i2c: designware: code consolidation & cleanups
Subsystems (3)
Andy Shevchenko
reviewerv3 cover i2c: designware: code consolidation & cleanups
The series now consists the following groups of patches:
- fixing cleanup order in error path and remove (patches 1-5)
- refactoring i2c_dw_*_lock_support() (patches 6-7)
- refactoring module alias and device ID tables (patches 8-11)
- unifying firmware parsing and configuring code (patches 12-16)
- miscellaneous cleanups (patches 17-18,22-25)
- consolidating PM ops (patch 19)
- using device_set_node() for all drivers (patches 20-21)
The "Consolidate PM ops" might be considered as rft, however I don't think we have any hardware where the behaviour will be changed, anyways, good to test.
Changelog v3:
- doubled the size of the series
- fixed compilation error (LKP)
- added tags (Andi)
v2: https://lore.kernel.org/r/[email protected]
Changelog v2:
- reworked the series to make it less twisted (Jarkko, Andi)
- added tags to the patches that have been rebased (Andi, Mario, Jarkko)
- introduced a few new changes (PM ops, export namespace)
v1: https://lore.kernel.org/r/[email protected]
Andy Shevchenko (25):
i2c: designware: Delete adapter before disabling in
i2c_dw_pci_remove()
i2c: designware: Fix PM calls order in dw_i2c_plat_probe()
i2c: designware: Fix reset call order in dw_i2c_plat_probe()
i2c: designware: Let PCI core to take care about interrupt vectors
i2c: designware: Fix lock probe call order in dw_i2c_plat_probe()
i2c: designware: Replace a while-loop by for-loop
i2c: designware: Save pointer to semaphore callbacks instead of index
i2c: designware: Add missing 'c' into PCI IDs variable name
i2c: designware: Replace MODULE_ALIAS() with MODULE_DEVICE_TABLE()
i2c: designware: Unify terminator in device ID tables
i2c: designware: Always provide device ID tables
i2c: designware: Drop return value from i2c_dw_acpi_configure()
i2c: designware: Drop return value from dw_i2c_of_configure()
i2c: designware: Rename dw_i2c_of_configure() -> i2c_dw_of_configure()
i2c: designware: Consolidate firmware parsing and configuring code
i2c: designware: Unify the firmware type checks
i2c: designware: Move exports to I2C_DW namespaces
i2c: designware: Remove ->disable() callback
i2c: designware: Consolidate PM ops
i2c: designware: Uninline i2c_dw_probe()
i2c: designware: Propagate firmware node
i2c: designware: Use pci_get_drvdata()
i2c: designware: Use temporary variable for struct device
i2c: designware: Get rid of redundant 'else'
i2c: designware: Fix spelling and other issues in the comments
drivers/i2c/busses/i2c-designware-amdpsp.c | 10 +- drivers/i2c/busses/i2c-designware-common.c | 166 +++++++++- drivers/i2c/busses/i2c-designware-core.h | 47 +-- drivers/i2c/busses/i2c-designware-master.c | 19 +- drivers/i2c/busses/i2c-designware-pcidrv.c | 118 ++----- drivers/i2c/busses/i2c-designware-platdrv.c | 337 +++++++------------- drivers/i2c/busses/i2c-designware-slave.c | 12 +- 7 files changed, 338 insertions(+), 371 deletions(-)
Signature · 1 line
2.43.0.rc1.1.gbec44491f096
Andy Shevchenko
reviewerPATCH v3 1/25 i2c: designware: Delete adapter before disabling in i2c_dw_pci_remove()
Make i2c_dw_pci_remove() to be aligned with dw_i2c_plat_remove() on the sequence of the ceasing I²C operations.
--- drivers/i2c/busses/i2c-designware-pcidrv.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/i2c/busses/i2c-designware-pcidrv.c +3 -1
@@ -354,11 +354,13 @@ static void i2c_dw_pci_remove(struct pci_dev *pdev) {struct dw_i2c_dev *dev =pci_get_drvdata (pdev); +i2c_del_adapter (&dev->adapter); + dev->disable (dev); +pm_runtime_forbid (&pdev->dev);pm_runtime_get_noresume (&pdev->dev); -i2c_del_adapter (&dev->adapter);devm_free_irq (&pdev->dev, dev->irq, dev);pci_free_irq_vectors (pdev); }
Signature · 1 line
2.43.0.rc1.1.gbec44491f096
Re: [PATCH v3 01/25] i2c: designware: Delete adapter before disabling in i2c_dw_pci_remove()
Quoted 4 lines · Andy Shevchenko
Make
i2c_dw_pci_remove()to be aligned withdw_i2c_plat_remove()on the sequence of the ceasing I²C operations.Fixes 18dbdda89f5c ("i2c-designware: Add runtime power management support")
I think this is wrong. Commit 18dbdda89f5c is 12 years ago so is this patch really fixing a real bug that was hiding all these years?
Quoted 14 lines
Signed-off-by Andy Shevchenko <[email protected]>--- drivers/i2c/busses/i2c-designware-pcidrv.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)drivers/i2c/busses/i2c-designware-pcidrv.c +1
-0@@ -354,11 +354,13 @@ static void i2c_dw_pci_remove(struct pci_dev *pdev) {struct dw_i2c_dev *dev =pci_get_drvdata (pdev); +i2c_del_adapter (&dev->adapter);
drivers/i2c/busses/i2c-designware-pcidrv.c static void i2c_dw_pci_remove(struct pci_dev *pdev) · line 366
Quoted 10 lines
drivers/i2c/busses/i2c-designware-pcidrv.c +2
-1+ dev->disable (dev); +pm_runtime_forbid (&pdev->dev);pm_runtime_get_noresume (&pdev->dev); -i2c_del_adapter (&dev->adapter);devm_free_irq (&pdev->dev, dev->irq, dev);pci_free_irq_vectors (pdev); }
Then I believe this patch may potentially introduce a bug. As far as I can see nothing wrong regarding adapter deletion after the commit 18dbdda89f5c:
i2c_dw_pci_probe()
{
...
i2c_add_numbered_adapter()
pm_runtime_enable_stuff()
...
}i2c_dw_pci_remove()
{
...
pm_runtime_disable_stuff()
i2c_del_adapter()
...
}Order is still practically the same in current i2c-designware-pcidrv.c code but after this patch disabling/deletion is not done in reverse order.
Andy Shevchenko
reviewerRe: [PATCH v3 01/25] i2c: designware: Delete adapter before disabling in i2c_dw_pci_remove()
Quoted 8 lines · Jarkko Nikula
Quoted 4 lines · Andy Shevchenko
Make
i2c_dw_pci_remove()to be aligned withdw_i2c_plat_remove()on the sequence of the ceasing I²C operations.Fixes 18dbdda89f5c ("i2c-designware: Add runtime power management support")I think this is wrong. Commit
18dbdda89f5cis 12 years ago so is this patch really fixing a real bug that was hiding all these years?
Why not? But let me check more careful the ordering between two and probe.
Signature · 2 lines
With Best Regards, Andy Shevchenko
Andy Shevchenko
reviewerPATCH v3 2/25 i2c: designware: Fix PM calls order in dw_i2c_plat_probe()
In reply to Andy ShevchenkoWe should not mix managed calls with non-managed. This will break the calls order at the error path and ->remove() stages. Fix this by wrapping PM ops to become managed one.
--- drivers/i2c/busses/i2c-designware-platdrv.c | 28 ++++++++++++--------- 1 file changed, 16 insertions(+), 12 deletions(-)
drivers/i2c/busses/i2c-designware-platdrv.c +16 -12
@@ -177,14 +177,26 @@ static int txgbe_i2c_request_regs(struct dw_i2c_dev *dev)return 0 ; } -static void dw_i2c_plat_pm_cleanup (struct dw_i2c_dev *dev) +static void dw_i2c_plat_pm_cleanup (void *data) { +struct dw_i2c_dev *dev = data; +pm_runtime_disable (dev->dev);if (dev->shared_with_punit)pm_runtime_put_noidle (dev->dev); } +static int dw_i2c_plat_pm_setup (struct dw_i2c_dev *dev) +{ +if (dev->shared_with_punit) +pm_runtime_get_noresume (dev->dev); + +pm_runtime_enable (dev->dev); + +return devm_add_action_or_reset (dev->dev, dw_i2c_plat_pm_cleanup, dev); +} +static int dw_i2c_plat_request_regs (struct dw_i2c_dev *dev) {struct platform_device *pdev =to_platform_device (dev->dev);
@@ -381,19 +393,12 @@ static int dw_i2c_plat_probe(struct platform_device *pdev)pm_runtime_use_autosuspend (&pdev->dev);pm_runtime_set_active (&pdev->dev); -if (dev->shared_with_punit) -pm_runtime_get_noresume (&pdev->dev); - -pm_runtime_enable (&pdev->dev); - - ret =i2c_dw_probe (dev); + ret =dw_i2c_plat_pm_setup (dev);if (ret) - goto exit_probe; + goto exit_reset; -return ret; +return i2c_dw_probe (dev); -exit_probe: -dw_i2c_plat_pm_cleanup (dev); exit_reset:reset_control_assert (dev->rst);return ret;
@@ -411,7 +416,6 @@ static void dw_i2c_plat_remove(struct platform_device *pdev)pm_runtime_dont_use_autosuspend (&pdev->dev);pm_runtime_put_sync (&pdev->dev); -dw_i2c_plat_pm_cleanup (dev);i2c_dw_remove_lock_support (dev);
Signature · 1 line
2.43.0.rc1.1.gbec44491f096
Re: [PATCH v3 02/25] i2c: designware: Fix PM calls order in dw_i2c_plat_probe()
Quoted 6 lines · Andy Shevchenko
We should not mix managed calls with non-managed. This will break the calls order at the error path and ->remove() stages. Fix this by wrapping PM ops to become managed one.
Fixes 36d48fb5766a ("i2c: designware-platdrv: enable RuntimePM before registering to the core")Signed-off-by Andy Shevchenko <[email protected]>
I fail to see what was broken in above commit and how this patch fixes it?
Quoted 49 lines
--- drivers/i2c/busses/i2c-designware-platdrv.c | 28 ++++++++++++--------- 1 file changed, 16 insertions(+), 12 deletions(-)drivers/i2c/busses/i2c-designware-platdrv.c +14
-8@@ -177,14 +177,26 @@ static int txgbe_i2c_request_regs(struct dw_i2c_dev *dev)return 0 ; } -static void dw_i2c_plat_pm_cleanup (struct dw_i2c_dev *dev) +static void dw_i2c_plat_pm_cleanup (void *data) { +struct dw_i2c_dev *dev = data; +pm_runtime_disable (dev->dev);if (dev->shared_with_punit)pm_runtime_put_noidle (dev->dev); } +static int dw_i2c_plat_pm_setup (struct dw_i2c_dev *dev) +{ +if (dev->shared_with_punit) +pm_runtime_get_noresume (dev->dev); + +pm_runtime_enable (dev->dev); + +return devm_add_action_or_reset (dev->dev, dw_i2c_plat_pm_cleanup, dev); +} +static int dw_i2c_plat_request_regs (struct dw_i2c_dev *dev) {struct platform_device *pdev =to_platform_device (dev->dev);@@ -381,19 +393,12 @@ static int dw_i2c_plat_probe(struct platform_device *pdev)pm_runtime_use_autosuspend (&pdev->dev);pm_runtime_set_active (&pdev->dev); -if (dev->shared_with_punit) -pm_runtime_get_noresume (&pdev->dev); - -pm_runtime_enable (&pdev->dev); - - ret =i2c_dw_probe (dev); + ret =dw_i2c_plat_pm_setup (dev);if (ret) - goto exit_probe;
drivers/i2c/busses/i2c-designware-platdrv.c static int dw_i2c_plat_probe(struct platform_device *pdev) · line 404
Quoted 10 lines
drivers/i2c/busses/i2c-designware-platdrv.c +2
-3+ goto exit_reset; -return ret; +return i2c_dw_probe (dev); -exit_probe: -dw_i2c_plat_pm_cleanup (dev); exit_reset:reset_control_assert (dev->rst);return ret;
Is it intended change the reset isn't asserted after this patch in case i2c_dw_probe() fails?
Andy Shevchenko
reviewerRe: [PATCH v3 02/25] i2c: designware: Fix PM calls order in dw_i2c_plat_probe()
Quoted 9 lines · Jarkko Nikula
Quoted 6 lines · Andy Shevchenko
We should not mix managed calls with non-managed. This will break the calls order at the error path and ->remove() stages. Fix this by wrapping PM ops to become managed one.
Fixes 36d48fb5766a ("i2c: designware-platdrv: enable RuntimePM before registering to the core")Signed-off-by Andy Shevchenko <[email protected]>I fail to see what was broken in above commit and how this patch fixes it?
The order of the unwiding probed flow is broken now as devm_*() mixed with non-devm_*() calls. This makes all non-devm_*() calls that interleave devm_*() ones to be also devm_*()-wrapped.
...
Quoted 2 lines
Is it intended change the reset isn't asserted after this patch in case
i2c_dw_probe()fails?
Did you miss that this is become managed with this patch and hence the above is false scenario?
Signature · 2 lines
With Best Regards, Andy Shevchenko
Andy Shevchenko
reviewerRe: [PATCH v3 02/25] i2c: designware: Fix PM calls order in dw_i2c_plat_probe()
Quoted 2 lines · Andy Shevchenko
Quoted 1 line · Jarkko Nikula
On 11/10/23 20:11, Andy Shevchenko wrote:
...
Quoted 5 lines
Quoted 2 lines
Is it intended change the reset isn't asserted after this patch in case
i2c_dw_probe()fails?Did you miss that this is become managed with this patch and hence the above is false scenario?
Ah, I see now what you mean. Sorry, I though about next patch in mind. Indeed, I need to amend this one.
Signature · 2 lines
With Best Regards, Andy Shevchenko
Andy Shevchenko
reviewerPATCH v3 3/25 i2c: designware: Fix reset call order in dw_i2c_plat_probe()
In reply to Andy ShevchenkoWe should not mix managed calls with non-managed. This will break the calls order at the error path and ->remove() stages. Fix this by wrapping reset control to become managed one.
With that start checking the rerurn code from reset_control_deassert() as it may fail and calling assertion in that scenario is not always a good idea.
