KVM: x86: nSVM: fixes for SYSENTER emulation
cover KVM: x86: nSVM: fixes for SYSENTER emulation
This is a result of deep rabbit hole dive in regard to why currently the nested migration of 32 bit guests is totally broken on AMD.
It turns out that due to slight differences between the original AMD64 implementation and the Intel's remake, SYSENTER instruction behaves a bit differently on Intel, and to support migration from Intel to AMD we try to emulate those differences away.
Sadly that collides with virtual vmload/vmsave feature that is used in nesting such as on migration (and otherwise when userspace
reads MSR_IA32_SYSENTER_EIP/MSR_IA32_SYSENTER_ESP), wrong value is returned, which leads to #DF in the nested guest when the wrong value is loaded back.
The patch I prepared carefully fixes this, by mostly disabling that SYSCALL emulation when we don't spoof Intel's vendor ID, and if we do, and yet somehow SVM is enabled (this is very rare corner case), then virtual vmload/save is force disabled.
Best regards,
Maxim Levitsky
Maxim Levitsky (2):
KVM: x86: add guest_cpuid_is_intel
KVM: nSVM: improve SYSENTER emulation on AMD
arch/x86/kvm/cpuid.h | 8 ++++ arch/x86/kvm/svm/svm.c | 97 ++++++++++++++++++++++++++++-------------- arch/x86/kvm/svm/svm.h | 7 +-- 3 files changed, 77 insertions(+), 35 deletions(-)
Signature · 1 line
2.26.2
PATCH 1/2 KVM: x86: add guest_cpuid_is_intel
This is similar to existing 'guest_cpuid_is_amd_or_hygon'
--- arch/x86/kvm/cpuid.h | 8 ++++++++ 1 file changed, 8 insertions(+)
arch/x86/kvm/cpuid.h +8 -0
@@ -248,6 +248,14 @@ static inline bool guest_cpuid_is_amd_or_hygon(struct kvm_vcpu *vcpu) is_guest_vendor_hygon(best->ebx, best->ecx, best->edx)); } +static inline bool guest_cpuid_is_intel (struct kvm_vcpu *vcpu) +{ +struct kvm_cpuid_entry2 *best; + + best =kvm_find_cpuid_entry (vcpu,0 ,0 ); +return best &&is_guest_vendor_intel (best->ebx, best->ecx, best->edx); +} +static inline int guest_cpuid_family (struct kvm_vcpu *vcpu) {struct kvm_cpuid_entry2 *best;
Signature · 1 line
2.26.2
PATCH 2/2 KVM: nSVM: improve SYSENTER emulation on AMD
In reply to Maxim LevitskyCurrently to support Intel->AMD migration, if CPU vendor is GenuineIntel, we emulate full 64 value for MSR_IA32_SYSENTER_EIP/MSR_IA32_SYSENTER_ESP msrs, and we also emulate sysenter/sysexit instruction in long mode.
(Emulator does still refuse to emulate sysenter in 64 bit mode, on the ground that the code for this wasn't tested and likely there are no users of this)
However when virtual vmload/vmsave is enabled, the vmload instruction will update these 32 bit msrs without triggering their msr intercept, which will lead to having stale values in our shadow copy of these msrs, which are in turn only updated when those msrs are intercepted.
Fix/optimize this by doing the following:
1. Enable the MSR intercepts for these MSRs iff vendor=GenuineIntel (This is both a tiny optimization and also will ensure that when guest cpu vendor is AMD, the msrs will be 32 bit wide as AMD defined).
2. Store only high 32 bit part of these msrs on interception and combine it with hardware msr value on intercepted read/writes iff vendor=GenuineIntel.
3. Disable vmload/vmsave virtualization if vendor=GenuineIntel. (It is somewhat insane to set vendor=GenuineIntel and still enable SVM for the guest but well whatever).
Then zero the high 32 bit parts when we intercept and emulate vmload. And since we now read the low 32 bit part from the VMCB, it will be correct.
Thanks a lot to Paulo Bonzini for helping me fix this in the most correct way.
This patch fixes nested migration of 32 bit nested guests which was broken due to incorrect cached values of these msrs being read if L1 changed these msrs with vmload prior to L2 entry.
