Non-urgent fixes and improvments for omap3-rom-rng
Subsystems (6)
Tony Lindgren
maintainerv2 cover Non-urgent fixes and improvments for omap3-rom-rng
Hi all,
Here are fixes and improvments for omap3-rom-rng that's been broken for a while.
The first four patches get it working, and then the last two patches add support for runtime PM.
I did not add Sebastian's acks from v1 set as many of the patches changed. Please review again :)
Regards,
Tony
Changes since v1:
- Use clk_prepare_enable() as pointed out by Sebastian
- Simplify runtime PM changes patch
- Add a new patch for devm changes as suggested by Sebastian
Tony Lindgren (7):
ARM: OMAP2+: Check omap3-rom-rng for GP device instead of HS device
hwrng: omap3-rom - Fix missing clock by probing with device tree
hwrng: omap3-rom - Call clk_disable_unprepare() on exit only if not
idled
hwrng: omap3-rom - Initialize default quality to get data
hwrng: omap3-rom - Update to use standard driver data
hwrng: omap3-rom - Use runtime PM instead of custom functions
hwrng: omap3-rom - Use devm hwrng and runtime PM
.../devicetree/bindings/rng/omap3_rom_rng.txt | 27 +++ arch/arm/boot/dts/omap3-n900.dts | 6 + arch/arm/mach-omap2/pdata-quirks.c | 14 +- drivers/char/hw_random/omap3-rom-rng.c | 168 +++++++++++------- 4 files changed, 139 insertions(+), 76 deletions(-) create mode 100644 Documentation/devicetree/bindings/rng/omap3_rom_rng.txt
Signature · 1 line
2.23.0
Tony Lindgren
maintainerPATCH v2 1/7 ARM: OMAP2+: Check omap3-rom-rng for GP device instead of HS device
In general we should check for GP device instead of HS device unless the other options such as EMU are also checked. Otherwise omap3-rom-rng won't probe on few of the old n900 macro boards still in service in automated build and boot test systems.
--- arch/arm/mach-omap2/pdata-quirks.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm/mach-omap2/pdata-quirks.c +1 -1
@@ -276,7 +276,7 @@ static void __init nokia_n900_legacy_init(void) mmc_pdata[0 ].name ="external" ; mmc_pdata[1 ].name ="internal" ; -if (omap_type () ==OMAP2_DEVICE_TYPE_SEC ) { +if (omap_type () !=OMAP2_DEVICE_TYPE_GP ) {if (IS_ENABLED (CONFIG_ARM_ERRATA_430973 )) {pr_info ("RX-51: Enabling ARM errata 430973 workaround\n" );/* set IBE to 1 */
Signature · 1 line
2.23.0
Tony Lindgren
maintainerPATCH v2 2/7 hwrng: omap3-rom - Fix missing clock by probing with device tree
In reply to Tony LindgrenCommit 0ed266d7ae5e ("clk: ti: omap3: cleanup unnecessary clock aliases") removed old omap3 clock framework aliases but caused omap3-rom-rng to stop working with clock not found error.
Based on discussions on the mailing list it was requested by Tero Kristo that it would be best to fix this issue by probing omap3-rom-rng using device tree to provide a proper clk property. The other option would be to add back the missing clock alias, but that does not help moving things forward with removing old legacy platform_data.
Let's also add a proper device tree binding and keep it together with the fix.