--- drivers/i2c/busses/i2c-designware-platdrv.c | 56 ++++++++++++--------- 1 file changed, 33 insertions(+), 23 deletions(-)
drivers/i2c/busses/i2c-designware-platdrv.c +33 -23
@@ -285,6 +285,28 @@ static void i2c_dw_remove_lock_support(struct dw_i2c_dev *dev) i2c_dw_semaphore_cb_table[dev->semaphore_idx].remove (dev); } +static void dw_i2c_plat_assert_reset (void *data) +{ +struct dw_i2c_dev *dev = data; + +reset_control_assert (dev->rst); +} + +static int dw_i2c_plat_get_reset (struct dw_i2c_dev *dev) +{ +int ret; + + dev->rst =devm_reset_control_get_optional_exclusive (dev->dev,NULL ); +if (IS_ERR (dev->rst)) +return PTR_ERR (dev->rst); + + ret =reset_control_deassert (dev->rst); +if (ret) +return ret; + +return devm_add_action_or_reset (dev->dev, dw_i2c_plat_assert_reset, dev); +} +static int dw_i2c_plat_probe (struct platform_device *pdev) {struct i2c_adapter *adap;
@@ -312,11 +334,9 @@ static int dw_i2c_plat_probe(struct platform_device *pdev)if (ret)return ret; - dev->rst =devm_reset_control_get_optional_exclusive (&pdev->dev,NULL ); -if (IS_ERR (dev->rst)) -return PTR_ERR (dev->rst); - -reset_control_deassert (dev->rst); + ret =dw_i2c_plat_get_reset (dev); +if (ret) +return ret; t = &dev->timings;i2c_parse_fw_timings (&pdev->dev, t, false);
@@ -331,30 +351,26 @@ static int dw_i2c_plat_probe(struct platform_device *pdev) ret =i2c_dw_validate_speed (dev);if (ret) - goto exit_reset; +return ret; ret =i2c_dw_probe_lock_support (dev);if (ret) - goto exit_reset; +return ret;i2c_dw_configure (dev);/* Optional interface clock */ dev->pclk =devm_clk_get_optional (&pdev->dev,"pclk" ); -if (IS_ERR (dev->pclk)) { - ret =PTR_ERR (dev->pclk); - goto exit_reset; - } +if (IS_ERR (dev->pclk)) +return PTR_ERR (dev->pclk); dev->clk =devm_clk_get_optional (&pdev->dev,NULL ); -if (IS_ERR (dev->clk)) { - ret =PTR_ERR (dev->clk); - goto exit_reset; - } +if (IS_ERR (dev->clk)) +return PTR_ERR (dev->clk); ret =i2c_dw_prepare_clk (dev, true);if (ret) - goto exit_reset; +return ret;if (dev->clk) {u64 clk_khz;
@@ -395,13 +411,9 @@ static int dw_i2c_plat_probe(struct platform_device *pdev) ret =dw_i2c_plat_pm_setup (dev);if (ret) - goto exit_reset; +return ret;return i2c_dw_probe (dev); - -exit_reset: -reset_control_assert (dev->rst); -return ret; }static void dw_i2c_plat_remove (struct platform_device *pdev)
@@ -418,8 +430,6 @@ static void dw_i2c_plat_remove(struct platform_device *pdev)pm_runtime_put_sync (&pdev->dev);i2c_dw_remove_lock_support (dev); - -reset_control_assert (dev->rst); }static int dw_i2c_plat_prepare (struct device *dev)
Signature · 1 line
2.43.0.rc1.1.gbec44491f096
Re: [PATCH v3 03/25] i2c: designware: Fix reset call order in dw_i2c_plat_probe()
Quoted 11 lines · Andy Shevchenko
We should not mix managed calls with non-managed. This will break the calls order at the error path and ->remove() stages. Fix this by wrapping reset control to become managed one.
With that start checking the rerurn code from
reset_control_deassert()as it may fail and calling assertion in that scenario is not always a good idea.Fixes ab809fd81fde ("i2c: designware: add reset interface")Signed-off-by Andy Shevchenko <[email protected]>---
Again, was above commit so broken that this patch qualifies a Fixes tag?
Andy Shevchenko
reviewerPATCH v3 4/25 i2c: designware: Let PCI core to take care about interrupt vectors
In reply to Andy ShevchenkoPCI core, after pcim_enable_device(), takes care about the allocated IRQ vectors, no need to do it explicitly and break the cleaning up order.
--- drivers/i2c/busses/i2c-designware-pcidrv.c | 15 +++------------ 1 file changed, 3 insertions(+), 12 deletions(-)
drivers/i2c/busses/i2c-designware-pcidrv.c +3 -12
@@ -295,10 +295,8 @@ static int i2c_dw_pci_probe(struct pci_dev *pdev,if (controller->setup) { r = controller->setup (pdev, controller); -if (r) { -pci_free_irq_vectors (pdev); +if (r)return r; - } }i2c_dw_adjust_bus_speed (dev);
@@ -307,10 +305,8 @@ static int i2c_dw_pci_probe(struct pci_dev *pdev,i2c_dw_acpi_configure (&pdev->dev); r =i2c_dw_validate_speed (dev); -if (r) { -pci_free_irq_vectors (pdev); +if (r)return r; - }i2c_dw_configure (dev);
@@ -330,10 +326,8 @@ static int i2c_dw_pci_probe(struct pci_dev *pdev, adap->nr = controller->bus_num; r =i2c_dw_probe (dev); -if (r) { -pci_free_irq_vectors (pdev); +if (r)return r; - }if ((dev->flags &MODEL_MASK ) ==MODEL_AMD_NAVI_GPU ) { dev->slave =i2c_new_ccgx_ucsi (&dev->adapter, dev->irq, &dgpu_node);
@@ -360,9 +354,6 @@ static void i2c_dw_pci_remove(struct pci_dev *pdev)pm_runtime_forbid (&pdev->dev);pm_runtime_get_noresume (&pdev->dev); - -devm_free_irq (&pdev->dev, dev->irq, dev); -pci_free_irq_vectors (pdev); }static const struct pci_device_id i2_designware_pci_ids[] = {
Signature · 1 line
2.43.0.rc1.1.gbec44491f096
Re: [PATCH v3 04/25] i2c: designware: Let PCI core to take care about interrupt vectors
Quoted 9 lines · Andy Shevchenko
PCI core, after
pcim_enable_device(), takes care about the allocated IRQ vectors, no need to do it explicitly and break the cleaning up order.Fixes 21aa3983d619 ("i2c: designware-pci: Switch over to MSI interrupts")Signed-off-by Andy Shevchenko <[email protected]>--- drivers/i2c/busses/i2c-designware-pcidrv.c | 15 +++------------ 1 file changed, 3 insertions(+), 12 deletions(-)
...
drivers/i2c/busses/i2c-designware-pcidrv.c static void i2c_dw_pci_remove(struct pci_dev *pdev) · line 365
Quoted 7 lines
drivers/i2c/busses/i2c-designware-pcidrv.c +0
-3@@ -360,9 +354,6 @@ static void i2c_dw_pci_remove(struct pci_dev *pdev)pm_runtime_forbid (&pdev->dev);pm_runtime_get_noresume (&pdev->dev); - -devm_free_irq (&pdev->dev, dev->irq, dev); -pci_free_irq_vectors (pdev);
Instead of commit 21aa3983d619 I guess this patch is more around my commit 9be8bc4dd617 ("i2c: designware-pci: Fix BUG_ON during device removal")? But still I don't think it qualifies Fixes tag?
I was curious to see would this patch bring back above BUG_ON and fortunately not (rmmod/modprobe i2c_designware_pci on MSI enabled instance):-)
Jarkko Nikula <[email protected]>
Andy Shevchenko
reviewerRe: [PATCH v3 04/25] i2c: designware: Let PCI core to take care about interrupt vectors
Quoted 1 line · Jarkko Nikula
On 11/10/23 20:11, Andy Shevchenko wrote:
...
Quoted 9 lines
drivers/i2c/busses/i2c-designware-pcidrv.c static void i2c_dw_pci_remove(struct pci_dev *pdev) · line 364
Quoted 6 lines
drivers/i2c/busses/i2c-designware-pcidrv.c +0
-3@@ -360,9 +354,6 @@ static void i2c_dw_pci_remove(struct pci_dev *pdev)pm_runtime_forbid (&pdev->dev);pm_runtime_get_noresume (&pdev->dev); - -devm_free_irq (&pdev->dev, dev->irq, dev); -pci_free_irq_vectors (pdev);Instead of commit
21aa3983d619I guess this patch is more around my commit9be8bc4dd617("i2c: designware-pci: FixBUG_ONduring device removal")?
No, this one exactly what it says. Your patch is the side effect of the above mentioned change.
Quoted 2 lines
But
still I don't think it qualifies Fixes tag?
Up to you, I can remove the fixes tag altogether, but it has the correct commit ID there.
Quoted 3 lines
I was curious to see would this patch bring back above
BUG_ONand fortunately not (rmmod/modprobei2c_designware_pcion MSI enabled instance):-)
How? PCI clean up will happen on the level of pcim_enable_device(), i.e. quite after the IRQ will be freed.
Signature · 2 lines
With Best Regards, Andy Shevchenko
Andy Shevchenko
reviewerPATCH v3 5/25 i2c: designware: Fix lock probe call order in dw_i2c_plat_probe()
In reply to Andy ShevchenkoWe should not mix managed calls with non-managed. This will break the calls order at the error path and ->remove() stages. Fix this by wrapping lock probe to become managed one.
--- drivers/i2c/busses/i2c-designware-platdrv.c | 24 ++++++++++----------- 1 file changed, 12 insertions(+), 12 deletions(-)
drivers/i2c/busses/i2c-designware-platdrv.c +12 -12
@@ -243,6 +243,17 @@ static const struct i2c_dw_semaphore_callbacks i2c_dw_semaphore_cb_table[] = { {} }; +static void i2c_dw_remove_lock_support (void *data) +{ +struct dw_i2c_dev *dev = data; + +if (dev->semaphore_idx <0 ) +return ; + +if (i2c_dw_semaphore_cb_table[dev->semaphore_idx].remove) + i2c_dw_semaphore_cb_table[dev->semaphore_idx].remove (dev); +} +static int i2c_dw_probe_lock_support (struct dw_i2c_dev *dev) {const struct i2c_dw_semaphore_callbacks *ptr;
@@ -273,16 +284,7 @@ static int i2c_dw_probe_lock_support(struct dw_i2c_dev *dev)break ; } -return 0 ; -} - -static void i2c_dw_remove_lock_support (struct dw_i2c_dev *dev) -{ -if (dev->semaphore_idx <0 ) -return ; - -if (i2c_dw_semaphore_cb_table[dev->semaphore_idx].remove) - i2c_dw_semaphore_cb_table[dev->semaphore_idx].remove (dev); +return devm_add_action_or_reset (dev->dev, i2c_dw_remove_lock_support, dev); }static void dw_i2c_plat_assert_reset (void *data)
@@ -428,8 +430,6 @@ static void dw_i2c_plat_remove(struct platform_device *pdev)pm_runtime_dont_use_autosuspend (&pdev->dev);pm_runtime_put_sync (&pdev->dev); - -i2c_dw_remove_lock_support (dev); }static int dw_i2c_plat_prepare (struct device *dev)
Signature · 1 line
2.43.0.rc1.1.gbec44491f096
Andy Shevchenko
reviewerPATCH v3 6/25 i2c: designware: Replace a while-loop by for-loop
In reply to Andy ShevchenkoReplace a while-loop by for-loop in i2c_dw_probe_lock_support() to save a few lines of code.
--- drivers/i2c/busses/i2c-designware-platdrv.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-)
drivers/i2c/busses/i2c-designware-platdrv.c +1 -4
@@ -260,11 +260,9 @@ static int i2c_dw_probe_lock_support(struct dw_i2c_dev *dev)int i =0 ;int ret; - ptr = i2c_dw_semaphore_cb_table; - dev->semaphore_idx =-1 ; -while (ptr->probe) { +for (ptr = i2c_dw_semaphore_cb_table; ptr->probe; ptr++) { ret = ptr->probe (dev);if (ret) {/*
@@ -276,7 +274,6 @@ static int i2c_dw_probe_lock_support(struct dw_i2c_dev *dev)return ret; i++; - ptr++;continue ; }
Signature · 1 line
2.43.0.rc1.1.gbec44491f096
Re: [PATCH v3 06/25] i2c: designware: Replace a while-loop by for-loop
Quoted 4 lines · Andy Shevchenko
Replace a while-loop by for-loop in
i2c_dw_probe_lock_support()to save a few lines of code.Signed-off-by Andy Shevchenko <[email protected]>
Quoted 29 lines
--- drivers/i2c/busses/i2c-designware-platdrv.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-)drivers/i2c/busses/i2c-designware-platdrv.c +1
-4@@ -260,11 +260,9 @@ static int i2c_dw_probe_lock_support(struct dw_i2c_dev *dev)int i =0 ;int ret; - ptr = i2c_dw_semaphore_cb_table; - dev->semaphore_idx =-1 ; -while (ptr->probe) { +for (ptr = i2c_dw_semaphore_cb_table; ptr->probe; ptr++) { ret = ptr->probe (dev);if (ret) {/* @@ -276,7 +274,6 @@ static int i2c_dw_probe_lock_support(struct dw_i2c_dev *dev)return ret; i++; - ptr++;continue ; }
Re: [PATCH v3 06/25] i2c: designware: Replace a while-loop by for-loop
In reply to Andy ShevchenkoQuoted 8 lines · Andy Shevchenko
Replace a while-loop by for-loop in
i2c_dw_probe_lock_support()to save a few lines of code.Signed-off-by Andy Shevchenko <[email protected]>--- drivers/i2c/busses/i2c-designware-platdrv.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-)
Andy Shevchenko
reviewerPATCH v3 7/25 i2c: designware: Save pointer to semaphore callbacks instead of index
In reply to Andy ShevchenkoInstead of saving index and do an additional level of referencing, save just a pointer to the semaphore callbacks directly. It makes code cleaner.
--- drivers/i2c/busses/i2c-designware-core.h | 4 +++- drivers/i2c/busses/i2c-designware-platdrv.c | 12 ++++-------- 2 files changed, 7 insertions(+), 9 deletions(-)
drivers/i2c/busses/i2c-designware-core.h +3 -1
@@ -187,6 +187,8 @@ struct clk;struct device ;struct reset_control ; +struct i2c_dw_semaphore_callbacks ; +/** * struct dw_i2c_dev - private i2c-designware data * @dev: driver model device node
@@ -291,7 +293,7 @@ struct dw_i2c_dev {u16 hs_lcnt;int (*acquire_lock)(void );void (*release_lock)(void ); -int semaphore_idx; +const struct i2c_dw_semaphore_callbacks *semaphore_cb;bool shared_with_punit;void (*disable)(struct dw_i2c_dev *dev);int (*init)(struct dw_i2c_dev *dev);
drivers/i2c/busses/i2c-designware-platdrv.c +4 -8
@@ -247,21 +247,18 @@ static void i2c_dw_remove_lock_support(void *data) {struct dw_i2c_dev *dev = data; -if (dev->semaphore_idx <0 ) +if (!dev->semaphore_cb)return ; -if (i2c_dw_semaphore_cb_table[dev->semaphore_idx].remove) - i2c_dw_semaphore_cb_table[dev->semaphore_idx].remove (dev); +if (dev->semaphore_cb->remove) + dev->semaphore_cb->remove (dev); }static int i2c_dw_probe_lock_support (struct dw_i2c_dev *dev) {const struct i2c_dw_semaphore_callbacks *ptr; -int i =0 ;int ret; - dev->semaphore_idx =-1 ; -for (ptr = i2c_dw_semaphore_cb_table; ptr->probe; ptr++) { ret = ptr->probe (dev);if (ret) {
@@ -273,11 +270,10 @@ static int i2c_dw_probe_lock_support(struct dw_i2c_dev *dev)if (ret != -ENODEV )return ret; - i++;continue ; } - dev->semaphore_idx = i; + dev->semaphore_cb = ptr;break ; }
Signature · 1 line
2.43.0.rc1.1.gbec44491f096
Re: [PATCH v3 07/25] i2c: designware: Save pointer to semaphore callbacks instead of index
Quoted 10 lines · Andy Shevchenko
Instead of saving index and do an additional level of referencing, save just a pointer to the semaphore callbacks directly. It makes code cleaner.
Signed-off-by Andy Shevchenko <[email protected]>--- drivers/i2c/busses/i2c-designware-core.h | 4 +++- drivers/i2c/busses/i2c-designware-platdrv.c | 12 ++++-------- 2 files changed, 7 insertions(+), 9 deletions(-)
Andy Shevchenko
reviewerPATCH v3 8/25 i2c: designware: Add missing 'c' into PCI IDs variable name
In reply to Andy ShevchenkoAdd missing 'c' into i2c_designware_pci_ids variable name.
