dt-bindings: arm: fsl: Document Compulab IOT-GATE-iMX8
Subsystems (2)
Fabio Estevam
reviewerPATCH v2 1/2 dt-bindings: arm: fsl: Document Compulab IOT-GATE-iMX8
From: Fabio Estevam <[email protected]>
Document Compulab's IOT-GATE-iMX8 board, which is based on Compulab's UCM-iMX8M-Mini SoM.
Board URL:
https://www.compulab.com/products/iot-gateways/iot-gate-imx8-industrial-arm-iot-gateway/
---
Changes since v1:
- Removed tabs.
Documentation/devicetree/bindings/arm/fsl.yaml | 7 +++++++ 1 file changed, 7 insertions(+)
Documentation/devicetree/bindings/arm/fsl.yaml +7 -0
@@ -946,6 +946,13 @@ properties: - prt,prt8mm # i.MX8MM Protonic PRT8MM Board - const: fsl,imx8mm + - description: Compulab i.MX8MM UCM SoM based boards + items: + - enum: + - compulab,imx8mm-iot-gateway # i.MX8MM Compulab IoT-Gateway + - const: compulab,imx8mm-ucm-som # i.MX8MM Compulab UCM SoM + - const: fsl,imx8mm + - description: Emtop i.MX8MM based Boards items: - const: ees,imx8mm-emtop-baseboard # i.MX8MM Emtop SoM on i.MX8M Mini Baseboard V1
Signature · 1 line
2.34.1
Fabio Estevam
reviewerPATCH v2 2/2 arm64: dts: imx8mm-iot-gateway: Add initial support
From: Fabio Estevam <[email protected]>
Add the initial support for the CompuLab i.MX8MM IoT Gateway board, which is based on the Compulab's UCM-iMX8M-Mini SoM.
Board URL:
https://www.compulab.com/products/iot-gateways/iot-gate-imx8-industrial-arm-iot-gateway/
---
Changes since v1:
- None.
arch/arm64/boot/dts/freescale/Makefile | 1 + .../boot/dts/freescale/imx8mm-iot-gateway.dts | 222 ++++++ .../boot/dts/freescale/imx8mm-ucm-som.dtsi | 680 ++++++++++++++++++ 3 files changed, 903 insertions(+) create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-iot-gateway.dts create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-ucm-som.dtsi
arch/arm64/boot/dts/freescale/Makefile +1 -0
@@ -114,6 +114,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mm-evk.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-evkb.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-icore-mx8mm-ctouch2.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-icore-mx8mm-edimm2.2.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mm-iot-gateway.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-innocomm-wb15-evk.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-kontron-bl.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-kontron-bl-osm-s.dtb
arch/arm64/boot/dts/freescale/imx8mm-iot-gateway.dts new file +222 -0
222 lines not on this page · raw message
arch/arm64/boot/dts/freescale/imx8mm-ucm-som.dtsi new file +680 -0
680 lines not on this page · raw message
Signature · 1 line
2.34.1
Re: [PATCH v2 2/2] arm64: dts: imx8mm-iot-gateway: Add initial support
Quoted 10 lines · Fabio Estevam
From: Fabio Estevam <[email protected]>
Add the initial support for the CompuLab i.MX8MM IoT Gateway board, which is based on the Compulab's UCM-iMX8M-Mini SoM.
Board URL:
https://www.compulab.com/products/iot-gateways/iot-gate-imx8-industrial-arm-iot-gateway/arch/arm64/boot/dts/freescale/imx8mm-iot-gateway.dts new file +1
-0+ regulator-usdhc2_v {
arch/arm64/boot/dts/freescale/imx8mm-iot-gateway.dts line 80
Quoted 10 lines
arch/arm64/boot/dts/freescale/imx8mm-iot-gateway.dts new file +10
-0+ compatible = "regulator-fixed"; + regulator-name = "usdhc2_v"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio1 4 GPIO_ACTIVE_HIGH>; + regulator-always-on; + enable-active-high; + }; + + regulator-mpcie2_rst {
No underscores in node names.
Quoted 70 lines
arch/arm64/boot/dts/freescale/imx8mm-iot-gateway.dts new file +70
-0+ compatible = "regulator-fixed"; + regulator-name = "mpcie2_rst"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; + regulator-always-on; + enable-active-high; + }; + + regulator-mpcie2lora_dis { + compatible = "regulator-fixed"; + regulator-name = "mpcie2lora_dis"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio3 21 GPIO_ACTIVE_HIGH>; + regulator-always-on; + enable-active-high; + }; + + pcie0_refclk: pcie0-refclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <100000000>; + }; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + eeprom@54 { + compatible = "atmel,24c08"; + reg = <0x54>; + pagesize = <16>; + }; +}; + +&ecspi1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1 &pinctrl_ecspi1_cs>; + cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&pcie_phy { + fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>; + fsl,tx-deemph-gen1 = <0x2d>; + fsl,tx-deemph-gen2 = <0xf>; + fsl,clkreq-unsupported; + clocks = <&pcie0_refclk>; + clock-names = "ref"; + status = "okay"; +}; + +&pcie0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie0>; + reset-gpio = <&gpio3 20 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&usbotg1 { + dr_mode = "host"; + status = "okay"; +}; + +&usbotg2 { + #address-cells = <1>;
arch/arm64/boot/dts/freescale/imx8mm-iot-gateway.dts line 160
Quoted 10 lines
arch/arm64/boot/dts/freescale/imx8mm-iot-gateway.dts new file +10
-0+ #size-cells = <0>; + dr_mode = "host"; + usb-role-switch; + status = "okay"; + + usbhub@1 { + compatible = "usb424,9514"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb9514>; + reg = <1>;
reg is always the second property.
...
Quoted 7 lines
arch/arm64/boot/dts/freescale/imx8mm-ucm-som.dtsi new file +7
-0+ + backlight { + compatible = "pwm-backlight"; + pwms = <&pwm2 0 3000000 0>; + brightness-levels = <0 255>; + num-interpolated-steps = <255>; + default-brightness-level = <222>;
arch/arm64/boot/dts/freescale/imx8mm-ucm-som.dtsi line 35
Quoted 10 lines
arch/arm64/boot/dts/freescale/imx8mm-ucm-som.dtsi new file +10
-0+ status = "okay"; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_led>; + + heartbeat-led { + label = "Heartbeat";
Use function and color instead
arch/arm64/boot/dts/freescale/imx8mm-ucm-som.dtsi line 40
Quoted 5 lines
arch/arm64/boot/dts/freescale/imx8mm-ucm-som.dtsi new file +5
-0+ gpios = <&gpio1 12 GPIO_ACTIVE_LOW>; + linux,default-trigger = "heartbeat"; + }; + }; +
Best regards,
Krzysztof
Quoted 8 lines · Fabio Estevam
From: Fabio Estevam <[email protected]>
Document Compulab's IOT-GATE-iMX8 board, which is based on Compulab's UCM-iMX8M-Mini SoM.
Board URL:
https://www.compulab.com/products/iot-gateways/iot-gate-imx8-industrial-arm-iot-gateway/
Best regards,
Krzysztof