monitor: increase amount of data for monitor to read
PATCH 1/1 monitor: increase amount of data for monitor to read
Right now QMP and HMP monitors read 1 byte at a time from the socket, which is very inefficient. With 100+ VMs on the host this easily reasults in a lot of unnecessary system calls and CPU usage in the system.
This patch changes the amount of data to read to 4096 bytes, which matches buffer size on the channel level. Fortunately, monitor protocol is synchronous right now thus we should not face side effects in reality.
--- include/monitor/monitor.h | 2 +- monitor.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-)
include/monitor/monitor.h +1 -1
@@ -14,7 +14,7 @@ extern __thread Monitor *cur_mon;#define MONITOR_USE_CONTROL 0x04#define MONITOR_USE_PRETTY 0x08 -#define QMP_REQ_QUEUE_LEN_MAX 8 +#define QMP_REQ_QUEUE_LEN_MAX 4096bool monitor_cur_is_qmp (void );
monitor.c +1 -1
@@ -4097,7 +4097,7 @@ static int monitor_can_read(void *opaque) {Monitor *mon = opaque; -return !atomic_mb_read (&mon->suspend_cnt); +return !atomic_mb_read (&mon->suspend_cnt) ?4096 :0 ; }/*
Signature · 1 line
2.17.0
Did this fall through the cracks?
Quoted 3 lines · Denis Plotnikov
Right now QMP and HMP monitors read 1 byte at a time from the socket, which is very inefficient. With 100+ VMs on the host this easily reasults in a lot of unnecessary system calls and CPU usage in the system.
Yes, reading one byte at a time is awful. But QMP is control plane; I didn't expect it to impact system performance. How are you using QMP? Just curious, not actually opposed to improving QMP efficiency.
Quoted 16 lines
This patch changes the amount of data to read to 4096 bytes, which matches buffer size on the channel level. Fortunately, monitor protocol is synchronous right now thus we should not face side effects in reality.
Signed-off-by Denis V. Lunev <[email protected]>Signed-off-by Denis Plotnikov <[email protected]>--- include/monitor/monitor.h | 2 +- monitor.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-)include/monitor/monitor.h +0
-0
include/monitor/monitor.h extern __thread Monitor *cur_mon; · line 17
Quoted 5 lines
include/monitor/monitor.h +1
-1@@ -14,7 +14,7 @@ extern __thread Monitor *cur_mon;#define MONITOR_USE_CONTROL 0x04#define MONITOR_USE_PRETTY 0x08 -#define QMP_REQ_QUEUE_LEN_MAX 8 +#define QMP_REQ_QUEUE_LEN_MAX 4096
This looks suspicious. It's a request count, not a byte count. Can you explain what led you to change it this way?
Quoted 8 lines
include/monitor/monitor.h +0
-0bool monitor_cur_is_qmp (void );monitor.c +0
-0
monitor.c static int monitor_can_read(void *opaque) · line 4103
Quoted 8 lines
monitor.c +1
-1@@ -4097,7 +4097,7 @@ static int monitor_can_read(void *opaque) {Monitor *mon = opaque; -return !atomic_mb_read (&mon->suspend_cnt); +return !atomic_mb_read (&mon->suspend_cnt) ?4096 :0 ; }/*
The ramifications are not obvious to me. I think I need to (re-)examine how QMP reads input, with special consideration to its OOB feature.
Quoted 10 lines · Markus Armbruster
Did this fall through the cracks?
Quoted 3 lines · Denis Plotnikov
Right now QMP and HMP monitors read 1 byte at a time from the socket, which is very inefficient. With 100+ VMs on the host this easily reasults in a lot of unnecessary system calls and CPU usage in the system.
Yes, reading one byte at a time is awful. But QMP is control plane; I didn't expect it to impact system performance. How are you using QMP? Just curious, not actually opposed to improving QMP efficiency.
500 VMs on a host, each 30 seconds libvirts executes AFAIR 3-5 commands with default settings. This results in at least some load. It is not very significant, but it is noticeable.
This reduces idle CPU consumption around 1-2% observable via top, which is not that small amount.
Den
Quoted 48 lines · * Markus Armbruster ([email protected]) wrote:
Did this fall through the cracks?
Quoted 3 lines · Denis Plotnikov
Right now QMP and HMP monitors read 1 byte at a time from the socket, which is very inefficient. With 100+ VMs on the host this easily reasults in a lot of unnecessary system calls and CPU usage in the system.
Yes, reading one byte at a time is awful. But QMP is control plane; I didn't expect it to impact system performance. How are you using QMP? Just curious, not actually opposed to improving QMP efficiency.
Quoted 16 lines
This patch changes the amount of data to read to 4096 bytes, which matches buffer size on the channel level. Fortunately, monitor protocol is synchronous right now thus we should not face side effects in reality.
Signed-off-by Denis V. Lunev <[email protected]>Signed-off-by Denis Plotnikov <[email protected]>--- include/monitor/monitor.h | 2 +- monitor.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-)include/monitor/monitor.h +0
-0include/monitor/monitor.h extern __thread Monitor *cur_mon; · line 17
Quoted 5 lines
include/monitor/monitor.h +1
-1@@ -14,7 +14,7 @@ extern __thread Monitor *cur_mon;#define MONITOR_USE_CONTROL 0x04#define MONITOR_USE_PRETTY 0x08 -#define QMP_REQ_QUEUE_LEN_MAX 8 +#define QMP_REQ_QUEUE_LEN_MAX 4096This looks suspicious. It's a request count, not a byte count. Can you explain what led you to change it this way?