--- drivers/i2c/busses/i2c-designware-pcidrv.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
drivers/i2c/busses/i2c-designware-pcidrv.c +3 -3
@@ -356,7 +356,7 @@ static void i2c_dw_pci_remove(struct pci_dev *pdev)pm_runtime_get_noresume (&pdev->dev); } -static const struct pci_device_id i2_designware_pci_ids[] = { +static const struct pci_device_id i2c_designware_pci_ids[] = {/* Medfield */ {PCI_VDEVICE (INTEL ,0x0817 ), medfield }, {PCI_VDEVICE (INTEL ,0x0818 ), medfield },
@@ -404,16 +404,16 @@ static const struct pci_device_id i2_designware_pci_ids[] = { { PCI_VDEVICE(ATI, 0x7464), navi_amd }, { 0,} }; -MODULE_DEVICE_TABLE (pci, i2_designware_pci_ids); +MODULE_DEVICE_TABLE (pci, i2c_designware_pci_ids);static struct pci_driver dw_i2c_driver = { .name =DRIVER_NAME , - .id_table = i2_designware_pci_ids, .probe = i2c_dw_pci_probe, .remove = i2c_dw_pci_remove, .driver = { .pm = &i2c_dw_pm_ops, }, + .id_table = i2c_designware_pci_ids, };module_pci_driver (dw_i2c_driver);
Signature · 1 line
2.43.0.rc1.1.gbec44491f096
Re: [PATCH v3 08/25] i2c: designware: Add missing 'c' into PCI IDs variable name
Quoted 7 lines · Andy Shevchenko
Add missing 'c' into
i2c_designware_pci_idsvariable name.Signed-off-by Andy Shevchenko <[email protected]>--- drivers/i2c/busses/i2c-designware-pcidrv.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
Andy Shevchenko
reviewerPATCH v3 9/25 i2c: designware: Replace MODULE_ALIAS() with MODULE_DEVICE_TABLE()
In reply to Andy ShevchenkoAs Krzysztof Kozlowski pointed out the better is to use MODULE_DEVICE_TABLE() as it will be consistent with the content of the real ID table of the platform devices.
While at it, drop unneeded and unused module alias in PCI glue driver as PCI already has its own ID table and automatic loading should just work.
--- drivers/i2c/busses/i2c-designware-pcidrv.c | 2 -- drivers/i2c/busses/i2c-designware-platdrv.c | 8 ++++++-- 2 files changed, 6 insertions(+), 4 deletions(-)
drivers/i2c/busses/i2c-designware-pcidrv.c +0 -2
@@ -417,8 +417,6 @@ static struct pci_driver dw_i2c_driver = { };module_pci_driver (dw_i2c_driver); -/* Work with hotplug and coldplug */ -MODULE_ALIAS ("i2c_designware-pci" );MODULE_AUTHOR ("Baruch Siach <[email protected]>" );MODULE_DESCRIPTION ("Synopsys DesignWare PCI I2C bus adapter" );MODULE_LICENSE ("GPL" );
drivers/i2c/busses/i2c-designware-platdrv.c +6 -2
@@ -486,8 +486,11 @@ static const struct dev_pm_ops dw_i2c_dev_pm_ops = {RUNTIME_PM_OPS (dw_i2c_plat_runtime_suspend, dw_i2c_plat_runtime_resume,NULL ) }; -/* Work with hotplug and coldplug */ -MODULE_ALIAS ("platform:i2c_designware" ); +static const struct platform_device_id dw_i2c_platform_ids[] = { + {"i2c_designware" }, + {} +}; +MODULE_DEVICE_TABLE (platform, dw_i2c_platform_ids);static struct platform_driver dw_i2c_driver = { .probe = dw_i2c_plat_probe,
@@ -498,6 +501,7 @@ static struct platform_driver dw_i2c_driver = { .acpi_match_table = ACPI_PTR(dw_i2c_acpi_match), .pm = pm_ptr(&dw_i2c_dev_pm_ops), }, + .id_table = dw_i2c_platform_ids, };static int __init dw_i2c_init_driver (void )
Signature · 1 line
2.43.0.rc1.1.gbec44491f096
Re: [PATCH v3 09/25] i2c: designware: Replace MODULE_ALIAS() with MODULE_DEVICE_TABLE()
Quoted 10 lines · Andy Shevchenko
As Krzysztof Kozlowski pointed out the better is to use
MODULE_DEVICE_TABLE()as it will be consistent with the content of the real ID table of the platform devices.While at it, drop unneeded and unused module alias in PCI glue driver as PCI already has its own ID table and automatic loading should just work.
Reviewed-by Andi Shyti <[email protected]>Signed-off-by Andy Shevchenko <[email protected]>
Quoted 44 lines
--- drivers/i2c/busses/i2c-designware-pcidrv.c | 2 -- drivers/i2c/busses/i2c-designware-platdrv.c | 8 ++++++-- 2 files changed, 6 insertions(+), 4 deletions(-)drivers/i2c/busses/i2c-designware-pcidrv.c +0
-2@@ -417,8 +417,6 @@ static struct pci_driver dw_i2c_driver = { };module_pci_driver (dw_i2c_driver); -/* Work with hotplug and coldplug */ -MODULE_ALIAS ("i2c_designware-pci" );MODULE_AUTHOR ("Baruch Siach <[email protected]>" );MODULE_DESCRIPTION ("Synopsys DesignWare PCI I2C bus adapter" );MODULE_LICENSE ("GPL" );drivers/i2c/busses/i2c-designware-platdrv.c +6
-2@@ -486,8 +486,11 @@ static const struct dev_pm_ops dw_i2c_dev_pm_ops = {RUNTIME_PM_OPS (dw_i2c_plat_runtime_suspend, dw_i2c_plat_runtime_resume,NULL ) }; -/* Work with hotplug and coldplug */ -MODULE_ALIAS ("platform:i2c_designware" ); +static const struct platform_device_id dw_i2c_platform_ids[] = { + {"i2c_designware" }, + {} +}; +MODULE_DEVICE_TABLE (platform, dw_i2c_platform_ids);static struct platform_driver dw_i2c_driver = { .probe = dw_i2c_plat_probe,@@ -498,6 +501,7 @@ static struct platform_driver dw_i2c_driver = { .acpi_match_table = ACPI_PTR(dw_i2c_acpi_match), .pm = pm_ptr(&dw_i2c_dev_pm_ops), }, + .id_table = dw_i2c_platform_ids, };static int __init dw_i2c_init_driver (void )
Re: [PATCH v3 09/25] i2c: designware: Replace MODULE_ALIAS() with MODULE_DEVICE_TABLE()
Quoted 5 lines · Mario Limonciello
Quoted 4 lines · Andy Shevchenko
As Krzysztof Kozlowski pointed out the better is to use
MODULE_DEVICE_TABLE()as it will be consistent with the content of the real ID table of the platform devices.
Quoted 7 lines
Quoted 6 lines
While at it, drop unneeded and unused module alias in PCI glue driver as PCI already has its own ID table and automatic loading should just work.
Reviewed-by Andi Shyti <[email protected]>Signed-off-by Andy Shevchenko <[email protected]>Reviewed-by Mario Limonciello <[email protected]>
I'm using modular build and modules get autoloaded fine after this patch.
Andy Shevchenko
reviewerPATCH v3 10/25 i2c: designware: Unify terminator in device ID tables
In reply to Andy ShevchenkoMake the terminator entry look the same in all device ID tables.
--- drivers/i2c/busses/i2c-designware-pcidrv.c | 2 +- drivers/i2c/busses/i2c-designware-platdrv.c | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-)
drivers/i2c/busses/i2c-designware-pcidrv.c +1 -1
@@ -402,7 +402,7 @@ static const struct pci_device_id i2c_designware_pci_ids[] = { { PCI_VDEVICE(ATI, 0x73c4), navi_amd }, { PCI_VDEVICE(ATI, 0x7444), navi_amd }, { PCI_VDEVICE(ATI, 0x7464), navi_amd }, - { 0,} + {} };MODULE_DEVICE_TABLE (pci, i2c_designware_pci_ids);
drivers/i2c/busses/i2c-designware-platdrv.c +2 -2
@@ -57,7 +57,7 @@ static const struct acpi_device_id dw_i2c_acpi_match[] = { { "HISI02A2", 0 }, { "HISI02A3", 0 }, { "HYGO0010", ACCESS_INTR_MASK }, - { } + {} }; MODULE_DEVICE_TABLE(acpi, dw_i2c_acpi_match); #endif
@@ -153,7 +153,7 @@ static const struct of_device_id dw_i2c_of_match[] = { { .compatible = "snps,designware-i2c", }, { .compatible = "mscc,ocelot-i2c", .data = (void *)MODEL_MSCC_OCELOT }, { .compatible = "baikal,bt1-sys-i2c", .data = (void *)MODEL_BAIKAL_BT1 }, - {}, + {} }; MODULE_DEVICE_TABLE(of, dw_i2c_of_match); #else
Signature · 1 line
2.43.0.rc1.1.gbec44491f096
Re: [PATCH v3 10/25] i2c: designware: Unify terminator in device ID tables
Quoted 3 lines · Andy Shevchenko
Make the terminator entry look the same in all device ID tables.
Signed-off-by Andy Shevchenko <[email protected]>
Quoted 40 lines
--- drivers/i2c/busses/i2c-designware-pcidrv.c | 2 +- drivers/i2c/busses/i2c-designware-platdrv.c | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-)drivers/i2c/busses/i2c-designware-pcidrv.c +1
-1@@ -402,7 +402,7 @@ static const struct pci_device_id i2c_designware_pci_ids[] = { { PCI_VDEVICE(ATI, 0x73c4), navi_amd }, { PCI_VDEVICE(ATI, 0x7444), navi_amd }, { PCI_VDEVICE(ATI, 0x7464), navi_amd }, - { 0,} + {} };MODULE_DEVICE_TABLE (pci, i2c_designware_pci_ids);drivers/i2c/busses/i2c-designware-platdrv.c +2
-2@@ -57,7 +57,7 @@ static const struct acpi_device_id dw_i2c_acpi_match[] = { { "HISI02A2", 0 }, { "HISI02A3", 0 }, { "HYGO0010", ACCESS_INTR_MASK }, - { } + {} }; MODULE_DEVICE_TABLE(acpi, dw_i2c_acpi_match); #endif@@ -153,7 +153,7 @@ static const struct of_device_id dw_i2c_of_match[] = { { .compatible = "snps,designware-i2c", }, { .compatible = "mscc,ocelot-i2c", .data = (void *)MODEL_MSCC_OCELOT }, { .compatible = "baikal,bt1-sys-i2c", .data = (void *)MODEL_BAIKAL_BT1 }, - {}, + {} }; MODULE_DEVICE_TABLE(of, dw_i2c_of_match); #else
Jarkko Nikula
Acked-byRe: [PATCH v3 10/25] i2c: designware: Unify terminator in device ID tables
Quoted 5 lines · Mario Limonciello
Quoted 3 lines · Andy Shevchenko
Make the terminator entry look the same in all device ID tables.
Signed-off-by Andy Shevchenko <[email protected]>Reviewed-by Mario Limonciello <[email protected]>
Sorry replying twice, wanted to make sure Mario's tag is noted.
Andy Shevchenko
reviewerRe: [PATCH v3 10/25] i2c: designware: Unify terminator in device ID tables
Quoted 8 lines · Jarkko Nikula
Quoted 5 lines · Mario Limonciello
Quoted 3 lines · Andy Shevchenko
Make the terminator entry look the same in all device ID tables.
Signed-off-by Andy Shevchenko <[email protected]>Reviewed-by Mario Limonciello <[email protected]>Sorry replying twice, wanted to make sure Mario's tag is noted.
I am using b4, it collects tags from the entire thread (each email from it), so no need to send twice or care about other's tags).
Quoted 1 line
Acked-by Jarkko Nikula <[email protected]>
Thank you for the review!
Signature · 2 lines
With Best Regards, Andy Shevchenko
Re: [PATCH v3 10/25] i2c: designware: Unify terminator in device ID tables
In reply to Andy ShevchenkoQuoted 8 lines · Andy Shevchenko
Make the terminator entry look the same in all device ID tables.
Signed-off-by Andy Shevchenko <[email protected]>--- drivers/i2c/busses/i2c-designware-pcidrv.c | 2 +- drivers/i2c/busses/i2c-designware-platdrv.c | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-)
Andy Shevchenko
reviewerPATCH v3 11/25 i2c: designware: Always provide device ID tables
In reply to Andy ShevchenkoThere is no need to have ugly ifdeffery and additional macros for the device ID tables. Always provide them. Since we touch the ACPI table, make it sorted by ID.
--- drivers/i2c/busses/i2c-designware-platdrv.c | 62 ++++++++++----------- 1 file changed, 30 insertions(+), 32 deletions(-)
drivers/i2c/busses/i2c-designware-platdrv.c +30 -32
@@ -40,28 +40,6 @@ static u32 i2c_dw_get_clk_rate_khz(struct dw_i2c_dev *dev)return clk_get_rate (dev->clk) /KILO ; } -#ifdef CONFIG_ACPI -static const struct acpi_device_id dw_i2c_acpi_match[] = { - {"INT33C2" ,0 }, - {"INT33C3" ,0 }, - {"INT3432" ,0 }, - {"INT3433" ,0 }, - {"80860F41" ,ACCESS_NO_IRQ_SUSPEND }, - {"808622C1" ,ACCESS_NO_IRQ_SUSPEND }, - {"AMD0010" ,ACCESS_INTR_MASK }, - {"AMDI0010" ,ACCESS_INTR_MASK }, - {"AMDI0019" ,ACCESS_INTR_MASK |ARBITRATION_SEMAPHORE }, - {"AMDI0510" ,0 }, - {"APMC0D0F" ,0 }, - {"HISI02A1" ,0 }, - {"HISI02A2" ,0 }, - {"HISI02A3" ,0 }, - {"HYGO0010" ,ACCESS_INTR_MASK }, - {} -}; -MODULE_DEVICE_TABLE (acpi, dw_i2c_acpi_match); -#endif -#ifdef CONFIG_OF #define BT1_I2C_CTL 0x100#define BT1_I2C_CTL_ADDR_MASK GENMASK(7, 0)
@@ -148,14 +126,6 @@ static int dw_i2c_of_configure(struct platform_device *pdev) return 0; } - -static const struct of_device_id dw_i2c_of_match[] = { - { .compatible ="snps,designware-i2c" , }, - { .compatible ="mscc,ocelot-i2c" , .data = (void *)MODEL_MSCC_OCELOT }, - { .compatible ="baikal,bt1-sys-i2c" , .data = (void *)MODEL_BAIKAL_BT1 }, - {} -}; -MODULE_DEVICE_TABLE (of, dw_i2c_of_match);#else static int bt1_i2c_request_regs (struct dw_i2c_dev *dev) {
@@ -486,6 +456,34 @@ static const struct dev_pm_ops dw_i2c_dev_pm_ops = {RUNTIME_PM_OPS (dw_i2c_plat_runtime_suspend, dw_i2c_plat_runtime_resume,NULL ) }; +static const struct of_device_id dw_i2c_of_match[] = { + { .compatible ="snps,designware-i2c" , }, + { .compatible ="mscc,ocelot-i2c" , .data = (void *)MODEL_MSCC_OCELOT }, + { .compatible ="baikal,bt1-sys-i2c" , .data = (void *)MODEL_BAIKAL_BT1 }, + {} +}; +MODULE_DEVICE_TABLE (of, dw_i2c_of_match); + +static const struct acpi_device_id dw_i2c_acpi_match[] = { + {"80860F41" ,ACCESS_NO_IRQ_SUSPEND }, + {"808622C1" ,ACCESS_NO_IRQ_SUSPEND }, + {"AMD0010" ,ACCESS_INTR_MASK }, + {"AMDI0010" ,ACCESS_INTR_MASK }, + {"AMDI0019" ,ACCESS_INTR_MASK |ARBITRATION_SEMAPHORE }, + {"AMDI0510" ,0 }, + {"APMC0D0F" ,0 }, + {"HISI02A1" ,0 }, + {"HISI02A2" ,0 }, + {"HISI02A3" ,0 }, + {"HYGO0010" ,ACCESS_INTR_MASK }, + {"INT33C2" ,0 }, + {"INT33C3" ,0 }, + {"INT3432" ,0 }, + {"INT3433" ,0 }, + {} +}; +MODULE_DEVICE_TABLE (acpi, dw_i2c_acpi_match); +static const struct platform_device_id dw_i2c_platform_ids[] = { {"i2c_designware" }, {}
@@ -497,8 +495,8 @@ static struct platform_driver dw_i2c_driver = { .remove_new = dw_i2c_plat_remove, .driver = { .name = "i2c_designware", - .of_match_table = of_match_ptr(dw_i2c_of_match), - .acpi_match_table = ACPI_PTR(dw_i2c_acpi_match), + .of_match_table = dw_i2c_of_match, + .acpi_match_table = dw_i2c_acpi_match, .pm = pm_ptr(&dw_i2c_dev_pm_ops), }, .id_table = dw_i2c_platform_ids,
Signature · 1 line
2.43.0.rc1.1.gbec44491f096
Andy Shevchenko
reviewerPATCH v3 12/25 i2c: designware: Drop return value from i2c_dw_acpi_configure()
In reply to Andy Shevchenkoi2c_dw_acpi_configure() is called without checking of the returned value, hence just drop it by converting to void.
