board: qualcomm: dragonboard820c: udpate readme
Subsystems (3)
PATCH 1/5 board: qualcomm: dragonboard820c: udpate readme
Update build instructions.
--- board/qualcomm/dragonboard820c/readme.txt | 47 ++++++++++------------- 1 file changed, 21 insertions(+), 26 deletions(-)
board/qualcomm/dragonboard820c/readme.txt +21 -26
@@ -16,10 +16,7 @@ Build & Run instructions ================================================================================ -1) Install mkbootimg and dtbTool from Codeaurora: - - git://codeaurora.org/quic/kernel/skales - commit 8492547e404e969262d9070dee9bdd15668bb70f worked for me. +1) Install mkbootimg 2) Setup CROSS_COMPILE to aarch64 compiler or if you use ccache just do CROSS_COMPILE="ccache aarch64-linux-gnu-"
@@ -33,15 +30,15 @@ $ touch rd -5) Generate qualcomm device tree table with dtbTool +5) Append the dtb to the u-boot binary discarding the internal dtb. - $ dtbTool -o dt.img arch/arm/dts + $ gzip u-boot-nodtb.bin + $ cat u-boot.dtb >> u-boot-nodtb.bin.gz 6) Generate Android boot image with mkbootimg: - $ mkbootimg --kernel=u-boot-dtb.bin \ + $ mkbootimg --kernel=u-boot-nodtb.bin.gz \ --output=u-boot.img \ - --dt=dt.img \ --pagesize 4096 \ --base 0x80000000 \ --ramdisk=rd \
@@ -251,44 +248,42 @@ Wait for 5 seconds before proceeding [5300] booting linux @ 0x80080000, ramdisk @ 0x82200000 (0), tags/device tree @ 0x82000000 [5310] Jumping to kernel via monitor -U-Boot 2017.11-00145-ge895117 (Nov 29 2017 - 10:04:06 +0100) +U-Boot 2025.04-rc5-00020-g40a61ca0e7eb-dirty (Apr 07 2025 - 09:37:03 +0200) Qualcomm-DragonBoard 820C -DRAM: 3 GiB -PSCI: v1.0 -MMC: sdhci@74a4900: 0 +DRAM: 3.5 GiB (effective 3 GiB) +Core: 136 devices, 18 uclasses, devicetree: board +MMC: Bulk clocks not available (-19), trying core clock +mmc@74a4900: 0 +Loading Environment from EXT4... OK In: serial@75b0000 Out: serial@75b0000 Err: serial@75b0000 -Net: Net Initialization Skipped -No ethernet found. +Net: No ethernet found. Hit any key to stop autoboot: 0 switch to partitions #0, OK mmc0 is current device Scanning mmc 0:1... Found /extlinux/extlinux.conf Retrieving file: /extlinux/extlinux.conf -433 bytes read in 71 ms (5.9 KiB/s) 1: nfs root - +Enter choice: 1: nfs root Retrieving file: /uImage -19397184 bytes read in 2024 ms (9.1 MiB/s) -append: root=/dev/nfs rw nfsroot=192.168.1.2:/db820c/rootfs,v3,tcp rootwait ip=dhcp consoleblank=0 console=tty0 console=ttyMSM0,115200n8 earlyprintk earlycon=msm_serial_dm,0x75b0000 androidboot.bootdevice=624000.ufshc androidboot.verifiedbootstate=orange androidboot.ver0 - +append: root=/dev/nfs rw nfsroot=192.168.1.6:/home/jramirez/Src/qualcomm-lt/db820c/rootfs,v3,tcp rootwait ip=dhcp consoleblank=0 console=tty0 console=ttyMSM0,115200n8 earlyprintk earlyco0 Retrieving file: /apq8096-db820c.dtb -38134 bytes read in 37 ms (1005.9 KiB/s) - -## Booting kernel from Legacy Image at 95000000 ... +## Booting kernel from Legacy Image at 155000000 ... Image Name: Dragonboard820c Image Type: AArch64 Linux Kernel Image (uncompressed) Data Size: 19397120 Bytes = 18.5 MiB Load Address: 80080000 Entry Point: 80080000 Verifying Checksum ... OK -## Flattened Device Tree blob at 93000000 - Booting using the fdt blob at 0x93000000 - Loading Kernel Image ... OK - Using Device Tree in place at 0000000093000000, end 000000009300c4f5 +## Flattened Device Tree blob at 148600000 + Booting using the fdt blob at 0x148600000 +Working FDT set to 148600000 + Loading Kernel Image to 80080000 + Using Device Tree in place at 0000000148600000, end 000000014860c4f5 +Working FDT set to 148600000 Starting kernel ...