Quoted 11 lines
include/monitor/monitor.h +0
-0bool monitor_cur_is_qmp (void );monitor.c +0
-0@@ -4097,7 +4097,7 @@ static int monitor_can_read(void *opaque) {Monitor *mon = opaque;
Quoted 8 lines
monitor.c static int monitor_can_read(void *opaque) · line 4103
Quoted 5 lines
monitor.c +1
-1-return !atomic_mb_read (&mon->suspend_cnt); +return !atomic_mb_read (&mon->suspend_cnt) ?4096 :0 ; }/* The ramifications are not obvious to me. I think I need to (re-)examine how QMP reads input, with special consideration to its OOB feature.
Yeh that was the bit that worried me; I also wondered what happens with monitor_suspend and things like fd passing; enough to make it non-obvious to me.
Dave
--
Dr. David Alan Gilbert / [email protected] / Manchester, UK
Hi all!
This patch isn't outdated, it applies on master with a little conflict atomic_mb_read -> qatomic_mb_read
We have new series "[PATCH v2 0/2] Increase amount of data for monitor to read", but I do think that we've started from wrong point. And actually we should start from this old patch.
Quoted 32 lines · Dr. David Alan Gilbert
Quoted 31 lines · * Markus Armbruster ([email protected]) wrote:
Did this fall through the cracks?
Quoted 3 lines · Denis Plotnikov
Right now QMP and HMP monitors read 1 byte at a time from the socket, which is very inefficient. With 100+ VMs on the host this easily reasults in a lot of unnecessary system calls and CPU usage in the system.
Yes, reading one byte at a time is awful. But QMP is control plane; I didn't expect it to impact system performance. How are you using QMP? Just curious, not actually opposed to improving QMP efficiency.
Quoted 19 lines
This patch changes the amount of data to read to 4096 bytes, which matches buffer size on the channel level. Fortunately, monitor protocol is synchronous right now thus we should not face side effects in reality.
Signed-off-by Denis V. Lunev <[email protected]>Signed-off-by Denis Plotnikov <[email protected]>--- include/monitor/monitor.h | 2 +- monitor.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-)include/monitor/monitor.h +0
-0@@ -14,7 +14,7 @@ extern __thread Monitor *cur_mon;#define MONITOR_USE_CONTROL 0x04#define MONITOR_USE_PRETTY 0x08
Quoted 5 lines
Quoted 5 lines
include/monitor/monitor.h extern __thread Monitor *cur_mon; · line 17
Quoted 2 lines
include/monitor/monitor.h +1
-1-#define QMP_REQ_QUEUE_LEN_MAX 8 +#define QMP_REQ_QUEUE_LEN_MAX 4096This looks suspicious. It's a request count, not a byte count. Can you explain what led you to change it this way?
I can explain, because that was my idea:
It's a hack to not overflow the queue. With just the second hunk we overflow it and assertion fails. So, I decided that if we allow to read up to 4096, we will not add more than 4096 commands simultaneously. And that works..
Still, now I don't think it's enough: who guarantee that we will not read new commands when queue is half-full?
I think, that we just need two limits: QUEUE_SOFT_LEN an QUEUE_HARD_LEN (suggest better names). So, when QUEUE_SOFT_LEN is reached we do suspend the monitor (like when queue is full currently). And in monitor_can_read() we allow to read (QUEUE_HARD_LEN - QUEUE_SOFT_LEN). In this way queue will never overflow the QUEUE_HARD_LEN.
Also, what is the minimum character length of the command? I just decided that better safe than sorry, considering one character as possible full command. What is the smallest command which parser will parse? Is it {} ? Or may be {"execute":""} ? We can use this knowledge, to understand how many commands we should be prepared to accept, when we allow N characters in monitor_can_read(). So, 4096 is probably too much for QMP_REQ_QUEUE_LEN_MAX.
Quoted 16 lines
Quoted 16 lines
Quoted 16 lines
include/monitor/monitor.h +0
-0bool monitor_cur_is_qmp (void );monitor.c +1
-1@@ -4097,7 +4097,7 @@ static int monitor_can_read(void *opaque) {Monitor *mon = opaque; -return !atomic_mb_read (&mon->suspend_cnt); +return !atomic_mb_read (&mon->suspend_cnt) ?4096 :0 ; }
Quoted 9 lines
Quoted 4 lines
monitor.c static int monitor_can_read(void *opaque) · line 4103
Quoted 1 line
monitor.c +0
-0/* The ramifications are not obvious to me. I think I need to (re-)examine how QMP reads input, with special consideration to its OOB feature.
Yeh that was the bit that worried me; I also wondered what happens with
monitor_suspendand things like fd passing; enough to make it non-obvious to me.
OK, I don't have answers..
Markus, David, could you please help? Or, what to do? We of course don't have enough expertise to prove that patch will not break any feature in the whole monitor subsystem.
I can say that it just works, and we live with it for years (and our customers too), and tests pass. Still, I don't think that we use OOB feature. I remember some problems with it, when RHEL version which we were based on included some OOB feature patches, but not some appropriate fixes.. But it was long ago.
If nobody can say that patch is wrong, maybe, we can just apply it? We'll have the whole release cycle to catch any bugs and revert the commit at any time. In this way we only have a question about QMP_REQ_QUEUE_LEN_MAX, which is quite simple.
Signature · 2 lines
Best regards, Vladimir
Quoted 77 lines · Vladimir Sementsov-Ogievskiy
Hi all!
This patch isn't outdated, it applies on master with a little conflict
atomic_mb_read->qatomic_mb_readWe have new series "[PATCH v2 0/2] Increase amount of data for monitor to read", but I do think that we've started from wrong point. And actually we should start from this old patch.
Quoted 24 lines · Dr. David Alan Gilbert
Quoted 23 lines · * Markus Armbruster ([email protected]) wrote:
Did this fall through the cracks?