--- drivers/i2c/busses/i2c-designware-common.c | 4 +--- drivers/i2c/busses/i2c-designware-core.h | 4 ++-- 2 files changed, 3 insertions(+), 5 deletions(-)
drivers/i2c/busses/i2c-designware-common.c +1 -3
@@ -255,7 +255,7 @@ static void i2c_dw_acpi_params(struct device *device, char method[],kfree (buf.pointer); } -int i2c_dw_acpi_configure (struct device *device) +void i2c_dw_acpi_configure (struct device *device) {struct dw_i2c_dev *dev =dev_get_drvdata (device);struct i2c_timings *t = &dev->timings;
@@ -285,8 +285,6 @@ int i2c_dw_acpi_configure(struct device *device) dev->sda_hold_time = fs_ht;break ; } - -return 0 ; }EXPORT_SYMBOL_GPL (i2c_dw_acpi_configure);
drivers/i2c/busses/i2c-designware-core.h +2 -2
@@ -399,7 +399,7 @@ int i2c_dw_validate_speed(struct dw_i2c_dev *dev);void i2c_dw_adjust_bus_speed (struct dw_i2c_dev *dev);#if IS_ENABLED (CONFIG_ACPI ) -int i2c_dw_acpi_configure (struct device *device); +void i2c_dw_acpi_configure (struct device *device);#else -static inline int i2c_dw_acpi_configure (struct device *device) {return -ENODEV ; } +static inline void i2c_dw_acpi_configure (struct device *device) { }#endif
Signature · 1 line
2.43.0.rc1.1.gbec44491f096
Re: [PATCH v3 12/25] i2c: designware: Drop return value from i2c_dw_acpi_configure()
Quoted 10 lines · Andy Shevchenko
i2c_dw_acpi_configure()is called without checking of the returned value, hence just drop it by converting to void.Reviewed-by Andi Shyti <[email protected]>Signed-off-by Andy Shevchenko <[email protected]>--- drivers/i2c/busses/i2c-designware-common.c | 4 +--- drivers/i2c/busses/i2c-designware-core.h | 4 ++-- 2 files changed, 3 insertions(+), 5 deletions(-)
Andy Shevchenko
reviewerPATCH v3 13/25 i2c: designware: Drop return value from dw_i2c_of_configure()
In reply to Andy Shevchenkodw_i2c_of_configure() is called without checking of the returned value, hence just drop it by converting to void.
--- drivers/i2c/busses/i2c-designware-platdrv.c | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-)
drivers/i2c/busses/i2c-designware-platdrv.c +2 -5
@@ -110,7 +110,7 @@ static int mscc_twi_set_sda_hold_time(struct dw_i2c_dev *dev)return 0 ; } -static int dw_i2c_of_configure (struct platform_device *pdev) +static void dw_i2c_of_configure (struct platform_device *pdev) {struct dw_i2c_dev *dev =platform_get_drvdata (pdev);
@@ -123,8 +123,6 @@ static int dw_i2c_of_configure(struct platform_device *pdev)default : break; } - -return 0 ; }#else static int bt1_i2c_request_regs (struct dw_i2c_dev *dev)
@@ -132,9 +130,8 @@ static int bt1_i2c_request_regs(struct dw_i2c_dev *dev) return -ENODEV; } -static inline int dw_i2c_of_configure (struct platform_device *pdev) +static inline void dw_i2c_of_configure (struct platform_device *pdev) { -return -ENODEV ; }#endif
Signature · 1 line
2.43.0.rc1.1.gbec44491f096
Re: [PATCH v3 13/25] i2c: designware: Drop return value from dw_i2c_of_configure()
Quoted 5 lines · Andy Shevchenko
dw_i2c_of_configure()is called without checking of the returned value, hence just drop it by converting to void.Reviewed-by Andi Shyti <[email protected]>Signed-off-by Andy Shevchenko <[email protected]>
Quoted 37 lines
--- drivers/i2c/busses/i2c-designware-platdrv.c | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-)drivers/i2c/busses/i2c-designware-platdrv.c +2
-5@@ -110,7 +110,7 @@ static int mscc_twi_set_sda_hold_time(struct dw_i2c_dev *dev)return 0 ; } -static int dw_i2c_of_configure (struct platform_device *pdev) +static void dw_i2c_of_configure (struct platform_device *pdev) {struct dw_i2c_dev *dev =platform_get_drvdata (pdev);@@ -123,8 +123,6 @@ static int dw_i2c_of_configure(struct platform_device *pdev)default : break; } - -return 0 ; }#else static int bt1_i2c_request_regs (struct dw_i2c_dev *dev)@@ -132,9 +130,8 @@ static int bt1_i2c_request_regs(struct dw_i2c_dev *dev) return -ENODEV; } -static inline int dw_i2c_of_configure (struct platform_device *pdev) +static inline void dw_i2c_of_configure (struct platform_device *pdev) { -return -ENODEV ; }#endif
Jarkko Nikula
Acked-byRe: [PATCH v3 13/25] i2c: designware: Drop return value from dw_i2c_of_configure()
Quoted 11 lines · Mario Limonciello
Quoted 5 lines · Andy Shevchenko
dw_i2c_of_configure()is called without checking of the returned value, hence just drop it by converting to void.Reviewed-by Andi Shyti <[email protected]>Signed-off-by Andy Shevchenko <[email protected]>Reviewed-by Mario Limonciello <[email protected]>Quoted 4 lines
---
drivers/i2c/busses/i2c-designware-platdrv.c| 7 ++-----1 file changed, 2 insertions(+), 5 deletions(-)
Andy Shevchenko
reviewerPATCH v3 14/25 i2c: designware: Rename dw_i2c_of_configure() -> i2c_dw_of_configure()
In reply to Andy ShevchenkoFor the sake of consistency, rename dw_i2c_of_configure() and change its parameter to be aligned with the i2c_dw_acpi_configure().
--- drivers/i2c/busses/i2c-designware-platdrv.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-)
drivers/i2c/busses/i2c-designware-platdrv.c +5 -4
@@ -110,9 +110,10 @@ static int mscc_twi_set_sda_hold_time(struct dw_i2c_dev *dev)return 0 ; } -static void dw_i2c_of_configure (struct platform_device *pdev) +static void i2c_dw_of_configure (struct device *device) { -struct dw_i2c_dev *dev =platform_get_drvdata (pdev); +struct platform_device *pdev =to_platform_device (device); +struct dw_i2c_dev *dev =dev_get_drvdata (device);switch (dev->flags &MODEL_MASK ) {case MODEL_MSCC_OCELOT :
@@ -130,7 +131,7 @@ static int bt1_i2c_request_regs(struct dw_i2c_dev *dev) return -ENODEV; } -static inline void dw_i2c_of_configure (struct platform_device *pdev) +static inline void i2c_dw_of_configure (struct device *device) { }#endif
@@ -306,7 +307,7 @@ static int dw_i2c_plat_probe(struct platform_device *pdev)i2c_dw_adjust_bus_speed (dev);if (pdev->dev.of_node) -dw_i2c_of_configure (pdev); +i2c_dw_of_configure (&pdev->dev);if (has_acpi_companion (&pdev->dev))i2c_dw_acpi_configure (&pdev->dev);
Signature · 1 line
2.43.0.rc1.1.gbec44491f096
Re: [PATCH v3 14/25] i2c: designware: Rename dw_i2c_of_configure() -> i2c_dw_of_configure()
Quoted 5 lines · Andy Shevchenko
For the sake of consistency, rename
dw_i2c_of_configure()and change its parameter to be aligned with thei2c_dw_acpi_configure().Reviewed-by Andi Shyti <[email protected]>Signed-off-by Andy Shevchenko <[email protected]>
Quoted 39 lines
--- drivers/i2c/busses/i2c-designware-platdrv.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-)drivers/i2c/busses/i2c-designware-platdrv.c +5
-4@@ -110,9 +110,10 @@ static int mscc_twi_set_sda_hold_time(struct dw_i2c_dev *dev)return 0 ; } -static void dw_i2c_of_configure (struct platform_device *pdev) +static void i2c_dw_of_configure (struct device *device) { -struct dw_i2c_dev *dev =platform_get_drvdata (pdev); +struct platform_device *pdev =to_platform_device (device); +struct dw_i2c_dev *dev =dev_get_drvdata (device);switch (dev->flags &MODEL_MASK ) {case MODEL_MSCC_OCELOT :@@ -130,7 +131,7 @@ static int bt1_i2c_request_regs(struct dw_i2c_dev *dev) return -ENODEV; } -static inline void dw_i2c_of_configure (struct platform_device *pdev) +static inline void i2c_dw_of_configure (struct device *device) { }#endif @@ -306,7 +307,7 @@ static int dw_i2c_plat_probe(struct platform_device *pdev)i2c_dw_adjust_bus_speed (dev);if (pdev->dev.of_node) -dw_i2c_of_configure (pdev); +i2c_dw_of_configure (&pdev->dev);if (has_acpi_companion (&pdev->dev))i2c_dw_acpi_configure (&pdev->dev);
Jarkko Nikula
Acked-byRe: [PATCH v3 14/25] i2c: designware: Rename dw_i2c_of_configure() -> i2c_dw_of_configure()
Quoted 11 lines · Mario Limonciello
Quoted 5 lines · Andy Shevchenko
For the sake of consistency, rename
dw_i2c_of_configure()and change its parameter to be aligned with thei2c_dw_acpi_configure().Reviewed-by Andi Shyti <[email protected]>Signed-off-by Andy Shevchenko <[email protected]>Reviewed-by Mario Limonciello <[email protected]>Quoted 4 lines
---
drivers/i2c/busses/i2c-designware-platdrv.c| 9 +++++----1 file changed, 5 insertions(+), 4 deletions(-)
Andy Shevchenko
reviewerPATCH v3 15/25 i2c: designware: Consolidate firmware parsing and configuring code
In reply to Andy ShevchenkoWe have the same code flows in the PCI and plaform drivers. Moreover, the flow requires the common code to export a few functions. Instead, consolidate that flow under new function called i2c_dw_fw_parse_and_configure() and drop unneeded exports.
--- drivers/i2c/busses/i2c-designware-common.c | 68 +++++++++++++++++++-- drivers/i2c/busses/i2c-designware-core.h | 9 +-- drivers/i2c/busses/i2c-designware-pcidrv.c | 11 +--- drivers/i2c/busses/i2c-designware-platdrv.c | 48 +-------------- 4 files changed, 66 insertions(+), 70 deletions(-)
drivers/i2c/busses/i2c-designware-common.c +62 -6
@@ -20,6 +20,7 @@#include <linux/io.h> #include <linux/kernel.h> #include <linux/module.h> +#include <linux/of.h> #include <linux/pm_runtime.h> #include <linux/regmap.h> #include <linux/swab.h>
@@ -188,7 +189,7 @@ static const u32 supported_speeds[] = { I2C_MAX_STANDARD_MODE_FREQ, }; -int i2c_dw_validate_speed (struct dw_i2c_dev *dev) +static int i2c_dw_validate_speed (struct dw_i2c_dev *dev) {struct i2c_timings *t = &dev->timings;unsigned int i;
@@ -208,7 +209,44 @@ int i2c_dw_validate_speed(struct dw_i2c_dev *dev)return -EINVAL ; } -EXPORT_SYMBOL_GPL (i2c_dw_validate_speed); + +#ifdef CONFIG_OF + +#include <linux/platform_device.h> + +#define MSCC_ICPU_CFG_TWI_DELAY 0x0 +#define MSCC_ICPU_CFG_TWI_DELAY_ENABLE BIT(0) +#define MSCC_ICPU_CFG_TWI_SPIKE_FILTER 0x4 + +static int mscc_twi_set_sda_hold_time (struct dw_i2c_dev *dev) +{ +writel ((dev->sda_hold_time <<1 ) |MSCC_ICPU_CFG_TWI_DELAY_ENABLE , + dev->ext +MSCC_ICPU_CFG_TWI_DELAY ); + +return 0 ; +} + +static void i2c_dw_of_configure (struct device *device) +{ +struct platform_device *pdev =to_platform_device (device); +struct dw_i2c_dev *dev =dev_get_drvdata (device); + +switch (dev->flags &MODEL_MASK ) { +case MODEL_MSCC_OCELOT : + dev->ext =devm_platform_ioremap_resource (pdev,1 ); +if (!IS_ERR (dev->ext)) + dev->set_sda_hold_time = mscc_twi_set_sda_hold_time; +break ; +default : +break ; + } +} + +#else /* CONFIG_OF */ + +static inline void i2c_dw_of_configure (struct device *device) { } + +#endif /* CONFIG_OF */ #ifdef CONFIG_ACPI
@@ -255,7 +293,7 @@ static void i2c_dw_acpi_params(struct device *device, char method[],kfree (buf.pointer); } -void i2c_dw_acpi_configure (struct device *device) +static void i2c_dw_acpi_configure (struct device *device) {struct dw_i2c_dev *dev =dev_get_drvdata (device);struct i2c_timings *t = &dev->timings;
@@ -286,7 +324,6 @@ void i2c_dw_acpi_configure(struct device *device)break ; } } -EXPORT_SYMBOL_GPL (i2c_dw_acpi_configure);static u32 i2c_dw_acpi_round_bus_speed (struct device *device) {
@@ -308,11 +345,13 @@ static u32 i2c_dw_acpi_round_bus_speed(struct device *device)#else /* CONFIG_ACPI */ +static inline void i2c_dw_acpi_configure (struct device *device) { } +static inline u32 i2c_dw_acpi_round_bus_speed (struct device *device) {return 0 ; }#endif /* CONFIG_ACPI */ -void i2c_dw_adjust_bus_speed (struct dw_i2c_dev *dev) +static void i2c_dw_adjust_bus_speed (struct dw_i2c_dev *dev) {u32 acpi_speed =i2c_dw_acpi_round_bus_speed (dev->dev);struct i2c_timings *t = &dev->timings;
@@ -328,7 +367,24 @@ void i2c_dw_adjust_bus_speed(struct dw_i2c_dev *dev)else t->bus_freq_hz =I2C_MAX_FAST_MODE_FREQ ; } -EXPORT_SYMBOL_GPL (i2c_dw_adjust_bus_speed); + +int i2c_dw_fw_parse_and_configure (struct dw_i2c_dev *dev) +{ +struct i2c_timings *t = &dev->timings; +struct device *device = dev->dev; + +i2c_parse_fw_timings (device, t, false); + +i2c_dw_adjust_bus_speed (dev); + +if (device->of_node) +i2c_dw_of_configure (device); +if (has_acpi_companion (device)) +i2c_dw_acpi_configure (device); + +return i2c_dw_validate_speed (dev); +} +EXPORT_SYMBOL_GPL (i2c_dw_fw_parse_and_configure);u32 i2c_dw_scl_hcnt (u32 ic_clk,u32 tSYMBOL,u32 tf,int cond,int offset) {
drivers/i2c/busses/i2c-designware-core.h +1 -8
@@ -395,11 +395,4 @@ int i2c_dw_baytrail_probe_lock_support(struct dw_i2c_dev *dev);int i2c_dw_amdpsp_probe_lock_support (struct dw_i2c_dev *dev);#endif -int i2c_dw_validate_speed (struct dw_i2c_dev *dev); -void i2c_dw_adjust_bus_speed (struct dw_i2c_dev *dev); - -#if IS_ENABLED (CONFIG_ACPI ) -void i2c_dw_acpi_configure (struct device *device); -#else -static inline void i2c_dw_acpi_configure (struct device *device) { } -#endif +int i2c_dw_fw_parse_and_configure (struct dw_i2c_dev *dev);
drivers/i2c/busses/i2c-designware-pcidrv.c +1 -10
@@ -253,7 +253,6 @@ static int i2c_dw_pci_probe(struct pci_dev *pdev,int r;struct dw_pci_controller *controller;struct dw_scl_sda_cfg *cfg; -struct i2c_timings *t;if (id->driver_data >=ARRAY_SIZE (dw_pci_controllers)) return dev_err_probe(&pdev->dev, -EINVAL,
@@ -288,9 +287,6 @@ static int i2c_dw_pci_probe(struct pci_dev *pdev, dev->irq =pci_irq_vector (pdev,0 ); dev->flags |= controller->flags; - t = &dev->timings; -i2c_parse_fw_timings (&pdev->dev, t, false); -pci_set_drvdata (pdev, dev);if (controller->setup) {
@@ -299,12 +295,7 @@ static int i2c_dw_pci_probe(struct pci_dev *pdev,return r; } -i2c_dw_adjust_bus_speed (dev); - -if (has_acpi_companion (&pdev->dev)) -i2c_dw_acpi_configure (&pdev->dev); - - r =i2c_dw_validate_speed (dev); + r =i2c_dw_fw_parse_and_configure (dev);if (r)return r;
drivers/i2c/busses/i2c-designware-platdrv.c +2 -46
83 lines not on this page · raw message
Signature · 1 line
2.43.0.rc1.1.gbec44491f096
Andy Shevchenko
reviewerPATCH v3 16/25 i2c: designware: Unify the firmware type checks
In reply to Andy ShevchenkoInstead of asymmetrical checks for the firmware type use the is_*_node() calls.