--- .../devicetree/bindings/rng/omap3_rom_rng.txt | 27 +++++++++++++++++++ arch/arm/boot/dts/omap3-n900.dts | 6 +++++ arch/arm/mach-omap2/pdata-quirks.c | 12 +-------- drivers/char/hw_random/omap3-rom-rng.c | 17 ++++++++++-- 4 files changed, 49 insertions(+), 13 deletions(-) create mode 100644 Documentation/devicetree/bindings/rng/omap3_rom_rng.txt
Documentation/devicetree/bindings/rng/omap3_rom_rng.txt new file +27 -0
@@ -0,0 +1,27 @@ +OMAP ROM RNG driver binding + +Secure SoCs may provide RNG via secure ROM calls like Nokia N900 does. The +implementation can depend on the SoC secure ROM used. + +- compatible: + Usage: required + Value type: <string> + Definition: must be "nokia,n900-rom-rng" + +- clocks: + Usage: required + Value type: <prop-encoded-array> + Definition: reference to the the RNG interface clock + +- clock-names: + Usage: required + Value type: <stringlist> + Definition: must be "ick" + +Example: + + rom_rng: rng { + compatible = "nokia,n900-rom-rng"; + clocks = <&rng_ick>; + clock-names = "ick"; + };
arch/arm/boot/dts/omap3-n900.dts +6 -0
@@ -155,6 +155,12 @@ pwms = <&pwm9 0 26316 0>; /* 38000 Hz */ }; + rom_rng: rng { + compatible = "nokia,n900-rom-rng"; + clocks = <&rng_ick>; + clock-names = "ick"; + }; + /* controlled (enabled/disabled) directly by bcm2048 and wl1251 */ vctcxo: vctcxo { compatible = "fixed-clock";
arch/arm/mach-omap2/pdata-quirks.c +1 -11
@@ -262,14 +262,6 @@ static void __init am3517_evm_legacy_init(void)am35xx_emac_reset (); } -static struct platform_device omap3_rom_rng_device = { - .name ="omap3-rom-rng" , - .id =-1 , - .dev = { - .platform_data = rx51_secure_rng_call, - }, -}; -static void __init nokia_n900_legacy_init (void ) {hsmmc2_internal_input_clk ();
@@ -285,9 +277,6 @@ static void __init nokia_n900_legacy_init(void)pr_warn ("RX-51: Not enabling ARM errata 430973 workaround\n" );pr_warn ("Thumb binaries may crash randomly without this workaround\n" ); } - -pr_info ("RX-51: Registering OMAP3 HWRNG device\n" ); -platform_device_register (&omap3_rom_rng_device); } }
@@ -627,6 +616,7 @@ static struct of_dev_auxdata omap_auxdata_lookup[] = {OF_DEV_AUXDATA ("ti,davinci_mdio" ,0x5c030000 ,"davinci_mdio.0" ,NULL ),OF_DEV_AUXDATA ("ti,am3517-emac" ,0x5c000000 ,"davinci_emac.0" , &am35xx_emac_pdata), +OF_DEV_AUXDATA ("nokia,n900-rom-rng" ,0 ,NULL , rx51_secure_rng_call),/* McBSP modules with sidetone core */ #if IS_ENABLED(CONFIG_SND_SOC_OMAP_MCBSP) OF_DEV_AUXDATA("ti,omap3-mcbsp", 0x49022000, "49022000.mcbsp", &mcbsp_pdata),
drivers/char/hw_random/omap3-rom-rng.c +15 -2
@@ -20,6 +20,8 @@#include <linux/workqueue.h> #include <linux/clk.h> #include <linux/err.h> +#include <linux/of.h> +#include <linux/of_device.h> #include <linux/platform_device.h> #define RNG_RESET 0x01
@@ -86,14 +88,18 @@ static int omap3_rom_rng_read(struct hwrng *rng, void *data, size_t max, bool w)static struct hwrng omap3_rom_rng_ops = { .name ="omap3-rom" , - .read = omap3_rom_rng_read, };static int omap3_rom_rng_probe (struct platform_device *pdev) {int ret =0 ; -pr_info ("initializing\n" ); + omap3_rom_rng_ops.read =of_device_get_match_data (&pdev->dev); +if (!omap3_rom_rng_ops.read) { +dev_err (&pdev->dev,"missing rom code handler\n" ); + +return -ENODEV ; + } omap3_rom_rng_call = pdev->dev.platform_data;if (!omap3_rom_rng_call) {
@@ -125,9 +131,16 @@ static int omap3_rom_rng_remove(struct platform_device *pdev)return 0 ; } +static const struct of_device_id omap_rom_rng_match[] = { + { .compatible ="nokia,n900-rom-rng" , .data = omap3_rom_rng_read, }, + {/* sentinel */ }, +}; +MODULE_DEVICE_TABLE (of, omap_rom_rng_match); +static struct platform_driver omap3_rom_rng_driver = { .driver = { .name ="omap3-rom-rng" , + .of_match_table = omap_rom_rng_match, }, .probe = omap3_rom_rng_probe, .remove = omap3_rom_rng_remove,
Signature · 1 line
2.23.0
Re: [PATCH 2/7] hwrng: omap3-rom - Fix missing clock by probing with device tree
Quoted 23 lines · Tony Lindgren
Commit
0ed266d7ae5e("clk: ti: omap3: cleanup unnecessary clock aliases") removed old omap3 clock framework aliases but caused omap3-rom-rng to stop working with clock not found error.Based on discussions on the mailing list it was requested by Tero Kristo that it would be best to fix this issue by probing omap3-rom-rng using device tree to provide a proper clk property. The other option would be to add back the missing clock alias, but that does not help moving things forward with removing old legacy
platform_data.Let's also add a proper device tree binding and keep it together with the fix.
