2.2.19pre - Kernel Panic: no init found
A message that is not in the archive (sent off-list or not yet received): [email protected]
Hi,
I tried with init=/bin/sh but no success. I download a 2.2.18 Kernel and I use patch 2.2.19pre16 but no success too... I don't know why there is this error with this 2.2.19 kernel but not with my 2.2.18 kernel. I'm ready to send all technical information about my computer (PIII 650 with 256Mb and a ABIT BX133-RAID mothercard).
With Regards,
Stephane Garin
-----Message d'origine-----
De : James Stevenson
Envoyé : samedi 3 mars 2001 18:58
À : [email protected]
Objet : Re: 2.2.19pre - Kernel Panic: no init found
Hi
it would mean pass something like
init=/bin/sh
not the runlevel you want
Quoted 3 lines · you
Hi,
I have a kernel panic with the patch 2.2.19pre16 that I test. I use a
2.2.18
Quoted 19 lines
Kernel very well. I used the last patch on this kernel and make my kernel with sames parameters without error message. At the boot, I can see this :
..
eth0: RealTek RTL8139 Fast Ethernet at0xa800, IRQ 10, 00:50:fc:0b:60:70
eth1: RealTek RTL8139 Fast Ethernet at0xac00, IRQ 11, 00:50:fc:1f:c1:98 Partition check:
hda: hda1 hda2 < hda5 hda6 hda7 hda8 hda9 hda10 >
Trying tovfree()noexistent vm area (c00f0000)
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 68k freedKernel panic: No init found. Try passing init= option to kernel.I tried to start with init=3 but no change. I send this information on this mailing list because I think that could be a bug. Sorry if it is a wrong action of me...
Quoted 9 lines
With Regards,
Stephane Garin-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
--
---------------------------------------------
Check Out: http://stev.org
E-Mail: [email protected]
5:50pm up 4 days, 5:56, 3 users, load average: 0.24, 0.38, 0.47
Quoted 7 lines · Stephane GARIN
Hi,
I tried with init=/bin/sh but no success. I download a 2.2.18 Kernel and I use patch 2.2.19pre16 but no success too... I don't know why there is this error with this 2.2.19 kernel but not with my 2.2.18 kernel. I'm ready to send all technical information about my computer (PIII 650 with 256Mb and a ABIT BX133-RAID mothercard).
looks like you have a lot of partitions. maybe the kernel isn't using the right one
for root filesystem? if using LILO to boot, make sure root= line for your new kernel is the same as old one. if using redhat on a large disk, it will set up
the first partition as /boot filesystem, so kernel will mount it ok, but won't find any programs like init or sh on it.
Let me know how this works out.
Quoted 41 lines
With Regards,
Stephane Garin-----Message d'origine-----
De : James Stevenson
Envoyé : samedi 3 mars 2001 18:58
À : [email protected]
Objet : Re: 2.2.19pre - Kernel Panic: no init foundHi
it would mean pass something like
init=/bin/sh
not the runlevel you wantQuoted 3 lines · you
Hi,
I have a kernel panic with the patch 2.2.19pre16 that I test. I use a
2.2.18
Quoted 19 lines
Kernel very well. I used the last patch on this kernel and make my kernel with sames parameters without error message. At the boot, I can see this :
..
eth0: RealTek RTL8139 Fast Ethernet at0xa800, IRQ 10, 00:50:fc:0b:60:70
eth1: RealTek RTL8139 Fast Ethernet at0xac00, IRQ 11, 00:50:fc:1f:c1:98 Partition check:
hda: hda1 hda2 < hda5 hda6 hda7 hda8 hda9 hda10 >
Trying tovfree()noexistent vm area (c00f0000)
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 68k freedKernel panic: No init found. Try passing init= option to kernel.I tried to start with init=3 but no change. I send this information on this mailing list because I think that could be a bug. Sorry if it is a wrong action of me...
I checked this but there is no error in my lilo configuration file. root value is the same for my images /boot/vmlinuz-2.2.18 (label=linux) and /boot/vmlinuz-2.2.19pre (label=linuxpre).
All it's ok if I boot on "linux" but I have this Kernel panic if I boot on "linuxpre". I used the same .config file (of 2.2.18 kernel) to make my new 2.2.19pre16 kernel.
I have lot of partitions (8). The order is :
/dev/hda1 (mounted on /boot) /dev/hda2 (extended) /dev/hda5 (mounted on /usr) /dev/hda6 (mounted on /home) /dev/hda7 (swap) /dev/hda8 (mounted on /) /dev/hda9 (mounted on /tmp)
/dev/hda10 (mounted on /var)
-----Original Message-----
From: [email protected] [mailto:[email protected]]On Behalf Of Jeremy Jackson
Sent: Tuesday, March 06, 2001 5:18 PM
To: Stephane GARIN
Cc: [email protected]
Subject: Re: 2.2.19pre - Kernel Panic: no init found
Quoted 6 lines · Stephane GARIN
Hi,
I tried with init=/bin/sh but no success. I download a 2.2.18 Kernel and I use patch 2.2.19pre16 but no success too... I don't know why there is this error with this 2.2.19 kernel but not with my 2.2.18 kernel. I'm ready to send all technical information about my computer (PIII 650 with 256Mb and
a
Quoted 1 line
ABIT BX133-RAID mothercard).
looks like you have a lot of partitions. maybe the kernel isn't using the right one
for root filesystem? if using LILO to boot, make sure root= line for your new
kernel is the same as old one. if using redhat on a large disk, it will set up
the first partition as /boot filesystem, so kernel will mount it ok, but won't
find any programs like init or sh on it.
Let me know how this works out.
Quoted 17 lines
With Regards,
Stephane Garin-----Message d'origine-----
De : James Stevenson
Envoyé : samedi 3 mars 2001 18:58
À : [email protected]
Objet : Re: 2.2.19pre - Kernel Panic: no init foundHi
it would mean pass something like
init=/bin/sh
not the runlevel you want
Quoted 7 lines
Quoted 3 lines · you
Hi,
I have a kernel panic with the patch 2.2.19pre16 that I test. I use a
2.2.18
Quoted 2 lines
Kernel very well. I used the last patch on this kernel and make my kernel with sames parameters without error message. At the boot, I can see this
:
Quoted 13 lines
Quoted 13 lines
..
eth0: RealTek RTL8139 Fast Ethernet at0xa800, IRQ 10, 00:50:fc:0b:60:70
eth1: RealTek RTL8139 Fast Ethernet at0xac00, IRQ 11, 00:50:fc:1f:c1:98 Partition check:
hda: hda1 hda2 < hda5 hda6 hda7 hda8 hda9 hda10 >
Trying tovfree()noexistent vm area (c00f0000)
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 68k freedKernel panic: No init found. Try passing init= option to kernel.
Quoted 1 line
Quoted 1 line
I tried to start with init=3 but no change. I send this information on
this
Quoted 3 lines
Quoted 3 lines
mailing list because I think that could be a bug. Sorry if it is a wrong action of me...
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/