media: cx88-mpeg: clear interrupt status register before streaming video
Subsystems (2)
PATCH 1/1 media: cx88-mpeg: clear interrupt status register before streaming video
Some cx88 video cards may have transport stream status interrupts set to 1 from cold start. This may lead to errors like this one after initializing the video card:
cx88xx: cx88_print_irqbits: core:irq mpeg [0x100000] ts_err?*
cx8802: cx8802_mpeg_irq: mpeg:general errors: 0x00100000
According to CX2388x datasheet the interrupt status register should be cleared before enabling IRQs to stream video.
Fix it clearing the status register matching the transport stream interrupt mask in the cx8802_start_dma function.
Signed-off-by Daniel González Cabanelas <[email protected]>
--- drivers/media/pci/cx88/cx88-mpeg.c | 3 +++ 1 file changed, 3 insertions(+)
drivers/media/pci/cx88/cx88-mpeg.c +3 -0
@@ -162,6 +162,9 @@ int cx8802_start_dma(struct cx8802_dev *dev,cx_write (MO_TS_GPCNTRL ,GP_COUNT_CONTROL_RESET ); q->count =0 ; +/* clear interrupt status register */ +cx_write (MO_TS_INTSTAT ,0x1f0011 ); +/* enable irqs */ dprintk (1 ,"setting the interrupt mask\n" );cx_set (MO_PCI_INTMSK , core->pci_irqmask |PCI_INT_TSINT );
Signature · 1 line
2.35.1