Cc Aaro Koskinen <[email protected]>Cc Adam Ford <[email protected]>Cc Pali Rohár <[email protected]>Cc Rob Herring <[email protected]>Cc Sebastian Reichel <[email protected]>Cc Tero Kristo <[email protected]>Fixes 0ed266d7ae5e ("clk: ti: omap3: cleanup unnecessary clock aliases")Reported-by Aaro Koskinen <[email protected]>Signed-off-by Tony Lindgren <[email protected]>
Quoted 8 lines
--- .../devicetree/bindings/rng/omap3_rom_rng.txt | 27 +++++++++++++++++++ arch/arm/boot/dts/omap3-n900.dts | 6 +++++ arch/arm/mach-omap2/pdata-quirks.c | 12 +-------- drivers/char/hw_random/omap3-rom-rng.c | 17 ++++++++++-- 4 files changed, 49 insertions(+), 13 deletions(-) create mode 100644 Documentation/devicetree/bindings/rng/omap3_rom_rng.txt
Tony Lindgren
maintainerPATCH v2 3/7 hwrng: omap3-rom - Call clk_disable_unprepare() on exit only if not idled
In reply to Tony LindgrenWhen unloading omap3-rom-rng, we'll get the following:
WARNING: CPU: 0 PID: 100 at drivers/clk/clk.c:948 clk_core_disable
This is because the clock may be already disabled by omap3_rom_rng_idle(). Let's fix the issue by checking for rng_idle on exit.
--- drivers/char/hw_random/omap3-rom-rng.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/char/hw_random/omap3-rom-rng.c +2 -1
@@ -127,7 +127,8 @@ static int omap3_rom_rng_remove(struct platform_device *pdev) {cancel_delayed_work_sync (&idle_work);hwrng_unregister (&omap3_rom_rng_ops); -clk_disable_unprepare (rng_clk); +if (!rng_idle) +clk_disable_unprepare (rng_clk);return 0 ; }
Signature · 1 line
2.23.0
Tony Lindgren
maintainerPATCH v2 4/7 hwrng: omap3-rom - Initialize default quality to get data
In reply to Tony LindgrenSimilar to commit 62f95ae805fa ("hwrng: omap - Set default quality") we need to initialize the default quality for the RNG to be used.
The symptoms of this problem is that doing hd /dev/random does not produce much data at all.
--- drivers/char/hw_random/omap3-rom-rng.c | 1 + 1 file changed, 1 insertion(+)
drivers/char/hw_random/omap3-rom-rng.c +1 -0
@@ -88,6 +88,7 @@ static int omap3_rom_rng_read(struct hwrng *rng, void *data, size_t max, bool w)static struct hwrng omap3_rom_rng_ops = { .name ="omap3-rom" , + .quality =900 , };static int omap3_rom_rng_probe (struct platform_device *pdev)
Signature · 1 line
2.23.0
Tony Lindgren
maintainerPATCH v2 5/7 hwrng: omap3-rom - Update to use standard driver data
In reply to Tony LindgrenLet's update omap3-rom-rng to use standard driver data to make it easier to add runtime PM support in the following patch. Just use it for the rng ops and clock for now. Let's still keep also old rng_clk still around, we will remove delayed work and rng_clk with runtime PM in the next patch.