Signature · 1 line
2.34.1
PATCH 2/5 clk/qcom: apq8096: fix set rate for the uart clock
The function should return a valid rate.
--- drivers/clk/qcom/clock-apq8096.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/clk/qcom/clock-apq8096.c +2 -1
@@ -87,7 +87,8 @@ static ulong apq8096_clk_set_rate(struct clk *clk, ulong rate)return clk_init_sdc (priv, rate);break ;case GCC_BLSP2_UART2_APPS_CLK :/*UART2*/ -return clk_init_uart (priv); +clk_init_uart (priv); +return 7372800 ;default :return 0 ; }
Signature · 1 line
2.34.1
Re: [PATCH 2/5] clk/qcom: apq8096: fix set rate for the uart clock
Quoted 4 lines · Jorge Ramirez-Ortiz
The function should return a valid rate.
Signed-off-by Jorge Ramirez-Ortiz <[email protected]>Reviewed-by Neil Armstrong <[email protected]>
Quoted 17 lines
drivers/clk/qcom/clock-apq8096.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)drivers/clk/qcom/clock-apq8096.c +2
-1@@ -87,7 +87,8 @@ static ulong apq8096_clk_set_rate(struct clk *clk, ulong rate)return clk_init_sdc (priv, rate);break ;case GCC_BLSP2_UART2_APPS_CLK :/*UART2*/ -return clk_init_uart (priv); +clk_init_uart (priv); +return 7372800 ;default :return 0 ; }
Signature · 1 line
Caleb (they/them)
PATCH 3/5 clk/qcom: apq8096: fix the sdhci clock
In reply to Jorge Ramirez-OrtizSelect the right clock for sdhci.
--- drivers/clk/qcom/clock-apq8096.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/clk/qcom/clock-apq8096.c +1 -1
@@ -83,7 +83,7 @@ static ulong apq8096_clk_set_rate(struct clk *clk, ulong rate)struct msm_clk_priv *priv =dev_get_priv (clk->dev);switch (clk->id) { -case GCC_SDCC1_APPS_CLK :/* SDC1 */ +case GCC_SDCC2_APPS_CLK :/* SDC2 */ return clk_init_sdc (priv, rate);break ;case GCC_BLSP2_UART2_APPS_CLK :/*UART2*/
Signature · 1 line
2.34.1
Re: [PATCH 3/5] clk/qcom: apq8096: fix the sdhci clock
Quoted 13 lines · Jorge Ramirez-Ortiz
Select the right clock for sdhci.
Signed-off-by Jorge Ramirez-Ortiz <[email protected]>Reviewed-by Neil Armstrong <[email protected]>--- drivers/clk/qcom/clock-apq8096.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)drivers/clk/qcom/clock-apq8096.c +0
-0
drivers/clk/qcom/clock-apq8096.c static ulong apq8096_clk_set_rate(struct clk *clk, ulong rate) · line 86
Quoted 5 lines
drivers/clk/qcom/clock-apq8096.c +1
-1@@ -83,7 +83,7 @@ static ulong apq8096_clk_set_rate(struct clk *clk, ulong rate)struct msm_clk_priv *priv =dev_get_priv (clk->dev);switch (clk->id) { -case GCC_SDCC1_APPS_CLK :/* SDC1 */ +case GCC_SDCC2_APPS_CLK :/* SDC2 */
Should be GCC_SDCC2_AHB_CLK
Quoted 3 lines
drivers/clk/qcom/clock-apq8096.c +0
-0return clk_init_sdc (priv, rate);break ;case GCC_BLSP2_UART2_APPS_CLK :/*UART2*/
Re: [PATCH 3/5] clk/qcom: apq8096: fix the sdhci clock
Quoted 9 lines · On 07/04/25 14:36:51, [email protected] wrote:
Quoted 8 lines · Jorge Ramirez-Ortiz
Select the right clock for sdhci.