Quoted 3 lines · Denis Plotnikov
Right now QMP and HMP monitors read 1 byte at a time from the socket, which is very inefficient. With 100+ VMs on the host this easily reasults in a lot of unnecessary system calls and CPU usage in the system.
Yes, reading one byte at a time is awful. But QMP is control plane; I didn't expect it to impact system performance. How are you using QMP? Just curious, not actually opposed to improving QMP efficiency.
Quoted 11 lines
This patch changes the amount of data to read to 4096 bytes, which matches buffer size on the channel level. Fortunately, monitor protocol is synchronous right now thus we should not face side effects in reality.
Signed-off-by Denis V. Lunev <[email protected]>Signed-off-by Denis Plotnikov <[email protected]>---
include/monitor/monitor.h| 2 +-
monitor.c | 2 +-2 files changed, 2 insertions(+), 2 deletions(-)Quoted 12 lines
Quoted 4 lines
Quoted 4 lines
include/monitor/monitor.h +0
-0Quoted 8 lines
include/monitor/monitor.h extern __thread Monitor *cur_mon; · line 16
Quoted 5 lines
include/monitor/monitor.h +1
-1@@ -14,7 +14,7 @@ extern __thread Monitor *cur_mon; #define MONITOR_USE_CONTROL 0x04 #define MONITOR_USE_PRETTY 0x08 -#define QMP_REQ_QUEUE_LEN_MAX 8 +#define QMP_REQ_QUEUE_LEN_MAX 4096This looks suspicious. It's a request count, not a byte count. Can you explain what led you to change it this way?
I can explain, because that was my idea:
It's a hack to not overflow the queue. With just the second hunk we overflow it and assertion fails. So, I decided that if we allow to read up to 4096, we will not add more than 4096 commands simultaneously. And that works..
Still, now I don't think it's enough: who guarantee that we will not read new commands when queue is half-full?
I think, that we just need two limits:
QUEUE_SOFT_LENanQUEUE_HARD_LEN(suggest better names). So, whenQUEUE_SOFT_LENis reached we do suspend the monitor (like when queue is full currently). And inmonitor_can_read()we allow to read (QUEUE_HARD_LEN-QUEUE_SOFT_LEN). In this way queue will never overflow theQUEUE_HARD_LEN.Also, what is the minimum character length of the command? I just decided that better safe than sorry, considering one character as possible full command. What is the smallest command which parser will parse? Is it {} ? Or may be {"execute":""} ? We can use this knowledge, to understand how many commands we should be prepared to accept, when we allow N characters in
monitor_can_read(). So, 4096 is probably too much forQMP_REQ_QUEUE_LEN_MAX.Quoted 17 lines
Quoted 16 lines
monitor.c static int monitor_can_read(void *opaque) · line 4101
Quoted 13 lines
include/monitor/monitor.h +0
-0bool monitor_cur_is_qmp(void);monitor.c +1
-1@@ -4097,7 +4097,7 @@ static int monitor_can_read(void *opaque) { Monitor *mon = opaque; - return !atomic_mb_read(&mon->suspend_cnt); + return !atomic_mb_read(&mon->suspend_cnt) ? 4096 : 0; } /*The ramifications are not obvious to me. I think I need to (re-)examine how QMP reads input, with special consideration to its OOB feature.
Quoted 4 lines
Yeh that was the bit that worried me; I also wondered what happens with
monitor_suspendand things like fd passing; enough to make it non-obvious to me.
Quoted 8 lines
OK, I don't have answers..
Markus, David, could you please help? Or, what to do? We of course don't have enough expertise to prove that patch will not break any feature in the whole monitor subsystem.
I can say that it just works, and we live with it for years (and our customers too), and tests pass. Still, I don't think that we use OOB feature. I remember some problems with it, when RHEL version which we were based on included some OOB feature patches, but not some appropriate fixes.. But it was long ago.
If nobody can say that patch is wrong, maybe, we can just apply it? We'll have the whole release cycle to catch any bugs and revert the commit at any time. In this way we only have a question about
QMP_REQ_QUEUE_LEN_MAX, which is quite simple.
ping here, as a replacement for "[PATCH v3 0/5] Increase amount of data for monitor to read"
If no better idea, I'll make what I propose above (with two limits) at some good moment :)
Signature · 2 lines
Best regards, Vladimir
Quoted 45 lines · Vladimir Sementsov-Ogievskiy
Quoted 44 lines · Vladimir Sementsov-Ogievskiy
Hi all!
This patch isn't outdated, it applies on master with a little conflict
atomic_mb_read->qatomic_mb_readWe have new series "[PATCH v2 0/2] Increase amount of data for monitor to read", but I do think that we've started from wrong point. And actually we should start from this old patch.
Quoted 36 lines · Dr. David Alan Gilbert
Quoted 35 lines · * Markus Armbruster ([email protected]) wrote:
Did this fall through the cracks?
Quoted 3 lines · Denis Plotnikov
Right now QMP and HMP monitors read 1 byte at a time from the socket, which is very inefficient. With 100+ VMs on the host this easily reasults in a lot of unnecessary system calls and CPU usage in the system.
Yes, reading one byte at a time is awful. But QMP is control plane; I didn't expect it to impact system performance. How are you using QMP? Just curious, not actually opposed to improving QMP efficiency.
Quoted 16 lines
This patch changes the amount of data to read to 4096 bytes, which matches buffer size on the channel level. Fortunately, monitor protocol is synchronous right now thus we should not face side effects in reality.