--- drivers/char/hw_random/omap3-rom-rng.c | 45 +++++++++++++++++--------- 1 file changed, 30 insertions(+), 15 deletions(-)
drivers/char/hw_random/omap3-rom-rng.c +30 -15
@@ -31,6 +31,12 @@/* param1: ptr, param2: count, param3: flag */ static u32 (*omap3_rom_rng_call)(u32 ,u32 ,u32 ); +struct omap_rom_rng { +struct clk *clk; +struct device *dev; +struct hwrng ops; +}; +static struct delayed_work idle_work;static int rng_idle;static struct clk *rng_clk;
@@ -86,48 +92,57 @@ static int omap3_rom_rng_read(struct hwrng *rng, void *data, size_t max, bool w)return 4 ; } -static struct hwrng omap3_rom_rng_ops = { - .name ="omap3-rom" , - .quality =900 , -}; -static int omap3_rom_rng_probe (struct platform_device *pdev) { +struct omap_rom_rng *ddata;int ret =0 ; - omap3_rom_rng_ops.read =of_device_get_match_data (&pdev->dev); -if (!omap3_rom_rng_ops.read) { + ddata =devm_kzalloc (&pdev->dev,sizeof (*ddata),GFP_KERNEL ); +if (!ddata) +return -ENOMEM ; + + ddata->dev = &pdev->dev; + ddata->ops.priv = (unsigned long )ddata; + ddata->ops.name ="omap3-rom" ; + ddata->ops.read =of_device_get_match_data (&pdev->dev); + ddata->ops.quality =900 ; +if (!ddata->ops.read) {dev_err (&pdev->dev,"missing rom code handler\n" );return -ENODEV ; } +dev_set_drvdata (ddata->dev, ddata); omap3_rom_rng_call = pdev->dev.platform_data;if (!omap3_rom_rng_call) { -pr_err ("omap3_rom_rng_call is NULL\n" ); +dev_err (ddata->dev,"rom_rng_call is NULL\n" );return -EINVAL ; }INIT_DELAYED_WORK (&idle_work, omap3_rom_rng_idle); - rng_clk =devm_clk_get (&pdev->dev,"ick" ); -if (IS_ERR (rng_clk)) { -pr_err ("unable to get RNG clock\n" ); -return PTR_ERR (rng_clk); + ddata->clk =devm_clk_get (ddata->dev,"ick" ); +if (IS_ERR (ddata->clk)) { +dev_err (ddata->dev,"unable to get RNG clock\n" ); +return PTR_ERR (ddata->clk); } + rng_clk = ddata->clk;/* Leave the RNG in reset state. */ - ret =clk_prepare_enable (rng_clk); + ret =clk_prepare_enable (ddata->clk);if (ret)return ret;omap3_rom_rng_idle (0 ); -return hwrng_register (&omap3_rom_rng_ops); +return hwrng_register (&ddata->ops); }static int omap3_rom_rng_remove (struct platform_device *pdev) { +struct omap_rom_rng *ddata; + + ddata =dev_get_drvdata (&pdev->dev);cancel_delayed_work_sync (&idle_work); -hwrng_unregister (&omap3_rom_rng_ops); +hwrng_unregister (&ddata->ops);if (!rng_idle)clk_disable_unprepare (rng_clk);return 0 ;
Signature · 1 line
2.23.0
Tony Lindgren
maintainerPATCH v2 6/7 hwrng: omap3-rom - Use runtime PM instead of custom functions
In reply to Tony LindgrenNowadays we have runtime PM, and we can use it with autosuspend_timeout to idle things automatically. This allows us to get rid of the custom PM implementation.
We enable clocks and init RNG in runtime_resume, and reset RNG and disable clocks in runtime_suspend. And then omap3_rom_rng_read() becomes very simple and we don't need the old functions for omap3_rom_rng_idle() and omap3_rom_rng_get_random(). We can now also get rid of pr_fmt as we're using dev_err instead.