--- drivers/i2c/busses/i2c-designware-common.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)
drivers/i2c/busses/i2c-designware-common.c +4 -2
@@ -22,6 +22,7 @@#include <linux/module.h> #include <linux/of.h> #include <linux/pm_runtime.h> +#include <linux/property.h> #include <linux/regmap.h> #include <linux/swab.h> #include <linux/types.h>
@@ -372,14 +373,15 @@ int i2c_dw_fw_parse_and_configure(struct dw_i2c_dev *dev) {struct i2c_timings *t = &dev->timings;struct device *device = dev->dev; +struct fwnode_handle *fwnode =dev_fwnode (device);i2c_parse_fw_timings (device, t, false);i2c_dw_adjust_bus_speed (dev); -if (device->of_node) +if (is_of_node (fwnode))i2c_dw_of_configure (device); -if (has_acpi_companion (device)) +else if (is_acpi_node (fwnode))i2c_dw_acpi_configure (device);return i2c_dw_validate_speed (dev);
Signature · 1 line
2.43.0.rc1.1.gbec44491f096
Andy Shevchenko
reviewerPATCH v3 17/25 i2c: designware: Move exports to I2C_DW namespaces
In reply to Andy ShevchenkoReduce scope of the I²C DesignWare driver exports to I2C_DW namespaces. This will prevent abuse of the symbols and clean up global namespace.
--- drivers/i2c/busses/i2c-designware-common.c | 2 ++ drivers/i2c/busses/i2c-designware-master.c | 3 +++ drivers/i2c/busses/i2c-designware-pcidrv.c | 2 ++ drivers/i2c/busses/i2c-designware-platdrv.c | 2 ++ drivers/i2c/busses/i2c-designware-slave.c | 3 +++ 5 files changed, 12 insertions(+)
drivers/i2c/busses/i2c-designware-common.c +2 -0
@@ -28,6 +28,8 @@#include <linux/types.h> #include <linux/units.h> +#define DEFAULT_SYMBOL_NAMESPACE I2C_DW_COMMON +#include "i2c-designware-core.h" static char *abort_sources[] = {
drivers/i2c/busses/i2c-designware-master.c +3 -0
@@ -22,6 +22,8 @@#include <linux/regmap.h> #include <linux/reset.h> +#define DEFAULT_SYMBOL_NAMESPACE I2C_DW +#include "i2c-designware-core.h" #define AMD_TIMEOUT_MIN_US 25
@@ -1079,3 +1081,4 @@ EXPORT_SYMBOL_GPL(i2c_dw_probe_master);MODULE_DESCRIPTION ("Synopsys DesignWare I2C bus master adapter" );MODULE_LICENSE ("GPL" ); +MODULE_IMPORT_NS (I2C_DW_COMMON );
drivers/i2c/busses/i2c-designware-pcidrv.c +2 -0
@@ -411,3 +411,5 @@ module_pci_driver(dw_i2c_driver);MODULE_AUTHOR ("Baruch Siach <[email protected]>" );MODULE_DESCRIPTION ("Synopsys DesignWare PCI I2C bus adapter" );MODULE_LICENSE ("GPL" ); +MODULE_IMPORT_NS (I2C_DW ); +MODULE_IMPORT_NS (I2C_DW_COMMON );
drivers/i2c/busses/i2c-designware-platdrv.c +2 -0
@@ -471,3 +471,5 @@ module_exit(dw_i2c_exit_driver);MODULE_AUTHOR ("Baruch Siach <[email protected]>" );MODULE_DESCRIPTION ("Synopsys DesignWare I2C bus adapter" );MODULE_LICENSE ("GPL" ); +MODULE_IMPORT_NS (I2C_DW ); +MODULE_IMPORT_NS (I2C_DW_COMMON );
drivers/i2c/busses/i2c-designware-slave.c +3 -0
@@ -16,6 +16,8 @@#include <linux/pm_runtime.h> #include <linux/regmap.h> +#define DEFAULT_SYMBOL_NAMESPACE I2C_DW +#include "i2c-designware-core.h" static void i2c_dw_configure_fifo_slave (struct dw_i2c_dev *dev)
@@ -279,3 +281,4 @@ EXPORT_SYMBOL_GPL(i2c_dw_probe_slave);MODULE_AUTHOR ("Luis Oliveira <[email protected]>" );MODULE_DESCRIPTION ("Synopsys DesignWare I2C bus slave adapter" );MODULE_LICENSE ("GPL v2" ); +MODULE_IMPORT_NS (I2C_DW_COMMON );
Signature · 1 line
2.43.0.rc1.1.gbec44491f096
Andy Shevchenko
reviewerPATCH v3 18/25 i2c: designware: Remove ->disable() callback
In reply to Andy ShevchenkoCommit 90312351fd1e ("i2c: designware: MASTER mode as separated driver") introduced ->disable() callback but there is no real use for it. Both i2c-designware-master.c and i2c-designware-slave.c set it to the same i2c_dw_disable() and scope is inside the same kernel module.
That said, replace the callback by explicitly calling the i2c_dw_disable().
--- drivers/i2c/busses/i2c-designware-core.h | 2 -- drivers/i2c/busses/i2c-designware-master.c | 1 - drivers/i2c/busses/i2c-designware-pcidrv.c | 4 ++-- drivers/i2c/busses/i2c-designware-platdrv.c | 4 ++-- drivers/i2c/busses/i2c-designware-slave.c | 3 +-- 5 files changed, 5 insertions(+), 9 deletions(-)
drivers/i2c/busses/i2c-designware-core.h +0 -2
@@ -238,7 +238,6 @@ struct i2c_dw_semaphore_callbacks;* @semaphore_idx: Index of table with semaphore type attached to the bus. It's * -1 if there is no semaphore. * @shared_with_punit: true if this bus is shared with the SoCs PUNIT -* @disable: function to disable the controller * @init: function to initialize the I2C hardware * @set_sda_hold_time: callback to retrieve IP specific SDA hold timing * @mode: operation mode - DW_IC_MASTER or DW_IC_SLAVE
@@ -295,7 +294,6 @@ struct dw_i2c_dev {void (*release_lock)(void );const struct i2c_dw_semaphore_callbacks *semaphore_cb;bool shared_with_punit; -void (*disable)(struct dw_i2c_dev *dev);int (*init)(struct dw_i2c_dev *dev);int (*set_sda_hold_time)(struct dw_i2c_dev *dev);int mode;
drivers/i2c/busses/i2c-designware-master.c +0 -1
@@ -990,7 +990,6 @@ int i2c_dw_probe_master(struct dw_i2c_dev *dev)init_completion (&dev->cmd_complete); dev->init = i2c_dw_init_master; - dev->disable = i2c_dw_disable; ret =i2c_dw_init_regmap (dev);if (ret)
drivers/i2c/busses/i2c-designware-pcidrv.c +2 -2
@@ -198,7 +198,7 @@ static int __maybe_unused i2c_dw_pci_runtime_suspend(struct device *dev) {struct dw_i2c_dev *i_dev =dev_get_drvdata (dev); - i_dev->disable (i_dev); +i2c_dw_disable (i_dev);return 0 ; }
@@ -341,7 +341,7 @@ static void i2c_dw_pci_remove(struct pci_dev *pdev)i2c_del_adapter (&dev->adapter); - dev->disable (dev); +i2c_dw_disable (dev);pm_runtime_forbid (&pdev->dev);pm_runtime_get_noresume (&pdev->dev);
drivers/i2c/busses/i2c-designware-platdrv.c +2 -2
@@ -343,7 +343,7 @@ static void dw_i2c_plat_remove(struct platform_device *pdev)i2c_del_adapter (&dev->adapter); - dev->disable (dev); +i2c_dw_disable (dev);pm_runtime_dont_use_autosuspend (&pdev->dev);pm_runtime_put_sync (&pdev->dev);
@@ -367,7 +367,7 @@ static int dw_i2c_plat_runtime_suspend(struct device *dev)if (i_dev->shared_with_punit)return 0 ; - i_dev->disable (i_dev); +i2c_dw_disable (i_dev);i2c_dw_prepare_clk (i_dev, false);return 0 ;
drivers/i2c/busses/i2c-designware-slave.c +1 -2
@@ -90,7 +90,7 @@ static int i2c_dw_unreg_slave(struct i2c_client *slave)struct dw_i2c_dev *dev =i2c_get_adapdata (slave->adapter);regmap_write (dev->map,DW_IC_INTR_MASK ,0 ); - dev->disable (dev); +i2c_dw_disable (dev);synchronize_irq (dev->irq); dev->slave =NULL ;pm_runtime_put (dev->dev);
@@ -237,7 +237,6 @@ int i2c_dw_probe_slave(struct dw_i2c_dev *dev)int ret; dev->init = i2c_dw_init_slave; - dev->disable = i2c_dw_disable; ret =i2c_dw_init_regmap (dev);if (ret)
Signature · 1 line
2.43.0.rc1.1.gbec44491f096
Re: [PATCH v3 18/25] i2c: designware: Remove ->disable() callback
Quoted 7 lines · Andy Shevchenko
Commit
90312351fd1e("i2c: designware: MASTER mode as separated driver") introduced ->disable() callback but there is no real use for it. Bothi2c-designware-master.candi2c-designware-slave.cset it to the samei2c_dw_disable()and scope is inside the same kernel module.That said, replace the callback by explicitly calling the
i2c_dw_disable().
Quoted 9 lines
Signed-off-by Andy Shevchenko <[email protected]>--- drivers/i2c/busses/i2c-designware-core.h | 2 -- drivers/i2c/busses/i2c-designware-master.c | 1 - drivers/i2c/busses/i2c-designware-pcidrv.c | 4 ++-- drivers/i2c/busses/i2c-designware-platdrv.c | 4 ++-- drivers/i2c/busses/i2c-designware-slave.c | 3 +-- 5 files changed, 5 insertions(+), 9 deletions(-)
Hmm... no report from kernel test robot but I'm getting build error below after this patch when driver (and I2C core) is built as module.
CONFIG_I2C_DESIGNWARE_CORE=mCONFIG_I2C_DESIGNWARE_SLAVE=yCONFIG_I2C_DESIGNWARE_PLATFORM=mCONFIG_I2C_DESIGNWARE_BAYTRAIL=yCONFIG_I2C_DESIGNWARE_PCI=mCONFIG_SPI_DESIGNWARE=m
CC [M] drivers/i2c/busses/i2c-designware-common.o CC [M] drivers/i2c/busses/i2c-designware-master.o CC [M] drivers/i2c/busses/i2c-designware-slave.o CC [M] drivers/i2c/busses/i2c-designware-platdrv.o CC [M] drivers/i2c/busses/i2c-designware-baytrail.o CC [M] drivers/i2c/busses/i2c-designware-pcidrv.o LD [M] drivers/i2c/busses/i2c-designware-platform.o LD [M] drivers/i2c/busses/i2c-designware-pci.o LD [M] drivers/i2c/busses/i2c-designware-core.o
MODPOST Module.symvers
ERROR: modpost: "i2c_dw_disable" [drivers/i2c/busses/i2c-designware-platform.ko] undefined!
ERROR: modpost: "i2c_dw_disable" [drivers/i2c/busses/i2c-designware-pci.ko] undefined! make[2]: *** [scripts/Makefile.modpost:145: Module.symvers] Error 1
make[1]: *** [/workdisk/linux/linux/Makefile:1863: modpost] Error 2
make: *** [Makefile:234: __sub-make] Error 2
Andy Shevchenko
reviewerPATCH v3 19/25 i2c: designware: Consolidate PM ops
In reply to Andy ShevchenkoWe have the same (*) PM ops in the PCI and plaform drivers. Instead, consolidate that PM ops under exported variable and deduplicate them.
*)
With the subtle ACPI and P-Unit behaviour differences in PCI case. But this is not a problem as for ACPI we need to take care of the P-Unit semaphore anyway and calling PM ops for ACPI makes sense as it might provide specific operation regions in (however there are no known devices on market that are using it with PCI enabled I2C). Note, the clocks are not in use in the PCI case.
