please help with pppoe
hello,
by now i am very frusterated because i'm not sure whats going on and i don't have any clue on whats required to fix this.
i'm trying to get pppoe to work from linux. i already have it working from windows nt and windows xp.
i am running suse 7.3 professional.
my kernel is 2.4.16-4gb (k_deflt made by suse)
i have these packages installed
smpppd-0.49-7 (and yes, smpppd is running)
ppp-2.4.1-170
rp-pppoe-3.4-1
my /etc/ppp/options file goes like this:
hide-password
lock
local
nocrtscts
sync
noauth
noaccomp
mtu 1484
mru 1484
noipdefault
noipx
novj
novjccomp
debug
username "(username)@covad.net"
my /etc/ppp/pap-secret is like this
"(username)@covad.net" * "(password)"
i have been trying to get this pppoe to work by running:
pppoe -I eth1
pppoe -D -d 9 -I eth1
adsl-start
please help
lee leahu
[email protected]
Quoted 6 lines · lee Leahu
hello,
by now i am very frusterated because i'm not sure whats going on and i don't have any clue on whats required to fix this.
i'm trying to get pppoe to work from linux. i already have it working from windows nt and windows xp.
Quoted 9 lines
i am running suse 7.3 professional.
my kernel is 2.4.16-4gb (k_defltmade by suse)i have these packages installed
smpppd-0.49-7 (and yes, smpppd is running)
ppp-2.4.1-170
rp-pppoe-3.4-1
I'm using the rp pppoe patch and 2.4.19-pre6. I setup my options/user file and ran 'pppd eth0', worked perfectly the first time.
# cat /etc/ppp/options plugin rp-pppoe.so name <username> nodefaultroute
# cat /etc/ppp/pap-secrets <username> * <password>
# pppd --version Warning: plugin rp-pppoe.so has no version information Plugin rp-pppoe.so loaded. RP-PPPoE plugin version 3.3 compiled against pppd 2.4.2b1 pppd version 2.4.2b1
I don't use the DSL connection as my default route thus the 'nodefaultroute' statement.
It works very well save for frequent but seemingly innocuous OOPses.
-d
Quoted 5 lines · lee Leahu
i have these packages installed
smpppd-0.49-7 (and yes, smpppd is running)
ppp-2.4.1-170
rp-pppoe-3.4-1
^^^^^^^^^^^^^^^
You don't need this, if you want to use kernel-pppoe. This is another userspace-driver.
Quoted 11 lines
my
/etc/ppp/optionsfile goes like this:hide-password
lock
local
nocrtscts
sync
noauth
noaccomp
mtu 1484
mru 1484
Change this to 1492. You also have to add the PPPoE-Modul. You'll find a working config-file at [1]. Unfortunately with german comments, have a look in "man pppd" to figure out what all the options stand for. It could also be useful to activate "debug" and "kdebug 4" in the options-file. So you'll get a lot of interesting infos in /var/log/messages
Quoted 6 lines
noipdefault
noipx
novj
novjccomp
debug
username "(username)@covad.net"
^^^^^^^^^^
This have to be: user "(username)@covad.net" (see [1]).
Quoted 3 lines
i have been trying to get this pppoe to work by running:
pppoe -I eth1
pppoe -D -d 9 -I eth1
These are for Kernel-PPPoE with Kernel 2.2.x! With the options-file above you only have to use "pppd eth1".
Quoted 1 line
adsl-start
This is for rp-pppoe, not for Kernel-PPPoE!
Quoted 1 line
please help
Maybe you should post to the ppp-Mailinglist (linux-ppp at vger.kernel.org).
Bye,
Michael
In-Reply-To:
1. http://www.adsl4linux.de/pub/config/pppoed24x/tonline_tdsl/options
Signature · 4 lines
ADSL4Linux: http://www.adsl4linux.de Erste Hilfe im Webforum: http://www.adsl4linux.de/forum ADSL4Linux-Mailinglisten: http://www.adsl4linux.de/majordomo Lob/Kritik/Sonstiges: [email protected]