Signed-off-by Denis V. Lunev <[email protected]>Signed-off-by Denis Plotnikov <[email protected]>--- include/monitor/monitor.h | 2 +- monitor.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-)include/monitor/monitor.h +0
-0include/monitor/monitor.h extern __thread Monitor *cur_mon; · line 16
Quoted 4 lines
include/monitor/monitor.h +1
-1@@ -14,7 +14,7 @@ extern __thread Monitor *cur_mon;#define MONITOR_USE_CONTROL 0x04#define MONITOR_USE_PRETTY 0x08 -#define QMP_REQ_QUEUE_LEN_MAX 8 +#define QMP_REQ_QUEUE_LEN_MAX 4096This looks suspicious. It's a request count, not a byte count. Can you explain what led you to change it this way?
Quoted 3 lines
Quoted 3 lines
I can explain, because that was my idea:
It's a hack to not overflow the queue. With just the second hunk we overflow it and assertion fails.
I can't see offhand how that happens. Got a reproducer for me?
Quoted 1 line
Quoted 1 line
So, I decided that if we allow to read up to 4096, we will not add more than 4096 commands simultaneously. And that works..
Uff!
Quoted 3 lines
Quoted 3 lines
Still, now I don't think it's enough: who guarantee that we will not read new commands when queue is half-full?
I think, that we just need two limits:
QUEUE_SOFT_LENanQUEUE_HARD_LEN(suggest better names). So, whenQUEUE_SOFT_LENis reached we do suspend the monitor (like when queue is full currently). And inmonitor_can_read()we allow to read (QUEUE_HARD_LEN-QUEUE_SOFT_LEN). In this way queue will never overflow theQUEUE_HARD_LEN.
I'm not sure I understand. Maybe I will once I understand the queue overflow. Or revised patches.
Quoted 2 lines
Quoted 2 lines
Also, what is the minimum character length of the command? I just decided that better safe than sorry, considering one character as possible full command. What is the smallest command which parser will parse? Is it {} ? Or may be {"execute":""} ? We can use this knowledge, to understand how many commands we should be prepared to accept, when we allow N characters in
monitor_can_read(). So, 4096 is probably too much forQMP_REQ_QUEUE_LEN_MAX.
I'm supicious of solutions that tie the request queue length to the read buffer size. Maybe my suspicions will dissipate once I understand the queue overflow.
Now let me answer your question.
The queue is fed by handle_qmp_command().
It gets called by the JSON parser for each complete JSON value and for each parse error.
When the JSON value is a JSON object with an 'exec-oob' key and no 'execute' key, handle_qmp_command() bypasses the queue.
Anything else goes into the queue.
The shortest JSON values are 0, 1, ..., 9. A sequence of them needs to be separated by whitespace. N characters of input can therefore produce up to ceil(N/2) JSON values.
Input that makes the parser report one error per input character exists:
"}}}}}" produces one parse error for each '}'. I believe every parse error should consume at least one input character, but we'd have to double-check before we rely on it.
Quoted 29 lines
Quoted 29 lines
Quoted 18 lines
Quoted 17 lines
Quoted 8 lines
include/monitor/monitor.h +0
-0bool monitor_cur_is_qmp (void );monitor.c +0
-0monitor.c static int monitor_can_read(void *opaque) · line 4101
Quoted 6 lines
monitor.c +1
-1@@ -4097,7 +4097,7 @@ static int monitor_can_read(void *opaque) {Monitor *mon = opaque; -return !atomic_mb_read (&mon->suspend_cnt); +return !atomic_mb_read (&mon->suspend_cnt) ?4096 :0 ; }/* The ramifications are not obvious to me. I think I need to (re-)examine how QMP reads input, with special consideration to its OOB feature.
Quoted 4 lines
Yeh that was the bit that worried me; I also wondered what happens with
monitor_suspendand things like fd passing; enough to make it non-obvious to me.OK, I don't have answers..
Markus, David, could you please help? Or, what to do? We of course don't have enough expertise to prove that patch will not break any feature in the whole monitor subsystem.
I can say that it just works, and we live with it for years (and our customers too), and tests pass. Still, I don't think that we use OOB feature. I remember some problems with it, when RHEL version which we were based on included some OOB feature patches, but not some appropriate fixes.. But it was long ago.
Quoted 7 lines
Quoted 2 lines
If nobody can say that patch is wrong, maybe, we can just apply it? We'll have the whole release cycle to catch any bugs and revert the commit at any time. In this way we only have a question about
QMP_REQ_QUEUE_LEN_MAX, which is quite simple.ping here, as a replacement for "[PATCH v3 0/5] Increase amount of data for monitor to read"
If no better idea, I'll make what I propose above (with two limits) at some good moment :)
Digest what I wrote above, then tell me how you'd like to proceed.
Quoted 47 lines · Markus Armbruster
Quoted 45 lines · Vladimir Sementsov-Ogievskiy
Quoted 44 lines · Vladimir Sementsov-Ogievskiy
Hi all!
This patch isn't outdated, it applies on master with a little conflict
atomic_mb_read->qatomic_mb_readWe have new series "[PATCH v2 0/2] Increase amount of data for monitor to read", but I do think that we've started from wrong point. And actually we should start from this old patch.
Quoted 36 lines · Dr. David Alan Gilbert
Quoted 35 lines · * Markus Armbruster ([email protected]) wrote:
Did this fall through the cracks?
Quoted 3 lines · Denis Plotnikov
Right now QMP and HMP monitors read 1 byte at a time from the socket, which is very inefficient. With 100+ VMs on the host this easily reasults in a lot of unnecessary system calls and CPU usage in the system.
Yes, reading one byte at a time is awful. But QMP is control plane; I didn't expect it to impact system performance. How are you using QMP? Just curious, not actually opposed to improving QMP efficiency.
