Skip to contentSkip to conversation

USB trouble w/ 2.4.8-ac12

DISCUSSION Adam Schrotenboer 3 participants 4 messages Sep 1, 2001 – Sep 2, 2001

lore
Share & tools
lore
#0 lore raw

Using 2.4.8-ac12, USB modules, and a Philips CDRW400.

I was able to get it to see the CDRW drive once(and that took a minute or three), but mostly it only sees the Freecom USB-IDE bridge.

How do I get the usb code to probe the ATAPI bridge for the devices behind it??

TIA
tabris

#1 lore raw
Quoted 7 lines · Adam Schrotenboer

Using 2.4.8-ac12, USB modules, and a Philips CDRW400.

I was able to get it to see the CDRW drive once(and that took a minute or three), but mostly it only sees the Freecom USB-IDE bridge.

How do I get the usb code to probe the ATAPI bridge for the devices behind it??

You might try asking on the linux-usb-devel mailing list. I don't know how well the Freecom bridge device is currently supported in Linux.

greg k-h

#2 lore raw
In reply to Adam Schrotenboer

The Freecom dongle is well supported for Tape drives (the OnStream USB-30, in particular), but I haven't gotten it working for other devices yet.

I'm just short on time to work on this.... so if someone is offering to help, that would be a good thing.

Matt

Quoted 18 lines · Greg KH
Quoted 7 lines · Adam Schrotenboer

Using 2.4.8-ac12, USB modules, and a Philips CDRW400.

I was able to get it to see the CDRW drive once(and that took a minute or three), but mostly it only sees the Freecom USB-IDE bridge.

How do I get the usb code to probe the ATAPI bridge for the devices behind it??

You might try asking on the linux-usb-devel mailing list. I don't know how well the Freecom bridge device is currently supported in Linux.

greg k-h
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

Signature · 8 lines
Matthew Dharm                              Home: [email protected] 
Maintainer, Linux USB Mass Storage Driver

A:  The most ironic oxymoron wins ...
DP: "Microsoft Works"
A:  Uh, okay, you win.
					-- A.J. & Dust Puppy
User Friendly, 1/18/1998
#3 lore raw
In reply to Adam Schrotenboer
Quoted 2 lines · Matthew Dharm

The Freecom dongle is well supported for Tape drives (the OnStream USB-30, in particular), but I haven't gotten it working for other devices yet.

Well, I don't know how much help I can be, but I am willing (given time [atm I'm unemployed, but attempting to remedy that]) to test patches.

Quoted 3 lines

I'm just short on time to work on this.... so if someone is offering to help, that would be a good thing.

Willing to do what I can.

Quoted 25 lines

Matt

Quoted 18 lines · Greg KH
Quoted 6 lines · Adam Schrotenboer

Using 2.4.8-ac12, USB modules, and a Philips CDRW400.

I was able to get it to see the CDRW drive once(and that took a minute or three), but mostly it only sees the Freecom USB-IDE bridge.

How do I get the usb code to probe the ATAPI bridge for the devices behind it??

You might try asking on the linux-usb-devel mailing list. I don't know how well the Freecom bridge device is currently supported in Linux.

greg k-h
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/