--- drivers/char/hw_random/omap3-rom-rng.c | 126 ++++++++++++++----------- 1 file changed, 73 insertions(+), 53 deletions(-)
drivers/char/hw_random/omap3-rom-rng.c +73 -53
@@ -11,8 +11,6 @@* warranty of any kind, whether express or implied. */ -#define pr_fmt (fmt) KBUILD_MODNAME ": " fmt -#include <linux/module.h> #include <linux/init.h> #include <linux/random.h>
@@ -23,73 +21,83 @@#include <linux/of.h> #include <linux/of_device.h> #include <linux/platform_device.h> +#include <linux/pm_runtime.h> #define RNG_RESET 0x01#define RNG_GEN_PRNG_HW_INIT 0x02#define RNG_GEN_HW 0x08 -/* param1: ptr, param2: count, param3: flag */ -static u32 (*omap3_rom_rng_call)(u32 ,u32 ,u32 ); -struct omap_rom_rng {struct clk *clk;struct device *dev;struct hwrng ops; +u32 (*rom_rng_call)(u32 ptr,u32 count,u32 flag); }; -static struct delayed_work idle_work; -static int rng_idle; -static struct clk *rng_clk; - -static void omap3_rom_rng_idle (struct work_struct *work) +static int omap3_rom_rng_read (struct hwrng *rng,void *data,size_t max,bool w) { +struct omap_rom_rng *ddata; +u32 ptr;int r; - r =omap3_rom_rng_call (0 ,0 ,RNG_RESET ); -if (r !=0 ) { -pr_err ("reset failed: %d\n" , r); -return ; + ddata = (struct omap_rom_rng *)rng->priv; + + r =pm_runtime_get_sync (ddata->dev); +if (r <0 ) { +pm_runtime_put_noidle (ddata->dev); + +return r; } -clk_disable_unprepare (rng_clk); - rng_idle =1 ; + + ptr =virt_to_phys (data); + r = ddata->rom_rng_call (ptr,4 ,RNG_GEN_HW ); +if (r !=0 ) + r = -EINVAL ; +else + r =4 ; + +pm_runtime_mark_last_busy (ddata->dev); +pm_runtime_put_autosuspend (ddata->dev); + +return r; } -static int omap3_rom_rng_get_random (void *buf,unsigned int count) +static int omap_rom_rng_runtime_suspend (struct device *dev) { -u32 r; -u32 ptr; +struct omap_rom_rng *ddata; +int r; -cancel_delayed_work_sync (&idle_work); -if (rng_idle) { - r =clk_prepare_enable (rng_clk); -if (r) -return r; - - r =omap3_rom_rng_call (0 ,0 ,RNG_GEN_PRNG_HW_INIT ); -if (r !=0 ) { -clk_disable_unprepare (rng_clk); -pr_err ("HW init failed: %d\n" , r); -return -EIO ; - } - rng_idle =0 ; - } + ddata =dev_get_drvdata (dev); - ptr =virt_to_phys (buf); - r =omap3_rom_rng_call (ptr, count,RNG_GEN_HW ); -schedule_delayed_work (&idle_work,msecs_to_jiffies (500 )); + r = ddata->rom_rng_call (0 ,0 ,RNG_RESET );if (r !=0 ) -return -EINVAL ; +dev_err (dev,"reset failed: %d\n" , r); + +clk_disable_unprepare (ddata->clk); +return 0 ; } -static int omap3_rom_rng_read (struct hwrng *rng,void *data,size_t max,bool w) +static int omap_rom_rng_runtime_resume (struct device *dev) { +struct omap_rom_rng *ddata;int r; - r =omap3_rom_rng_get_random (data,4 ); + ddata =dev_get_drvdata (dev); + + r =clk_prepare_enable (ddata->clk);if (r <0 )return r; -return 4 ; + + r = ddata->rom_rng_call (0 ,0 ,RNG_GEN_PRNG_HW_INIT ); +if (r !=0 ) { +clk_disable (ddata->clk); +dev_err (dev,"HW init failed: %d\n" , r); + +return -EIO ; + } + +return 0 ; }static int omap3_rom_rng_probe (struct platform_device *pdev)
@@ -113,27 +121,33 @@ static int omap3_rom_rng_probe(struct platform_device *pdev) }dev_set_drvdata (ddata->dev, ddata); - omap3_rom_rng_call = pdev->dev.platform_data; -if (!omap3_rom_rng_call) { + ddata->rom_rng_call = pdev->dev.platform_data; +if (!ddata->rom_rng_call) {dev_err (ddata->dev,"rom_rng_call is NULL\n" );return -EINVAL ; } -INIT_DELAYED_WORK (&idle_work, omap3_rom_rng_idle); ddata->clk =devm_clk_get (ddata->dev,"ick" );if (IS_ERR (ddata->clk)) {dev_err (ddata->dev,"unable to get RNG clock\n" );return PTR_ERR (ddata->clk); } - rng_clk = ddata->clk; -/* Leave the RNG in reset state. */ - ret =clk_prepare_enable (ddata->clk); -if (ret) -return ret; -omap3_rom_rng_idle (0 ); +pm_runtime_enable (ddata->dev); + + ret =hwrng_register (&ddata->ops); +if (!ret) + goto err_disable; + +pm_runtime_set_autosuspend_delay (ddata->dev,500 ); +pm_runtime_use_autosuspend (ddata->dev); + +return 0 ; -return hwrng_register (&ddata->ops); +err_disable: +pm_runtime_disable (ddata->dev); + +return ret; }static int omap3_rom_rng_remove (struct platform_device *pdev)