Quoted 16 lines
This patch changes the amount of data to read to 4096 bytes, which matches buffer size on the channel level. Fortunately, monitor protocol is synchronous right now thus we should not face side effects in reality.
Signed-off-by Denis V. Lunev <[email protected]>Signed-off-by Denis Plotnikov <[email protected]>--- include/monitor/monitor.h | 2 +- monitor.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-)include/monitor/monitor.h +0
-0include/monitor/monitor.h extern __thread Monitor *cur_mon; · line 16
Quoted 4 lines
include/monitor/monitor.h +1
-1@@ -14,7 +14,7 @@ extern __thread Monitor *cur_mon;#define MONITOR_USE_CONTROL 0x04#define MONITOR_USE_PRETTY 0x08 -#define QMP_REQ_QUEUE_LEN_MAX 8 +#define QMP_REQ_QUEUE_LEN_MAX 4096This looks suspicious. It's a request count, not a byte count. Can you explain what led you to change it this way?
Quoted 5 lines
Quoted 3 lines
Quoted 3 lines
I can explain, because that was my idea:
It's a hack to not overflow the queue. With just the second hunk we overflow it and assertion fails.
I can't see offhand how that happens. Got a reproducer for me?
Yes:
[root@kvm master]# echo '{'execute': 'qmp_capabilities'}{'execute': 'query-block'}{'execute': 'query-block'}{'execute': 'query-block'}{'execute': 'query-block'}{'execute': 'query-block'}{'execute': 'query-block'}{'execute': 'query-block'}{'execute': 'query-block'}{'execute': 'query-block'}{'execute': 'query-block'}{'execute': 'query-block'}{'execute': 'query-block'}' | ./build/qemu-system-x86_64 -nodefaults -nographic -S -qmp stdio {"QMP": {"version": {"qemu": {"micro": 50, "minor": 2, "major": 5}, "package": "v5.2.0-2359-g0b9242f339-dirty"}, "capabilities": ["oob"]}}
qemu-system-x86_64: ../monitor/qmp.c:400: handle_qmp_command: Assertion `mon->qmp_requests->length < QMP_REQ_QUEUE_LEN_MAX' failed.
Aborted (core dumped)
[root@kvm master]# git diff
monitor/monitor.c +1 -1
@@ -562,7 +562,7 @@ int monitor_can_read(void *opaque) {Monitor *mon = opaque; -return !qatomic_mb_read (&mon->suspend_cnt); +return !qatomic_mb_read (&mon->suspend_cnt) ?4096 :0 ; }void monitor_list_append (Monitor *mon)
Quoted 31 lines
Quoted 2 lines
Quoted 2 lines
So, I decided that if we allow to read up to 4096, we will not add more than 4096 commands simultaneously. And that works..
Uff!
Quoted 3 lines
Quoted 3 lines
Still, now I don't think it's enough: who guarantee that we will not read new commands when queue is half-full?
I think, that we just need two limits:
QUEUE_SOFT_LENanQUEUE_HARD_LEN(suggest better names). So, whenQUEUE_SOFT_LENis reached we do suspend the monitor (like when queue is full currently). And inmonitor_can_read()we allow to read (QUEUE_HARD_LEN-QUEUE_SOFT_LEN). In this way queue will never overflow theQUEUE_HARD_LEN.I'm not sure I understand. Maybe I will once I understand the queue overflow. Or revised patches.
Quoted 2 lines
Quoted 2 lines
Also, what is the minimum character length of the command? I just decided that better safe than sorry, considering one character as possible full command. What is the smallest command which parser will parse? Is it {} ? Or may be {"execute":""} ? We can use this knowledge, to understand how many commands we should be prepared to accept, when we allow N characters in
monitor_can_read(). So, 4096 is probably too much forQMP_REQ_QUEUE_LEN_MAX.I'm supicious of solutions that tie the request queue length to the read buffer size. Maybe my suspicions will dissipate once I understand the queue overflow.
Now let me answer your question.
The queue is fed by
handle_qmp_command().It gets called by the JSON parser for each complete JSON value and for each parse error.
When the JSON value is a JSON object with an 'exec-oob' key and no 'execute' key,
handle_qmp_command()bypasses the queue.Anything else goes into the queue.
Quoted 8 lines
The shortest JSON values are 0, 1, ..., 9. A sequence of them needs to be separated by whitespace. N characters of input can therefore produce up to ceil(N/2) JSON values.
Input that makes the parser report one error per input character exists:
"}}}}}" produces one parse error for each '}'. I believe every parse error should consume at least one input character, but we'd have to double-check before we rely on it.
Aha. Let's check will it crash:
[root@kvm master]# ./build/qemu-system-x86_64 -nodefaults -nographic -S -qmp stdio
{"QMP": {"version": {"qemu": {"micro": 50, "minor": 2, "major": 5}, "package": "v5.2.0-2359-g0b9242f339-dirty"}, "capabilities": ["oob"]}} {'execute': 'qmp_capabilities'}
{"return": {}}
}}}
{"error": {"class": "GenericError", "desc": "JSON parse error, expecting value"}}
{"error": {"class": "GenericError", "desc": "JSON parse error, expecting value"}}
{"error": {"class": "GenericError", "desc": "JSON parse error, expecting value"}}
}}}}}}}}
{"error": {"class": "GenericError", "desc": "JSON parse error, expecting value"}}
{"error": {"class": "GenericError", "desc": "JSON parse error, expecting value"}}
{"error": {"class": "GenericError", "desc": "JSON parse error, expecting value"}}
{"error": {"class": "GenericError", "desc": "JSON parse error, expecting value"}}
{"error": {"class": "GenericError", "desc": "JSON parse error, expecting value"}}
{"error": {"class": "GenericError", "desc": "JSON parse error, expecting value"}}
{"error": {"class": "GenericError", "desc": "JSON parse error, expecting value"}}
{"error": {"class": "GenericError", "desc": "JSON parse error, expecting value"}}
}}}}}}}}}
qemu-system-x86_64: ../monitor/qmp.c:400: handle_qmp_command: Assertion `mon->qmp_requests->length < QMP_REQ_QUEUE_LEN_MAX' failed. Aborted (core dumped)
So, yes, we crash on 9 '}' brackets..