--- drivers/i2c/busses/i2c-designware-common.c | 62 ++++++++++++++++++++ drivers/i2c/busses/i2c-designware-core.h | 5 +- drivers/i2c/busses/i2c-designware-pcidrv.c | 44 +------------- drivers/i2c/busses/i2c-designware-platdrv.c | 64 +-------------------- 4 files changed, 69 insertions(+), 106 deletions(-)
drivers/i2c/busses/i2c-designware-common.c +62 -0
@@ -21,6 +21,7 @@#include <linux/kernel.h> #include <linux/module.h> #include <linux/of.h> +#include <linux/pm.h> #include <linux/pm_runtime.h> #include <linux/property.h> #include <linux/regmap.h>
@@ -712,5 +713,66 @@ void i2c_dw_disable(struct dw_i2c_dev *dev)i2c_dw_release_lock (dev); } +static int i2c_dw_prepare (struct device *device) +{ +/* +* If the ACPI companion device object is present for this device, +* it may be accessed during suspend and resume of other devices via +* I2C operation regions, so tell the PM core and middle layers to +* avoid skipping system suspend/resume callbacks for it in that case. +*/ +return !has_acpi_companion (device); +} + +static int i2c_dw_runtime_suspend (struct device *device) +{ +struct dw_i2c_dev *dev =dev_get_drvdata (device); + +if (dev->shared_with_punit) +return 0 ; + +i2c_dw_disable (dev); +i2c_dw_prepare_clk (dev, false); + +return 0 ; +} + +static int i2c_dw_suspend (struct device *device) +{ +struct dw_i2c_dev *dev =dev_get_drvdata (device); + +i2c_mark_adapter_suspended (&dev->adapter); + +return i2c_dw_runtime_suspend (device); +} + +static int i2c_dw_runtime_resume (struct device *device) +{ +struct dw_i2c_dev *dev =dev_get_drvdata (device); + +if (!dev->shared_with_punit) +i2c_dw_prepare_clk (dev, true); + + dev->init (dev); + +return 0 ; +} + +static int i2c_dw_resume (struct device *device) +{ +struct dw_i2c_dev *dev =dev_get_drvdata (device); + +i2c_dw_runtime_resume (device); +i2c_mark_adapter_resumed (&dev->adapter); + +return 0 ; +} + +EXPORT_GPL_DEV_PM_OPS (i2c_dw_dev_pm_ops) = { + .prepare =pm_sleep_ptr (i2c_dw_prepare), + LATE_SYSTEM_SLEEP_PM_OPS(i2c_dw_suspend, i2c_dw_resume) +RUNTIME_PM_OPS (i2c_dw_runtime_suspend, i2c_dw_runtime_resume,NULL ) +}; +MODULE_DESCRIPTION ("Synopsys DesignWare I2C bus adapter core" );MODULE_LICENSE ("GPL" );
drivers/i2c/busses/i2c-designware-core.h +4 -1
@@ -15,6 +15,7 @@#include <linux/dev_printk.h> #include <linux/errno.h> #include <linux/i2c.h> +#include <linux/pm.h> #include <linux/regmap.h> #include <linux/types.h>
@@ -337,7 +338,8 @@ int i2c_dw_wait_bus_not_busy(struct dw_i2c_dev *dev);int i2c_dw_handle_tx_abort (struct dw_i2c_dev *dev);int i2c_dw_set_fifo_size (struct dw_i2c_dev *dev);u32 i2c_dw_func (struct i2c_adapter *adap); -void i2c_dw_disable (struct dw_i2c_dev *dev); + +extern const struct dev_pm_ops i2c_dw_dev_pm_ops;static inline void __i2c_dw_enable (struct dw_i2c_dev *dev) {
@@ -352,6 +354,7 @@ static inline void __i2c_dw_disable_nowait(struct dw_i2c_dev *dev) }void __i2c_dw_disable (struct dw_i2c_dev *dev); +void i2c_dw_disable (struct dw_i2c_dev *dev);extern void i2c_dw_configure_master (struct dw_i2c_dev *dev);extern int i2c_dw_probe_master (struct dw_i2c_dev *dev);
drivers/i2c/busses/i2c-designware-pcidrv.c +2 -42
62 lines not on this page · raw message
drivers/i2c/busses/i2c-designware-platdrv.c +1 -63
82 lines not on this page · raw message
Signature · 1 line
2.43.0.rc1.1.gbec44491f096
Andy Shevchenko
reviewerPATCH v3 20/25 i2c: designware: Uninline i2c_dw_probe()
In reply to Andy ShevchenkoSince i2c_dw_probe() is going to be extended, uninline it to reduce the noise in the common header.
--- drivers/i2c/busses/i2c-designware-common.c | 14 ++++++++++++++ drivers/i2c/busses/i2c-designware-core.h | 17 ++--------------- 2 files changed, 16 insertions(+), 15 deletions(-)
drivers/i2c/busses/i2c-designware-common.c +14 -0
@@ -713,6 +713,20 @@ void i2c_dw_disable(struct dw_i2c_dev *dev)i2c_dw_release_lock (dev); } +int i2c_dw_probe (struct dw_i2c_dev *dev) +{ +switch (dev->mode) { +case DW_IC_SLAVE : +return i2c_dw_probe_slave (dev); +case DW_IC_MASTER : +return i2c_dw_probe_master (dev); +default : +dev_err (dev->dev,"Wrong operation mode: %d\n" , dev->mode); +return -EINVAL ; + } +} +EXPORT_SYMBOL_GPL (i2c_dw_probe); +static int i2c_dw_prepare (struct device *device) {/*
drivers/i2c/busses/i2c-designware-core.h +2 -15
@@ -10,9 +10,7 @@*/ #include <linux/bits.h> -#include <linux/compiler_types.h> #include <linux/completion.h> -#include <linux/dev_printk.h> #include <linux/errno.h> #include <linux/i2c.h> #include <linux/pm.h>
@@ -367,19 +365,6 @@ static inline void i2c_dw_configure_slave(struct dw_i2c_dev *dev) { }static inline int i2c_dw_probe_slave (struct dw_i2c_dev *dev) {return -EINVAL ; }#endif -static inline int i2c_dw_probe (struct dw_i2c_dev *dev) -{ -switch (dev->mode) { -case DW_IC_SLAVE : -return i2c_dw_probe_slave (dev); -case DW_IC_MASTER : -return i2c_dw_probe_master (dev); -default : -dev_err (dev->dev,"Wrong operation mode: %d\n" , dev->mode); -return -EINVAL ; - } -} -static inline void i2c_dw_configure (struct dw_i2c_dev *dev) {if (i2c_detect_slave_mode (dev->dev))
@@ -388,6 +373,8 @@ static inline void i2c_dw_configure(struct dw_i2c_dev *dev)i2c_dw_configure_master (dev); } +int i2c_dw_probe (struct dw_i2c_dev *dev); +#if IS_ENABLED (CONFIG_I2C_DESIGNWARE_BAYTRAIL )int i2c_dw_baytrail_probe_lock_support (struct dw_i2c_dev *dev);#endif
Signature · 1 line
2.43.0.rc1.1.gbec44491f096
Andy Shevchenko
reviewerPATCH v3 21/25 i2c: designware: Propagate firmware node
In reply to Andy ShevchenkoPropagate firmware node by using a specific API call, i.e. device_set_node().
--- drivers/i2c/busses/i2c-designware-common.c | 2 ++ drivers/i2c/busses/i2c-designware-pcidrv.c | 2 -- drivers/i2c/busses/i2c-designware-platdrv.c | 3 --- 3 files changed, 2 insertions(+), 5 deletions(-)
drivers/i2c/busses/i2c-designware-common.c +2 -0
@@ -715,6 +715,8 @@ void i2c_dw_disable(struct dw_i2c_dev *dev)int i2c_dw_probe (struct dw_i2c_dev *dev) { +device_set_node (&dev->adapter.dev,dev_fwnode (dev->dev)); +switch (dev->mode) {case DW_IC_SLAVE :return i2c_dw_probe_slave (dev);
drivers/i2c/busses/i2c-designware-pcidrv.c +0 -2
@@ -9,7 +9,6 @@* Copyright (C) 2009 Provigent Ltd. * Copyright (C) 2011, 2015, 2016 Intel Corporation. */ -#include <linux/acpi.h> #include <linux/delay.h> #include <linux/err.h> #include <linux/errno.h>
@@ -273,7 +272,6 @@ static int i2c_dw_pci_probe(struct pci_dev *pdev, adap = &dev->adapter; adap->owner =THIS_MODULE ; adap->class =0 ; -ACPI_COMPANION_SET (&adap->dev,ACPI_COMPANION (&pdev->dev)); adap->nr = controller->bus_num; r =i2c_dw_probe (dev);
drivers/i2c/busses/i2c-designware-platdrv.c +0 -3
@@ -8,7 +8,6 @@* Copyright (C) 2007 MontaVista Software Inc. * Copyright (C) 2009 Provigent Ltd. */ -#include <linux/acpi.h> #include <linux/clk-provider.h> #include <linux/clk.h> #include <linux/delay.h>
@@ -305,8 +304,6 @@ static int dw_i2c_plat_probe(struct platform_device *pdev) adap->owner =THIS_MODULE ; adap->class =dmi_check_system (dw_i2c_hwmon_class_dmi) ?I2C_CLASS_HWMON :I2C_CLASS_DEPRECATED ; -ACPI_COMPANION_SET (&adap->dev,ACPI_COMPANION (&pdev->dev)); - adap->dev.of_node = pdev->dev.of_node; adap->nr =-1 ;if (dev->flags &ACCESS_NO_IRQ_SUSPEND ) {
Signature · 1 line
2.43.0.rc1.1.gbec44491f096
Andy Shevchenko
reviewerPATCH v3 22/25 i2c: designware: Use pci_get_drvdata()
In reply to Andy ShevchenkoUse the wrapper function for getting the driver data using pci_dev instead of using dev_get_drvdata() with &pdev->dev, so we can directly pass a struct pci_dev. This is a purely cosmetic change.
--- drivers/i2c/busses/i2c-designware-pcidrv.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/i2c/busses/i2c-designware-pcidrv.c +2 -2
@@ -102,7 +102,7 @@ static u32 mfld_get_clk_rate_khz(struct dw_i2c_dev *dev)static int mfld_setup (struct pci_dev *pdev,struct dw_pci_controller *c) { -struct dw_i2c_dev *dev =dev_get_drvdata (&pdev->dev); +struct dw_i2c_dev *dev =pci_get_drvdata (pdev);switch (pdev->device) {case 0x0817 :
@@ -152,7 +152,7 @@ static u32 navi_amd_get_clk_rate_khz(struct dw_i2c_dev *dev)static int navi_amd_setup (struct pci_dev *pdev,struct dw_pci_controller *c) { -struct dw_i2c_dev *dev =dev_get_drvdata (&pdev->dev); +struct dw_i2c_dev *dev =pci_get_drvdata (pdev); dev->flags |=MODEL_AMD_NAVI_GPU ; dev->timings.bus_freq_hz =I2C_MAX_STANDARD_MODE_FREQ ;
Signature · 1 line
2.43.0.rc1.1.gbec44491f096
Andy Shevchenko
reviewerPATCH v3 23/25 i2c: designware: Use temporary variable for struct device
In reply to Andy ShevchenkoUse temporary variable for struct device to make code neater.
--- drivers/i2c/busses/i2c-designware-pcidrv.c | 24 +++++++------- drivers/i2c/busses/i2c-designware-platdrv.c | 35 ++++++++++----------- 2 files changed, 27 insertions(+), 32 deletions(-)
drivers/i2c/busses/i2c-designware-pcidrv.c +11 -13
@@ -207,6 +207,7 @@ static const struct software_node dgpu_node = {static int i2c_dw_pci_probe (struct pci_dev *pdev,const struct pci_device_id *id) { +struct device *device = &pdev->dev;struct dw_i2c_dev *dev;struct i2c_adapter *adap;int r;
@@ -214,25 +215,22 @@ static int i2c_dw_pci_probe(struct pci_dev *pdev,struct dw_scl_sda_cfg *cfg;if (id->driver_data >=ARRAY_SIZE (dw_pci_controllers)) -return dev_err_probe (&pdev->dev, -EINVAL , -"Invalid driver data %ld\n" , +return dev_err_probe (device, -EINVAL ,"Invalid driver data %ld\n" , id->driver_data); controller = &dw_pci_controllers[id->driver_data]; r =pcim_enable_device (pdev);if (r) -return dev_err_probe (&pdev->dev, r, -"Failed to enable I2C PCI device\n" ); +return dev_err_probe (device, r,"Failed to enable I2C PCI device\n" );pci_set_master (pdev); r =pcim_iomap_regions (pdev,1 <<0 ,pci_name (pdev));if (r) -return dev_err_probe (&pdev->dev, r, -"I/O memory remapping failed\n" ); +return dev_err_probe (device, r,"I/O memory remapping failed\n" ); - dev =devm_kzalloc (&pdev->dev,sizeof (*dev),GFP_KERNEL ); + dev =devm_kzalloc (device,sizeof (*dev),GFP_KERNEL );if (!dev)return -ENOMEM ;
@@ -242,7 +240,7 @@ static int i2c_dw_pci_probe(struct pci_dev *pdev, dev->get_clk_rate_khz = controller->get_clk_rate_khz; dev->base =pcim_iomap_table (pdev)[0 ]; - dev->dev = &pdev->dev; + dev->dev = device; dev->irq =pci_irq_vector (pdev,0 ); dev->flags |= controller->flags;
@@ -281,14 +279,14 @@ static int i2c_dw_pci_probe(struct pci_dev *pdev,if ((dev->flags &MODEL_MASK ) ==MODEL_AMD_NAVI_GPU ) { dev->slave =i2c_new_ccgx_ucsi (&dev->adapter, dev->irq, &dgpu_node);if (IS_ERR (dev->slave)) -return dev_err_probe (dev->dev,PTR_ERR (dev->slave), +return dev_err_probe (device,PTR_ERR (dev->slave),"register UCSI failed\n" ); } -pm_runtime_set_autosuspend_delay (&pdev->dev,1000 ); -pm_runtime_use_autosuspend (&pdev->dev); -pm_runtime_put_autosuspend (&pdev->dev); -pm_runtime_allow (&pdev->dev); +pm_runtime_set_autosuspend_delay (device,1000 ); +pm_runtime_use_autosuspend (device); +pm_runtime_put_autosuspend (device); +pm_runtime_allow (device);return 0 ; }
drivers/i2c/busses/i2c-designware-platdrv.c +16 -19
@@ -237,6 +237,7 @@ static int dw_i2c_plat_get_reset(struct dw_i2c_dev *dev)static int dw_i2c_plat_probe (struct platform_device *pdev) { +struct device *device = &pdev->dev;struct i2c_adapter *adap;struct dw_i2c_dev *dev;int irq, ret;
@@ -245,15 +246,15 @@ static int dw_i2c_plat_probe(struct platform_device *pdev)if (irq <0 )return irq; - dev =devm_kzalloc (&pdev->dev,sizeof (struct dw_i2c_dev ),GFP_KERNEL ); + dev =devm_kzalloc (device,sizeof (*dev),GFP_KERNEL );if (!dev)return -ENOMEM ; - dev->flags = (uintptr_t )device_get_match_data (&pdev->dev); -if (device_property_present (&pdev->dev,"wx,i2c-snps-model" )) + dev->flags = (uintptr_t )device_get_match_data (device); +if (device_property_present (device,"wx,i2c-snps-model" )) dev->flags =MODEL_WANGXUN_SP ; - dev->dev = &pdev->dev; + dev->dev = device; dev->irq = irq;platform_set_drvdata (pdev, dev);
@@ -276,11 +277,11 @@ static int dw_i2c_plat_probe(struct platform_device *pdev)i2c_dw_configure (dev);/* Optional interface clock */ - dev->pclk =devm_clk_get_optional (&pdev->dev,"pclk" ); + dev->pclk =devm_clk_get_optional (device,"pclk" );if (IS_ERR (dev->pclk))return PTR_ERR (dev->pclk); - dev->clk =devm_clk_get_optional (&pdev->dev,NULL ); + dev->clk =devm_clk_get_optional (device,NULL );if (IS_ERR (dev->clk))return PTR_ERR (dev->clk);
@@ -306,23 +307,19 @@ static int dw_i2c_plat_probe(struct platform_device *pdev) I2C_CLASS_HWMON :I2C_CLASS_DEPRECATED ; adap->nr =-1 ; -if (dev->flags &ACCESS_NO_IRQ_SUSPEND ) { -dev_pm_set_driver_flags (&pdev->dev, -DPM_FLAG_SMART_PREPARE ); - }else { -dev_pm_set_driver_flags (&pdev->dev, -DPM_FLAG_SMART_PREPARE | -DPM_FLAG_SMART_SUSPEND ); - } +if (dev->flags &ACCESS_NO_IRQ_SUSPEND ) +dev_pm_set_driver_flags (device,DPM_FLAG_SMART_PREPARE ); +else +dev_pm_set_driver_flags (device,DPM_FLAG_SMART_PREPARE |DPM_FLAG_SMART_SUSPEND ); -device_enable_async_suspend (&pdev->dev); +device_enable_async_suspend (device);/* The code below assumes runtime PM to be disabled. */ -WARN_ON (pm_runtime_enabled (&pdev->dev)); +WARN_ON (pm_runtime_enabled (device)); -pm_runtime_set_autosuspend_delay (&pdev->dev,1000 ); -pm_runtime_use_autosuspend (&pdev->dev); -pm_runtime_set_active (&pdev->dev); +pm_runtime_set_autosuspend_delay (device,1000 ); +pm_runtime_use_autosuspend (device); +pm_runtime_set_active (device); ret =dw_i2c_plat_pm_setup (dev);if (ret)
Signature · 1 line
2.43.0.rc1.1.gbec44491f096
Re: [PATCH v3 23/25] i2c: designware: Use temporary variable for struct device
Quoted 3 lines · Andy Shevchenko
Use temporary variable for struct device to make code neater.