@@ -141,10 +155,10 @@ static int omap3_rom_rng_remove(struct platform_device *pdev)struct omap_rom_rng *ddata; ddata =dev_get_drvdata (&pdev->dev); -cancel_delayed_work_sync (&idle_work);hwrng_unregister (&ddata->ops); -if (!rng_idle) -clk_disable_unprepare (rng_clk); +pm_runtime_dont_use_autosuspend (ddata->dev); +pm_runtime_disable (ddata->dev); +return 0 ; }
@@ -154,10 +168,16 @@ static const struct of_device_id omap_rom_rng_match[] = { };MODULE_DEVICE_TABLE (of, omap_rom_rng_match); +static const struct dev_pm_ops omap_rom_rng_pm_ops = { +SET_SYSTEM_SLEEP_PM_OPS (omap_rom_rng_runtime_suspend, + omap_rom_rng_runtime_resume) +}; +static struct platform_driver omap3_rom_rng_driver = { .driver = { .name ="omap3-rom-rng" , .of_match_table = omap_rom_rng_match, + .pm = &omap_rom_rng_pm_ops, }, .probe = omap3_rom_rng_probe, .remove = omap3_rom_rng_remove,
Signature · 1 line
2.23.0
Tony Lindgren
maintainerPATCH v2 7/7 hwrng: omap3-rom - Use devm hwrng and runtime PM
In reply to Tony LindgrenThis allows us to simplify things more for probe and exit.
--- drivers/char/hw_random/omap3-rom-rng.c | 42 ++++++++++---------------- 1 file changed, 16 insertions(+), 26 deletions(-)
drivers/char/hw_random/omap3-rom-rng.c +16 -26
@@ -100,6 +100,14 @@ static int omap_rom_rng_runtime_resume(struct device *dev)return 0 ; } +static void omap_rom_rng_finish (void *data) +{ +struct omap_rom_rng *ddata = data; + +pm_runtime_dont_use_autosuspend (ddata->dev); +pm_runtime_disable (ddata->dev); +} +static int omap3_rom_rng_probe (struct platform_device *pdev) {struct omap_rom_rng *ddata;
@@ -133,33 +141,16 @@ static int omap3_rom_rng_probe(struct platform_device *pdev)return PTR_ERR (ddata->clk); } -pm_runtime_enable (ddata->dev); - - ret =hwrng_register (&ddata->ops); -if (!ret) - goto err_disable; - -pm_runtime_set_autosuspend_delay (ddata->dev,500 ); -pm_runtime_use_autosuspend (ddata->dev); - -return 0 ; - -err_disable: -pm_runtime_disable (ddata->dev); - -return ret; -} - -static int omap3_rom_rng_remove (struct platform_device *pdev) -{ -struct omap_rom_rng *ddata; +pm_runtime_enable (&pdev->dev); +pm_runtime_set_autosuspend_delay (&pdev->dev,500 ); +pm_runtime_use_autosuspend (&pdev->dev); - ddata =dev_get_drvdata (&pdev->dev); -hwrng_unregister (&ddata->ops); -pm_runtime_dont_use_autosuspend (ddata->dev); -pm_runtime_disable (ddata->dev); + ret =devm_add_action_or_reset (ddata->dev, omap_rom_rng_finish, + ddata); +if (ret) +return ret; -return 0 ; +return devm_hwrng_register (ddata->dev, &ddata->ops); }static const struct of_device_id omap_rom_rng_match[] = {
@@ -180,7 +171,6 @@ static struct platform_driver omap3_rom_rng_driver = { .pm = &omap_rom_rng_pm_ops, }, .probe = omap3_rom_rng_probe, - .remove = omap3_rom_rng_remove, };module_platform_driver (omap3_rom_rng_driver);
Signature · 1 line
2.23.0
Quoted 10 lines · Tony Lindgren
Hi all,
Here are fixes and improvments for omap3-rom-rng that's been broken for a while.
The first four patches get it working, and then the last two patches add support for runtime PM.