Quoted 34 lines
Quoted 34 lines
Quoted 32 lines
Quoted 19 lines
Quoted 18 lines
Quoted 9 lines
include/monitor/monitor.h +0
-0bool monitor_cur_is_qmp (void );monitor.c +0
-0monitor.c static int monitor_can_read(void *opaque) · line 4101
Quoted 6 lines
monitor.c +1
-1@@ -4097,7 +4097,7 @@ static int monitor_can_read(void *opaque) {Monitor *mon = opaque; -return !atomic_mb_read (&mon->suspend_cnt); +return !atomic_mb_read (&mon->suspend_cnt) ?4096 :0 ; }/* The ramifications are not obvious to me. I think I need to (re-)examine how QMP reads input, with special consideration to its OOB feature.
Quoted 4 lines
Yeh that was the bit that worried me; I also wondered what happens with
monitor_suspendand things like fd passing; enough to make it non-obvious to me.OK, I don't have answers..
Markus, David, could you please help? Or, what to do? We of course don't have enough expertise to prove that patch will not break any feature in the whole monitor subsystem.
I can say that it just works, and we live with it for years (and our customers too), and tests pass. Still, I don't think that we use OOB feature. I remember some problems with it, when RHEL version which we were based on included some OOB feature patches, but not some appropriate fixes.. But it was long ago.
If nobody can say that patch is wrong, maybe, we can just apply it? We'll have the whole release cycle to catch any bugs and revert the commit at any time. In this way we only have a question about
QMP_REQ_QUEUE_LEN_MAX, which is quite simple.
Quoted 6 lines
Quoted 3 lines
ping here, as a replacement for "[PATCH v3 0/5] Increase amount of data for monitor to read"
If no better idea, I'll make what I propose above (with two limits) at some good moment :)
Digest what I wrote above, then tell me how you'd like to proceed.
Ohh. Honestly, now I don't have time to dig into monitor code and prove that everything is good. It's OK for me to postpone it for some future time.
Signature · 2 lines
Best regards, Vladimir
Quoted 70 lines · Vladimir Sementsov-Ogievskiy
Quoted 47 lines · Markus Armbruster
Quoted 45 lines · Vladimir Sementsov-Ogievskiy
Quoted 44 lines · Vladimir Sementsov-Ogievskiy
Hi all!
This patch isn't outdated, it applies on master with a little conflict
atomic_mb_read->qatomic_mb_readWe have new series "[PATCH v2 0/2] Increase amount of data for monitor to read", but I do think that we've started from wrong point. And actually we should start from this old patch.
Quoted 36 lines · Dr. David Alan Gilbert
Quoted 35 lines · * Markus Armbruster ([email protected]) wrote:
Did this fall through the cracks?
Quoted 3 lines · Denis Plotnikov
Right now QMP and HMP monitors read 1 byte at a time from the socket, which is very inefficient. With 100+ VMs on the host this easily reasults in a lot of unnecessary system calls and CPU usage in the system.
Yes, reading one byte at a time is awful. But QMP is control plane; I didn't expect it to impact system performance. How are you using QMP? Just curious, not actually opposed to improving QMP efficiency.
Quoted 16 lines
This patch changes the amount of data to read to 4096 bytes, which matches buffer size on the channel level. Fortunately, monitor protocol is synchronous right now thus we should not face side effects in reality.
Signed-off-by Denis V. Lunev <[email protected]>Signed-off-by Denis Plotnikov <[email protected]>--- include/monitor/monitor.h | 2 +- monitor.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-)include/monitor/monitor.h +0
-0include/monitor/monitor.h extern __thread Monitor *cur_mon; · line 16
Quoted 4 lines
include/monitor/monitor.h +1
-1@@ -14,7 +14,7 @@ extern __thread Monitor *cur_mon;#define MONITOR_USE_CONTROL 0x04#define MONITOR_USE_PRETTY 0x08 -#define QMP_REQ_QUEUE_LEN_MAX 8 +#define QMP_REQ_QUEUE_LEN_MAX 4096This looks suspicious. It's a request count, not a byte count. Can you explain what led you to change it this way?
Quoted 5 lines
Quoted 3 lines
Quoted 3 lines
I can explain, because that was my idea:
It's a hack to not overflow the queue. With just the second hunk we overflow it and assertion fails.
I can't see offhand how that happens. Got a reproducer for me?
Yes:
[root@kvm master]# echo '{'execute': 'qmp_capabilities'}{'execute': 'query-block'}{'execute': 'query-block'}{'execute': 'query-block'}{'execute': 'query-block'}{'execute': 'query-block'}{'execute': 'query-block'}{'execute': 'query-block'}{'execute': 'query-block'}{'execute': 'query-block'}{'execute': 'query-block'}{'execute': 'query-block'}{'execute': 'query-block'}' | ./build/qemu-system-x86_64 -nodefaults -nographic -S -qmp stdio {"QMP": {"version": {"qemu": {"micro": 50, "minor": 2, "major": 5}, "package": "v5.2.0-2359-g0b9242f339-dirty"}, "capabilities": ["oob"]}}
qemu-system-x86_64:../monitor/qmp.c:400:handle_qmp_command: Assertion `mon->qmp_requests->length <QMP_REQ_QUEUE_LEN_MAX' failed.