--- arch/x86/kvm/svm/svm.c | 97 ++++++++++++++++++++++++++++-------------- arch/x86/kvm/svm/svm.h | 7 +-- 2 files changed, 69 insertions(+), 35 deletions(-)
arch/x86/kvm/svm/svm.c +65 -32
@@ -95,6 +95,8 @@ static const struct svm_direct_access_msrs { } direct_access_msrs[MAX_DIRECT_ACCESS_MSRS] = { { .index = MSR_STAR, .always = true }, { .index = MSR_IA32_SYSENTER_CS, .always = true }, + { .index = MSR_IA32_SYSENTER_EIP, .always = false }, + { .index = MSR_IA32_SYSENTER_ESP, .always = false }, #ifdef CONFIG_X86_64 { .index = MSR_GS_BASE, .always = true }, { .index = MSR_FS_BASE, .always = true },
@@ -1258,16 +1260,6 @@ static void init_vmcb(struct kvm_vcpu *vcpu)if (kvm_vcpu_apicv_active (vcpu))avic_init_vmcb (svm); -/* -* If hardware supports Virtual VMLOAD VMSAVE then enable it -* in VMCB and clear intercepts to avoid #VMEXIT. -*/ -if (vls) { -svm_clr_intercept (svm,INTERCEPT_VMLOAD ); -svm_clr_intercept (svm,INTERCEPT_VMSAVE ); - svm->vmcb->control.virt_ext |=VIRTUAL_VMLOAD_VMSAVE_ENABLE_MASK ; - } -if (vgif) {svm_clr_intercept (svm,INTERCEPT_STGI );svm_clr_intercept (svm,INTERCEPT_CLGI );
@@ -2133,9 +2125,11 @@ static int vmload_vmsave_interception(struct kvm_vcpu *vcpu, bool vmload) ret =kvm_skip_emulated_instruction (vcpu); -if (vmload) +if (vmload) {nested_svm_vmloadsave (vmcb12, svm->vmcb); -else + svm->sysenter_eip_hi =0 ; + svm->sysenter_esp_hi =0 ; + }else nested_svm_vmloadsave (svm->vmcb, vmcb12);kvm_vcpu_unmap (vcpu, &map, true);
@@ -2676,11 +2670,18 @@ static int svm_get_msr(struct kvm_vcpu *vcpu, struct msr_data *msr_info)case MSR_IA32_SYSENTER_CS : msr_info->data = svm->vmcb01.ptr->save.sysenter_cs;break ; +case MSR_IA32_SYSENTER_EIP : - msr_info->data = svm->sysenter_eip; + msr_info->data = (u32 )svm->vmcb01.ptr->save.sysenter_eip; +if (guest_cpuid_is_intel (vcpu)) + msr_info->data |= (u64 )svm->sysenter_eip_hi <<32 ; +break ;case MSR_IA32_SYSENTER_ESP : - msr_info->data = svm->sysenter_esp; + msr_info->data = svm->vmcb01.ptr->save.sysenter_esp; +if (guest_cpuid_is_intel (vcpu)) + msr_info->data |= (u64 )svm->sysenter_esp_hi <<32 ; +break ;case MSR_TSC_AUX :if (!boot_cpu_has (X86_FEATURE_RDTSCP ))
@@ -2885,12 +2886,20 @@ static int svm_set_msr(struct kvm_vcpu *vcpu, struct msr_data *msr) svm->vmcb01.ptr->save.sysenter_cs = data;break ;case MSR_IA32_SYSENTER_EIP : - svm->sysenter_eip = data; - svm->vmcb01.ptr->save.sysenter_eip = data; + svm->vmcb01.ptr->save.sysenter_eip = (u32 )data; +/* +* We only intercept the MSR_IA32_SYSENTER_{EIP|ESP} msrs +* when we spoof an Intel vendor ID (for cross vendor migration). +* In this case we use this intercept to track the high +* 32 bit part of these msrs to support Intel's +* implementation of SYSENTER/SYSEXIT. +*/ + svm->sysenter_eip_hi =guest_cpuid_is_intel (vcpu) ? (data >>32 ) :0 ; +break ;case MSR_IA32_SYSENTER_ESP : - svm->sysenter_esp = data; - svm->vmcb01.ptr->save.sysenter_esp = data; + svm->vmcb01.ptr->save.sysenter_esp = (u32 )data; + svm->sysenter_esp_hi =guest_cpuid_is_intel (vcpu) ? (data >>32 ) :0 ;break ;case MSR_TSC_AUX :if (!boot_cpu_has (X86_FEATURE_RDTSCP ))
