Booting on J200
I have built my own kernels and modified them some, but have also used the prebuilt kernels, I have had no success figuring out what hangs the kernel but anyhow, I will tell of my testing of the 1999-10-19 and 1999-11-13. And Hopefully I will recieve some help, _TIA_
--
1999-10-19: Hangs at transfering control to kernel
--
1999-11-13: Hnags after:
Transfering control to kernel. (At entry point 0x00010000) kernel(0x00148C80, 0x00504010, 0x00148C80, 0x00016640) Clear BSS 0x0011B048 --> 0x0013D384
Boot Loader: PA/Linux, maybe PALOreal_mode setup exiting
--
1999-11-17 CVS snapshot with some of my own modif. to try to solve the hanging at real_mode.
__Will not build__
Signature · 1 line
Carl Johnson
A message that is not in the archive (sent off-list or not yet received): 99120220503901.00296@P100
Thanks Helge:
I never said I looked at the obvious first! Poor planning/thinking on my part. I did however about 2 secs before reading your post did recompile a FRESH ("VIRGIN") source and did manipulate the command line and get it to give me a Pengiun powered PA with a shell!
Thanks Anyhow!
Quoted 31 lines · Helge Deller
Am Wed, 01 Dec 1999 schrieb Carl Johnson:
Quoted 9 lines
I have built my own kernels and modified them some, but have also used the prebuilt kernels, I have had no success figuring out what hangs the kernel but anyhow, I will tell of my testing of the 1999-10-19 and 1999-11-13. And Hopefully I will recieve some help, _TIA_
--
1999-10-19: Hangs at transfering control to kernelQuoted 9 lines
--
1999-11-13: Hnags after:Transfering control to kernel. (At entry point
0x00010000)kernel(0x00148C80, 0x00504010, 0x00148C80, 0x00016640)Clear BSS0x0011B048-->0x0013D384
Boot Loader: PA/Linux, maybe PALOreal_modesetup exitingHello Carl,
Are you shure, that the outputs doesn´t go to the first COM-Port as default (in which case you would never see something more on the screen)...
Check /arch/parisc/boot/boot_code/ipl_c.c and search for " console=ttyS0 " ... You would have to modify this (console=tty0) ** OR ** start the machine with "boot pri isl" and modify the command-line.
Helge Deller.
Signature · 1 line
Carl Johnson