Signed-off-by Jorge Ramirez-Ortiz <[email protected]>Reviewed-by Neil Armstrong <[email protected]>--- drivers/clk/qcom/clock-apq8096.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
Quoted 11 lines
drivers/clk/qcom/clock-apq8096.c static ulong apq8096_clk_set_rate(struct clk *clk, ulong rate) · line 85
Quoted 9 lines
drivers/clk/qcom/clock-apq8096.c +1
-1@@ -83,7 +83,7 @@ static ulong apq8096_clk_set_rate(struct clk *clk, ulong rate)struct msm_clk_priv *priv =dev_get_priv (clk->dev);switch (clk->id) { -case GCC_SDCC1_APPS_CLK :/* SDC1 */ +case GCC_SDCC2_APPS_CLK :/* SDC2 */ Should be
GCC_SDCC2_AHB_CLK
why? also if I do that, mcc fails to probe
Quoted 5 lines
Quoted 4 lines
drivers/clk/qcom/clock-apq8096.c +0
-0return clk_init_sdc (priv, rate);break ;case GCC_BLSP2_UART2_APPS_CLK :/*UART2*/
Caleb Connolly
Reviewed-byRe: [PATCH 3/5] clk/qcom: apq8096: fix the sdhci clock
Quoted 22 lines · Jorge Ramirez
Quoted 9 lines · On 07/04/25 14:36:51, [email protected] wrote:
Quoted 8 lines · Jorge Ramirez-Ortiz
Select the right clock for sdhci.
Signed-off-by Jorge Ramirez-Ortiz <[email protected]>Reviewed-by Neil Armstrong <[email protected]>--- drivers/clk/qcom/clock-apq8096.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)Quoted 11 lines
drivers/clk/qcom/clock-apq8096.c static ulong apq8096_clk_set_rate(struct clk *clk, ulong rate) · line 85
Quoted 9 lines
drivers/clk/qcom/clock-apq8096.c +1
-1@@ -83,7 +83,7 @@ static ulong apq8096_clk_set_rate(struct clk *clk, ulong rate)struct msm_clk_priv *priv =dev_get_priv (clk->dev);switch (clk->id) { -case GCC_SDCC1_APPS_CLK :/* SDC1 */ +case GCC_SDCC2_APPS_CLK :/* SDC2 */ Should be
GCC_SDCC2_AHB_CLK
Quoted 1 line
why? also if I do that, mcc fails to probe
GCC_SDCC2_APPS_CLK is correct, that's the "core" clock and the one the sdhci_msm driver calls clk_set_rate() on. So this patch is good. I suspect the misuse of GCC_SDCC1_APPS_CLK is from way back when this board had a custom DT that didn't follow upstream.
Quoted 5 lines
Quoted 5 lines
Quoted 4 lines
drivers/clk/qcom/clock-apq8096.c +0
-0return clk_init_sdc (priv, rate);break ;case GCC_BLSP2_UART2_APPS_CLK :/*UART2*/
Signature · 1 line
Caleb (they/them)
Re: [PATCH 3/5] clk/qcom: apq8096: fix the sdhci clock
In reply to Jorge RamirezQuoted 22 lines · Jorge Ramirez
Quoted 9 lines · On 07/04/25 14:36:51, [email protected] wrote:
Quoted 8 lines · Jorge Ramirez-Ortiz
Select the right clock for sdhci.
Signed-off-by Jorge Ramirez-Ortiz <[email protected]>Reviewed-by Neil Armstrong <[email protected]>--- drivers/clk/qcom/clock-apq8096.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)Quoted 11 lines
drivers/clk/qcom/clock-apq8096.c static ulong apq8096_clk_set_rate(struct clk *clk, ulong rate) · line 85
Quoted 9 lines
drivers/clk/qcom/clock-apq8096.c +1
-1@@ -83,7 +83,7 @@ static ulong apq8096_clk_set_rate(struct clk *clk, ulong rate)struct msm_clk_priv *priv =dev_get_priv (clk->dev);switch (clk->id) { -case GCC_SDCC1_APPS_CLK :/* SDC1 */ +case GCC_SDCC2_APPS_CLK :/* SDC2 */ Should be
GCC_SDCC2_AHB_CLK
Quoted 1 line
why? also if I do that, mcc fails to probe
The discussion at https://lore.kernel.org/all/Z/OqoqnPb1gfk5iG@trex/ made me thought using GCC_SDCC2_AHB_CLK fixed the sdhci set_rate, but I maybe did misread.
