2 IDE cd-roms + ide-scsi = 4 scsi cdroms ???
Quoted 6 lines · Joseph Cheek
i added a second ide cdrom to this system and now notice that i have four scsi cdroms show up. really weird. this was on 2.4.7-ac10 and repros on 2.4.9-ac10.
when i had one cdrom (
/dev/hdc) i had just one scsi cdrom after loading ide-scsi (/dev/sr0).
Joseph,
Try turning off CONFIG_SCSI_MULTI_LUN in your kernel config and recompile your kernel (or modules in your case because lsmod shows all your scsi components are modules).
This will stop 2 luns being seen for each actual
device.
Doug Gilbert
Quoted 7 lines · Douglas Gilbert
Joseph,
Try turning offCONFIG_SCSI_MULTI_LUNin your kernel config and recompile your kernel (or modules in your case because lsmod shows all your scsi components are modules).This will stop 2 luns being seen for each actual
device.
So then here's a question:
Why does the ide-scsi driver provide 2 LUN's? I can understand in the case of changers/jukeboxes, but why for single-disc drives?
Signature · 1 line
Ignacio Vazquez-Abrams <[email protected]>