Skip to contentSkip to conversation

do not install modules when installing kernel

PATCH In review Rolf Eike Beer 3 participants 4 messages Mar 1, 2013 – Mar 3, 2013 PA-RISC architecture

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 do not install modules when installing kernel

PA-RISC is the only arch that installs the modules when installing the = kernel.

---
 arch/parisc/Makefile | 4 +---

1 Datei ge=E4ndert, 1 Zeile hinzugef=FCgt(+), 3 Zeilen entfernt(-)

arch/parisc/Makefile +0 -0
index ed9a14c..01d95e2 100644
@@ -113,12 +113,10 @@ palo: vmlinux
 # Shorthands for known targets not supported by parisc, use vmlinux as=
 default
 Image zImage bzImage: vmlinux

=20
-kernel_install: vmlinux
+install: vmlinux
sh $(src)/arch/parisc/install.sh \
$(KERNELRELEASE) $< System.map "$(INSTALL_PATH)"
=20
-install: kernel_install modules_install

maintainer
#1 lore raw
Quoted 1 line · Rolf Eike Beer

PA-RISC is the only arch that installs the modules when installing th=

e kernel.

Quoted 2 lines

=20

Thanks!

Applied to my fixes-for-3.9-latest branch at
http://git.kernel.org/cgit/linux/kernel/git/deller/parisc-linux.git

Helge

arch/parisc/Makefile palo: vmlinux · line 113

Quoted 10 lines
---
 arch/parisc/Makefile | 4 +---

1 Datei ge=E4ndert, 1 Zeile hinzugef=FCgt(+), 3 Zeilen entfernt(-)
=20

arch/parisc/Makefile +0 -0
index ed9a14c..01d95e2 100644
@@ -113,12 +113,10 @@ palo: vmlinux
 # Shorthands for known targets not supported by parisc, use vmlinux =

as default

Quoted 11 lines
arch/parisc/Makefile +0 -0
 Image zImage bzImage: vmlinux

=20

arch/parisc/Makefile +1 -1
-kernel_install: vmlinux
+install: vmlinux
 	sh $(src)/arch/parisc/install.sh \
 			$(KERNELRELEASE) $< System.map "$(INSTALL_PATH)"

=20

arch/parisc/Makefile +0 -2
-install: kernel_install modules_install
-
 CLEAN_FILES	+=3D lifimage
 MRPROPER_FILES	+=3D palo.conf
Quoted 2 lines

=20
=20

--
To unsubscribe from this list: send the line "unsubscribe linux-parisc"=
in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html

#2 lore raw

Hi Helge,

Quoted 2 lines · Helge Deller

Applied to my fixes-for-3.9-latest branch at
http://git.kernel.org/cgit/linux/kernel/git/deller/parisc-linux.git

I built the above branch yesterday. We seem to have a regression in behavior. My build of perl 5.14.2-18 failed with the following error:

....
Failed 1 test out of 2039, 99.95% okay.
op/sigdispatch.t
### Since not all tests were successful, you may want to run some of ### them individually and examine any diagnostic messages they produce. ### See the INSTALL document's section on "make test".
### You have a good chance to get more information by running
### ./perl harness
### in the 't' directory since most (>=80%) of the tests succeeded. ### You may have to set your dynamic library search path, ### LD_LIBRARY_PATH, to point to the build directory:

###   setenv LD_LIBRARY_PATH `pwd`; cd t; ./perl harness
###   LD_LIBRARY_PATH=`pwd`; export LD_LIBRARY_PATH; cd t; ./perl harness
###   export LD_LIBRARY_PATH=`pwd`; cd t; ./perl harness

### for csh-style shells, like tcsh; or for traditional/modern ### Bourne-style shells, like bash, ksh, and zsh, respectively. u=18.18 s=28.38 cu=1367.86 cs=974.72 scripts=2039 tests=465774 make[1]: *** [test] Error 1
make[1]: Leaving directory `/home/dave/debian/perl/perl-5.14.2'
make: *** [perl.static] Error 2
dpkg-buildpackage: error: debian/rules build gave error exit status 2 Build command 'cd perl-5.14.2 && dpkg-buildpackage -b -uc' failed.

I ran ./perl harness again and the same test failed. As this looked like a kernel issue, I tried the build again with 3.7.6+ and had a successful build.

Dave
--
John David Anglin [email protected]

maintainer
#3 lore raw
Quoted 34 lines · John David Anglin

Hi Helge,

Quoted 2 lines · Helge Deller

Applied to my fixes-for-3.9-latest branch at
http://git.kernel.org/cgit/linux/kernel/git/deller/parisc-linux.git

I built the above branch yesterday. We seem to have a regression in behavior. My build of perl 5.14.2-18 failed with the following error:

....
Failed 1 test out of 2039, 99.95% okay.
op/sigdispatch.t
### Since not all tests were successful, you may want to run some of ### them individually and examine any diagnostic messages they produce. ### See the INSTALL document's section on "make test".
### You have a good chance to get more information by running
### ./perl harness
### in the 't' directory since most (>=80%) of the tests succeeded. ### You may have to set your dynamic library search path, ### LD_LIBRARY_PATH, to point to the build directory:

###   setenv LD_LIBRARY_PATH `pwd`; cd t; ./perl harness
###   LD_LIBRARY_PATH=`pwd`; export LD_LIBRARY_PATH; cd t; ./perl harness
###   export LD_LIBRARY_PATH=`pwd`; cd t; ./perl harness

### for csh-style shells, like tcsh; or for traditional/modern ### Bourne-style shells, like bash, ksh, and zsh, respectively. u=18.18 s=28.38 cu=1367.86 cs=974.72 scripts=2039 tests=465774 make[1]: *** [test] Error 1
make[1]: Leaving directory `/home/dave/debian/perl/perl-5.14.2'
make: *** [perl.static] Error 2
dpkg-buildpackage: error: debian/rules build gave error exit status 2 Build command 'cd perl-5.14.2 && dpkg-buildpackage -b -uc' failed.

Quoted 3 lines

I ran ./perl harness again and the same test failed. As this looked like a kernel issue, I tried the build again with 3.7.6+ and had a successful build.

Hi Dave,

please pull Linus tree again on top.
There is a patch-fix from Al Viro regarding signals.... Just a guess....and 3.9 is still not stable...

Helge