Small bug with ZYNX 4-Port NIC (Tulip driver)
Regarding the tulip driver that comes default with 2.4.13-pre5:
There seems to be a problem with the ZYNX 4-port NIC. It auto-negotiates and brings it's link up, but it's advertise bits are set to (only) 10bt-FD. If I force the bits to 10/100 FD/HD (all 4 set, in other words), then the NIC briefly reports this setting (while LINK is DOWN), but as soon as it completes it's autonegotiation, the advert bits are once again set to 10bt-FD.
I do NOT see this problem on the D-LINK 4-port NIC or the EEPRO NICs I've been testing with....
Thanks,
Ben
Signature · 3 lines
Ben Greear <[email protected]> <Ben_Greear AT excite.com> President of Candela Technologies Inc http://www.candelatech.com ScryMUD: http://scry.wanfear.com http://scry.wanfear.com/~greear