do not install modules when installing kernel
PATCH 1/1 do not install modules when installing kernel
PA-RISC is the only arch that installs the modules when installing the = kernel.
--- arch/parisc/Makefile | 4 +---
1 Datei ge=E4ndert, 1 Zeile hinzugef=FCgt(+), 3 Zeilen entfernt(-)
arch/parisc/Makefile +0 -0
@@ -113,12 +113,10 @@ palo: vmlinux # Shorthands for known targets not supported by parisc, use vmlinux as= default Image zImage bzImage: vmlinux
=20
-kernel_install: vmlinux
+install: vmlinux
sh $(src)/arch/parisc/install.sh \
$(KERNELRELEASE) $< System.map "$(INSTALL_PATH)"
=20
-install: kernel_install modules_install
Helge Deller
maintainerQuoted 1 line · Rolf Eike Beer
PA-RISC is the only arch that installs the modules when installing th=
e kernel.
Quoted 2 lines
=20
Signed-off-by Rolf Eike Beer <[email protected]>
Thanks!
Applied to my fixes-for-3.9-latest branch at
http://git.kernel.org/cgit/linux/kernel/git/deller/parisc-linux.git
Helge
arch/parisc/Makefile palo: vmlinux · line 113
Quoted 10 lines
--- arch/parisc/Makefile | 4 +---1 Datei ge=E4ndert, 1 Zeile hinzugef=FCgt(+), 3 Zeilen entfernt(-)
=20arch/parisc/Makefile +0
-0@@ -113,12 +113,10 @@ palo: vmlinux # Shorthands for known targets not supported by parisc, use vmlinux =
as default
Quoted 11 lines
arch/parisc/Makefile +0
-0Image zImage bzImage: vmlinux=20
arch/parisc/Makefile +1
-1-kernel_install: vmlinux +install: vmlinux sh $(src)/arch/parisc/install.sh \ $(KERNELRELEASE) $< System.map "$(INSTALL_PATH)"=20
arch/parisc/Makefile +0
-2-install: kernel_install modules_install - CLEAN_FILES +=3D lifimage MRPROPER_FILES +=3D palo.conf
Quoted 2 lines
=20
=20
--
To unsubscribe from this list: send the line "unsubscribe linux-parisc"=
in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Helge,
Quoted 2 lines · Helge Deller
Applied to my fixes-for-3.9-latest branch at
http://git.kernel.org/cgit/linux/kernel/git/deller/parisc-linux.git
I built the above branch yesterday. We seem to have a regression in behavior. My build of perl 5.14.2-18 failed with the following error:
....
Failed 1 test out of 2039, 99.95% okay.
op/sigdispatch.t
### Since not all tests were successful, you may want to run some of ### them individually and examine any diagnostic messages they produce. ### See the INSTALL document's section on "make test".
### You have a good chance to get more information by running
### ./perl harness
### in the 't' directory since most (>=80%) of the tests succeeded. ### You may have to set your dynamic library search path, ### LD_LIBRARY_PATH, to point to the build directory:
### setenv LD_LIBRARY_PATH `pwd`; cd t; ./perl harness ### LD_LIBRARY_PATH=`pwd`; export LD_LIBRARY_PATH; cd t; ./perl harness ### export LD_LIBRARY_PATH=`pwd`; cd t; ./perl harness
### for csh-style shells, like tcsh; or for traditional/modern ### Bourne-style shells, like bash, ksh, and zsh, respectively. u=18.18 s=28.38 cu=1367.86 cs=974.72 scripts=2039 tests=465774 make[1]: *** [test] Error 1
make[1]: Leaving directory `/home/dave/debian/perl/perl-5.14.2'
make: *** [perl.static] Error 2
dpkg-buildpackage: error: debian/rules build gave error exit status 2 Build command 'cd perl-5.14.2 && dpkg-buildpackage -b -uc' failed.
I ran ./perl harness again and the same test failed. As this looked like a kernel issue, I tried the build again with 3.7.6+ and had a successful build.
Dave
--
John David Anglin [email protected]
Helge Deller
maintainerQuoted 34 lines · John David Anglin
Hi Helge,
Quoted 2 lines · Helge Deller
Applied to my fixes-for-3.9-latest branch at
http://git.kernel.org/cgit/linux/kernel/git/deller/parisc-linux.gitI built the above branch yesterday. We seem to have a regression in behavior. My build of perl 5.14.2-18 failed with the following error:
....
Failed 1 test out of 2039, 99.95% okay.
op/sigdispatch.t
### Since not all tests were successful, you may want to run some of ### them individually and examine any diagnostic messages they produce. ### See the INSTALL document's section on "make test".
### You have a good chance to get more information by running
### ./perl harness
### in the 't' directory since most (>=80%) of the tests succeeded. ### You may have to set your dynamic library search path, ###LD_LIBRARY_PATH, to point to the build directory:### setenv LD_LIBRARY_PATH `pwd`; cd t; ./perl harness ### LD_LIBRARY_PATH=`pwd`; export LD_LIBRARY_PATH; cd t; ./perl harness ### export LD_LIBRARY_PATH=`pwd`; cd t; ./perl harness### for csh-style shells, like tcsh; or for traditional/modern ### Bourne-style shells, like bash, ksh, and zsh, respectively. u=18.18 s=28.38 cu=1367.86 cs=974.72 scripts=2039 tests=465774 make[1]: *** [test] Error 1
make[1]: Leaving directory `/home/dave/debian/perl/perl-5.14.2'
make: *** [perl.static] Error 2
dpkg-buildpackage: error: debian/rules build gave error exit status 2 Build command 'cd perl-5.14.2 && dpkg-buildpackage -b -uc' failed.
Quoted 3 lines
I ran ./perl harness again and the same test failed. As this looked like a kernel issue, I tried the build again with 3.7.6+ and had a successful build.
Hi Dave,
please pull Linus tree again on top.
There is a patch-fix from Al Viro regarding signals.... Just a guess....and 3.9 is still not stable...
Helge