Aborted (core dumped)[root@kvm master]# git diff
monitor/monitor.c +0
-0
monitor/monitor.c int monitor_can_read(void *opaque) · line 568
Quoted 8 lines
monitor/monitor.c +1
-1@@ -562,7 +562,7 @@ int monitor_can_read(void *opaque) {Monitor *mon = opaque; -return !qatomic_mb_read (&mon->suspend_cnt); +return !qatomic_mb_read (&mon->suspend_cnt) ?4096 :0 ; }void monitor_list_append (Monitor *mon)
Hmmm...
We always parse the everything we read.
We suspend the monitor when the request queue is full, and resume it has space.
When we read one character at a time, this suffices: when input is ready while the monitor is not suspended, we read one character, feed it to the parser, which produces at most one request. This request surely fits into the queue, because the queue is non-full (or else the monitor would be suspended).
When we read a sane buffer, suspending the monitor doesn't suffice. We need to suspend parsing, too. Feels feasible.
[...]
Quoted 31 lines
Quoted 31 lines
Quoted 31 lines
Quoted 29 lines
Quoted 16 lines
Quoted 7 lines
Quoted 7 lines
include/monitor/monitor.h +0
-0bool monitor_cur_is_qmp (void );monitor.c +0
-0@@ -4097,7 +4097,7 @@ static int monitor_can_read(void *opaque) {Quoted 8 lines
monitor.c static int monitor_can_read(void *opaque) · line 4101
Quoted 5 lines
monitor.c +1
-1Monitor *mon = opaque; -return !atomic_mb_read (&mon->suspend_cnt); +return !atomic_mb_read (&mon->suspend_cnt) ?4096 :0 ; }/* The ramifications are not obvious to me. I think I need to (re-)examine how QMP reads input, with special consideration to its OOB feature.
Quoted 4 lines
Yeh that was the bit that worried me; I also wondered what happens with
monitor_suspendand things like fd passing; enough to make it non-obvious to me.OK, I don't have answers..
Markus, David, could you please help? Or, what to do? We of course don't have enough expertise to prove that patch will not break any feature in the whole monitor subsystem.
I can say that it just works, and we live with it for years (and our customers too), and tests pass. Still, I don't think that we use OOB feature. I remember some problems with it, when RHEL version which we were based on included some OOB feature patches, but not some appropriate fixes.. But it was long ago.
If nobody can say that patch is wrong, maybe, we can just apply it? We'll have the whole release cycle to catch any bugs and revert the commit at any time. In this way we only have a question about
QMP_REQ_QUEUE_LEN_MAX, which is quite simple.
Quoted 8 lines
Quoted 6 lines
Quoted 3 lines
ping here, as a replacement for "[PATCH v3 0/5] Increase amount of data for monitor to read"
If no better idea, I'll make what I propose above (with two limits) at some good moment :)
Digest what I wrote above, then tell me how you'd like to proceed.
Ohh. Honestly, now I don't have time to dig into monitor code and prove that everything is good. It's OK for me to postpone it for some future time.
I don't require *proof*. I do need a bit more help than "this patch works for us".
Weak correctness arguments can sometimes be offset by good tests.
One obvious testing gap is receiving many commands in a single batch. The existing tests don't cover that, because they send one command after the other. Evicence: the crash discussed above.
How much effort you can contribute is of course entirely up to you.
Quoted 141 lines · Markus Armbruster
Quoted 70 lines · Vladimir Sementsov-Ogievskiy
Quoted 47 lines · Markus Armbruster
Quoted 45 lines · Vladimir Sementsov-Ogievskiy
Quoted 44 lines · Vladimir Sementsov-Ogievskiy
Hi all!
This patch isn't outdated, it applies on master with a little conflict
atomic_mb_read->qatomic_mb_readWe have new series "[PATCH v2 0/2] Increase amount of data for monitor to read", but I do think that we've started from wrong point. And actually we should start from this old patch.
Quoted 36 lines · Dr. David Alan Gilbert
Quoted 35 lines · * Markus Armbruster ([email protected]) wrote:
Did this fall through the cracks?
Quoted 3 lines · Denis Plotnikov
Right now QMP and HMP monitors read 1 byte at a time from the socket, which is very inefficient. With 100+ VMs on the host this easily reasults in a lot of unnecessary system calls and CPU usage in the system.
Yes, reading one byte at a time is awful. But QMP is control plane; I didn't expect it to impact system performance. How are you using QMP? Just curious, not actually opposed to improving QMP efficiency.
Quoted 16 lines
This patch changes the amount of data to read to 4096 bytes, which matches buffer size on the channel level. Fortunately, monitor protocol is synchronous right now thus we should not face side effects in reality.
Signed-off-by Denis V. Lunev <[email protected]>Signed-off-by Denis Plotnikov <[email protected]>--- include/monitor/monitor.h | 2 +- monitor.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-)include/monitor/monitor.h +0
-0include/monitor/monitor.h extern __thread Monitor *cur_mon; · line 16
Quoted 4 lines
include/monitor/monitor.h +1
-1@@ -14,7 +14,7 @@ extern __thread Monitor *cur_mon;#define MONITOR_USE_CONTROL 0x04#define MONITOR_USE_PRETTY 0x08 -#define QMP_REQ_QUEUE_LEN_MAX 8 +#define QMP_REQ_QUEUE_LEN_MAX 4096This looks suspicious. It's a request count, not a byte count. Can you explain what led you to change it this way?
Quoted 5 lines
Quoted 3 lines
Quoted 3 lines
I can explain, because that was my idea:
It's a hack to not overflow the queue. With just the second hunk we overflow it and assertion fails.