Neil
Quoted 6 lines
Quoted 6 lines
Quoted 5 lines
drivers/clk/qcom/clock-apq8096.c +0
-0return clk_init_sdc (priv, rate);break ;case GCC_BLSP2_UART2_APPS_CLK :/*UART2*/
Re: [PATCH 3/5] clk/qcom: apq8096: fix the sdhci clock
Quoted 23 lines · On 07/04/25 17:12:45, [email protected] wrote:
Quoted 22 lines · Jorge Ramirez
Quoted 20 lines · On 07/04/25 14:36:51, [email protected] wrote:
Quoted 13 lines · Jorge Ramirez-Ortiz
Select the right clock for sdhci.
Signed-off-by Jorge Ramirez-Ortiz <[email protected]>Reviewed-by Neil Armstrong <[email protected]>--- drivers/clk/qcom/clock-apq8096.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)drivers/clk/qcom/clock-apq8096.c +0
-0drivers/clk/qcom/clock-apq8096.c static ulong apq8096_clk_set_rate(struct clk *clk, ulong rate) · line 85
Quoted 4 lines
drivers/clk/qcom/clock-apq8096.c +1
-1@@ -83,7 +83,7 @@ static ulong apq8096_clk_set_rate(struct clk *clk, ulong rate)struct msm_clk_priv *priv =dev_get_priv (clk->dev);switch (clk->id) { -case GCC_SDCC1_APPS_CLK :/* SDC1 */ +case GCC_SDCC2_APPS_CLK :/* SDC2 */ Should be
GCC_SDCC2_AHB_CLK
Quoted 5 lines
Quoted 1 line
why? also if I do that, mcc fails to probe
The discussion at https://lore.kernel.org/all/Z/OqoqnPb1gfk5iG@trex/ made me thought using
GCC_SDCC2_AHB_CLKfixed the sdhciset_rate, but I maybe did misread.Neil
can I add your review/acked?
Quoted 8 lines
Quoted 7 lines
Quoted 7 lines
Quoted 6 lines
drivers/clk/qcom/clock-apq8096.c +0
-0return clk_init_sdc (priv, rate);break ;case GCC_BLSP2_UART2_APPS_CLK :/*UART2*/
PATCH 4/5 clk: stub: add qcom,glink-smd-rpm
In reply to Jorge Ramirez-OrtizAdd support for the resource power manager clocks over SMD/GLINK to be stubbed.
--- drivers/clk/clk-stub.c | 1 + 1 file changed, 1 insertion(+)
drivers/clk/clk-stub.c +1 -0
@@ -15,6 +15,7 @@ static const struct udevice_id nop_parent_ids[] = { { .compatible = "qcom,rpm-proc" }, { .compatible = "qcom,glink-rpm" }, { .compatible = "qcom,rpm-sm6115" }, + { .compatible = "qcom,glink-smd-rpm" }, { } };
Signature · 1 line
2.34.1
Re: [PATCH 4/5] clk: stub: add qcom,glink-smd-rpm
Quoted 13 lines · Jorge Ramirez-Ortiz
Add support for the resource power manager clocks over SMD/GLINK to be stubbed.
Signed-off-by Jorge Ramirez-Ortiz <[email protected]>--- drivers/clk/clk-stub.c | 1 + 1 file changed, 1 insertion(+)drivers/clk/clk-stub.c +0
-0
drivers/clk/clk-stub.c static const struct udevice_id nop_parent_ids[] = { · line 17
Quoted 3 lines
drivers/clk/clk-stub.c +0
-0@@ -15,6 +15,7 @@ static const struct udevice_id nop_parent_ids[] = { { .compatible = "qcom,rpm-proc" }, { .compatible = "qcom,glink-rpm" }, { .compatible = "qcom,rpm-sm6115" },
This platform specific compatible can be dropped now.
Apart from that, feel free to add:
-Sumit
Quoted 7 lines
drivers/clk/clk-stub.c +1
-0+ { .compatible = "qcom,glink-smd-rpm" }, { } };Signature · 1 line
2.34.1
Re: [PATCH 4/5] clk: stub: add qcom,glink-smd-rpm
In reply to Jorge Ramirez-OrtizQuoted 13 lines · Jorge Ramirez-Ortiz
Add support for the resource power manager clocks over SMD/GLINK to be stubbed.