I did not add Sebastian's acks from v1 set as many of the patches changed. Please review again :)
Series looks fine to me also, don't have possibility to test omap3 ROM RNG though (don't have HW for this.) For the whole series:
Quoted 20 lines
Regards,
Tony
Changes since v1:
- Useclk_prepare_enable()as pointed out by Sebastian
- Simplify runtime PM changes patch
- Add a new patch for devm changes as suggested by SebastianTony Lindgren (7):
ARM: OMAP2+: Check omap3-rom-rng for GP device instead of HS device
hwrng: omap3-rom - Fix missing clock by probing with device tree
hwrng: omap3-rom - Callclk_disable_unprepare()on exit only if not
idled
hwrng: omap3-rom - Initialize default quality to get data
hwrng: omap3-rom - Update to use standard driver data
hwrng: omap3-rom - Use runtime PM instead of custom functions
hwrng: omap3-rom - Use devm hwrng and runtime PM
Quoted 7 lines
.../devicetree/bindings/rng/omap3_rom_rng.txt | 27 +++ arch/arm/boot/dts/omap3-n900.dts | 6 + arch/arm/mach-omap2/pdata-quirks.c | 14 +- drivers/char/hw_random/omap3-rom-rng.c | 168 +++++++++++------- 4 files changed, 139 insertions(+), 76 deletions(-)create mode 100644
Documentation/devicetree/bindings/rng/omap3_rom_rng.txt
--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
Hi,
Quoted 31 lines · Tony Lindgren
Hi all,
Here are fixes and improvments for omap3-rom-rng that's been broken for a while.
The first four patches get it working, and then the last two patches add support for runtime PM.
I did not add Sebastian's acks from v1 set as many of the patches changed. Please review again :)
Regards,
Tony
Changes since v1:
- Useclk_prepare_enable()as pointed out by Sebastian
- Simplify runtime PM changes patch
- Add a new patch for devm changes as suggested by SebastianTony Lindgren (7):
ARM: OMAP2+: Check omap3-rom-rng for GP device instead of HS device
hwrng: omap3-rom - Fix missing clock by probing with device tree
hwrng: omap3-rom - Callclk_disable_unprepare()on exit only if not
idled
hwrng: omap3-rom - Initialize default quality to get data
hwrng: omap3-rom - Update to use standard driver data
hwrng: omap3-rom - Use runtime PM instead of custom functions
hwrng: omap3-rom - Use devm hwrng and runtime PM
Quoted 6 lines
.../devicetree/bindings/rng/omap3_rom_rng.txt | 27 +++ arch/arm/boot/dts/omap3-n900.dts | 6 + arch/arm/mach-omap2/pdata-quirks.c | 14 +- drivers/char/hw_random/omap3-rom-rng.c | 168 +++++++++++------- 4 files changed, 139 insertions(+), 76 deletions(-) create mode 100644 Documentation/devicetree/bindings/rng/omap3_rom_rng.txt
For the series:
-- Sebastian
Hi,
Quoted 2 lines · Tony Lindgren
Here are fixes and improvments for omap3-rom-rng that's been broken for a while.
Thanks, for the whole series:
A.
Herbert Xu
maintainerQuoted 31 lines · Tony Lindgren
Hi all,
Here are fixes and improvments for omap3-rom-rng that's been broken for a while.
The first four patches get it working, and then the last two patches add support for runtime PM.
I did not add Sebastian's acks from v1 set as many of the patches changed. Please review again :)
Regards,
Tony
Changes since v1:
- Useclk_prepare_enable()as pointed out by Sebastian
- Simplify runtime PM changes patch
- Add a new patch for devm changes as suggested by SebastianTony Lindgren (7):
ARM: OMAP2+: Check omap3-rom-rng for GP device instead of HS device
hwrng: omap3-rom - Fix missing clock by probing with device tree
hwrng: omap3-rom - Callclk_disable_unprepare()on exit only if not
idled
hwrng: omap3-rom - Initialize default quality to get data
hwrng: omap3-rom - Update to use standard driver data
hwrng: omap3-rom - Use runtime PM instead of custom functions
hwrng: omap3-rom - Use devm hwrng and runtime PM
Quoted 6 lines
.../devicetree/bindings/rng/omap3_rom_rng.txt | 27 +++ arch/arm/boot/dts/omap3-n900.dts | 6 + arch/arm/mach-omap2/pdata-quirks.c | 14 +- drivers/char/hw_random/omap3-rom-rng.c | 168 +++++++++++------- 4 files changed, 139 insertions(+), 76 deletions(-) create mode 100644 Documentation/devicetree/bindings/rng/omap3_rom_rng.txt
All applied. Thanks.
Signature · 3 lines
Email: Herbert Xu <[email protected]> Home Page: http://gondor.apana.org.au/~herbert/ PGP Key: http://gondor.apana.org.au/~herbert/pubkey.txt