Skip to contentSkip to conversation

drm/panel: panel-simple: Add Sharp LQ070Y3LG05

PATCH In review Daniel Schultz 4 participants 6 messages Nov 24, 2025 – Nov 26, 2025

Subsystems (4)
lore
Share & tools
lore
#0 lore raw

PATCH 1/2 drm/panel: panel-simple: Add Sharp LQ070Y3LG05

Add the Sharp LQ070Y3LG05 7" WVGA lanscape LVDS RGB TFT-LCD panel.

---
 drivers/gpu/drm/panel/panel-simple.c | 28 ++++++++++++++++++++++++++++
 1 file changed, 28 insertions(+)
drivers/gpu/drm/panel/panel-simple.c +28 -0
index 0019de93be1b..9ad6beeb9952 100644
@@ -4266,6 +4266,31 @@ static const struct panel_desc sharp_lq070y3dg3b = {
 		     DRM_BUS_FLAG_SYNC_DRIVE_POSEDGE,
 };
 
+static const struct display_timing sharp_lq070y3lg05_timing = {
+	.pixelclock = { 28000000, 33000000, 40000000 },
+	.hactive = { 800, 800, 800 },
+	.hfront_porch = { 40, 40, 40 },
+	.hback_porch = { 40, 40, 40 },
+	.hsync_len = { 48, 48, 48 },
+	.vactive = { 480, 480, 480 },
+	.vfront_porch = { 13, 13, 13 },
+	.vback_porch = { 29, 29, 29 },
+	.vsync_len = { 3, 3, 3 },
+	.flags = DISPLAY_FLAGS_PIXDATA_POSEDGE,
+};
+
+static const struct panel_desc sharp_lq070y3lg05 = {
+	.timings = &sharp_lq070y3lg05_timing,
+	.num_timings = 1,
+	.bpc = 8,
+	.size = {
+		.width = 154,	/* 153.6mm */
+		.height = 87,	/* 86.6mm */
+	},
+	.bus_format = MEDIA_BUS_FMT_RGB888_1X7X4_SPWG,
+	.connector_type = DRM_MODE_CONNECTOR_LVDS,
+};
+
 static const struct drm_display_mode sharp_lq035q7db03_mode = {
 	.clock = 5500,
 	.hdisplay = 240,
@@ -5367,6 +5392,9 @@ static const struct of_device_id platform_of_match[] = {
 	}, {
 		.compatible = "sharp,lq070y3dg3b",
 		.data = &sharp_lq070y3dg3b,
+	}, {
+		.compatible = "sharp,lq070y3lg05",
+		.data = &sharp_lq070y3lg05,
 	}, {
 		.compatible = "sharp,lq101k1ly04",
 		.data = &sharp_lq101k1ly04,
Signature · 1 line
2.25.1
#1 lore raw

PATCH 2/2 dt-bindings: display: simple: Add Sharp LQ070Y3LG05

Add the Sharp LQ070Y3LG05 7" WVGA lanscape LVDS RGB TFT-LCD panel.

---
 .../devicetree/bindings/display/panel/panel-simple.yaml         | 2 ++
 1 file changed, 2 insertions(+)
Documentation/devicetree/bindings/display/panel/panel-simple.yaml +2 -0
index 2017428d8828..3a55829f960b 100644
@@ -284,6 +284,8 @@ properties:
       - sharp,lq035q7db03
         # Sharp LQ070Y3DG3B 7.0" WVGA landscape TFT LCD panel
       - sharp,lq070y3dg3b
+        # Sharp LQ070Y3LG05 7.0" WVGA langscape LVDS TFT LCD panel
+      - sharp,lq070y3lg05
         # Sharp Display Corp. LQ101K1LY04 10.07" WXGA TFT LCD panel
       - sharp,lq101k1ly04
         # Sharp LS020B1DD01D 2.0" HQVGA TFT LCD panel
Signature · 1 line
2.25.1
Acked-by on v1 2/2
#2 lore raw

Re: [PATCH 2/2] dt-bindings: display: simple: Add Sharp LQ070Y3LG05

Quoted 4 lines · Daniel Schultz

Add the Sharp LQ070Y3LG05 7" WVGA lanscape LVDS RGB TFT-LCD panel.

---

In the future:
Please organize the patch documenting the compatible (DT bindings) before the patch using that compatible.
See also:
https://elixir.bootlin.com/linux/v6.14-rc6/source/Documentation/devicetree/bindings/submitting-patches.rst#L46

Best regards,
Krzysztof

#4 lore raw
Quoted 8 lines · Maxime Ripard
Quoted 6 lines · Daniel Schultz

Add the Sharp LQ070Y3LG05 7" WVGA lanscape LVDS RGB TFT-LCD panel.

---
  drivers/gpu/drm/panel/panel-simple.c | 28 ++++++++++++++++++++++++++++
  1 file changed, 28 insertions(+)

Any reason to use panel-simple over panel-lvds?

I didn't know panel-lvds exist. I just convert these timings to panel-lvds and works fine, too. Thanks!

I don't plan to send my device-tree with the new timings included in the near future. Should or can I already add this panel as compatible to panel-simple.yaml?

- Daniel

Quoted 2 lines

Maxime

#5 lore raw
Quoted 8 lines · Daniel Schultz
Quoted 7 lines · Maxime Ripard
Quoted 6 lines · Daniel Schultz

Add the Sharp LQ070Y3LG05 7" WVGA lanscape LVDS RGB TFT-LCD panel.

---
  drivers/gpu/drm/panel/panel-simple.c | 28 ++++++++++++++++++++++++++++

  1 file changed, 28 insertions(+)
Quoted 5 lines
Quoted 1 line

Any reason to use panel-simple over panel-lvds?

I didn't know panel-lvds exist. I just convert these timings to panel-lvds and works fine, too. Thanks!

I don't plan to send my device-tree with the new timings included in the near future. Should or can I already add this panel as compatible to panel-simple.yaml?

Any reason why it won't fit in Documentation/devicetree/bindings/display/panel/panel-lvds.yaml ?

Neil

Quoted 5 lines

- Daniel

Quoted 2 lines

Maxime