Signed-off-by Jorge Ramirez-Ortiz <[email protected]>--- drivers/clk/clk-stub.c | 1 + 1 file changed, 1 insertion(+)drivers/clk/clk-stub.c +0
-0
drivers/clk/clk-stub.c static const struct udevice_id nop_parent_ids[] = { · line 18
Quoted 4 lines
drivers/clk/clk-stub.c +1
-0@@ -15,6 +15,7 @@ static const struct udevice_id nop_parent_ids[] = { { .compatible = "qcom,rpm-proc" }, { .compatible = "qcom,glink-rpm" }, { .compatible = "qcom,rpm-sm6115" }, + { .compatible = "qcom,glink-smd-rpm" },
You can delete qcom,rpm-sm6115 if you add qcom,glink-smd-rpm
Quoted 3 lines
drivers/clk/clk-stub.c +0
-0{ } };
Re: [PATCH 4/5] clk: stub: add qcom,glink-smd-rpm
Quoted 9 lines · On 07/04/25 14:37:27, [email protected] wrote:
Quoted 8 lines · Jorge Ramirez-Ortiz
Add support for the resource power manager clocks over SMD/GLINK to be stubbed.
Signed-off-by Jorge Ramirez-Ortiz <[email protected]>--- drivers/clk/clk-stub.c | 1 + 1 file changed, 1 insertion(+)
Quoted 11 lines
drivers/clk/clk-stub.c static const struct udevice_id nop_parent_ids[] = { · line 18
Quoted 9 lines
drivers/clk/clk-stub.c +1
-0@@ -15,6 +15,7 @@ static const struct udevice_id nop_parent_ids[] = { { .compatible = "qcom,rpm-proc" }, { .compatible = "qcom,glink-rpm" }, { .compatible = "qcom,rpm-sm6115" }, + { .compatible = "qcom,glink-smd-rpm" },You can delete qcom,rpm-sm6115 if you add qcom,glink-smd-rpm
ok - I wasnt sure if you wanted that as part of a separate commit.
Quoted 4 lines
Quoted 3 lines
drivers/clk/clk-stub.c +0
-0{ } };
PATCH 5/5 configs: dragonboard820: updates
In reply to Jorge Ramirez-OrtizConfigure GPIO and CLK_STUBS
--- configs/dragonboard820c_defconfig | 2 ++ 1 file changed, 2 insertions(+)
configs/dragonboard820c_defconfig +2 -0
@@ -45,4 +45,6 @@ CONFIG_PINCTRL_QCOM_APQ8096=y CONFIG_DM_PMIC=y CONFIG_PMIC_QCOM=y CONFIG_MSM_SERIAL=y +CONFIG_MSM_GPIO=y CONFIG_SPMI_MSM=y +CONFIG_CLK_STUB=y
Signature · 1 line
2.34.1
Hi Jorge,
Long time no speak.
Quoted 5 lines · Jorge Ramirez-Ortiz
Update build instructions.
Signed-off-by Jorge Ramirez-Ortiz <[email protected]>Reviewed-by Neil Armstrong <[email protected]>
Your patch subject has a typo in "udpate" -> "update.