Signed-off-by Andy Shevchenko <[email protected]>
Quoted 155 lines
--- drivers/i2c/busses/i2c-designware-pcidrv.c | 24 +++++++------- drivers/i2c/busses/i2c-designware-platdrv.c | 35 ++++++++++----------- 2 files changed, 27 insertions(+), 32 deletions(-)drivers/i2c/busses/i2c-designware-pcidrv.c +11
-13@@ -207,6 +207,7 @@ static const struct software_node dgpu_node = {static int i2c_dw_pci_probe (struct pci_dev *pdev,const struct pci_device_id *id) { +struct device *device = &pdev->dev;struct dw_i2c_dev *dev;struct i2c_adapter *adap;int r;@@ -214,25 +215,22 @@ static int i2c_dw_pci_probe(struct pci_dev *pdev,struct dw_scl_sda_cfg *cfg;if (id->driver_data >=ARRAY_SIZE (dw_pci_controllers)) -return dev_err_probe (&pdev->dev, -EINVAL , -"Invalid driver data %ld\n" , +return dev_err_probe (device, -EINVAL ,"Invalid driver data %ld\n" , id->driver_data); controller = &dw_pci_controllers[id->driver_data]; r =pcim_enable_device (pdev);if (r) -return dev_err_probe (&pdev->dev, r, -"Failed to enable I2C PCI device\n" ); +return dev_err_probe (device, r,"Failed to enable I2C PCI device\n" );pci_set_master (pdev); r =pcim_iomap_regions (pdev,1 <<0 ,pci_name (pdev));if (r) -return dev_err_probe (&pdev->dev, r, -"I/O memory remapping failed\n" ); +return dev_err_probe (device, r,"I/O memory remapping failed\n" ); - dev =devm_kzalloc (&pdev->dev,sizeof (*dev),GFP_KERNEL ); + dev =devm_kzalloc (device,sizeof (*dev),GFP_KERNEL );if (!dev)return -ENOMEM ;@@ -242,7 +240,7 @@ static int i2c_dw_pci_probe(struct pci_dev *pdev, dev->get_clk_rate_khz = controller->get_clk_rate_khz; dev->base =pcim_iomap_table (pdev)[0 ]; - dev->dev = &pdev->dev; + dev->dev = device; dev->irq =pci_irq_vector (pdev,0 ); dev->flags |= controller->flags;@@ -281,14 +279,14 @@ static int i2c_dw_pci_probe(struct pci_dev *pdev,if ((dev->flags &MODEL_MASK ) ==MODEL_AMD_NAVI_GPU ) { dev->slave =i2c_new_ccgx_ucsi (&dev->adapter, dev->irq, &dgpu_node);if (IS_ERR (dev->slave)) -return dev_err_probe (dev->dev,PTR_ERR (dev->slave), +return dev_err_probe (device,PTR_ERR (dev->slave),"register UCSI failed\n" ); } -pm_runtime_set_autosuspend_delay (&pdev->dev,1000 ); -pm_runtime_use_autosuspend (&pdev->dev); -pm_runtime_put_autosuspend (&pdev->dev); -pm_runtime_allow (&pdev->dev); +pm_runtime_set_autosuspend_delay (device,1000 ); +pm_runtime_use_autosuspend (device); +pm_runtime_put_autosuspend (device); +pm_runtime_allow (device);return 0 ; }drivers/i2c/busses/i2c-designware-platdrv.c +16
-19@@ -237,6 +237,7 @@ static int dw_i2c_plat_get_reset(struct dw_i2c_dev *dev)static int dw_i2c_plat_probe (struct platform_device *pdev) { +struct device *device = &pdev->dev;struct i2c_adapter *adap;struct dw_i2c_dev *dev;int irq, ret;@@ -245,15 +246,15 @@ static int dw_i2c_plat_probe(struct platform_device *pdev)if (irq <0 )return irq; - dev =devm_kzalloc (&pdev->dev,sizeof (struct dw_i2c_dev ),GFP_KERNEL ); + dev =devm_kzalloc (device,sizeof (*dev),GFP_KERNEL );if (!dev)return -ENOMEM ; - dev->flags = (uintptr_t )device_get_match_data (&pdev->dev); -if (device_property_present (&pdev->dev,"wx,i2c-snps-model" )) + dev->flags = (uintptr_t )device_get_match_data (device); +if (device_property_present (device,"wx,i2c-snps-model" )) dev->flags =MODEL_WANGXUN_SP ; - dev->dev = &pdev->dev; + dev->dev = device; dev->irq = irq;platform_set_drvdata (pdev, dev);@@ -276,11 +277,11 @@ static int dw_i2c_plat_probe(struct platform_device *pdev)i2c_dw_configure (dev);/* Optional interface clock */ - dev->pclk =devm_clk_get_optional (&pdev->dev,"pclk" ); + dev->pclk =devm_clk_get_optional (device,"pclk" );if (IS_ERR (dev->pclk))return PTR_ERR (dev->pclk); - dev->clk =devm_clk_get_optional (&pdev->dev,NULL ); + dev->clk =devm_clk_get_optional (device,NULL );if (IS_ERR (dev->clk))return PTR_ERR (dev->clk);@@ -306,23 +307,19 @@ static int dw_i2c_plat_probe(struct platform_device *pdev) I2C_CLASS_HWMON :I2C_CLASS_DEPRECATED ; adap->nr =-1 ; -if (dev->flags &ACCESS_NO_IRQ_SUSPEND ) { -dev_pm_set_driver_flags (&pdev->dev, -DPM_FLAG_SMART_PREPARE ); - }else { -dev_pm_set_driver_flags (&pdev->dev, -DPM_FLAG_SMART_PREPARE | -DPM_FLAG_SMART_SUSPEND ); - } +if (dev->flags &ACCESS_NO_IRQ_SUSPEND ) +dev_pm_set_driver_flags (device,DPM_FLAG_SMART_PREPARE ); +else +dev_pm_set_driver_flags (device,DPM_FLAG_SMART_PREPARE |DPM_FLAG_SMART_SUSPEND ); -device_enable_async_suspend (&pdev->dev); +device_enable_async_suspend (device);/* The code below assumes runtime PM to be disabled. */ -WARN_ON (pm_runtime_enabled (&pdev->dev)); +WARN_ON (pm_runtime_enabled (device)); -pm_runtime_set_autosuspend_delay (&pdev->dev,1000 ); -pm_runtime_use_autosuspend (&pdev->dev); -pm_runtime_set_active (&pdev->dev); +pm_runtime_set_autosuspend_delay (device,1000 ); +pm_runtime_use_autosuspend (device); +pm_runtime_set_active (device); ret =dw_i2c_plat_pm_setup (dev);if (ret)
Andy Shevchenko
reviewerPATCH v3 24/25 i2c: designware: Get rid of redundant 'else'
In reply to Andy ShevchenkoIn the snippets like the following
if (...) return / goto / break / continue ...; else ...
the 'else' is redundant. Get rid of it.
--- drivers/i2c/busses/i2c-designware-common.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
drivers/i2c/busses/i2c-designware-common.c +3 -3
@@ -639,10 +639,10 @@ int i2c_dw_handle_tx_abort(struct dw_i2c_dev *dev)if (abort_source &DW_IC_TX_ARB_LOST )return -EAGAIN ; -else if (abort_source &DW_IC_TX_ABRT_GCALL_READ ) +if (abort_source &DW_IC_TX_ABRT_GCALL_READ )return -EINVAL ;/* wrong msgs[] data */ -else -return -EIO ; + +return -EIO ; }int i2c_dw_set_fifo_size (struct dw_i2c_dev *dev)
Signature · 1 line
2.43.0.rc1.1.gbec44491f096
Andy Shevchenko
reviewerPATCH v3 25/25 i2c: designware: Fix spelling and other issues in the comments
In reply to Andy ShevchenkoFix spelling and other issues, such as kernel-doc reported about, in the comments. While at it, fix some indentation issues as well.
--- drivers/i2c/busses/i2c-designware-amdpsp.c | 10 +++++----- drivers/i2c/busses/i2c-designware-common.c | 8 +++++--- drivers/i2c/busses/i2c-designware-core.h | 10 +++++----- drivers/i2c/busses/i2c-designware-master.c | 15 +++++++++------ drivers/i2c/busses/i2c-designware-platdrv.c | 4 ++-- drivers/i2c/busses/i2c-designware-slave.c | 6 ++++-- 6 files changed, 30 insertions(+), 23 deletions(-)
drivers/i2c/busses/i2c-designware-amdpsp.c +5 -5
@@ -155,7 +155,7 @@ static void psp_release_i2c_bus_deferred(struct work_struct *work)/* * If there is any pending transaction, cannot release the bus here. -* psp_release_i2c_bus will take care of this later. +* psp_release_i2c_bus() will take care of this later. */ if (psp_i2c_access_count) goto cleanup;
@@ -210,12 +210,12 @@ static void psp_release_i2c_bus(void) {mutex_lock (&psp_i2c_access_mutex); -/* Return early if mailbox was malfunctional */ +/* Return early if mailbox was malfunctioned */ if (psp_i2c_mbox_fail) goto cleanup;/* -* If we are last owner of PSP semaphore, need to release aribtration +* If we are last owner of PSP semaphore, need to release arbitration * via mailbox. */ psp_i2c_access_count--;
@@ -235,9 +235,9 @@ static void psp_release_i2c_bus(void)/* * Locking methods are based on the default implementation from -* drivers/i2c/i2c-core-base.c, but with psp acquire and release operations +* drivers/i2c/i2c-core-base.c, but with PSP acquire and release operations * added. With this in place we can ensure that i2c clients on the bus shared -* with psp are able to lock HW access to the bus for arbitrary number of +* with PSP are able to lock HW access to the bus for arbitrary number of * operations - that is e.g. write-wait-read. */ static void i2c_adapter_dw_psp_lock_bus(struct i2c_adapter *adapter,
drivers/i2c/busses/i2c-designware-common.c +5 -3
@@ -127,6 +127,8 @@ static int dw_reg_write_word(void *context, unsigned int reg, unsigned int val)* Autodetects needed register access mode and creates the regmap with * corresponding read/write callbacks. This must be called before doing any * other register access. +* +* Return: 0 on success, or negative errno otherwise. */ int i2c_dw_init_regmap (struct dw_i2c_dev *dev) {
@@ -174,7 +176,7 @@ int i2c_dw_init_regmap(struct dw_i2c_dev *dev)/* * Note we'll check the return value of the regmap IO accessors only * at the probe stage. The rest of the code won't do this because -* basically we have MMIO-based regmap so non of the read/write methods +* basically we have MMIO-based regmap, so none of the read/write methods * can fail. */ dev->map =devm_regmap_init (dev->dev,NULL , dev, &map_cfg);
@@ -336,7 +338,7 @@ static u32 i2c_dw_acpi_round_bus_speed(struct device *device) acpi_speed =i2c_acpi_find_bus_speed (device);/* -* Some DSTDs use a non standard speed, round down to the lowest +* Some DSDTs use a non standard speed, round down to the lowest * standard speed. */ for (i =0 ; i <ARRAY_SIZE (supported_speeds); i++) {
@@ -532,7 +534,7 @@ void __i2c_dw_disable(struct dw_i2c_dev *dev)/* * Wait 10 times the signaling period of the highest I2C -* transfer supported by the driver (for 400KHz this is +* transfer supported by the driver (for 400kHz this is * 25us) as described in the DesignWare I2C databook. */ usleep_range (25 ,250 );
drivers/i2c/busses/i2c-designware-core.h +5 -5
@@ -141,10 +141,10 @@#define DW_IC_SLAVE 1/* -* Hardware abort codes from the DW_IC_TX_ABRT_SOURCE register +* Hardware abort codes from the DW_IC_TX_ABRT_SOURCE register. * -* Only expected abort codes are listed here -* refer to the datasheet for the full list +* Only expected abort codes are listed here, +* refer to the datasheet for the full list. */ #define ABRT_7B_ADDR_NOACK 0#define ABRT_10ADDR1_NOACK 1
@@ -201,7 +201,7 @@ struct i2c_dw_semaphore_callbacks;* @rst: optional reset for the controller * @slave: represent an I2C slave device * @get_clk_rate_khz: callback to retrieve IP specific bus speed -* @cmd_err: run time hadware error code +* @cmd_err: run time hardware error code * @msgs: points to an array of messages currently being transferred * @msgs_num: the number of elements in msgs * @msg_write_idx: the element index of the current tx message in the msgs array
@@ -236,7 +236,7 @@ struct i2c_dw_semaphore_callbacks;* @release_lock: function to release a hardware lock on the bus * @semaphore_idx: Index of table with semaphore type attached to the bus. It's * -1 if there is no semaphore. -* @shared_with_punit: true if this bus is shared with the SoCs PUNIT +* @shared_with_punit: true if this bus is shared with the SoC's PUNIT * @init: function to initialize the I2C hardware * @set_sda_hold_time: callback to retrieve IP specific SDA hold timing * @mode: operation mode - DW_IC_MASTER or DW_IC_SLAVE
drivers/i2c/busses/i2c-designware-master.c +9 -6
@@ -168,12 +168,14 @@ static int i2c_dw_set_timings_master(struct dw_i2c_dev *dev) }/** -* i2c_dw_init_master() - Initialize the designware I2C master hardware +* i2c_dw_init_master() - Initialize the DesignWare I2C master hardware * @dev: device private data * * This functions configures and enables the I2C master. * This function is called during I2C init function, and in case of timeout at * run time. +* +* Return: 0 on success, or negative errno otherwise. */ static int i2c_dw_init_master (struct dw_i2c_dev *dev) {
@@ -314,7 +316,7 @@ static int amd_i2c_dw_xfer_quirk(struct i2c_adapter *adap, struct i2c_msg *msgs,/* * Initiate the i2c read/write transaction of buffer length, * and poll for bus busy status. For the last message transfer, -* update the command with stopbit enable. +* update the command with stop bit enable. */ for (msg_itr_lmt = buf_len; msg_itr_lmt >0 ; msg_itr_lmt--) {if (msg_wrt_idx == num_msgs -1 && msg_itr_lmt ==1 )
