USB trouble w/ 2.4.8-ac12
Using 2.4.8-ac12, USB modules, and a Philips CDRW400.
I was able to get it to see the CDRW drive once(and that took a minute or three), but mostly it only sees the Freecom USB-IDE bridge.
How do I get the usb code to probe the ATAPI bridge for the devices behind it??
TIA
tabris
Quoted 7 lines · Adam Schrotenboer
Using 2.4.8-ac12, USB modules, and a Philips CDRW400.
I was able to get it to see the CDRW drive once(and that took a minute or three), but mostly it only sees the Freecom USB-IDE bridge.
How do I get the usb code to probe the ATAPI bridge for the devices behind it??
You might try asking on the linux-usb-devel mailing list. I don't know how well the Freecom bridge device is currently supported in Linux.
greg k-h
The Freecom dongle is well supported for Tape drives (the OnStream USB-30, in particular), but I haven't gotten it working for other devices yet.
I'm just short on time to work on this.... so if someone is offering to help, that would be a good thing.
Matt
Quoted 18 lines · Greg KH
Quoted 7 lines · Adam Schrotenboer
Using 2.4.8-ac12, USB modules, and a Philips CDRW400.
I was able to get it to see the CDRW drive once(and that took a minute or three), but mostly it only sees the Freecom USB-IDE bridge.
How do I get the usb code to probe the ATAPI bridge for the devices behind it??
You might try asking on the linux-usb-devel mailing list. I don't know how well the Freecom bridge device is currently supported in Linux.
greg k-h
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Signature · 8 lines
Matthew Dharm Home: [email protected] Maintainer, Linux USB Mass Storage Driver A: The most ironic oxymoron wins ... DP: "Microsoft Works" A: Uh, okay, you win. -- A.J. & Dust Puppy User Friendly, 1/18/1998
Quoted 2 lines · Matthew Dharm
The Freecom dongle is well supported for Tape drives (the OnStream USB-30, in particular), but I haven't gotten it working for other devices yet.
Well, I don't know how much help I can be, but I am willing (given time [atm I'm unemployed, but attempting to remedy that]) to test patches.
Quoted 3 lines
I'm just short on time to work on this.... so if someone is offering to help, that would be a good thing.
Willing to do what I can.
Quoted 25 lines
Matt
Quoted 18 lines · Greg KH
Quoted 6 lines · Adam Schrotenboer
Using 2.4.8-ac12, USB modules, and a Philips CDRW400.
I was able to get it to see the CDRW drive once(and that took a minute or three), but mostly it only sees the Freecom USB-IDE bridge.
How do I get the usb code to probe the ATAPI bridge for the devices behind it??
You might try asking on the linux-usb-devel mailing list. I don't know how well the Freecom bridge device is currently supported in Linux.
greg k-h
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/