With that fixed:
Quoted 104 lines
--- board/qualcomm/dragonboard820c/readme.txt | 47 ++++++++++------------- 1 file changed, 21 insertions(+), 26 deletions(-)board/qualcomm/dragonboard820c/readme.txt +21
-27@@ -16,10 +16,7 @@ Build & Run instructions ================================================================================ -1) Install mkbootimg and dtbTool from Codeaurora: - - git://codeaurora.org/quic/kernel/skales - commit 8492547e404e969262d9070dee9bdd15668bb70f worked for me. +1) Install mkbootimg 2) Setup CROSS_COMPILE to aarch64 compiler or if you use ccache just do CROSS_COMPILE="ccache aarch64-linux-gnu-"@@ -33,15 +30,15 @@ $ touch rd -5) Generate qualcomm device tree table with dtbTool +5) Append the dtb to the u-boot binary discarding the internal dtb. - $ dtbTool -o dt.img arch/arm/dts + $ gzip u-boot-nodtb.bin + $ cat u-boot.dtb >> u-boot-nodtb.bin.gz 6) Generate Android boot image with mkbootimg: - $ mkbootimg --kernel=u-boot-dtb.bin \ + $ mkbootimg --kernel=u-boot-nodtb.bin.gz \ --output=u-boot.img \ - --dt=dt.img \ --pagesize 4096 \ --base 0x80000000 \ --ramdisk=rd \@@ -251,44 +248,42 @@ Wait for 5 seconds before proceeding [5300] booting linux @ 0x80080000, ramdisk @ 0x82200000 (0), tags/device tree @ 0x82000000 [5310] Jumping to kernel via monitor -U-Boot 2017.11-00145-ge895117 (Nov 29 2017 - 10:04:06 +0100) +U-Boot 2025.04-rc5-00020-g40a61ca0e7eb-dirty (Apr 07 2025 - 09:37:03 +0200) Qualcomm-DragonBoard 820C -DRAM: 3 GiB -PSCI: v1.0 -MMC: sdhci@74a4900: 0 +DRAM: 3.5 GiB (effective 3 GiB) +Core: 136 devices, 18 uclasses, devicetree: board +MMC: Bulk clocks not available (-19), trying core clock +mmc@74a4900: 0 +Loading Environment from EXT4... OK In: serial@75b0000 Out: serial@75b0000 Err: serial@75b0000 -Net: Net Initialization Skipped -No ethernet found. +Net: No ethernet found. Hit any key to stop autoboot: 0 switch to partitions #0, OK mmc0 is current device Scanning mmc 0:1... Found /extlinux/extlinux.conf Retrieving file: /extlinux/extlinux.conf -433 bytes read in 71 ms (5.9 KiB/s) 1: nfs root - +Enter choice: 1: nfs root Retrieving file: /uImage -19397184 bytes read in 2024 ms (9.1 MiB/s) -append: root=/dev/nfs rw nfsroot=192.168.1.2:/db820c/rootfs,v3,tcp rootwait ip=dhcp consoleblank=0 console=tty0 console=ttyMSM0,115200n8 earlyprintk earlycon=msm_serial_dm,0x75b0000 androidboot.bootdevice=624000.ufshc androidboot.verifiedbootstate=orange androidboot.ver0 - +append: root=/dev/nfs rw nfsroot=192.168.1.6:/home/jramirez/Src/qualcomm-lt/db820c/rootfs,v3,tcp rootwait ip=dhcp consoleblank=0 console=tty0 console=ttyMSM0,115200n8 earlyprintk earlyco0 Retrieving file: /apq8096-db820c.dtb -38134 bytes read in 37 ms (1005.9 KiB/s) - -## Booting kernel from Legacy Image at 95000000 ... +## Booting kernel from Legacy Image at 155000000 ... Image Name: Dragonboard820c Image Type: AArch64 Linux Kernel Image (uncompressed) Data Size: 19397120 Bytes = 18.5 MiB Load Address: 80080000 Entry Point: 80080000 Verifying Checksum ... OK -## Flattened Device Tree blob at 93000000 - Booting using the fdt blob at 0x93000000 - Loading Kernel Image ... OK - Using Device Tree in place at 0000000093000000, end 000000009300c4f5 +## Flattened Device Tree blob at 148600000 + Booting using the fdt blob at 0x148600000 +Working FDT set to 148600000 + Loading Kernel Image to 80080000 + Using Device Tree in place at 0000000148600000, end 000000014860c4f5 +Working FDT set to 148600000 Starting kernel ... --2.34.1
Quoted 3 lines · Christopher Obbard
Hi Jorge,
Long time no speak.
hey, yeah, Embedded Recipes 2023 I think.
Quoted 11 lines
Quoted 5 lines · Jorge Ramirez-Ortiz
Update build instructions.
Signed-off-by Jorge Ramirez-Ortiz <[email protected]>Reviewed-by Neil Armstrong <[email protected]>Your patch subject has a typo in "udpate" -> "update.
thanks!
