Skip to contentSkip to conversation

Problem with gigabit NIC acenic: 3c985b-sx

DISCUSSION Chun-Ying Huang 2 participants 2 messages Nov 6, 2001

lore
Share & tools
lore
#0 lore raw

Dear all:

I've install a 3c985b-sx NIC on my linux 2.4.13 box. But when loading the 'acenic' module, it shows the message:

eth1: 3Com 3C985 Gigabit Ethernet at 0xdf020000, irq 10
Tigon II (Rev. 6), Firmware: 12.4.11, MAC: 00:60:08:f7:04:1e PCI bus width: 32 bits, speed: 33MHz, latency: 64 clks
eth1: Firmware NOT running!

(PS. My eth0 is an intel eepro100)

It seems the driver detect the card but can't work. Is this a bug of my NIC firmware or a problem of the driver? Or what necessary steps I've missed?

Thanks in advance.

PS. Please CC your replis to me, thank you in advance.:)

--
Regards,
huangant <Chun-Ying Huang>

#1 lore raw
Quoted 10 lines · Chun-Ying Huang

Dear all:

I've install a 3c985b-sx NIC on my linux 2.4.13 box. But when loading the 'acenic' module, it shows the message:

eth1: 3Com 3C985 Gigabit Ethernet at 0xdf020000, irq 10
Tigon II (Rev. 6), Firmware: 12.4.11, MAC: 00:60:08:f7:04:1e PCI bus width: 32 bits, speed: 33MHz, latency: 64 clks
eth1: Firmware NOT running!

should be fixed in 2.4.14.

Signature · 3 lines
Jeff Garzik      | Only so many songs can be sung
Building 1024    | with two lips, two lungs, and one tongue.
MandrakeSoft     |         - nomeansno