } +static inline void kvm_arm_pvtime_init (CPUState *cs,uint64_t ipa) +{ +g_assert_not_reached (); +} + +static inline void kvm_arm_steal_time_finalize (ARMCPU *cpu,Error **errp) +{ +g_assert_not_reached (); +} +static inline void kvm_arm_sve_get_vls (CPUState *cs,unsigned long *map) {g_assert_not_reached ();target/arm/monitor.c +1
-1@@ -103,7 +103,7 @@ static const char *cpu_model_advertised_features[] = {"sve128" ,"sve256" ,"sve384" ,"sve512" ,"sve640" ,"sve768" ,"sve896" ,"sve1024" ,"sve1152" ,"sve1280" ,"sve1408" ,"sve1536" ,"sve1664" ,"sve1792" ,"sve1920" ,"sve2048" , -"kvm-no-adjvtime" , +"kvm-no-adjvtime" ,"kvm-steal-time" ,NULL };tests/qtest/arm-cpu-features.c +21
-4@@ -452,6 +452,7 @@ static void test_query_cpu_model_expansion(const void *data)assert_set_feature (qts,"max" ,"pmu" , true);assert_has_not_feature (qts,"max" ,"kvm-no-adjvtime" ); +assert_has_not_feature (qts,"max" ,"kvm-steal-time" );if (g_str_equal (qtest_get_arch (),"aarch64" )) {assert_has_feature_enabled (qts,"max" ,"aarch64" );@@ -493,6 +494,7 @@ static void test_query_cpu_model_expansion_kvm(const void *data)assert_set_feature (qts,"host" ,"kvm-no-adjvtime" , false);if (g_str_equal (qtest_get_arch (),"aarch64" )) { +bool kvm_supports_steal_time;bool kvm_supports_sve;char max_name[8 ], name[8 ];uint32_t max_vq, vq;@@ -500,6 +502,10 @@ static void test_query_cpu_model_expansion_kvm(const void *data)QDict *resp;char *error; +assert_error (qts,"cortex-a15" , +"We cannot guarantee the CPU type 'cortex-a15' works " +"with KVM on this host" ,NULL ); +assert_has_feature_enabled (qts,"host" ,"aarch64" );/* Enabling and disabling pmu should always work. */ @@ -507,16 +513,26 @@ static void test_query_cpu_model_expansion_kvm(const void *data)assert_set_feature (qts,"host" ,"pmu" , false);assert_set_feature (qts,"host" ,"pmu" , true); -assert_error (qts,"cortex-a15" , -"We cannot guarantee the CPU type 'cortex-a15' works " -"with KVM on this host" ,NULL ); - +/* +* Some features would be enabled by default, but they're disabled +* because this instance of KVM doesn't support them. Test that the +* features are present, and, when enabled, issue further tests. +*/ +assert_has_feature (qts,"host" ,"kvm-steal-time" );assert_has_feature (qts,"host" ,"sve" ); + resp =do_query_no_props (qts,"host" ); + kvm_supports_steal_time =resp_get_feature (resp,"kvm-steal-time" ); kvm_supports_sve =resp_get_feature (resp,"sve" ); vls =resp_get_sve_vls (resp);qobject_unref (resp); +if (kvm_supports_steal_time) { +/* If we have steal-time then we should be able to toggle it. */ +assert_set_feature (qts,"host" ,"kvm-steal-time" , false); +assert_set_feature (qts,"host" ,"kvm-steal-time" , true); + } +if (kvm_supports_sve) {g_assert (vls !=0 ); max_vq =64 -__builtin_clzll (vls);@@ -577,6 +593,7 @@ static void test_query_cpu_model_expansion_kvm(const void *data)assert_has_not_feature (qts,"host" ,"aarch64" );assert_has_not_feature (qts,"host" ,"pmu" );assert_has_not_feature (qts,"host" ,"sve" ); +assert_has_not_feature (qts,"host" ,"kvm-steal-time" ); }qtest_quit (qts);
Hi Peter, Eric, and other interested parties,
Here's a gentle ping for reviewers.