Quoted 107 lines
With that fixed:
Reviewed-by Christopher Obbard <[email protected]>Quoted 104 lines
--- board/qualcomm/dragonboard820c/readme.txt | 47 ++++++++++------------- 1 file changed, 21 insertions(+), 26 deletions(-)board/qualcomm/dragonboard820c/readme.txt +21
-27@@ -16,10 +16,7 @@ Build & Run instructions ================================================================================ -1) Install mkbootimg and dtbTool from Codeaurora: - - git://codeaurora.org/quic/kernel/skales - commit 8492547e404e969262d9070dee9bdd15668bb70f worked for me. +1) Install mkbootimg 2) Setup CROSS_COMPILE to aarch64 compiler or if you use ccache just do CROSS_COMPILE="ccache aarch64-linux-gnu-"@@ -33,15 +30,15 @@ $ touch rd -5) Generate qualcomm device tree table with dtbTool +5) Append the dtb to the u-boot binary discarding the internal dtb. - $ dtbTool -o dt.img arch/arm/dts + $ gzip u-boot-nodtb.bin + $ cat u-boot.dtb >> u-boot-nodtb.bin.gz 6) Generate Android boot image with mkbootimg: - $ mkbootimg --kernel=u-boot-dtb.bin \ + $ mkbootimg --kernel=u-boot-nodtb.bin.gz \ --output=u-boot.img \ - --dt=dt.img \ --pagesize 4096 \ --base 0x80000000 \ --ramdisk=rd \@@ -251,44 +248,42 @@ Wait for 5 seconds before proceeding [5300] booting linux @ 0x80080000, ramdisk @ 0x82200000 (0), tags/device tree @ 0x82000000 [5310] Jumping to kernel via monitor -U-Boot 2017.11-00145-ge895117 (Nov 29 2017 - 10:04:06 +0100) +U-Boot 2025.04-rc5-00020-g40a61ca0e7eb-dirty (Apr 07 2025 - 09:37:03 +0200) Qualcomm-DragonBoard 820C -DRAM: 3 GiB -PSCI: v1.0 -MMC: sdhci@74a4900: 0 +DRAM: 3.5 GiB (effective 3 GiB) +Core: 136 devices, 18 uclasses, devicetree: board +MMC: Bulk clocks not available (-19), trying core clock +mmc@74a4900: 0 +Loading Environment from EXT4... OK In: serial@75b0000 Out: serial@75b0000 Err: serial@75b0000 -Net: Net Initialization Skipped -No ethernet found. +Net: No ethernet found. Hit any key to stop autoboot: 0 switch to partitions #0, OK mmc0 is current device Scanning mmc 0:1... Found /extlinux/extlinux.conf Retrieving file: /extlinux/extlinux.conf -433 bytes read in 71 ms (5.9 KiB/s) 1: nfs root - +Enter choice: 1: nfs root Retrieving file: /uImage -19397184 bytes read in 2024 ms (9.1 MiB/s) -append: root=/dev/nfs rw nfsroot=192.168.1.2:/db820c/rootfs,v3,tcp rootwait ip=dhcp consoleblank=0 console=tty0 console=ttyMSM0,115200n8 earlyprintk earlycon=msm_serial_dm,0x75b0000 androidboot.bootdevice=624000.ufshc androidboot.verifiedbootstate=orange androidboot.ver0 - +append: root=/dev/nfs rw nfsroot=192.168.1.6:/home/jramirez/Src/qualcomm-lt/db820c/rootfs,v3,tcp rootwait ip=dhcp consoleblank=0 console=tty0 console=ttyMSM0,115200n8 earlyprintk earlyco0 Retrieving file: /apq8096-db820c.dtb -38134 bytes read in 37 ms (1005.9 KiB/s) - -## Booting kernel from Legacy Image at 95000000 ... +## Booting kernel from Legacy Image at 155000000 ... Image Name: Dragonboard820c Image Type: AArch64 Linux Kernel Image (uncompressed) Data Size: 19397120 Bytes = 18.5 MiB Load Address: 80080000 Entry Point: 80080000 Verifying Checksum ... OK -## Flattened Device Tree blob at 93000000 - Booting using the fdt blob at 0x93000000 - Loading Kernel Image ... OK - Using Device Tree in place at 0000000093000000, end 000000009300c4f5 +## Flattened Device Tree blob at 148600000 + Booting using the fdt blob at 0x148600000 +Working FDT set to 148600000 + Loading Kernel Image to 80080000 + Using Device Tree in place at 0000000148600000, end 000000014860c4f5 +Working FDT set to 148600000 Starting kernel ... --2.34.1
Quoted 4 lines · Jorge Ramirez-Ortiz
Update build instructions.
