Skip to contentSkip to conversation

Small bug with ZYNX 4-Port NIC (Tulip driver)

DISCUSSION Ben Greear 1 participant 1 message Oct 23, 2001

lore
Share & tools
lore

Ben Greear

author
#0 lore raw

Regarding the tulip driver that comes default with 2.4.13-pre5:

There seems to be a problem with the ZYNX 4-port NIC. It auto-negotiates and brings it's link up, but it's advertise bits are set to (only) 10bt-FD. If I force the bits to 10/100 FD/HD (all 4 set, in other words), then the NIC briefly reports this setting (while LINK is DOWN), but as soon as it completes it's autonegotiation, the advert bits are once again set to 10bt-FD.

I do NOT see this problem on the D-LINK 4-port NIC or the EEPRO NICs I've been testing with....

Thanks,
Ben

Signature · 3 lines
Ben Greear <[email protected]>       <Ben_Greear AT excite.com>
President of Candela Technologies Inc      http://www.candelatech.com
ScryMUD:  http://scry.wanfear.com     http://scry.wanfear.com/~greear