@@ -421,7 +423,7 @@ static int txgbe_i2c_dw_xfer_quirk(struct i2c_adapter *adap, struct i2c_msg *msg/* * Initiate (and continue) low level master read/write transaction. -* This function is only called from i2c_dw_isr, and pumping i2c_msg +* This function is only called from i2c_dw_isr(), and pumping i2c_msg * messages into the tx buffer. Even if the size of i2c_msg data is * longer than the size of the tx buffer, it handles everything. */
@@ -459,7 +461,8 @@ i2c_dw_xfer_msg(struct dw_i2c_dev *dev) buf = msgs[dev->msg_write_idx].buf; buf_len = msgs[dev->msg_write_idx].len; -/* If both IC_EMPTYFIFO_HOLD_MASTER_EN and +/* +* If both IC_EMPTYFIFO_HOLD_MASTER_EN and * IC_RESTART_EN are set, we must manually * set restart bit between messages. */
@@ -949,7 +952,7 @@ static int i2c_dw_init_recovery_info(struct dw_i2c_dev *dev) rinfo->unprepare_recovery = i2c_dw_unprepare_recovery; adap->bus_recovery_info = rinfo; -dev_info (dev->dev,"running with gpio recovery mode! scl%s" , +dev_info (dev->dev,"running with GPIO recovery mode! scl%s" , rinfo->sda_gpiod ?",sda" :"" );return 0 ;
@@ -1053,7 +1056,7 @@ int i2c_dw_probe_master(struct dw_i2c_dev *dev) ret =devm_request_irq (dev->dev, dev->irq, i2c_dw_isr, irq_flags,dev_name (dev->dev), dev);if (ret) { -dev_err (dev->dev,"failure requesting irq %i: %d\n" , +dev_err (dev->dev,"failure requesting IRQ %i: %d\n" , dev->irq, ret);return ret; }
drivers/i2c/busses/i2c-designware-platdrv.c +2 -2
@@ -72,7 +72,7 @@ static int bt1_i2c_write(void *context, unsigned int reg, unsigned int val)return ret;return regmap_write (dev->sysmap,BT1_I2C_CTL , -BT1_I2C_CTL_GO |BT1_I2C_CTL_WR | (reg &BT1_I2C_CTL_ADDR_MASK )); +BT1_I2C_CTL_GO |BT1_I2C_CTL_WR | (reg &BT1_I2C_CTL_ADDR_MASK )); }static struct regmap_config bt1_i2c_cfg = {
@@ -304,7 +304,7 @@ static int dw_i2c_plat_probe(struct platform_device *pdev) adap = &dev->adapter; adap->owner =THIS_MODULE ; adap->class =dmi_check_system (dw_i2c_hwmon_class_dmi) ? -I2C_CLASS_HWMON :I2C_CLASS_DEPRECATED ; +I2C_CLASS_HWMON :I2C_CLASS_DEPRECATED ; adap->nr =-1 ;if (dev->flags &ACCESS_NO_IRQ_SUSPEND )
drivers/i2c/busses/i2c-designware-slave.c +4 -2
@@ -32,12 +32,14 @@ static void i2c_dw_configure_fifo_slave(struct dw_i2c_dev *dev) }/** -* i2c_dw_init_slave() - Initialize the designware i2c slave hardware +* i2c_dw_init_slave() - Initialize the DesignWare i2c slave hardware * @dev: device private data * * This function configures and enables the I2C in slave mode. * This function is called during I2C init function, and in case of timeout at * run time. +* +* Return: 0 on success, or negative errno otherwise. */ static int i2c_dw_init_slave (struct dw_i2c_dev *dev) {
@@ -264,7 +266,7 @@ int i2c_dw_probe_slave(struct dw_i2c_dev *dev) ret =devm_request_irq (dev->dev, dev->irq, i2c_dw_isr_slave,IRQF_SHARED ,dev_name (dev->dev), dev);if (ret) { -dev_err (dev->dev,"failure requesting irq %i: %d\n" , +dev_err (dev->dev,"failure requesting IRQ %i: %d\n" , dev->irq, ret);return ret; }
Signature · 1 line
2.43.0.rc1.1.gbec44491f096
Re: [PATCH v3 25/25] i2c: designware: Fix spelling and other issues in the comments
Quoted 4 lines · Andy Shevchenko
Fix spelling and other issues, such as kernel-doc reported about, in the comments. While at it, fix some indentation issues as well.
Signed-off-by Andy Shevchenko <[email protected]>
Quoted 242 lines
--- drivers/i2c/busses/i2c-designware-amdpsp.c | 10 +++++----- drivers/i2c/busses/i2c-designware-common.c | 8 +++++--- drivers/i2c/busses/i2c-designware-core.h | 10 +++++----- drivers/i2c/busses/i2c-designware-master.c | 15 +++++++++------ drivers/i2c/busses/i2c-designware-platdrv.c | 4 ++-- drivers/i2c/busses/i2c-designware-slave.c | 6 ++++-- 6 files changed, 30 insertions(+), 23 deletions(-)drivers/i2c/busses/i2c-designware-amdpsp.c +5
-5@@ -155,7 +155,7 @@ static void psp_release_i2c_bus_deferred(struct work_struct *work)/* * If there is any pending transaction, cannot release the bus here. -* psp_release_i2c_bus will take care of this later. +* psp_release_i2c_bus() will take care of this later. */ if (psp_i2c_access_count) goto cleanup;@@ -210,12 +210,12 @@ static void psp_release_i2c_bus(void) {mutex_lock (&psp_i2c_access_mutex); -/* Return early if mailbox was malfunctional */ +/* Return early if mailbox was malfunctioned */ if (psp_i2c_mbox_fail) goto cleanup;/* -* If we are last owner of PSP semaphore, need to release aribtration +* If we are last owner of PSP semaphore, need to release arbitration * via mailbox. */ psp_i2c_access_count--;@@ -235,9 +235,9 @@ static void psp_release_i2c_bus(void)/* * Locking methods are based on the default implementation from -* drivers/i2c/i2c-core-base.c, but with psp acquire and release operations +* drivers/i2c/i2c-core-base.c, but with PSP acquire and release operations * added. With this in place we can ensure that i2c clients on the bus shared -* with psp are able to lock HW access to the bus for arbitrary number of +* with PSP are able to lock HW access to the bus for arbitrary number of * operations - that is e.g. write-wait-read. */ static void i2c_adapter_dw_psp_lock_bus(struct i2c_adapter *adapter,drivers/i2c/busses/i2c-designware-common.c +5
-3@@ -127,6 +127,8 @@ static int dw_reg_write_word(void *context, unsigned int reg, unsigned int val)* Autodetects needed register access mode and creates the regmap with * corresponding read/write callbacks. This must be called before doing any * other register access. +* +* Return: 0 on success, or negative errno otherwise. */ int i2c_dw_init_regmap (struct dw_i2c_dev *dev) {@@ -174,7 +176,7 @@ int i2c_dw_init_regmap(struct dw_i2c_dev *dev)/* * Note we'll check the return value of the regmap IO accessors only * at the probe stage. The rest of the code won't do this because -* basically we have MMIO-based regmap so non of the read/write methods +* basically we have MMIO-based regmap, so none of the read/write methods * can fail. */ dev->map =devm_regmap_init (dev->dev,NULL , dev, &map_cfg);@@ -336,7 +338,7 @@ static u32 i2c_dw_acpi_round_bus_speed(struct device *device) acpi_speed =i2c_acpi_find_bus_speed (device);/* -* Some DSTDs use a non standard speed, round down to the lowest +* Some DSDTs use a non standard speed, round down to the lowest * standard speed. */ for (i =0 ; i <ARRAY_SIZE (supported_speeds); i++) {@@ -532,7 +534,7 @@ void __i2c_dw_disable(struct dw_i2c_dev *dev)/* * Wait 10 times the signaling period of the highest I2C -* transfer supported by the driver (for 400KHz this is +* transfer supported by the driver (for 400kHz this is * 25us) as described in the DesignWare I2C databook. */ usleep_range (25 ,250 );drivers/i2c/busses/i2c-designware-core.h +5
-5@@ -141,10 +141,10 @@#define DW_IC_SLAVE 1/* -* Hardware abort codes from the DW_IC_TX_ABRT_SOURCE register +* Hardware abort codes from the DW_IC_TX_ABRT_SOURCE register. * -* Only expected abort codes are listed here -* refer to the datasheet for the full list +* Only expected abort codes are listed here, +* refer to the datasheet for the full list. */ #define ABRT_7B_ADDR_NOACK 0#define ABRT_10ADDR1_NOACK 1@@ -201,7 +201,7 @@ struct i2c_dw_semaphore_callbacks;* @rst: optional reset for the controller * @slave: represent an I2C slave device * @get_clk_rate_khz: callback to retrieve IP specific bus speed -* @cmd_err: run time hadware error code +* @cmd_err: run time hardware error code * @msgs: points to an array of messages currently being transferred * @msgs_num: the number of elements in msgs * @msg_write_idx: the element index of the current tx message in the msgs array @@ -236,7 +236,7 @@ struct i2c_dw_semaphore_callbacks;* @release_lock: function to release a hardware lock on the bus * @semaphore_idx: Index of table with semaphore type attached to the bus. It's * -1 if there is no semaphore. -* @shared_with_punit: true if this bus is shared with the SoCs PUNIT +* @shared_with_punit: true if this bus is shared with the SoC's PUNIT * @init: function to initialize the I2C hardware * @set_sda_hold_time: callback to retrieve IP specific SDA hold timing * @mode: operation mode - DW_IC_MASTER or DW_IC_SLAVE drivers/i2c/busses/i2c-designware-master.c +9
-6@@ -168,12 +168,14 @@ static int i2c_dw_set_timings_master(struct dw_i2c_dev *dev) }/** -* i2c_dw_init_master() - Initialize the designware I2C master hardware +* i2c_dw_init_master() - Initialize the DesignWare I2C master hardware * @dev: device private data * * This functions configures and enables the I2C master. * This function is called during I2C init function, and in case of timeout at * run time. +* +* Return: 0 on success, or negative errno otherwise. */ static int i2c_dw_init_master (struct dw_i2c_dev *dev) {@@ -314,7 +316,7 @@ static int amd_i2c_dw_xfer_quirk(struct i2c_adapter *adap, struct i2c_msg *msgs,/* * Initiate the i2c read/write transaction of buffer length, * and poll for bus busy status. For the last message transfer, -* update the command with stopbit enable. +* update the command with stop bit enable. */ for (msg_itr_lmt = buf_len; msg_itr_lmt >0 ; msg_itr_lmt--) {if (msg_wrt_idx == num_msgs -1 && msg_itr_lmt ==1 )@@ -421,7 +423,7 @@ static int txgbe_i2c_dw_xfer_quirk(struct i2c_adapter *adap, struct i2c_msg *msg/* * Initiate (and continue) low level master read/write transaction. -* This function is only called from i2c_dw_isr, and pumping i2c_msg +* This function is only called from i2c_dw_isr(), and pumping i2c_msg * messages into the tx buffer. Even if the size of i2c_msg data is * longer than the size of the tx buffer, it handles everything. */ @@ -459,7 +461,8 @@ i2c_dw_xfer_msg(struct dw_i2c_dev *dev) buf = msgs[dev->msg_write_idx].buf; buf_len = msgs[dev->msg_write_idx].len; -/* If both IC_EMPTYFIFO_HOLD_MASTER_EN and +/* +* If both IC_EMPTYFIFO_HOLD_MASTER_EN and * IC_RESTART_EN are set, we must manually * set restart bit between messages. */ @@ -949,7 +952,7 @@ static int i2c_dw_init_recovery_info(struct dw_i2c_dev *dev) rinfo->unprepare_recovery = i2c_dw_unprepare_recovery; adap->bus_recovery_info = rinfo; -dev_info (dev->dev,"running with gpio recovery mode! scl%s" , +dev_info (dev->dev,"running with GPIO recovery mode! scl%s" , rinfo->sda_gpiod ?",sda" :"" );return 0 ;@@ -1053,7 +1056,7 @@ int i2c_dw_probe_master(struct dw_i2c_dev *dev) ret =devm_request_irq (dev->dev, dev->irq, i2c_dw_isr, irq_flags,dev_name (dev->dev), dev);if (ret) { -dev_err (dev->dev,"failure requesting irq %i: %d\n" , +dev_err (dev->dev,"failure requesting IRQ %i: %d\n" , dev->irq, ret);return ret; }drivers/i2c/busses/i2c-designware-platdrv.c +2
-2@@ -72,7 +72,7 @@ static int bt1_i2c_write(void *context, unsigned int reg, unsigned int val)return ret;return regmap_write (dev->sysmap,BT1_I2C_CTL , -BT1_I2C_CTL_GO |BT1_I2C_CTL_WR | (reg &BT1_I2C_CTL_ADDR_MASK )); +BT1_I2C_CTL_GO |BT1_I2C_CTL_WR | (reg &BT1_I2C_CTL_ADDR_MASK )); }static struct regmap_config bt1_i2c_cfg = {@@ -304,7 +304,7 @@ static int dw_i2c_plat_probe(struct platform_device *pdev) adap = &dev->adapter; adap->owner =THIS_MODULE ; adap->class =dmi_check_system (dw_i2c_hwmon_class_dmi) ? -I2C_CLASS_HWMON :I2C_CLASS_DEPRECATED ; +I2C_CLASS_HWMON :I2C_CLASS_DEPRECATED ; adap->nr =-1 ;if (dev->flags &ACCESS_NO_IRQ_SUSPEND )drivers/i2c/busses/i2c-designware-slave.c +4
-2@@ -32,12 +32,14 @@ static void i2c_dw_configure_fifo_slave(struct dw_i2c_dev *dev) }/** -* i2c_dw_init_slave() - Initialize the designware i2c slave hardware +* i2c_dw_init_slave() - Initialize the DesignWare i2c slave hardware * @dev: device private data * * This function configures and enables the I2C in slave mode. * This function is called during I2C init function, and in case of timeout at * run time. +* +* Return: 0 on success, or negative errno otherwise. */ static int i2c_dw_init_slave (struct dw_i2c_dev *dev) {@@ -264,7 +266,7 @@ int i2c_dw_probe_slave(struct dw_i2c_dev *dev) ret =devm_request_irq (dev->dev, dev->irq, i2c_dw_isr_slave,IRQF_SHARED ,dev_name (dev->dev), dev);if (ret) { -dev_err (dev->dev,"failure requesting irq %i: %d\n" , +dev_err (dev->dev,"failure requesting IRQ %i: %d\n" , dev->irq, ret);return ret; }