Signed-off-by Jorge Ramirez-Ortiz <[email protected]>Reviewed-by Neil Armstrong <[email protected]>
Quoted 100 lines
board/qualcomm/dragonboard820c/readme.txt | 47 ++++++++++------------- 1 file changed, 21 insertions(+), 26 deletions(-)board/qualcomm/dragonboard820c/readme.txt +21
-26@@ -16,10 +16,7 @@ Build & Run instructions ================================================================================ -1) Install mkbootimg and dtbTool from Codeaurora: - - git://codeaurora.org/quic/kernel/skales - commit 8492547e404e969262d9070dee9bdd15668bb70f worked for me. +1) Install mkbootimg 2) Setup CROSS_COMPILE to aarch64 compiler or if you use ccache just do CROSS_COMPILE="ccache aarch64-linux-gnu-"@@ -33,15 +30,15 @@ $ touch rd -5) Generate qualcomm device tree table with dtbTool +5) Append the dtb to the u-boot binary discarding the internal dtb. - $ dtbTool -o dt.img arch/arm/dts + $ gzip u-boot-nodtb.bin + $ cat u-boot.dtb >> u-boot-nodtb.bin.gz 6) Generate Android boot image with mkbootimg: - $ mkbootimg --kernel=u-boot-dtb.bin \ + $ mkbootimg --kernel=u-boot-nodtb.bin.gz \ --output=u-boot.img \ - --dt=dt.img \ --pagesize 4096 \ --base 0x80000000 \ --ramdisk=rd \@@ -251,44 +248,42 @@ Wait for 5 seconds before proceeding [5300] booting linux @ 0x80080000, ramdisk @ 0x82200000 (0), tags/device tree @ 0x82000000 [5310] Jumping to kernel via monitor -U-Boot 2017.11-00145-ge895117 (Nov 29 2017 - 10:04:06 +0100) +U-Boot 2025.04-rc5-00020-g40a61ca0e7eb-dirty (Apr 07 2025 - 09:37:03 +0200) Qualcomm-DragonBoard 820C -DRAM: 3 GiB -PSCI: v1.0 -MMC: sdhci@74a4900: 0 +DRAM: 3.5 GiB (effective 3 GiB) +Core: 136 devices, 18 uclasses, devicetree: board +MMC: Bulk clocks not available (-19), trying core clock +mmc@74a4900: 0 +Loading Environment from EXT4... OK In: serial@75b0000 Out: serial@75b0000 Err: serial@75b0000 -Net: Net Initialization Skipped -No ethernet found. +Net: No ethernet found. Hit any key to stop autoboot: 0 switch to partitions #0, OK mmc0 is current device Scanning mmc 0:1... Found /extlinux/extlinux.conf Retrieving file: /extlinux/extlinux.conf -433 bytes read in 71 ms (5.9 KiB/s) 1: nfs root - +Enter choice: 1: nfs root Retrieving file: /uImage -19397184 bytes read in 2024 ms (9.1 MiB/s) -append: root=/dev/nfs rw nfsroot=192.168.1.2:/db820c/rootfs,v3,tcp rootwait ip=dhcp consoleblank=0 console=tty0 console=ttyMSM0,115200n8 earlyprintk earlycon=msm_serial_dm,0x75b0000 androidboot.bootdevice=624000.ufshc androidboot.verifiedbootstate=orange androidboot.ver0 - +append: root=/dev/nfs rw nfsroot=192.168.1.6:/home/jramirez/Src/qualcomm-lt/db820c/rootfs,v3,tcp rootwait ip=dhcp consoleblank=0 console=tty0 console=ttyMSM0,115200n8 earlyprintk earlyco0 Retrieving file: /apq8096-db820c.dtb -38134 bytes read in 37 ms (1005.9 KiB/s) - -## Booting kernel from Legacy Image at 95000000 ... +## Booting kernel from Legacy Image at 155000000 ... Image Name: Dragonboard820c Image Type: AArch64 Linux Kernel Image (uncompressed) Data Size: 19397120 Bytes = 18.5 MiB Load Address: 80080000 Entry Point: 80080000 Verifying Checksum ... OK -## Flattened Device Tree blob at 93000000 - Booting using the fdt blob at 0x93000000 - Loading Kernel Image ... OK - Using Device Tree in place at 0000000093000000, end 000000009300c4f5 +## Flattened Device Tree blob at 148600000 + Booting using the fdt blob at 0x148600000 +Working FDT set to 148600000 + Loading Kernel Image to 80080000 + Using Device Tree in place at 0000000148600000, end 000000014860c4f5 +Working FDT set to 148600000 Starting kernel ...
Signature · 1 line
Caleb (they/them)