I can't see offhand how that happens. Got a reproducer for me?
Yes:
[root@kvm master]# echo '{'execute': 'qmp_capabilities'}{'execute': 'query-block'}{'execute': 'query-block'}{'execute': 'query-block'}{'execute': 'query-block'}{'execute': 'query-block'}{'execute': 'query-block'}{'execute': 'query-block'}{'execute': 'query-block'}{'execute': 'query-block'}{'execute': 'query-block'}{'execute': 'query-block'}{'execute': 'query-block'}' | ./build/qemu-system-x86_64 -nodefaults -nographic -S -qmp stdio {"QMP": {"version": {"qemu": {"micro": 50, "minor": 2, "major": 5}, "package": "v5.2.0-2359-g0b9242f339-dirty"}, "capabilities": ["oob"]}}
qemu-system-x86_64:../monitor/qmp.c:400:handle_qmp_command: Assertion `mon->qmp_requests->length <QMP_REQ_QUEUE_LEN_MAX' failed.
Aborted (core dumped)[root@kvm master]# git diff
monitor/monitor.c +0
-0monitor/monitor.c int monitor_can_read(void *opaque) · line 568
Quoted 8 lines
monitor/monitor.c +1
-1@@ -562,7 +562,7 @@ int monitor_can_read(void *opaque) {Monitor *mon = opaque; -return !qatomic_mb_read (&mon->suspend_cnt); +return !qatomic_mb_read (&mon->suspend_cnt) ?4096 :0 ; }void monitor_list_append (Monitor *mon)Hmmm...
We always parse the everything we read.
We suspend the monitor when the request queue is full, and resume it has space.
When we read one character at a time, this suffices: when input is ready while the monitor is not suspended, we read one character, feed it to the parser, which produces at most one request. This request surely fits into the queue, because the queue is non-full (or else the monitor would be suspended).
When we read a sane buffer, suspending the monitor doesn't suffice. We need to suspend parsing, too. Feels feasible.
[...]
Quoted 31 lines
Quoted 31 lines
Quoted 31 lines
Quoted 29 lines
Quoted 16 lines
Quoted 7 lines
Quoted 7 lines
include/monitor/monitor.h +0
-0bool monitor_cur_is_qmp (void );monitor.c +0
-0@@ -4097,7 +4097,7 @@ static int monitor_can_read(void *opaque) {Quoted 8 lines
monitor.c static int monitor_can_read(void *opaque) · line 4101
Quoted 5 lines
monitor.c +1
-1Monitor *mon = opaque; -return !atomic_mb_read (&mon->suspend_cnt); +return !atomic_mb_read (&mon->suspend_cnt) ?4096 :0 ; }/* The ramifications are not obvious to me. I think I need to (re-)examine how QMP reads input, with special consideration to its OOB feature.
Quoted 4 lines
Yeh that was the bit that worried me; I also wondered what happens with
monitor_suspendand things like fd passing; enough to make it non-obvious to me.OK, I don't have answers..
Markus, David, could you please help? Or, what to do? We of course don't have enough expertise to prove that patch will not break any feature in the whole monitor subsystem.
I can say that it just works, and we live with it for years (and our customers too), and tests pass. Still, I don't think that we use OOB feature. I remember some problems with it, when RHEL version which we were based on included some OOB feature patches, but not some appropriate fixes.. But it was long ago.
If nobody can say that patch is wrong, maybe, we can just apply it? We'll have the whole release cycle to catch any bugs and revert the commit at any time. In this way we only have a question about
QMP_REQ_QUEUE_LEN_MAX, which is quite simple.Quoted 8 lines
Quoted 6 lines
Quoted 3 lines
ping here, as a replacement for "[PATCH v3 0/5] Increase amount of data for monitor to read"
If no better idea, I'll make what I propose above (with two limits) at some good moment :)
Digest what I wrote above, then tell me how you'd like to proceed.
Ohh. Honestly, now I don't have time to dig into monitor code and prove that everything is good. It's OK for me to postpone it for some future time.
I don't require *proof*. I do need a bit more help than "this patch works for us".
Quoted 8 lines
Weak correctness arguments can sometimes be offset by good tests.
One obvious testing gap is receiving many commands in a single batch. The existing tests don't cover that, because they send one command after the other. Evicence: the crash discussed above.
How much effort you can contribute is of course entirely up to you.
Hmm. An idea. What we want: read more than one character at a time, as it's inefficient. May be instead of modifying monitor_can_read() and therefore influence monitor behavior in unpredictable way, we'd better add a separate read-cache, and just read through this cache?
Signature · 2 lines
Best regards, Vladimir
Quoted 4 lines · Vladimir Sementsov-Ogievskiy
Hmm. An idea. What we want: read more than one character at a time, as it's inefficient. May be instead of modifying
monitor_can_read()and therefore influence monitor behavior in unpredictable way, we'd better add a separate read-cache, and just read through this cache?
I think this idea is worth exploring.
With a classical parser structure, this would be trivial. Classical
structure: application gets expression tree from parser, parser gets tokens from lexer, lexer reads characters from the input. Just use a suitably buffered read.
We use a streaming structure, though: main loop reads and pushes characters to lexer one by one, lexer pushes tokens to parser one by one, parser pushes expression tree to the monitor application. All via callbacks.
Additional complication: flow control. The monitor can tell the main loop to stop / resume pushing. This is monitor_suspend(), monitor_resume(). It takes effect immediately.
We can make the read buffered, but we still have to ensure "stop pushing" takes effect immediately. Stupidest way that could possibly
work: keep pushing characters to the lexer one by one.
I think that's what you have in mind. Would be great if you could give it a try!