Thanks,
drew
Quoted 52 lines · Andrew Jones
Previous posting:
https://www.mail-archive.com/[email protected]/msg727588.htmlv3:
- Rebased: 5.2 machine type and kvm32 drop now included
- Switched to using new KVM cap that has been merged upstream
- Picked up some r-b's and some of Eric's comments from v2KVM supports the ability to publish the amount of time that VCPUs were runnable, but not running due to other host threads running instead, to the guest. The guest scheduler may use that information when making decisions and the guest may expose it to its userspace (Linux publishes this information in
/proc/stat). This feature is called "steal time" as it represents the amount of time stolen from a guest by scheduling out its VCPUs. To enable this feature KVM userspace must provide a memory region that will be used to publish the information to the guest. The memory region is typical migratable region. The GPA of the region is given to KVM through a VCPU device ioctl interface. This feature is only available for 64-bit guests per the Arm PVTIME specification (DEN0057A).This series provides the QEMU support of this feature. It will be enabled by default for 5.2 machine types and later, but may be disabled with a new CPU property "kvm-steal-time".
Thanks,
drewAndrew Jones (5):
target/arm/kvm: Make uncalled stubs explicitly unreachable hw/arm/virt: Move post cpu realize check into its own function hw/arm/virt: Move kvm pmu setup tovirt_cpu_post_initDO NOT MERGE: HACK: Add steal time KVM cap tokvm.hhw/arm/virt: Implement kvm-steal-timedocs/system/arm/cpu-features.rst | 11 ++++ hw/arm/virt.c | 110 ++++++++++++++++++++++--------- include/hw/arm/virt.h | 5 ++ linux-headers/linux/kvm.h | 1 + target/arm/cpu.c | 8 +++ target/arm/cpu.h | 4 ++ target/arm/kvm.c | 16 +++++ target/arm/kvm64.c | 64 ++++++++++++++++-- target/arm/kvm_arm.h | 94 ++++++++++++++++++++------ target/arm/monitor.c | 2 +- tests/qtest/arm-cpu-features.c | 25 +++++-- 11 files changed, 281 insertions(+), 59 deletions(-)Signature · 1 line
2.26.2
Quoted 4 lines · Andrew Jones
Hi Peter, Eric, and other interested parties,
Here's a gentle ping for reviewers.
Thanks for the review Eric! I'll send a Linux header update patch and a rebase of this series with R-b's.
drew
Quoted 59 lines
Thanks,
drewQuoted 52 lines · Andrew Jones
Previous posting:
https://www.mail-archive.com/[email protected]/msg727588.htmlv3:
- Rebased: 5.2 machine type and kvm32 drop now included
- Switched to using new KVM cap that has been merged upstream
- Picked up some r-b's and some of Eric's comments from v2KVM supports the ability to publish the amount of time that VCPUs were runnable, but not running due to other host threads running instead, to the guest. The guest scheduler may use that information when making decisions and the guest may expose it to its userspace (Linux publishes this information in
/proc/stat). This feature is called "steal time" as it represents the amount of time stolen from a guest by scheduling out its VCPUs. To enable this feature KVM userspace must provide a memory region that will be used to publish the information to the guest. The memory region is typical migratable region. The GPA of the region is given to KVM through a VCPU device ioctl interface. This feature is only available for 64-bit guests per the Arm PVTIME specification (DEN0057A).This series provides the QEMU support of this feature. It will be enabled by default for 5.2 machine types and later, but may be disabled with a new CPU property "kvm-steal-time".
Thanks,
drewAndrew Jones (5):
target/arm/kvm: Make uncalled stubs explicitly unreachable hw/arm/virt: Move post cpu realize check into its own function hw/arm/virt: Move kvm pmu setup tovirt_cpu_post_initDO NOT MERGE: HACK: Add steal time KVM cap tokvm.hhw/arm/virt: Implement kvm-steal-timedocs/system/arm/cpu-features.rst | 11 ++++ hw/arm/virt.c | 110 ++++++++++++++++++++++--------- include/hw/arm/virt.h | 5 ++ linux-headers/linux/kvm.h | 1 + target/arm/cpu.c | 8 +++ target/arm/cpu.h | 4 ++ target/arm/kvm.c | 16 +++++ target/arm/kvm64.c | 64 ++++++++++++++++-- target/arm/kvm_arm.h | 94 ++++++++++++++++++++------ target/arm/monitor.c | 2 +- tests/qtest/arm-cpu-features.c | 25 +++++-- 11 files changed, 281 insertions(+), 59 deletions(-)Signature · 1 line
2.26.2