@@ -4009,24 +4018,48 @@ static void svm_vcpu_after_set_cpuid(struct kvm_vcpu *vcpu) vcpu->arch.reserved_gpa_bits &= ~(1UL << (best->ebx &0x3f )); } -if (!kvm_vcpu_apicv_active (vcpu)) -return ; +if (kvm_vcpu_apicv_active (vcpu)) { +/* +* AVIC does not work with an x2APIC mode guest. If the X2APIC feature +* is exposed to the guest, disable AVIC. +*/ +if (guest_cpuid_has (vcpu,X86_FEATURE_X2APIC )) +kvm_request_apicv_update (vcpu->kvm, false, +APICV_INHIBIT_REASON_X2APIC ); -/* -* AVIC does not work with an x2APIC mode guest. If the X2APIC feature -* is exposed to the guest, disable AVIC. -*/ -if (guest_cpuid_has (vcpu,X86_FEATURE_X2APIC )) -kvm_request_apicv_update (vcpu->kvm, false, -APICV_INHIBIT_REASON_X2APIC ); +/* +* Currently, AVIC does not work with nested virtualization. +* So, we disable AVIC when cpuid for SVM is set in the L1 guest. +*/ +if (nested &&guest_cpuid_has (vcpu,X86_FEATURE_SVM )) +kvm_request_apicv_update (vcpu->kvm, false, +APICV_INHIBIT_REASON_NESTED ); + }/* -* Currently, AVIC does not work with nested virtualization. -* So, we disable AVIC when cpuid for SVM is set in the L1 guest. +* If we are emulating an Intel CPU we need to intercept +* MSR_IA32_SYSENTER_EIP/MSR_IA32_SYSENTER_RSP to know their +* full 64 bit values since on AMD these are 32 bit. +* +* Also we have to enable VMLOAD interception to not allow it +* to overwrite these MSRs withouth KVM knowing (msr intercept +* doesn't affect VMLOAD) +* */ -if (nested &&guest_cpuid_has (vcpu,X86_FEATURE_SVM )) -kvm_request_apicv_update (vcpu->kvm, false, -APICV_INHIBIT_REASON_NESTED ); +if (!guest_cpuid_is_intel (vcpu)) { +/* +* If hardware supports Virtual VMLOAD VMSAVE then enable it +* in VMCB and clear intercepts to avoid #VMEXIT. +*/ +if (vls) { +svm_clr_intercept (svm,INTERCEPT_VMLOAD ); +svm_clr_intercept (svm,INTERCEPT_VMSAVE ); + svm->vmcb->control.virt_ext |=VIRTUAL_VMLOAD_VMSAVE_ENABLE_MASK ; + } +/* No need to intercept these msrs either */ +set_msr_interception (vcpu, svm->msrpm,MSR_IA32_SYSENTER_EIP ,1 ,1 ); +set_msr_interception (vcpu, svm->msrpm,MSR_IA32_SYSENTER_ESP ,1 ,1 ); + } }static bool svm_has_wbinvd_exit (void )
arch/x86/kvm/svm/svm.h +4 -3
@@ -28,7 +28,7 @@ static const u32 host_save_user_msrs[] = { };#define NR_HOST_SAVE_USER_MSRS ARRAY_SIZE(host_save_user_msrs) -#define MAX_DIRECT_ACCESS_MSRS 18 +#define MAX_DIRECT_ACCESS_MSRS 20#define MSRPM_OFFSETS 16extern u32 msrpm_offsets[MSRPM_OFFSETS ]__read_mostly ;extern bool npt_enabled;
@@ -116,8 +116,9 @@ struct vcpu_svm {struct kvm_vmcb_info *current_vmcb;struct svm_cpu_data *svm_data;u32 asid; -uint64_t sysenter_esp; -uint64_t sysenter_eip; +u32 sysenter_esp_hi; +u32 sysenter_eip_hi; +uint64_t tsc_aux;u64 msr_decfg;
Signature · 1 line
2.26.2
Paolo Bonzini
maintainerRe: [PATCH 2/2] KVM: nSVM: improve SYSENTER emulation on AMD
Quoted 4 lines · Maxim Levitsky
arch/x86/kvm/svm/svm.c +4
-0+if (!guest_cpuid_is_intel (vcpu)) { +/* +* If hardware supports Virtual VMLOAD VMSAVE then enable it +* in VMCB and clear intercepts to avoid #VMEXIT.
