Skip to contentSkip to conversation

2.2.19pre - Kernel Panic: no init found

DISCUSSION Stephane GARIN 2 participants 3 messages Mar 6, 2001 1 message not in the archive

lore
Share & tools
lore

A message that is not in the archive (sent off-list or not yet received): [email protected]

#1 lore raw

Hi,

I tried with init=/bin/sh but no success. I download a 2.2.18 Kernel and I use patch 2.2.19pre16 but no success too... I don't know why there is this error with this 2.2.19 kernel but not with my 2.2.18 kernel. I'm ready to send all technical information about my computer (PIII 650 with 256Mb and a ABIT BX133-RAID mothercard).

With Regards,
Stephane Garin

-----Message d'origine-----
De : James Stevenson
Envoyé : samedi 3 mars 2001 18:58
À : [email protected]
Objet : Re: 2.2.19pre - Kernel Panic: no init found

Hi

it would mean pass something like
init=/bin/sh
not the runlevel you want

Quoted 3 lines · you

Hi,

I have a kernel panic with the patch 2.2.19pre16 that I test. I use a

2.2.18

Quoted 19 lines

Kernel very well. I used the last patch on this kernel and make my kernel with sames parameters without error message. At the boot, I can see this :

..
eth0: RealTek RTL8139 Fast Ethernet at 0xa800, IRQ 10, 00:50:fc:0b:60:70
eth1: RealTek RTL8139 Fast Ethernet at 0xac00, IRQ 11, 00:50:fc:1f:c1:98 Partition check:
hda: hda1 hda2 < hda5 hda6 hda7 hda8 hda9 hda10 >
Trying to vfree() noexistent vm area (c00f0000)
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 68k freed

Kernel panic: No init found. Try passing init= option to kernel.

I tried to start with init=3 but no change. I send this information on this mailing list because I think that could be a bug. Sorry if it is a wrong action of me...

Quoted 9 lines

With Regards,
Stephane Garin

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

--
---------------------------------------------
Check Out: http://stev.org
E-Mail: [email protected]
5:50pm up 4 days, 5:56, 3 users, load average: 0.24, 0.38, 0.47

#2 lore raw
Quoted 7 lines · Stephane GARIN

Hi,

I tried with init=/bin/sh but no success. I download a 2.2.18 Kernel and I use patch 2.2.19pre16 but no success too... I don't know why there is this error with this 2.2.19 kernel but not with my 2.2.18 kernel. I'm ready to send all technical information about my computer (PIII 650 with 256Mb and a ABIT BX133-RAID mothercard).

looks like you have a lot of partitions. maybe the kernel isn't using the right one
for root filesystem? if using LILO to boot, make sure root= line for your new kernel is the same as old one. if using redhat on a large disk, it will set up

the first partition as /boot filesystem, so kernel will mount it ok, but won't find any programs like init or sh on it.

Let me know how this works out.

Quoted 41 lines

With Regards,
Stephane Garin

-----Message d'origine-----
De : James Stevenson
Envoyé : samedi 3 mars 2001 18:58
À : [email protected]
Objet : Re: 2.2.19pre - Kernel Panic: no init found

Hi

it would mean pass something like
init=/bin/sh
not the runlevel you want

Quoted 3 lines · you

Hi,

I have a kernel panic with the patch 2.2.19pre16 that I test. I use a

2.2.18

Quoted 19 lines

Kernel very well. I used the last patch on this kernel and make my kernel with sames parameters without error message. At the boot, I can see this :

..
eth0: RealTek RTL8139 Fast Ethernet at 0xa800, IRQ 10, 00:50:fc:0b:60:70
eth1: RealTek RTL8139 Fast Ethernet at 0xac00, IRQ 11, 00:50:fc:1f:c1:98 Partition check:
hda: hda1 hda2 < hda5 hda6 hda7 hda8 hda9 hda10 >
Trying to vfree() noexistent vm area (c00f0000)
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 68k freed

Kernel panic: No init found. Try passing init= option to kernel.

I tried to start with init=3 but no change. I send this information on this mailing list because I think that could be a bug. Sorry if it is a wrong action of me...

#3 lore raw

I checked this but there is no error in my lilo configuration file. root value is the same for my images /boot/vmlinuz-2.2.18 (label=linux) and /boot/vmlinuz-2.2.19pre (label=linuxpre).

All it's ok if I boot on "linux" but I have this Kernel panic if I boot on "linuxpre". I used the same .config file (of 2.2.18 kernel) to make my new 2.2.19pre16 kernel.

I have lot of partitions (8). The order is :

/dev/hda1  (mounted on /boot)
/dev/hda2  (extended)
/dev/hda5  (mounted on /usr)
/dev/hda6  (mounted on /home)
/dev/hda7  (swap)
/dev/hda8  (mounted on /)
/dev/hda9  (mounted on /tmp)

/dev/hda10 (mounted on /var)

-----Original Message-----
From: [email protected] [mailto:[email protected]]On Behalf Of Jeremy Jackson
Sent: Tuesday, March 06, 2001 5:18 PM
To: Stephane GARIN
Cc: [email protected]
Subject: Re: 2.2.19pre - Kernel Panic: no init found

Quoted 6 lines · Stephane GARIN

Hi,

I tried with init=/bin/sh but no success. I download a 2.2.18 Kernel and I use patch 2.2.19pre16 but no success too... I don't know why there is this error with this 2.2.19 kernel but not with my 2.2.18 kernel. I'm ready to send all technical information about my computer (PIII 650 with 256Mb and

a

Quoted 1 line

ABIT BX133-RAID mothercard).

looks like you have a lot of partitions. maybe the kernel isn't using the right one
for root filesystem? if using LILO to boot, make sure root= line for your new
kernel is the same as old one. if using redhat on a large disk, it will set up

the first partition as /boot filesystem, so kernel will mount it ok, but won't
find any programs like init or sh on it.

Let me know how this works out.

Quoted 17 lines

With Regards,
Stephane Garin

-----Message d'origine-----
De : James Stevenson
Envoyé : samedi 3 mars 2001 18:58
À : [email protected]
Objet : Re: 2.2.19pre - Kernel Panic: no init found

Hi

it would mean pass something like
init=/bin/sh
not the runlevel you want

Quoted 7 lines
Quoted 3 lines · you

Hi,

I have a kernel panic with the patch 2.2.19pre16 that I test. I use a

2.2.18

Quoted 2 lines

Kernel very well. I used the last patch on this kernel and make my kernel with sames parameters without error message. At the boot, I can see this

:

Quoted 13 lines
Quoted 13 lines

..
eth0: RealTek RTL8139 Fast Ethernet at 0xa800, IRQ 10, 00:50:fc:0b:60:70
eth1: RealTek RTL8139 Fast Ethernet at 0xac00, IRQ 11, 00:50:fc:1f:c1:98 Partition check:
hda: hda1 hda2 < hda5 hda6 hda7 hda8 hda9 hda10 >
Trying to vfree() noexistent vm area (c00f0000)
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 68k freed

Kernel panic: No init found. Try passing init= option to kernel.
Quoted 1 line
Quoted 1 line

I tried to start with init=3 but no change. I send this information on

this

Quoted 3 lines
Quoted 3 lines

mailing list because I think that could be a bug. Sorry if it is a wrong action of me...

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/