Skip to contentSkip to conversation

2 IDE cd-roms + ide-scsi = 4 scsi cdroms ???

DISCUSSION Douglas Gilbert 2 participants 2 messages Sep 15, 2001

lore
Share & tools
lore
#0 lore raw
Quoted 6 lines · Joseph Cheek

i added a second ide cdrom to this system and now notice that i have four scsi cdroms show up. really weird. this was on 2.4.7-ac10 and repros on 2.4.9-ac10.

when i had one cdrom (/dev/hdc) i had just one scsi cdrom after loading ide-scsi (/dev/sr0).

Joseph,
Try turning off CONFIG_SCSI_MULTI_LUN in your kernel config and recompile your kernel (or modules in your case because lsmod shows all your scsi components are modules).

This will stop 2 luns being seen for each actual
device.

Doug Gilbert

#1 lore raw
Quoted 7 lines · Douglas Gilbert

Joseph,
Try turning off CONFIG_SCSI_MULTI_LUN in your kernel config and recompile your kernel (or modules in your case because lsmod shows all your scsi components are modules).

This will stop 2 luns being seen for each actual
device.

So then here's a question:

Why does the ide-scsi driver provide 2 LUN's? I can understand in the case of changers/jukeboxes, but why for single-disc drives?

Signature · 1 line
Ignacio Vazquez-Abrams  <[email protected]>