arch/x86/kvm/svm/svm.c static void svm_vcpu_after_set_cpuid(struct kvm_vcpu *vcpu) · line 4062
Quoted 10 lines
arch/x86/kvm/svm/svm.c +10
-0+*/ +if (vls) { +svm_clr_intercept (svm,INTERCEPT_VMLOAD ); +svm_clr_intercept (svm,INTERCEPT_VMSAVE ); + svm->vmcb->control.virt_ext |=VIRTUAL_VMLOAD_VMSAVE_ENABLE_MASK ; + } +/* No need to intercept these msrs either */ +set_msr_interception (vcpu, svm->msrpm,MSR_IA32_SYSENTER_EIP ,1 ,1 ); +set_msr_interception (vcpu, svm->msrpm,MSR_IA32_SYSENTER_ESP ,1 ,1 ); + }
An "else" is needed here to do the opposite setup (removing the "if (vls)" from init_vmcb).
This also makes the code more readable since you can write
if (guest_cpuid_is_intel(vcpu)) {
/*
* We must intercept SYSENTER_EIP and SYSENTER_ESP
* accesses because the processor only stores 32 bits.
* For the same reason we cannot use virtual
* VMLOAD/VMSAVE.
*/
...
} else {
/* Do the opposite. */
...
}Paolo
Re: [PATCH 2/2] KVM: nSVM: improve SYSENTER emulation on AMD
Quoted 10 lines · Paolo Bonzini
Quoted 9 lines · Maxim Levitsky
arch/x86/kvm/svm/svm.c +9
-0+if (!guest_cpuid_is_intel (vcpu)) { +/* +* If hardware supports Virtual VMLOAD VMSAVE then enable it +* in VMCB and clear intercepts to avoid #VMEXIT. +*/ +if (vls) { +svm_clr_intercept (svm,INTERCEPT_VMLOAD ); +svm_clr_intercept (svm,INTERCEPT_VMSAVE ); + svm->vmcb->control.virt_ext |=VIRTUAL_VMLOAD_VMSAVE_ENABLE_MASK ;
Quoted 8 lines
arch/x86/kvm/svm/svm.c static void svm_vcpu_after_set_cpuid(struct kvm_vcpu *vcpu) · line 4062
Quoted 5 lines
arch/x86/kvm/svm/svm.c +5
-0+ } +/* No need to intercept these msrs either */ +set_msr_interception (vcpu, svm->msrpm,MSR_IA32_SYSENTER_EIP ,1 ,1 ); +set_msr_interception (vcpu, svm->msrpm,MSR_IA32_SYSENTER_ESP ,1 ,1 ); + }An "else" is needed here to do the opposite setup (removing the "if (vls)" from
init_vmcb).
init_vmcb currently set the INTERCEPT_VMLOAD and INTERCEPT_VMSAVE and it doesn't enable vls thus there is nothing to do if I don't want to enable vls.
It seems reasonable to me.
Both msrs I marked as '.always = false' in the
'direct_access_msrs', which makes them be intercepted by the default.
If I were to use '.always = true' it would feel a bit wrong as the intercept is not always enabled.
What do you think?
Quoted 15 lines
This also makes the code more readable since you can write
if (guest_cpuid_is_intel(vcpu)) { /* * We must intercept SYSENTER_EIP and SYSENTER_ESP * accesses because the processor only stores 32 bits. * For the same reason we cannot use virtual * VMLOAD/VMSAVE. */ ... } else { /* Do the opposite. */ ... }
Best regards,
Maxim Levitsky
Quoted 3 lines
Paolo
Paolo Bonzini
maintainerRe: [PATCH 2/2] KVM: nSVM: improve SYSENTER emulation on AMD
Quoted 20 lines · Maxim Levitsky
Quoted 10 lines · Paolo Bonzini
Quoted 9 lines · Maxim Levitsky
arch/x86/kvm/svm/svm.c +9
-0+if (!guest_cpuid_is_intel (vcpu)) { +/* +* If hardware supports Virtual VMLOAD VMSAVE then enable it +* in VMCB and clear intercepts to avoid #VMEXIT. +*/ +if (vls) { +svm_clr_intercept (svm,INTERCEPT_VMLOAD ); +svm_clr_intercept (svm,INTERCEPT_VMSAVE ); + svm->vmcb->control.virt_ext |=VIRTUAL_VMLOAD_VMSAVE_ENABLE_MASK ;Quoted 8 lines
arch/x86/kvm/svm/svm.c static void svm_vcpu_after_set_cpuid(struct kvm_vcpu *vcpu) · line 4062
Quoted 5 lines
arch/x86/kvm/svm/svm.c +5
-0+ } +/* No need to intercept these msrs either */ +set_msr_interception (vcpu, svm->msrpm,MSR_IA32_SYSENTER_EIP ,1 ,1 ); +set_msr_interception (vcpu, svm->msrpm,MSR_IA32_SYSENTER_ESP ,1 ,1 ); + }An "else" is needed here to do the opposite setup (removing the "if (vls)" from
init_vmcb).
Quoted 1 line
init_vmcbcurrently set theINTERCEPT_VMLOADandINTERCEPT_VMSAVEand it doesn't enable vls
There's also this towards the end of the function:
/*
* If hardware supports Virtual VMLOAD VMSAVE then enable it
* in VMCB and clear intercepts to avoid #VMEXIT.
*/
if (vls) {
svm_clr_intercept(svm, INTERCEPT_VMLOAD);
svm_clr_intercept(svm, INTERCEPT_VMSAVE);
svm->vmcb->control.virt_ext |=
VIRTUAL_VMLOAD_VMSAVE_ENABLE_MASK;
}Quoted 7 lines
thus there is nothing to do if I don't want to enable vls. It seems reasonable to me.
Both msrs I marked as '.always = false' in the
'direct_access_msrs', which makes them be intercepted by the default.
If I were to use '.always = true' it would feel a bit wrong as the intercept is not always enabled.
I agree that .always = false is correct.
Quoted 1 line
What do you think?
You can set the CPUID multiple times, so you could go from AMD to Intel and back.
Thanks,
Paolo
Re: [PATCH 2/2] KVM: nSVM: improve SYSENTER emulation on AMD
Quoted 44 lines · Paolo Bonzini
Quoted 20 lines · Maxim Levitsky
Quoted 10 lines · Paolo Bonzini
Quoted 9 lines · Maxim Levitsky
arch/x86/kvm/svm/svm.c +9
-0+if (!guest_cpuid_is_intel (vcpu)) { +/* +* If hardware supports Virtual VMLOAD VMSAVE then enable it +* in VMCB and clear intercepts to avoid #VMEXIT. +*/ +if (vls) { +svm_clr_intercept (svm,INTERCEPT_VMLOAD ); +svm_clr_intercept (svm,INTERCEPT_VMSAVE ); + svm->vmcb->control.virt_ext |=VIRTUAL_VMLOAD_VMSAVE_ENABLE_MASK ;Quoted 8 lines
arch/x86/kvm/svm/svm.c static void svm_vcpu_after_set_cpuid(struct kvm_vcpu *vcpu) · line 4062
Quoted 5 lines
arch/x86/kvm/svm/svm.c +5
-0+ } +/* No need to intercept these msrs either */ +set_msr_interception (vcpu, svm->msrpm,MSR_IA32_SYSENTER_EIP ,1 ,1 ); +set_msr_interception (vcpu, svm->msrpm,MSR_IA32_SYSENTER_ESP ,1 ,1 ); + }An "else" is needed here to do the opposite setup (removing the "if (vls)" from
init_vmcb).Quoted 1 line
init_vmcbcurrently set theINTERCEPT_VMLOADandINTERCEPT_VMSAVEand it doesn't enable vlsThere's also this towards the end of the function:
/* * If hardware supports Virtual VMLOAD VMSAVE then enable it * in VMCB and clear intercepts to avoid #VMEXIT. */ if (vls) { svm_clr_intercept(svm, INTERCEPT_VMLOAD); svm_clr_intercept(svm, INTERCEPT_VMSAVE); svm->vmcb->control.virt_ext |= VIRTUAL_VMLOAD_VMSAVE_ENABLE_MASK; }Quoted 7 lines
thus there is nothing to do if I don't want to enable vls. It seems reasonable to me.
Both msrs I marked as '.always = false' in the
'direct_access_msrs', which makes them be intercepted by the default.
If I were to use '.always = true' it would feel a bit wrong as the intercept is not always enabled.
Quoted 6 lines
I agree that .always = false is correct.
Quoted 1 line
What do you think?
You can set the CPUID multiple times, so you could go from AMD to Intel and back.
I understand now, I will send V2 with that. Thanks for the review!
Best regards,
Maxim Levitsky
Quoted 5 lines
Thanks,
Paolo